Problems with cost distribution "by value"

Hi All,
We have the following problem in cost assignment in shopping cart: We can choose different cost distributions: 1. by percentage; 2. by quantity; 3. by value. When choosing 3 - "by value" and distributing values to different WBS-elements with budget check, system comes up with several error messages saying budget overspend, also we exactly fill in the open budget on theese WBS-elements. The main reason for this seam that our backend system R/3 4.70 just knows the two posibilities 1. - by percentage; 2. by quantity.
Do you guys know a possibility in customizing or elsewhere to deactivare the possibility 3 - by value, since I think back end can not work with this kind of distribution.
Best Regards Thomas

Hi
Do you want to remove the drop down by value in the shoping cart screen ?
BADI - BBP_UI_CONTROL_BADI - method BBP_SC_UI_CTRL field control You may try here
regards
Muthu

Similar Messages

Multiple Account assignment with cost distribution value error

Hello Experts,
We are facing the below issue,
We are trying to create Limit SC with MAA cost center with cost distribution "By Value". we distribute the total value to 5 cost centers. when we try to order the SC, system is not allowing us to order, we got the error message "Multiple account assignment only with percentage less than 100%".
Please advise how to resolve this issue.
Regards,
Santhosh Kumar.G

Hi
Check this OSS notes : 1644804
Regards
G.Ganesh Kumar

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4. However, I don't want it to show datatips for
data points with zero values. Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem. Of particular concern is the July bar. Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ? Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system. JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

Problem with inheritance and outputting values in toString.

Hey guys, i'm having a major problem with inheritances.
What i'm trying to do with my program is to create objects in my demo class. Values are passed to several other objects that each do their own calculations of grades and results and then outputs the result in my toString. I followed step by step the instructions in my book on how to setup the inheritance and such. I can only output everything that was created in my superclass, any other thing that was created in an object that belongs to a subclass does not display in the output at all.
Even if I change or create new instance variables, I can't figure out for the life of myself how to output the other values.
Because there's so much code to be splitting on the forums, I zipped my whole project in a RAR. I'll link it here
http://www.4shared.com/file/ZleBitzP/Assign7.html
The file to run the program is CourseGradesDemo class, everything else is either a subclass or superclass to some part of the program. After you run CourseGradesDemo, you will see the output, and understand what displays and what stays at 0.0 value. If anyone can help me out with this it would be greatly appreciated
Thanks in advance.

Basshunter36 wrote:
Hey guys, i'm having a major problem with inheritances.
What i'm trying to do with my program is to create objects in my demo class. Values are passed to several other objects that each do their own calculations of grades and results and then outputs the result in my toString. I followed step by step the instructions in my book on how to setup the inheritance and such. I can only output everything that was created in my superclass, any other thing that was created in an object that belongs to a subclass does not display in the output at all.
Even if I change or create new instance variables, I can't figure out for the life of myself how to output the other values.No idea what you're talking about. Provide an [url http://sscce.org]SSCCE.
Because there's so much code to be splitting on the forums, I zipped my whole project in a RAR. I'll link it here
http://www.4shared.com/file/ZleBitzP/Assign7.html
Not gonna happen. Provide an [url http://sscce.org]SSCCE. And don't say you can't. You definitely can. You may have to spend an hour building a new program from scratch and getting it to reproduce the problem, but if you can't or won't do that, you'll find few people here willing to bother with it.

Problem with QofQ and Null Values

Just converted from CF5 to CF7. Finally figured out what was
causing the error message :
"The value "" cannot be converted to a number" when running a
QofQ. It happens whenever there is a NULL (and I think a ZERO)
value in the QofQ. I'm using the QofQ in a seperate chart program.
The main query merges data from a store and a region table.
I'm doing a LEFT OUTER JOIN to combine the REGION with the STORE,
AND so that stores with NO SALES for a given day will show up as
ZERO. On the main report, when I don't use a QofQWhen grouping by
DAY or MONTH, I can test the value in the CFOUTPUT for NULL or ZERO
and display "0" or "N/A" on the report.
But when I try to chart it, using a QofQ to read in the
values from the main query, and format the numbers, I get this
error message. I've tried using the CAST function, using FLOAT,
DOUBLE, BIGINT, etc., but still get same error message.
The only way I could fix this is to add a WHERE statement to
the QofQ, that only includes sales values greater than ZERO. But
then, I have gaps in my chart because stores with NO SALES for a
given day or MONTH don't appear. Because they are removed from the
query. The whole point of LEFT JOINS is to include items with no
values (or NULL) values.
Does anyone know if it's possible to keep these values in a
QofQ? So that items (e.g., store locations in my case) with NULL or
ZERO values for some or all days or months can be charted? Even
with a ZERO value? I've read everything I can get my hands on
regarding QofQ, the CAST function, etc., but nothing seems to work.
Thanks for any help. (FYI, didn't have this problem with CF5. It's
QofQ could handle NULL or ZERO values without providing an error).
Gary

