Problems with Compiled files when Adobe Jetforms are used
Hi,
I am taking outputs of Customer Facing Documents from SAP R/3 using Jetform Output Designer Version 5.4.0.130.
The printer I am using is HP LaserJet 5100 Series. From the information I gathered this uses PCL 6. Therefore I compiled the file with the presentment target HP Laserjet 5000/5000N(PCL6)-[hp5000x]. When I use the PDF viewer as the default it gives me perfect alignment of the various fields. However when I take a printout everything is disturbed.
Can you please suggest, what is the best approach to take.
Thanks in advance.
Regards,
Paul
There is a difference in resolution between PDF print and PCL print. E.g. PDF is default 1000 dpi, which is fine for screen view, yet most printers are 300 dpi or 600 dpi.
If you make a copy of the PDF.ICS to apv_PDF.ICS. You can change the resolution by opening the file with a text editor like Notepad. Set the value to match your printer. Choose your custom PDF printer driver in Output Designer and recompile the form.
You'll find it in the \Config directory where your designer is installed. ..\JetForm\Output Designer\Config
Similar Messages
-
Problem with Thunderbird email:
When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
Bob GreenmanAre you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.
-
Problem with CSS files when placed in multiple locations.
Hi,
In our application we have a folder structure for the code files. Folder structure looks something like the one shown below:
ABC
---Scripts
---Stylesheets
DEF
Scripts
Stylesheets
Common
---Scripts
---Stylesheets
The problem is, if we create a CSS file and place it in its module specific folder (Eg: ABC) to which it belongs to and call the CSS on a page, then the styles are not getting applied to the page. But if we move the stylesheet to the Common folder, then page renders properly. In common folder, we already have a common CSS which is used across the project.
Facing similar problem with module specific and common js files.
We have to move all the module specific files to the module folders and all the common files to be placed in the Common folder.
MII Version: 11.5
Please help!
Regards,
Rajesh.Rajesh,
Also note that, If your html is referencing to multiple css files then the last referenced CSS file style classes will override all the style class having same names in the previous css files.
for example,
say CSS1 has
.bodycolor
background-color:yellow;
.button
color:red;
h1
font-size:50pt;
and CSS2 has
.bodycolor
background-color:red;
.button
color:yellow;
And your HTML is,
<html>
<head>
<link rel="stylesheet" type="text/css" href="css1.css"/>
<link rel="stylesheet" type="text/css" href="css2.css"/>
<title>CSS Test</title>
</head>
<body class="bodycolor">
<h1>Hello World</h1>
<input type="button" class="button" name="B1" id="B1" value=" Click " size="50">
</body>
</html>
In this case the classes "bodycolor" and "button" will be overridden by css2 file but h1 will be taken from css1
Hope this helps!!
Regards,
Adarsh -
Problems with MSG2 HD when multiple games are on
This is the second time I've noticed a problem with MSG2 in HD when 3 or more games are on MSG and MSG+. Basically channel 578 (MSG) will work fine and 580 (MSG +) will work fine, but 579 (MSG 2) disappears. The standard 79 channel works but 579 doesn't show up in the channel guide and entering 579 on the remote takes you to 578 instead. When you go to 79 it tells you that an HD version is available by clicking C on the remote; unfortunately that takes you to 578 as well. Please look into this problem. MSG 2 HD works fine except when a third game is airing on MSG plus that night. Since the New York Rangers are often on MSG 2 I imagine this is ticking off a lot of other people as well.
Lightgrw wrote:
This is the second time I've noticed a problem with MSG2 in HD when 3 or more games are on MSG and MSG+. Basically channel 578 (MSG) will work fine and 580 (MSG +) will work fine, but 579 (MSG 2) disappears. The standard 79 channel works but 579 doesn't show up in the channel guide and entering 579 on the remote takes you to 578 instead. When you go to 79 it tells you that an HD version is available by clicking C on the remote; unfortunately that takes you to 578 as well. Please look into this problem. MSG 2 HD works fine except when a third game is airing on MSG plus that night. Since the New York Rangers are often on MSG 2 I imagine this is ticking off a lot of other people as well.
MSG 2 HD has not been added to the Verizon FiOS lineup yet. Verizon has said they hope to add it to the lineup sometime this year. -
Problem with Reader file when we try to save a pdf version of filled in file.
We currently create fillable forms in Acrobat XI and enable them for fill-in with Acrobat Reader. Our end users are able to key information and save it to the enabled pdf file with Reader, but they want to create a protected version of the form so nothing can be modified once they have approved it. They have been creating "locked" pdf versions of the completed form using CutePdf software. The PDF files they are creating open fine with Acrobat Pro XI or our free FoxIT reader, but when we try to open the files they created with CutePDF with Acrobat Reader, they are quite distorted. According to users, this worked with older versions of Acrobat Reader. Please let us know if you have any suggestions (other than switching from Acrobat Reader to the free FoxIT reader.
Thanks for the help!!
Ken K. - 2191Can't endorse FoxIt or CutePDF, since I don't use either of them, and Adobe doesn't like us endorsing thrid party products in their forums anyway. On top of that I know several people who had really bad adware experiences with FoxIt, so I'd say stay away from it.
Most likely neither of these software developers has updated THIER software to work with Acrobat/Reader XI and the problem lies with them, since PDF is an Adobe format and they must follow the lead from here, not vice-versa. -
Problems with .png files when printing
Hi,
When sending my InDesign document to print (from exported pdf's)
some of my .png files are showing up with semi transparent boxes
of a different shade than the surround. This reflects the size of the files.
