Problems with converting date in one calendar into another.
I am trying to convert, say, today's date into a Hebrew or Japanese calendar and put it into a form so it can be printed. I can convert date components but I can't get it so that I can use it with NSDateFormatter to print the date - it comes out as a Gregorian date even though printed from an NSDate object derived from a Hebrew calendar object.
Is there any sample code I can look at?
I have a compaq 3900 which I sync with ical. I use PocketmacPro.
It is the smoothest sync give it a try.
Isync all my callendars, contacts, transfer word and excell docs.
There tech support is good to
Similar Messages
-
ABAP Function Module Example to move data from one Cube into Another
Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PMThis is the start routine to duplicate records in two currencies.
DATA: datew TYPE /bi0/oidateto,
datew2 TYPE rsgeneral-chavl,
fweek TYPE rsgeneral-chavl,
prodhier TYPE /bi0/oiprod_hier,
market TYPE /bic/oima_seg,
segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
move-corresponding s_data_pack to DATA_PACKAGE.
if DATA_PACKAGE-loc_currcy = 'EUR'.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
DATA_PACKAGE-CURRENCY = 'EUR'.
APPEND DATA_PACKAGE.
else.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency. -
Inserting data from one table into another table using PL/SQL
HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
BEGIN
INSERT INTO riverside2
(charac_id)
VALUES
(x);
INSERT INTO riverside2
(charac_id)
VALUES
(y);
END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
BEGIN
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id = x);
END zorgs_gorfs;
/can someone kindly sort me outmodify this sql
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id = x);as
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick. -
Problem with converting data types
Hi Experts,
I am stuck up with a little problem, i need your help
i am converting all the data types to CHAR but i am not getting the expected data out.........
My code is as below...where do i go wrong...
LOOP AT <T_ITAB> ASSIGNING <FIELD>.
DO.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE <FIELD> TO <RECORD>.
IF SY-SUBRC = 0.
LV_FIELD = <RECORD>.
N = STRLEN( LV_FIELD ).
IF N = '8'.
IF LV_FIELD IS NOT INITIAL.
LV_DATE = LV_FIELD.
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = LV_DATE
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC EQ 0.
CONCATENATE LV_FIELD+6(2) LV_FIELD+4(2) LV_FIELD+0(4) INTO LV_FIELD SEPARATED BY '.'.
ENDIF.
ENDIF.
ENDIF.
IF LV_RECORD IS INITIAL.
LV_RECORD = LV_FIELD.
ELSE.
CONCATENATE LV_RECORD LV_FIELD INTO LV_RECORD SEPARATED BY ' * '.
ENDIF.
ELSE.
EXIT." DO
ENDIF.
ENDDO.
APPEND LV_RECORD TO LT_OUTPUT.
CLEAR LV_RECORD.
ENDLOOP.
THE TABLE LT_OUTPUT LIKE THENV(CHAR 255)
My output looks some thing like this:
04 36876 15.09.2011 39600 1999
06 36960 15.09.2011 39600 2632
07 36874 15.09.2011 39541 9232
My expected output
04 36.876 15.09.2011 39.600 1.999
06 36.960 15.09.2011 39.600 2.632
07 36.874 15.09.2011 39.541 9.232
Regards
samAt run time you can see all the data........ like what i have shown...
but if you clearly see, DATE will be in the internal format..but if you print it, it will be in dd:mm:yyyy
can you suggest me if i have a dynamic field symbol (table data) ,,,, How can i convert data types dynamically..
if it is a static internal table i am achieving with WRITE TO statement.....but i have huge data in field symbols...
Instead of all these , please specify the exact problem your are facing . What is it with date field ? . In SAP while printing the internal format will be converted to external. What is your requirement with this date field?
My output looks some thing like this:
04 36876 15.09.2011 39600 1999
06 36960 15.09.2011 39600 2632
07 36874 15.09.2011 39541 9232
My expected output
04 36.876 15.09.2011 39.600 1.999
06 36.960 15.09.2011 39.600 2.632
07 36.874 15.09.2011 39.541 9.232
I dont see any problems mentioned in your date field. Both your actual and expected outputs reflects the same in date field.