Well, I tried the IsNull function on the 3 SUM() values I was
calculating in my SELECT statement (on a LEFT OUTER JOIN QUERY),
and I STILL got another "cannot convert "" to a number" but this
time the error message was more direct, and pointed me to a DATE
field in my query, where I was SORTING AND GROUPING either by DAY
or MONTH (depending on what user selected on form).
In my QofQ, I'm not just reformating the integer SUM()
values, but also the date values. So, I applied the IsNull()
function to the DATE values in my main query. I still kept getting
errors. But after experimenting ((SQL Server BOL docs doesn't give
ISNULL() examples for DATE FIELDS, only NUMBER fields), I tried
putting the dates in SINGLE QUOTES in my IsNull() function, the
QUERY RAN. Then I wasn't sure WHAT date to enter, e.g., 1/1/1889 or
1/1/2001, etc.
Then, I discovered, after experimenting, that you cannot just
blindly enter ANY date when using IsNull in a date field,
especially if you are using CFGRAPH to chart the results by day.
You have to select a date within the date range the user selected,
so this means using the FORM.DATE (or URL.DATE) value from the
form. Here's the working example from my SELECT main query:
SELECT SUM(ISNULL(d.ttldb,0)) AS SumOfDB,
SUM(ISNULL(d.ttldbv,0)) AS SumOfDBV,
SUM(ISNULL(d.ttldbi,0)) AS SumOfDBI,
<CFIF '#url.reptype#' IS "DAILY">
ISNULL(d.depday, '#url.date1#') AS depday
<CFELSE>
month(ISNULL(d.depday, '#url.date2#')) AS TranMonth,
year(ISNULL(d.depday, '#url.date2#')) AS TranYear
</CFIF>
Then I discovered that whatever date was used in the URL.DATE
field (in my case it would be one of the two date field from the
form, and depended on whether you coded DATE1 or DATE2, the chart
would always show ZERO values for that date. So I tried putting the
IsNull() date values in the GROUP BY and ORDER BY statements, e.g.,
<CFIF '#url.reptype#' IS "DAILY">
GROUP BY ISNULL(d.depday, '#url.date1#')
ORDER BY ISNULL(d.depday, '#url.date1#') DESC
<CFELSE>
GROUP BY year(ISNULL(d.depday, '#url.date2#')),
month(ISNULL(d.depday, '#url.date2#'))
ORDER BY year(ISNULL(d.depday, '#url.date2#')),
month(ISNULL(d.depday, '#url.date2#'))
</CFIF>
And this worked. The report ran just fine, and the chart
charted every value correctly.
I guess you have to learn all the little "quirks" about CF7
and how it's QofQ and chart programs work. But so far, so good.
Thank you all for your help. Now I've got to update other old
CF5 programs that are returning errors when there are null values
from my LEFT OUTER JOIN queries. Will take some time, but at least
I know how to do it. Thanks to your help.
I really appreciate your time and efforts to help with this
issue.
Gary

Problem with dashboard prompt initial value (OBIEE 11g)

Hi alli,
I have a problem with dashboard prompt and session variable in OBIEE 11g.
I have declared a session non-system variable which I set/change with dashboard prompt. At login the variable is initialized in initialization block that gets a value from an SQL select statement.
When I change the value in prompt, the session variable changes accordingly, as it should (change is made by calling function NQSSetSessionValue() within javascript function). While I am in my dashboard, cruising around pages the variable stays the same, and when I return to the page that has prompt on it, the correct value is shown. Everything works fine.
The problem occures when I go to Catalog (in presentation services) to create some new Answers. When I return back to the same page in dashboard (which has a prompt), the prompt selected value and session variable are set back to the default value. It looks like the initialization block is executed again.
My prompt is configured like this:
- Choice List Values: SQL Results
- Default selection: Variable Expression (@{biServer.variables['NQ_SESSION.VariableName']} )
- Set a variable: Presentation Variable
Is there a way to stop the initialization block from executing again? Isn't it logical that the initialization block executes only at login, when the session variable is empty? I don't need it to execute every time i come to the dashboard.
Thanks in advance,
Marko
Edited by: markor on 14.3.2011 8:58

How and where do you use the nqssetvalue() function.
I tried it in several places but it doesn't work.
Can you help me, please!
Thanks

Problem with reading an unusual value from a FP-RTD-124 module.

