Problem with video coming back from fullscreen: duplicated controls

Hi there!
I'm using the following code to go fullscreen with a video, the video controls are set to autohide.
The problem comes when I close the full screen mode (by button or simply with scape) to normal mode, flash places a new video control that stays over the video and if I place the mouse over the movie I can see the autohiden controls appearing under the new added one.
Any hints?
Thanks.
flvControl.autoPlay = false;
flvControl.autoRewind = true;
flvControl.scaleMode = VideoScaleMode.EXACT_FIT;
flvControl.source = flvSource;
flvControl.skinAutoHide = true;
flvControl.addEventListener(Event.COMPLETE, onComplete);
function goFullScreen():void
    if (stage.displayState == StageDisplayState.NORMAL)
           stage.displayState=StageDisplayState.FULL_SCREEN;
    else
           stage.displayState=StageDisplayState.NORMAL;
flvControl.fullScreenButton.addEventListener(MouseEvent.CLICK, _handleClick)
function _handleClick(event:MouseEvent):void
    goFullScreen();

@Andrew Rosewarn
Hmm, that much I'm aware of...
Is there anything that can theoretically exist in the displayList that doesn't necessarily take up an index?
When I check the index on my main application, there are only 2 items. [0] and [1], yet the [1] component is still being covered up by something...
I tried not hiding the [0] component (visible = true) and I can see it, but there is some kind of overlay over it that restricts me from clicking of the buttons on that component. And the overlay has a partial opacity, which is slightly transparent...
If there is no such possibilty, that would mean that overlay is actually my [1] component... but it is slightly transparent and missing all visual indicators that it IS indeed the [1] component..
This only happens when I come go to fullscreen then come back from fullscreen before the video completes and all those functions run.
The [1] component gets added upon the videoDisplay.COMPLETE event, that fact along with double checking the index confirms that the sharingBookmarks component is indeed on the top of my display stack..
Any clues or directions are greatly appreciated, thanks!
DK
p.s. I can provide more code or answers to any questions if anyone is interested in solving this puzzle.

Similar Messages

  • Problems with video play back on HP webcam HD 2300

    Hi,
    I just boaught and installed a new HP webcam HD 2300.  It works fine but when I play back a video I have recorded (of myself talking into the webcam), the video doesn't keep pace with my voice, so the 2 don't play at the same speed.  Any ideas as to how I can correct this please?
    Thanks

    HI Macrogend55.
    Thank you for your inquiry.
    I understand you are having an issue with your new web cam.
    I am sending you a link to a Microsoft document on "updating a driver for hardware that isn't working properly" click here.
    Here is a link to the "User Guide"click here
    Here is the link to the HP software and driver downloads click here.
    I hope this helps
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

    Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

    Hi there Clairemcaula,
    You may find the troubleshooting steps in the article below helpful.
    iCloud: Troubleshooting restoring an iCloud backup
    http://support.apple.com/kb/ts4036
    -Griff W. 

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • After upgrading to 10.6.6, major problems coming back from sleep mode

    I updated my macbook from 10.6.5 to 10.6.6 and now it is unresponsive frequently after coming back from sleep. The computer stops responding and I have the spinning beach ball on the screen forever. I couldn´t find any correlation with the programs I am running.
    I used Onyx to clear all caches, rebooted, etc but nothing seems to help...

    I have the same issue, I've found though that it seems to happen only if i goto sleep mode after logging out of my mid-2010 MBP. As long as I remain logged in and put the MBP to sleep it does not lock up with the spinning beach ball.
    This lock seems to happen just as I click on my name to login after waking my MBP from sleep.
    I have no peripherals, except maybe the power adapter, but it seems to happen regardless of if the power adapter is plugged in. I've done repair permissions in safe mode as well as disk scans.

  • I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • PROBLEms with videos imac G4 flat 17'

    PROBLEms with videos in imac G4 flat 17'

    It would help to know what videos you are having trouble with?   Are these from specific internet links? Are these playing back commercial DVDs? Are these videos produced by iMovie, Final Cut Pro, or iDVD of home video? Are these videos imported from an external Firewire or USB adapter such as Elgato's devices. You give us little to go on.   Please give us more details what is going on?

  • N80 new problem with video playback

    I have encountered a problem I didn't expect, when playing videos my N80 sometimes re boots itself part way through the video, this happens particularly with video podcasts downloaded from the BBC, any thoughts?
    Btw, it doesn't always happen at the same point in the video and most times after re booting the same video will play without fault, strange.