In SCN you will only get solutions if your question is precise.
Kesav -
Convert data from one table to another
SQL> select * from A;
empid | mon_tips | tues_tips | wed_tips | thu_tips | fri_tips
----------------- ------------ --------- ----------+----------
1 | 10 | 20 | 30 | 20 | 10
2 | 10 | 20 | 30 | 40 | 50
i want a SQL query that will convert the data from table A into table B with the following format:
B(empid, Day, tips) where the column Day can take the values (Mon, Tue, Wed, Thu, Fri).
Thanks in adavnce for the replies
sqllearnercreaate table B as (select empid, 'MONDAY' day_1, mon_tips tips from a
union
select empid, 'TUESDAY' day_1, tues_tips tips from a
union
select empid, 'WEDNESDAY' day_1, wed_tips tips from a
union
select empid, 'THURSDAY' day_1, thu_tips tips from a
union
select empid, 'FRIDAY' day_1, fri_tips tips from a)Cheers
Sarma. -
How to load data from one Infobject into another in the same system??
Hello All,
i need to load hierarchy data (already existing in 1 Infobject) into another newly created Infobject in the same BW system.Is there a way to do it without involving flat files??
Thanks soo much in advance
Regards,
Priyahi
say there are two infoobjects X and Y.
X is existing infoobject and Y in new one.
go to infosurce-search for X-create export datasource - map the rules and load the data.
This is one way.
Other way is u can use X as a reference object of Y so that both of them have same structure and both objects will share common database tables in BW which are exsting for X.
Hope this helps.
Kindly assign the points if it helps. -
Loading Data from one Cube into another Cube
Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advanceThis is the start routine to duplicate records in two currencies.
DATA: datew TYPE /bi0/oidateto,
datew2 TYPE rsgeneral-chavl,
fweek TYPE rsgeneral-chavl,
prodhier TYPE /bi0/oiprod_hier,
market TYPE /bic/oima_seg,
segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
move-corresponding s_data_pack to DATA_PACKAGE.
if DATA_PACKAGE-loc_currcy = 'EUR'.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
DATA_PACKAGE-CURRENCY = 'EUR'.
APPEND DATA_PACKAGE.
else.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency. -
Facing Problem with passing Values from One report to another
Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help.sorry for the late updation.
My First Report, Summary level is a Pivot Table.
I tried the same report with Table option, the value is passing correctly.
Is there a way to get rid of this situation using Pivot table.
Thanks for your help.
below is the original request.
Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help. -
Problem in Extracting Data for one cube to another
Hi,
This problem exists in Quality Environment of 3.x version.We have two financial cube.
Cube A1 - Sourced through R/3 system (delta update) and Cube B1- Sourced through A1 cube.(Full update). These two cubes are connected through update rules with one to one mapping without any routines.
Basis did a copy of back-end R/3 system from Production to Quality server.This happened approximately 2 months back.
The Cube A1 which extracts delta load from R/3 is loading fine. but for the second cube, (fextraction from previous cube A1) i am not getting full volume of data instead i m getting meagre value but the loading shows successful status in the monitor.
I tried through giving conditions in my infopackage (as it was given in previous year's loading) but then also its fetching the same meagre volume of data.
Any lights on this will be more appreciable...
SwamiHi Swami
As you said below issues is in QA system, please check with below and revert back to me if this doesnt solve your problem
Please check update rules of InfoCube B1 for all key figures and characteristics, you may find certain objects with "NO UPDATE", (this happens sometimes while copying production system to any other system), if you find any object with"NO UPDATE" then compare this object mapping with Production system update rules, if its not sync then change update mode accordingly
Please check number of characteristics and key figures existing at InfoCube B1(production) and compare with InfoCube B1 (QA), if this doesn't match then check for missing object and add to InfoCube B1
Hope this will solve your issues!