I need help troubleshooting a FP-RTD-124 module. The problem I am having is that when I monitor the channel in FieldPoint Explorer, I get what appears to be a random number for the value. The numbers range from around -40C to +50C. I would expect the value to be consistent since it should be room temperature. FP Explorer also indicates that the channel status is "Successful!" and the rest of the channels are "Open RTD".
I am convinced that the RTD is wired in correctly to Channel 0 of the FP module. I have pulled the RTD out and measured consistently (using a multimeter) the resistance at ~107.4 Ohms which is what I would expect at room temperature. I have also tried changing the RTD and using diff
erent channels but I am still receiving those random numbers for the value. In addition, I made sure the channel was configured with the same TCR value as the RTD.
--- Additional Information ---
The RTD is a 4 wire Minco 100 Ohm Platinum RTD with a TCR=0.00385. I am using FieldPoint Explorer 3.0.2 (build 177). The network module is a FP-1600 connected directly to a computer using a x-over ethernet cable. The terminal base for the FP-RTD-124 is a FP-TB-1.
Any help would be appreciated.
Ken

Ken,
The first thing to do is to make sure the FP-RTD-124 is working correctly. Take a fixed resistor (100-200 ohms) and wire it between +Sense and -Sense. Add one jumper wire from +Sense to +Excite and a second one between -Sense to Com. Set the channel to the 0-400 Ohm range in FieldPoint Explorer. If the resistance is a steady, accurate value then the FP-RTD-124 is fine and you need to double check the RTD itself. If the reading is jumping around on the FP-RTD-124, then there is either an outside source of influence (make sure there are no connections to the V & C terminals on the terminal base) or the FP-RTD-124 has been damaged. If the FP-RTD-124 is behaving correctly, then check the lead to lead resistance on your RTD. It may be that one of the wires is
partially open that you did not catch when measuring with the DMM (assuming you used a 2 wire DMM).
Regards,
Aaron

