Problems with backlight coming on

I just got a new iPod classic and it works differently than my old one did.
If I am currently playing a song, with the switch on top set to the locked position, unlocking it does not turn on the backlight.
If nothing is playing, however, and I turn this switch to the unlocked position, the backlight will come on.
Is that normal, or is something wrong with my iPod?

FWIW, I've experienced the same key repeating issue on my Latitude E6540 too, running Debian Jessie, and the bios downgrade seems to have solved it. FWIW, I had no problem on windows for bios A10.
It would be great if Dell could fix that, indeed.

Similar Messages

Problem with backlight in muvo n

hi
i have problem with back light
when backlight is on i hear some noise in my headphone (ofcourse this noise is very weak)
when after 3 seconds backlight off this noise disapear
i update firmware in last version but i have still this problem
please help me

This is an documented feature of the player.
It is the result from hardware design. No firmware will be able to fix it.
See this thread for details.
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=26249&page=3
Cheers

We recently purchased the iphone5 (2) and are having problems with sound coming thru the earbuds when we plug them in to the iphones. works fine with the ipad. help please

recently purchased the iphone5 (2 of them) and are having problems with the earpods. no sound when plugged in to the iphone. both phones. works with the ipad. help please

Hi P5052,
Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
It is very unusual that neither phone is working with the new earpods.
Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
The article below will give you the basic troubleshooting steps for this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Can't hear through the receiver or speakers
Symptoms
When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy
<Edited by Host>

Problem with Email coming in

New email will no longer come into my mail on my iPhone 5. I have removed the email account and re-added it. That did not help. I have also restarted my phone and that has not helped. I can still send email from my phone. How do I fix this?

If you send email but not receive it there is most likely a problem with the outgoing mail server.
Go to Settings > Mail, Contacts, Calendar > tap on your email account > Outgoing Mail Server > tap on the outgoing Mail Server for your account.
Then triple check the entries there to make sure the user name, outgoing mail server and password are entered correctly. Check again to make sure. Even if the area is marked optional enter those three items.

Problem with backlight timer Off

Hi!
Just wanted to check if anybody had the same problem.
I've recently updated my iPod with the latest Updater (software version 1.1). Since that time, when the backlight timer is set to Off,it is impossible to switch the light on with pressed Menu key. When I press Menu for longer time nothing happens.
Was this feature disabled in the latest software of is it some kind of a bug?
Thanks
Luke
iPod Video Windows XP Pro

The only way I can think of to get the feature back is to "update" using an older updater, such as the one that came with your CD.
Reinstall the updater from the CD that came with your iPod would give you an older update that would contain the feature your looking for. Also using the "previous updaters" feature in the iPod folder on your computer would have the same effect. Update the iPod with one of these. However, bear in mind that newer features such as the volume limiter that are on the new 1.1.1 update would not be available.

Problem with backlight on keyboard. Mountain Lion.

Hi 2all.
I have some problem. I have MacBook Pro (early 2011), i7. Some days ago I upgrade my MacBook OS to Mountain Lion (clean install). In Snow Leopard I can turn off the backlight of keyboard, and then it will be off. If I need it, I turn it on. But now I have another situation. I turn off my backlight, but after log off user, or restart MacBook backlight of keyboard turns on... Whats happen?!
Thx fo help.
Best regards,
Kyros.

Lab Tick is a shareware menu item that gives you complete control over the keyboard backlight. You can set the level of illumination by hand, and electively disable automatic adjustments made by the OS.

Problem with backlight....

More correctly, problems when the backlight is NOT on.
I have a 3G iPod 15 gb and I can only see the screen when the backlight is on. If I power down the backlight then the text disappears. The same is true if the backlight threshhold is passed and the BL powers itself down. I have adjusted the contrast. No help. I have reset to default settings. No help. I have reset the iPod. No help.
Music plays just fine, but I can only see what is playing if I power up the backlight.
Displayless in Seattle...
DB

One of these Five Rs is restoring the iPod which you don't mention.
If you try that, and it doesn't help, I don't think there is much you can do except send it for repair. There are 3rd party options cheaper than Apple.

Problem with video coming back from fullscreen: duplicated controls

Hi there!
I'm using the following code to go fullscreen with a video, the video controls are set to autohide.
The problem comes when I close the full screen mode (by button or simply with scape) to normal mode, flash places a new video control that stays over the video and if I place the mouse over the movie I can see the autohiden controls appearing under the new added one.
Any hints?
Thanks.
flvControl.autoPlay = false;
flvControl.autoRewind = true;
flvControl.scaleMode = VideoScaleMode.EXACT_FIT;
flvControl.source = flvSource;
flvControl.skinAutoHide = true;
flvControl.addEventListener(Event.COMPLETE, onComplete);
function goFullScreen():void
    if (stage.displayState == StageDisplayState.NORMAL)
           stage.displayState=StageDisplayState.FULL_SCREEN;
    else
           stage.displayState=StageDisplayState.NORMAL;
flvControl.fullScreenButton.addEventListener(MouseEvent.CLICK, _handleClick)
function _handleClick(event:MouseEvent):void
    goFullScreen();

@Andrew Rosewarn
Hmm, that much I'm aware of...
Is there anything that can theoretically exist in the displayList that doesn't necessarily take up an index?
When I check the index on my main application, there are only 2 items. [0] and [1], yet the [1] component is still being covered up by something...
I tried not hiding the [0] component (visible = true) and I can see it, but there is some kind of overlay over it that restricts me from clicking of the buttons on that component. And the overlay has a partial opacity, which is slightly transparent...
If there is no such possibilty, that would mean that overlay is actually my [1] component... but it is slightly transparent and missing all visual indicators that it IS indeed the [1] component..
This only happens when I come go to fullscreen then come back from fullscreen before the video completes and all those functions run.
The [1] component gets added upon the videoDisplay.COMPLETE event, that fact along with double checking the index confirms that the sharingBookmarks component is indeed on the top of my display stack..
Any clues or directions are greatly appreciated, thanks!
DK
p.s. I can provide more code or answers to any questions if anyone is interested in solving this puzzle.