-DU -
To convert database in one language into another
Hey Friends
My name is neeraj bansal. I have a MySQL database in dutch language. but i want that database in english language. i have the backup files.
i have searched on google but of no use
does MySQL provide any facility to convert it
or any other tool
Please help me
because i can't convert manually all the database
please if any body have any idea, mail me on [email protected]
Reply Soon
With Regards
Neeraj Bansal
[email protected]Yes, you could be right but mostly links.. like these
http://dev.mysql.com/doc/refman/5.5/en/internationalization-localization.html
http://www.wowebmaster.com/mysql/mysql-character-set-change/
Try these two links and make sure the characterset file exist before you try alter database.
Do not forget reading the consequence of changing language for a database as it might cause data loss. -
Problem in loading data from one DSO to another
Hi All,
I am using Multicube 0PM_MP03, this mutli cube use DSO 0PM_DS02 & 0PM_DS01, data will flow from PSA to 0PM_DS01 & then to 0PM_DS02 using a Update rule, i have triggered my infopackage & i can see data in 0PM_DS01 & i have activated the data in 0PM_DS01, now on right click on 0PM_DS01 i click on the option Additional Functions -> Update 3.x Data to Target, now the request status is green in 0PM_DS02 but i cannot see any data in this DSO, neither in new or active, can anyone help me out in this where i am doing wrong.
Thanks,
Pritam.Hi Pritam,
This is strange, Check the below points.
1. If the number of records added 0, in manage of DSO2?
2. Confirm if there is a transfprmation between ODS1 & ODS2. If there is, you need to use a DTP (not Additional Functions -> Update 3.x Data to Target).
3. Activate the request and then check.
4. Maintain PSA for the datasource 80PM_DS01 and when loading data from DSO1 to DSO2 choose option PSA and then into targets.
Regards,
Panksj. -
How do I share data from one spreadsheet into another spreadsheet that is a separate file?
I am trying to create a spreadsheet that will pull data from another spreadsheet in a different file for a what if scenario. Is there a way I can reference a cell from that file besides adding a separate tab in the original file?
For Numbers '09 (Mac), the answer is no, Numbers does not support references to a cell in a separate file.
But the profile information at the bottom of your message, and the use of 'tab' in the message suggests you are using Numbers for iOS. I've requested your question be transferred to the iWork for iOS community, where the users of that version tend to be more plentiful than here, where the topic is Numbers (for Mac).
Regards,
Barry -
Passing data from one frame to another frame
hello all, i am having a problem with passing data from one frame from another. I have a main frame when you click on connect button it display the second frame(class) that has 2 text fields and 2 buttons. When i click on connect it check if the data is correct. If the data is correct i want that frame to close and pass the data back to main frame. How can i do that.
thank youhello all, i am having a problem with passing data
from one frame from another. I have a main frame when
you click on connect button it display the second
frame(class) that has 2 text fields and 2 buttons.
When i click on connect it check if the data is
correct. If the data is correct i want that frame to
close and pass the data back to main frame. How can
i do that.
thank you
the original problem sounded like an ideal opportunity to use Modal Dialog. if you want one frame to display another to get user input then you need to stop the method in the main frame from executing until you recieve a valid input.
you can use your own class and keep all of the components that you have in the connect frame but you would have to extend JDialog instead of JFrame.
there is a way around it!
if you must use JFrame for both, then you need to have access to the main frame in the connect frame, maybe pass the pointer to the constructor??
anyway, when the connect frame is done with its duties, you have to use the pointer to call another method in the main frame that will continue the process. otherwise main frame doesn't know when connect frame is done and by that time, the method in main frame that instantiated the connect frame has long since died.
also, it allows things to happen in the other window that you may not want to happen until the connect frame is done
typically users of software start clicking around on things and you could have three or four connect frames going at the same time
it's really best to use a Modal Dialog, it really can look just like a JFrame!!!!!!!!!!!!!! -
Hi Experts,
i am new to the SRM, i am facing problem in passing data from one screen to another.
my requirement is that when we select one shopping cart and press the PROPOSE SOURCES OF SUPPLY button, we will fetch all the contracts that are attached to the shopping cart.