Problem with Function returned without value -

all i am having a problem w/ jdev passing the values. when hardcoded it works. when i remove to pass the 2 vals for doc_type and doc_num the params are being passed to the impl but the String sql = " BEGIN :5 := scotts_test_proc.get_log(:1, :2, :3, :4 ); END; "; is not sending the values to the pkg. to verify i am getting data i created a table to store the data being passed/retrieved by function. i am getting the log_pieces posted when hard coded so i know that works. but when i try to pass the doc_type and doc_num it errors w/ function returend without value . am i passing the params correctly from co to impl to func to get the return l0g_piece. thats for the help
calling package
spec
function Get_Log( -- rmode IN NUMBER , rmode IN STRING, doc_type IN VARCHAR2 DEFAULT 'TEL',
doc_id IN VARCHAR2 DEFAULT NULL , doc_num IN VARCHAR2 DEFAULT NULL
-- , p_out out varchar2
) -- IS --proc
RETURN varchar2 IS --function
body
l_doc_type := 'TEL';- remove this hardcoded
l_doc_type := doc_type ; --to pass the param
IF l_doc_type = 'TEL' THEN
-- l_log_pieces := Get_TEL(TRIM(3524204)); --change 3524204 to doc_num hardcoded presently
l_log_pieces := Get_TEL(TRIM(doc_num)); --to pass the param
-- (doc_num);
l_log_piece := l_log_pieces(1);
-- p_out := l_log_piece ;
insert into isitthere (doc_type, doc_num, isitthere) VALUES (doc_type, doc_num, l_log_piece); commit;
return l_log_piece; -- function -- return p_out; -- function p_out := l_log_piece ; proc
END IF; --if doc type is TEL
FROM CO
System.out.println("CO Passing paramDOC_TYPE for -------> " +docAbbr.getValue(pageContext) ); -- passing TEL
System.out.println("CO Passing paramDOC_NUM for -------> " + paramDOC_NUM ); -- passing 88
String getDocAbbrForHTML = docAbbr.getText(pageContext);
System.out.println("Passing CO getDocAbbrForHTML for -------> " + getDocAbbrForHTML ); -- passing TEL
Serializable paramDocLocatorParamList [] = {paramRMODE, getDocAbbrForHTML , paramDOC_ID, paramDOC_NUM , p_out };
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OADBTransaction dbtrans;
OAViewObject docLocator = (OAViewObject)am.findViewObject("DocLocatorVO1");
Serializable paramABC = "TELNET";
paramABC = am.invokeMethod("getHTMLString", paramDocLocatorParamList);
rtxt0.setValue(pageContext, "here it is 12354" + paramABC.toString() );
// docLocator.executeQuery();
// --------------- End getHTMLString ----------------- //
FROM AM IMPL
public String getHTMLString ( String paramRMODE, String getDocAbbrForHTML , String paramDOC_ID, String paramDOC_NUM, String p_out )
System.out.println("Entering The AM Impl");
System.out.println("Passing getDocAbbrForHTML in IMPL -------> " +getDocAbbrForHTML ); -- got TEL in param
System.out.println("Passing paramDOC_NUM in IMPL -------> " + paramDOC_NUM ); -- got 88 in param
CallableStatement st = null;
OADBTransaction txn = (OADBTransaction)getDBTransaction();
Connection conn = txn.getJdbcConnection();
String sql = " BEGIN :5 := scotts_test_proc.get_log(:1, :2, :3, :4 ); END; ";
CallableStatement cs = txn.createCallableStatement(sql,1);
String ErrorExist = "";
String getHTML = "";
try
cs.setString(1, paramRMODE); // cs.setInt(1, paramRMODE.intValue()); // cs.setInt(1,Integer.parseInt(paramRMODE));
cs.setString(2, getDocAbbrForHTML); //paramDOC_TYPE);
cs.setString(3, paramDOC_ID);
cs.setString(4, paramDOC_NUM);
// cs.setString(5,p_out); // --param
/* cs.registerOutParameter(1,Types.CHAR);
cs.registerOutParameter(2,Types.CHAR);
cs.registerOutParameter(3,Types.CHAR);
cs.registerOutParameter(4,Types.CHAR);*/
cs.registerOutParameter(5,Types.VARCHAR);
cs.execute();
getHTML = cs.getString(5 ) ;
p_out = getHTML;
//this string is to see my results. only......
String x ="abc 123";/*" TEL Document Action History (3524204 Nosulina, Yelena N COMPLETE) <table border=1 width=100% cellspacing=0 cellpadding=2 bordercolor=#EEEEDC> <tr bgcolor=#F7F7E7>"
+ " <td width=11% valign=top align=left>Action</td> <td width=17% valign=top align=left >Approver UserName</td> <td width=14% valign=top align=left >Date/Time </td> <td width=56% valign=top align=left >Notes</td> "
+" </tr>  <tr bgcolor=#FFFFFF> <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left > </td> <td width=14% valign=top align=left >Dec-20-2011 03:01:23 PM </td> <td width=56% valign=top align=left >DOCUMENT CREATED </td> </tr>  "
+ " <tr bgcolor=#FFFFFF> <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left >McCombs, Tracey L </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:10 PM </td> <td width=56% valign=top align=left >Requestor </td> </tr>  <tr bgcolor=#FFFFFF> "
+" <td width=11% valign=top align=left >WF STARTED </td> <td width=17% valign=top align=left >Workflow </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:21 PM </td> <td width=56% valign=top align=left >Workflow Started </td> </tr>  <tr bgcolor=#FFFFFF> "
+"<td width=11% valign=top align=left > </td> <td width=17% valign=top align=left >McCombs, Tracey L </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:21 PM </td> <td width=56% valign=top align=left >SUBMIT </td> </tr>  <tr bgcolor=#FFFFFF> "
+"<td width=11% valign=top align=left >NOTIFICATION SENT </td> <td width=17% valign=top align=left >Workflow </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:21 PM </td> <td width=56% valign=top align=left >Notification sent to User Approvals Level 1, Org ID: 455 311402400 Med - Infectious Diseases </td> "
+" </tr>  <tr bgcolor=#FFFFFF> <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left >Brownlow, Lana Jill </td> <td width=14% valign=top align=left >Jan-03-2012 08:49:48 AM </td> <td width=56% valign=top align=left >Approved : </td> </tr>  <tr bgcolor=#FFFFFF> "
+" <td width=11% valign=top align=left >USER APPROVED </td> <td width=17% valign=top align=left >Workflow </td> <td width=14% valign=top align=left >Jan-03-2012 08:49:48 AM </td> <td width=56% valign=top align=left >Completed all User Approvals </td> </tr>  <tr bgcolor=#FFFFFF> "
+ " <td width=11% valign=top align=left >CENTRAL APPROVED </td> <td width=17% valign=top align=left > </td> <td width=14% valign=top align=left >Jan-03-2012 08:49:48 AM </td> <td width=56% valign=top align=left >Completed Central Approval Process </td> </tr>  <tr bgcolor=#FFFFFF> "
+" <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left > </td> <td width=14% valign=top align=left >Jan-03-2012 02:17:07 PM </td> <td width=56% valign=top align=left >DOCUMENT REASON CHANGED TO COMPLETE. DATA LOADED IN BASE TABLES. </td> </tr> </table>";
getHTML = x;
System.out.println("getHTML 1234 is " + getHTML ); -- testing output to get returned
cs.close();
catch (SQLException sqle)
try { cs.close(); }
catch (Exception e) {}
throw OAException.wrapperException(sqle);
return getHTML;