Problems with backlight timeout

I have BB 8120 pearl smartphone. The backlight times out after 30 seconds and I would like it to stay on longer. I know how to correctly change and save that value, yet it won't retain that information for more than a couple hours before I have to go back to the options application and "re-save" the information. I have removed and replaced the battery as well as re-installing the softwear and operating system. Any other ideas to try? The phone is about one month old and works well otherwise. Thanks in advance to all who respond.

The BBlight sounded alright but its not supported on my phone and I don't trust any of the sites that host it. I'd went with screenlight which is on the blackberry app world
http://appworld.blackberry.com/webstore/content/6808

Having problem with mackeeper coming on when searching how do I rid of this or other sites coming on under my search site

I tried to install mackeeper and thought it was free and because of popups and ads. Now I'm having more problem it comes up when searching. I would like to go back to week ago them the way my system works now to get rid of but don't know how and no one i know can tell me. Help I'm not computer smart

1. Uninstall MacKeeper as suggested by db24401.
2.Identify and remove adware
   http://www.thesafemac.com/arg/
   or
   download and run Adware Removal Tool.
    http://www.thesafemac.com/art/

Problems with sound coming from my bose compaion 5

Can anybody help me to sort out the sound issues with my bose companion 5 system, every now and then the sound goes all wavey

See if it matches any of these sounds: http://datacent.com/harddrivesounds.php

Since I upgraded, I am having problems with words coming out wrong. For example, it is supposed to say "Who's Online in the last 15 minutes;" it actually says "Xip(t pomjof jo uif mbtu 26 Njovuft;" but when I copy and paste, it comes out correct.

This is happening at a web site group I belong to, and it is only happening on a couple of certain pages that I can tell so far, not the whole web site. It doesn't happen if I go to that site using IE, so it has to be something in Firefox. I have tried looking at the font information, but that seems correct. I don't know how to fix this, but I can't read some of the words on this site anymore.

This is happening at a web site group I belong to, and it is only happening on a couple of certain pages that I can tell so far, not the whole web site. It doesn't happen if I go to that site using IE, so it has to be something in Firefox. I have tried looking at the font information, but that seems correct. I don't know how to fix this, but I can't read some of the words on this site anymore.

Problem with L193pC display: not coming on intermitently

Hi,
I have a problem with my new L193pC ThinkVision display. My setup is this:
- Lenovo laptop 3000 N200 0769-A8U with Windows XP and all the latest updates installed
- Lenovo L193pC display hooked up to the laptop's analog output
This is a work environment. I use this display in a dual screen setup along with the laptop's display. I Hibernate and take home my laptop every night, connect it back and resume from hibernation to the display every morning. Sometimes the L193 simply won't come on. The green power led is on but the dispaly itself is off. More problematic: when this problem occurs, turning off the display using the power button does not work!!!! It simply won't turn off. Pressing the power button has no effect. The only solution to this problem is to unplug the power to the display and plug it back in!!!! Not very nice.
If this information has any value: this morning when it happened I had used my laptop at home last night and the settings where for single display, the laptop's hi-res mode, on power up. Then I switched to my dual screen setup using the Fn-F7 presentation director software and selected my dual screen setup.
Is this the right place to report this problem? What other step should I take to get this problem resolved? Are there any firmware upgrade for these display?
regards,
Jacques Boileau

Early 2011
Last night's flashlight test, couldn't see anything, so not a backlight issue.
Inspected and re-seated the video connector once more, no cable injuries to report.
Was still having issues getting the display to power on.
So I booted into recovery, if I closed the screen at first power up and then reopened it at the recovery language window, the internal display would start working.
Lightbulb moment! Some sort of weird EFI + OS trigger was failing.
Digging deeper, I found that the hard drive was set up as an encrypted partition and I think that this was the primary source of the issue.
So now I am decrypting so that I can image the disk and re-install a clean unencrypted Yosemite.
Thanks for the tips!
Something to add to the troubleshooting kb, a messed up encrypted disk can affect/prevent the powerup of the screen.

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

Deleting photos in photo stream.....i,m always following the instructions on my pc to delete photos in the icloud, but there is coming always a message-there is problem with the server....this result i saw some few days!!

I want to delete photos in the icloud from my pc and i,m following and understand the instructiones from your system, but in every time i must read a message - there is a problem with the server connection.
What is the solution or when will be solved the problem?
Best regards
Tunk2412

Dear Carolyn,
thx xo much for your support, but the problem is not solved.
Thx so much to sent me the instruction comments for the customer support, but there is always coming a message......
"You cannot reset the photostream, because there is a problem with the server connection. Please try again later."
This message is coming since 4 days.
It will be very helpful, to get a message, when Apple will be solved the problem.
Thx so much.
Best regards
Tunk2412

Problems with backlight coming on

Similar Messages

Maybe you are looking for