    Hi jacobsladder, I have an Orange branded phone - with all the Orange software on it, all I did was to delete the operator settings from the phone andchange a few settings to suit myself, btw, if you delete the Orange operator settings your phone will never revert back to the Orange defaults like always on packet data etc. I was advised some time ago by Orange that if I ran my phone in gsm mode only it would be more reliable and the battery would last longer, however since firmware upgrade I'm running in dual mode without any problems, the phone is far easier to live with now - or am I just used to its quirks?
    On the subject of memory cards I am aware that some brands don't work too wel but remember also that not all mini sd cards are created equal and not all manufacturers have the same sort of quality control, best to go for a genuine reputable brand - which personal experience tells me they are. Video now seems to be fine, cheers.Message Edited by bigguy on 09-Aug-2006
    10:53 AM

  • Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    - Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Motorola SB5101E - problem with video chat

    Hi. I have cable modem Motorola SB5101E and connect to net be cable TV .
    All is normal , functional, audio, text, etc. but I have problem with video chat be iChat. (3,1) According info from Motorola support is this cable modem without firewall and without any ports, cable TV provider was inform me, so in his server is none block none ports for me, therefore I have maybe any problem in me computer. But Where ? Can you help me anyone ? Thank you in advance and have a nice day.

    Hi Jirka:
    Do you have your firewall active on your mac? (System preferences>Sharing>Firewall) If the firewall is on, you need to open some ports.
    Report back and give us more details on your set up to troubleshoot your issue.

  • Satellite P850-30W - Fan does not run after coming back from sleep mode

    I got a Toshiba Satellite P850-30W with bios 1.90.
    Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
    This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
    Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
    I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
    ...this error could potentinally damage the laptop...
    to get the fan running again I have to restart windows
    anyone else experienced this?
    I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

    What kind of answer do you expect here in user community?
    Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
    In other Forum you can read about Satellite notebook; but is it exacts the same model?
    No, it seems to be an L650 series. Its completely different series .
    From my opinion its not software related problem.
    BIOS issue?
    Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
    It could be a hardware related issue. Memory? Maybe
    In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

  • Green pixels on external monitor with MBA coming up from sleep?

    Has anyone else experienced green pixels on external monitor with MBA coming up from sleep? I can get rid of these pixels either restarting MBA or switch off the monitor for a five secs and then switch it back on. These pixels do not show up within screenshots.. or neither on MBA own screen but they do reappear on external monitor (used with mini DP-DVI-adapter) after every sleep cycle.
    http://ssh.nbl.fi/~nbl4264/gp/ (few pics where these green pixels appear on)

    I have the same issue with my new macbook.
    When i wake the computer from a partial sleep the screen flickers and i get line distortion through the image.
    If i put the machine to sleep unplug the mini dvi adapter and replug it in and wake the computer up the problem disappears.
    The issue is also intermittent doing about 3 times out of every 10 wake ups...
    If anyone has any suggestions it would be great, I a using a new Dell 2208WFP monitor.

  • Problem with pdf display downloaded from application server

    Hi all,
    I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
    I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
    Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
    However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
    I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
    I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
    Regards,
    Sasi
    Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

    used a program to read the file from appl server and then downloading it to desktop.

  • Problem with Video capture Device

    i have a problem with FME. i am using Avermedia TV capture
    device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
    the FME interface the warning given for " Problem with Video
    Capture Device".
    i read all the topics in Flash Media Encoder Category, if
    this problem occures my capture device ( i expect MPEG ) how to
    solve this problem?
    Thanks,

    The Device Matrix is something we'll be updating in the
    future as we continue to test more and more equipement. Ideally, I
    would like for users such as yourselves to be able to add to it and
    tell us what has worked for you as well. If anyone has any ideas
    about what technology we should use to do this (e.g., this forum? a
    wiki?) please let me know.
    Regarding the devices not working - the main problem we see
    is that the system requirements are not being met. Here is what to
    check for:
    - are you running on Windows XP (only supported OS right
    now)?
    - do you have DirectX client runtime version 9c or higher
    installed?
    - do you have hardware acceleration enabled?
    - do you have 32bit graphics enabled?
    - do you have the latest direct show drivers from the
    card/device manufacturer?
    Thanks,
    Chris Hock
    Adobe Systems Inc.

  • FMLE 3.0.0.4743 Problem with video capture device

    log:
    Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
    Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
    Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
    Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
    Flash Media Encoder 2.5 working without any errors

    The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
    Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Maybe you are looking for

  • Purchase order and Inbound delivery

    Hi gurus, Im trying to create an inbound delivery with reference to purchase order. In the configuration i've created a new delivery type similar to EL and said Yes to all the copy controls that system asks. When im creating the inbound delivery with

  • How to handle errors in a file at sender side?

    Hi I have done a file to proxy scenario. I know how to handle errors on proxy. But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record.. I wanted to process the records

  • Issue related to Down payment

    Dear all I'm facing a issue in vendor down payments, (a)when we are giving any advances to employee vendor we are maintaining these advances in Special G/L account For that we create a alternative reconciliation also (b)but while  maintaining vendor

  • For Vendor Return 57F4

    Hello We have got some material form Sub-Contracting, which was gone through 57 F4, But material got reject by QA 105, Now we need to send the material to vendor through 57 F4 What are the steps to be followed Regards Niti Narayan

  • HT201317 i lost my ipad and i want to retrieve my photos in icloud, how do i do this?

    sorry it was stolen not lost...