when return is encountered your function terminates.

Problem with dg4msql and table-valued functions

Have configured dg4msql to connect from my oracle db to ms sql server.
Am able to do simple SELECTs from ms sql tables like:
select * from "sys"."procedures"@dg4msql;
or
select * from "dbo"."SomeTable"@dg4msql;
But am unable to do a SELECT from a table-valued function:
select * from "dbo"."GetData"@dg4msql('param1value');
or
select * from "dbo"."GetData"('param1value')@dg4msql;
In both cases I get:
ORA-00933: SQL command not properly ended
It does not like the parameters portion of the query ("('param1value')")
initdg4msql.ora:
HS_FDS_CONNECT_INFO=[svr1]//mydb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_PROC_IS_FUNCT=TRUE
HS_FDS_RESULTSET_SUPPORT=TRUE
Have tried the other set of params:
HS_FDS_PROC_IS_FUNCT=FALSE
HS_FDS_RESULTSET_SUPPORT=TRUE
Same story. After changing the init*** file have bounced both Listeners (DB and Gateway), reconnected, and re-run the query.
Have I missed something?
Any help is greatly appreciated!

Sorry, but for me it looks you did not get the problem.
Oracle® Database Gateway for SQL Server User's Guide,:
11g Release 2 (11.2)
Part Number E12069-02
*2 SQL Server Gateway Features and Restriction*
Result Sets and Stored Procedures
The Oracle Database Gateway for SQL Server provides support for stored procedures which return result sets.
By default, all stored procedures and functions do not return a result set to the user. To enable result sets, set the HS_FDS_RESULTSET_SUPPORT parameter value to TRUE.
PL/SQL Program Fetching from Result Sets in Sequential Mode
-- Execute procedure
out_arg := null;
refcurproc@MSQL('Hello World', out_arg, rc1);
Somewhere in this forum I've seen a message that the syntax "SELECT ... FROM sp@db(param1, param2)" works.
Anyway, even with the PL/SQL block the error message is the same - ORA-00933 "SQL command not properly ended"
and the cursor (* in SQL*PLUS) is put just at the first bracket.
Edited by: user636213 on Aug 10, 2012 5:17 AM

Problem with % signs in key value url parameter pairs

Hi,
Tomcat 5.5.9
Java Version 1.5
I'm having a little difficulty passing a certain key value pair via a URL to the processing component of my web application.
If I submit a value for lets say parameter 'product_name' and that value starts with a % sign then the value is passed to my processing component as 'null' if I remove the % sign the value is correctly received.
Anyone come accross this on a Tomcat server?
The data has to be tagged onto the URL rather than as a form 'Post', as it is used to create and populate a popup window.
Thanks in advance.