On screen these discrepancies are not apparrent.
Where does this problem lie? In the way I have made the .png's?
Or a setting in InDesign?
Or with the printer?
Any suggestions welcome,
Thanks
NikInDesignSecrets » Blog Archive » Eliminating YDB (Yucky Discolored Box) Syndrome
And .png isn't really a print format... -
Problem with FC security when data restrictions are based on RU dimention
Dear Sirs,
The data access restrictions for users in our system is configured, that reporting unitu2019s data can be accessed only by users that are responsible for ancestor's data based on RU hierarchy (restriction by RU dimension in data analysis).
When reporting unit is moved in hierarchy from one parent to another - old ancestor canu2019t access itu2019s data as only new ancestor do. But in that case we have a very big problem as users can't build old ancestoru2019s consolidated reports for previous periods - they are incorrect since RU dimension access is restricted for all periods.
Are any ideas how the issue can be solved ?Dear Egle,
Indeed, the historical data within the reports will not be accessible after the data analysis modifications and this is the normal behavior of BO Financial Consolidation.
Please note that an enhancement request was escalated to allow users to belong to more than one Data Access Group. This enhancement is referenced under the reference ADAPT01028492 ( for more information, you can refer to the SAP Note 1405946 - BOFC - Allowing multiple Data Access Groups).
This new feature is not implemented yet in Financial Consolidation and the current workaround is to create 2, 3 or 4 users for the same person.
However, this workaround will oblige users to disconnect/reconnect many times or open more than one session to apply necessary changes on BO Financial Consolidation.
If this request is quite important for you, we recommend you to enter this enhancement in our new site ( Idea Place): https://ideas.sap.com. Indeed, SAP has defined a new process and a new tool that is now available to customers which allow them to log Enhancement Requests themselves and have the ability to work more directly with our technology and Development group.
If the request sent by the customer is pertinent and voted by 10 other customers at minimum, the Enhancement Request will be probably accepted by the Product Group(to have more information about this new process, you can refer to the SAP note 1515837 - NEW Enhancement Request Process - "Idea Place" )
Let me know if you will need further details.
Best regards,
Emna. -
followed support steps (sudo) to recover itunes sync authorization "permission error" but did not work
i tried both steps but did not help: "disk utility" first aid and iTunes: Missing folder or incorrect permissions may prevent authorization.
-
Adobe Send - Problem with uploading files. When is this going to get fixed?
When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod -
Problem with some files with Adobe Audition 3.0
Hello everybody, I have a problem with some files. For example, when I open a .mp3 file, it says "The selected file it's not a supported file type". Instead, with other .mp3 files all works fine. What should I do? Thanks for the attention.
I strongly suggest - in fact this is probably the only thing you can do at this point - that you have a look at the FAQ here, and do exactly what it says.
-
Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem
hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.
-
Problems with our copy of Adobe Acrobat 7 Professional.
We have two problems with our copy of Adobe Acrobat proffesional which we have recently re installed back on the same PC following so we thought the relevant transfer activation instructions.
The first is that when we first start the program with no file loaded Both Transfer Activation and Activate Acrobat are greyout out. This in tiself is not a problem but it may have a bearing on our real problem.
We have for a few years used Acrobat Proffesional successfully to sign released drawing files which have been 'printed' to a PDF file by a third party printer driver. Recently though when we try to load any of this type of file the Acrobat menu stays greyed out and both Adobe Acrobat and the PDF file are listed in Windows task manager. Acrobat is completely locked up and has to be exited via task manager. If I load PDF files from other sources the abot symptoms accur only briefly then the program menus re activate and the PDF file disappears from task manager. It is as thought our PDF drawing files are failing to complete loading.
Does anyone know how I can find out if our copy of Adobe Acrobat Pro 7.0 is actually activated?
Does anyone know what might have started to prevent out drawing files from loading.
Thanks
ChrisGood point but this one does require activation.
Our real issue is that if we load one of our own drawing filkes, even one previously edited or signed with no problems it now completely locks up Adobe acrobat and we cannot do anything at all in Acrobat. -
Problems with .ARW files and auto toning
problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the helpsorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place. -
What is the exact problem with this file?
Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks -
Problems with color matching when printing...
Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your timeI've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.
Maybe you are looking for
-
Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message. Problem started when I used Tech Tool Pro 6 to "de-fra
-
I only have a small number of photos that add up to less than 30mb, but my storage in ipad states 2.4gb of photo memory, I have ran a number of cache cleaners and photo checkers but I cannot clear this excess memory. When I try to sync it says to the
-
Hello All, I have a requirement where i need to send the PO reminder smartform output to the user as Fax. Same is sent using the Program SAPFM06P using the form routine ENTRY_MAHN, which uses 2 FM's, but for SAP Scripts. Can anybody guide me over sam
-
Do I need to synchronize my stubs?
I have a client application that gets an RMI stub for an object in my server application. I am adding a shutdown hook to the client application, and I want to use the RMI stub in the shutdown thread. I'm concerned that my main thread may be in the mi
-
ADOBE FLASH ******* ME OFF NEED HELP
i have a new macbook pro 17 and this has happend twice .all the sudden when i try to watch a flash video file on line or on the computer in full screen it lags and works perfect in normal screen.But when i go to setting when u right click and uncheck