we have implemented a BADI implementation of BBP_SOS_BADI (method BBP_SOS_CHECK) for passing some changed values to the contracts of the shopping cart into the popup screen that is displayed when we press PROPOSE SOURCES OF SUPPLY button and when we select any contract and press ASSIGN ONLY button in the popup screen the badi BBP_DOC_CHANGE_BADI is triggered.
i have implemented another BADI implementation of BBP_DOC_CHANGE_BADI for fetching the selected contract and pass the values to another screen, but the problem is that when we select one contract and press the assign only button we are fetching the wrong contract number ( that is in the BADI method BB_SC_CHANGE parameter IT_ITEM we are fetching the wrong contract), if we again do the same procedure for the second time we are getting the correct contract.
i am unable to understand why we are getting the wrong contract in the first time( that is we are getting contract other than the selected one).
as per my understanding i think when we are passing data to the popup screen using BBP_DOC_CHANGE_BADI we are not updating the shopping cart with the changed data.
can anyone tell me how we can update the SHOPPING CART with the changed contracts data, i have used BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and other shopping cart FM but nothing is happening.
Thanks
TanveerHello,
What version of SRM are you on? Have you check for OSS Notes? I have had trouble with BBP_DOC_CHANGE_BADI but it was because of other issues. The BADI works pretty well and it is called almost every time something happens to the shopping cart.
I have noticed that sometimes that values are not changed til the second calling of the BADI. I have yet understand why but I think it has to do with prompt processing. Usually, we train our requisitioners to click the 'Check' button to flush things out.
I don't know if I was helpful.... another thought.... could there be an error caught by BBP_DOC_CHECK_BADI that is preventing change in BBP_DOC_CHANGE_BADI?
Regards, Dean. -
Transfer items from one calendar to another (on iMac)
I have a question: how can you transfer all the items from one calendar into another calendar? I thought I had come up with an ingenious solution, but it didn't work (see below).
Years ago, I set up a calendar for my wife and I to use as a "family" calendar. After uploading iOS8, I decided to try transfer all the calendar items from our "family" calendar to the newly created Family calendar. I used the Export command to export all the items in the "family" calendar, and then the Import command to bring them into the Family calendar. BAD IDEA. I got a dialog box telling me the items could not be imported because they were already on the iCloud calendar. This dialog box had to be dismissed by choosing either "Ignore", "Try Again", or "Revert to Server". This dialog box popped up FOR EVERY CALENDAR ITEM. At first I thought I was in an endless loop. I finally put a stapler on my keyboard to hold down the Return key to dismiss the dialog boxes. Even then, it took several minutes to clear the dialog boxes. Apparently, I learned how NOT to transfer items from one calendar to another.Okay. I have answered my question. The key is to actually read and follow Apple's instructions (i.e. delete the original calendar AFTER exporting it, but BEFORE importing it into the new calendar.)
Maybe you are looking for
-
Windows no longer detecting my Audigy 4?(Non-P
Hey all. I've had my Audigy 4 (non-Pro) installed and working super for about 50 days, but it started giving me a weird problem. Windows was no longer detecting the card! It was weird. DX Diag, programs like EVEREST... they all report no sound card w
-
Error in HRPAD31 ( Short dump Analysis )
Hi friends, When i am changing the existing qualification or adding new qualification it is showing this error in short dump Pls advise me if there is some relationship i am missing in 031 ? here is the description of short dump Runtime Error DBIF_R
-
Font drop down menu won't stay open in Photoshop Elements 8
I have Photoshop Elements 8. Up until today it worked just fine. I have been trying to change the font type using the drop down menu of course. Every time I click on the drop down menu it tries to open, but will not stay open to make the change. The
-
Render glitch in AE (and FCP7)
Every so often I will get glitched frames in AE, and also in FCP7 . The glitch happens when a clip is rendered. Most often, a diagonal line appears in a frame. Sometimes there are other issues, such as artifacting. The glitches never appear for more
-
Hey Guys, I was just wondering if there was any way to get songs that are on your iPod (but not on your computer) on toyour computer. I was over my friends house the other day and he gave me some cool songs and now I was hoping I could get them on to