So the % is used in URLs to mark certain escape sequences, so when you put it in you value, it thinks that the value is actually an escape sequence, and probably translates poorly on the opposite side.
You will actually need to use the escape sequence for the % sign to get it work correctly. I don't recall the actual escape value, but:
If you use JSTL to put together the URL for you, you shouldn't have a problem, the values will be escapes:
<c:url var="popupAddress" url="http://www.mydomain.com/myapp/mupage.jsp">
<c:param name="product_name" value="%Whatever"/>
</c:url>
<script type="text/javascript">
document.open("<c:out value="${popupAddress}"/>","Popup");
</script>

Xml/html to jsp - problem with quotes in attribute values

I am trying to convert a static html document into a jsp using an xsl stylesheet, but run into problems trying to use the jsp expression syntax inside of attribute values.
Here is a sample of the source file:
<input type="text" name="firstName" value=""/>
Here is what I want the resulting jsp file to look like:
<input type="text" name="firstName" value="<jsp:expression>customer.getField("firstName") </jsp:expression>">
Here is what part of my stylesheet looks like:
<xsl:template match="input">
<xsl:copy>
<xsl:copy-of select="@type"/>
<xsl:copy-of select="@name"/>
<xsl:attribute name="value">
<xsl:text disable-output-escaping="yes"><jsp:expression></xsl:text>
<xsl:text disable-output-escaping="yes">customer.getField(</xsl:text>
<xsl:text disable-output-escaping="yes">"</xsl:text>
<xsl:value-of select="@name"/> ")
<xsl:text disable-output-escaping="yes">")</xsl:text>
<xsl:text disable-output-escaping="yes"></jsp:expression></xsl:text>
</xsl:attribute>
</xsl:copy>
</xsl:template>
The problem i have is with the <%= customer.getField("firstName") %>. I have tried several different ways of inserting the double quotes around firstName, but no matter what I try, it always uses the entity reference instead of actually putting the " character. The jsp container will not accept the entity.
I am assuming that the problem is with trying to place double quotes inside of an attribute value. Any ideas how to get around this?
Thanks
David

Which App Server are you using?
You should just be able to escape the double quotes.
If that doesn't work, it's a bug in the app-server.
Alternatively, you can use single quotes around the
attribute value.
Hope that helps,
AlexSorry, I'm an idiot. By escaping you meant the unicode character escape "\u0022". I had not tried that. However, once i realized what you meant, I tried it, and it worked. Thanks for your help.
David

Problem with standard distribution function

Hi,
The task is following:
There are three cubes - one with data to be distributed (non-transactional), one with reference data (non-transactional) and one where the distributed data should be written (transactional).
I am trying to use standard IP planning function Distribute with Reference Data to achieve the result. However when I put 0INFOPROV as a characteristic to be changed, I can select value for it only in block FROM and TO, and not in REFERENCE DATA SELECTION.
So to tell the system, taht reference data are located in third cube I have added new car which for the is always filled with constant in the reference cube (for every record).
But it seems that it does not help: When trying to execute, following error message appears: Cannot find reference data for sub-process 1 of the function
Anywone has ever customied standard function in a way that it is able to use data from three cubes? What do I do wrong?
Thanks in advance,
Marcin
ps. I work with IP, but assume that BPS is very similar regarding stadard planning functions, so any suggestion is welcome.

of course you can include 0infoprov into fields to be changed, but in your szenario it wouldn' make any sense.
if fox formulas you set values for 0infoprov by yourself, in distr. function you are telling the system: distribute origin field value for char xy according all posted values in certain reference records.
as 0infoprov is a technical infoobject and given the fact that your reference records are stored in cube 3 which is non transactional as well) -> to tell the function, that your reference records are stored in cube 3 you have to set 0infoprov as reference char.
if you can not copy all data before distribution (to be honest i don't see any reason why this shouldn't be possible) you could only ditribute the values using function of type fox or exit.

Problems with convertNumber and Double values

I've serious troubles using convertNumber with Double data in input fields.
While output formatting works fine, the outputted string fails to be converted back - I get conversion errors.
So the value that is written to the input field generates a conversion error being submitted! This is not good practice!
I've found out the following: (I use german locale, so following examples containing ',' means decimal point)
<f:convertNumber pattern="##0.00" />generates the right output, eg. for Double(20.50) - "20,50", but this value ("20,50") will not be parsed using the above pattern! Only values with non zero last minimum fractional digit (eg "20,51", "20,59", ... ) will be parsed!
In addition, the above pattern doesn't parse numberstrings that don't contain all significant digits.
For example an input of "20" will not be parsed to "20.00"!
Maybe this is not the right forum for that problem, since i think this is a general java formatting problem (?).
But as the problem arised by using the convertNumber tag and acting like this on numeric input fields is not very comfortable, I liked to post this here. Maybe someone can give me some advice?

I also have found this problem, except that in my experience it is the decimal part that must be non-zero, not just the last digit of the decimal part. So with a pattern of "0.00" the string "1.50" (one and a half) will be accepted whereas the string "1.00" will not.
My guess (just a guess) is that it is related to the documented behaviour of the DecimalFormat object when it parses a number. According to the documentation:
The most economical subclass that can represent the number given by the string is chosen. Most integer values are returned as Long objects, no matter how they are written: "17" and "17.000" both parse to Long(17). Values that cannot fit into a Long are returned as Doubles. This includes values with a fractional part, infinite values, NaN, and the value -0.0. DecimalFormat does not decide whether to return a Double or a Long based on the presence of a decimal separator in the source string. Doing so would prevent integers that overflow the mantissa of a double, such as "10,000,000,000,000,000.00", from being parsed accurately. Currently, the only classes that parse returns are Long and Double, but callers should not rely on this. Callers may use the Number methods doubleValue, longValue, etc., to obtain the type they want.
Which means that "1.50" will be returned as a Double while "1.00" will be returned as a Long. Perhaps there is then a class-cast exception whie trying to use this value?
If this is indeed the problem, the solution is to use the getDouble() method of the parsed Number to create the Double to be returned, but this is for the implementer to do - not the user!

Problem with data distribution from HCM to e-Recruiting

Hello masters:
I have a problem when I try to distribute data from HCM to e-Recruiting. I´m getting code 51 just for the PA infotypes segments (E1P0000, E1P0001, etc.). The error message tha I am receiving is:
"Error in subroutine read_namtb for structure of infotype".
My e-Recruiting system is SAP EHP 1 for SAP NetWeaver 7.0, so I'm using Business Partners for storing data from PA infotypes.
I'm using message type HRMD_ABA, basic type HRMD_ABA05.
I think it could be the implementation HRRCF00_INBD_NEWMOD from the badi HRALE00INBOUND_IDOC, because it usually get inactive even though I go to activate it.
Does anybody knows what can I do?
Thanks in advance!
Edited by: Rodrigo Arenas Arriola on Jun 25, 2009 2:45 AM

Hello Rodrigo,
Ifyou are using EhP1 for NW 7.0 you should have E-Recruiting 600 EhP 4 on your system.
I never encountered this special error message so far, so i have to "guess". The message indicates that the system had trouble reading some infotype information.
The ALE distribution for EhP4 is storing the PA data in new infotypes 558*. The error you get points to a missing BAdI activation. If the BAdIs are not activated correctly, ALE will try to write the information from the PA infotypes 1 to 1 into the E-Recruiting system. But E-Recruiting does not know the PA infotypes which should exactly lead to the error you get.
Could you check the following settings:
BAdI                     Implementation
HRSYNC_P                 CONV_HR_DATA_TO_EREC -> active
HRALE00INBOUND_IDOC      HRRCF00_INBD_NEWMOD -> active
HRALE00SPLIT_INBOUND     HR_INB_PROCESS_IDOC -> inactive
HRALE00INBOUND_IDOC      HRRCF00_DELETE_SPREL -> inactive
Kind Regards
Roman

Problem with Enumerated drop-down values in Adobe Forms (WD java)

Hi All,
have a scenario where, I have to fill in a dropdown dynamically when I click a button. I get the values from a function module. I have done this using Isimpletypemodifiablestep. It worked.I have the form too. But when I try to re-implement the same its working only if I give the values during initialisation .
Why is this inconsistent?
Can we modify Simple types only during initialization? I have tried to add the values to the drop-down in controller and map the attribute to view. Even that didn't work.
I'm
Am using Adobe Live cycle designer 7.1 and NWDS 7.1
SAP 2004s SP15
Thanks,
Vasu

Hi Arafat,
I have tried that already. It didn't work. As of now, I've copied the form thats working into the new project.
But I didn't find a solution for the problem.
Thank you,
Vasu

Problems with cost distribution "by value"

Similar Messages

Maybe you are looking for