Problems with custom roms and recovery

Hello, recntly ive unlocked the bootloader of my xperia z2 and flashed xzdualrecovery and paranoid android. a few days later paranoid android had problems with calling so ive decided to flash another rom so i downloaded the aroma installer of existenz ultimate 3.0 and tried to install it with cwm recovery. it didnt work on cwm so i tried to install twrp with a 1-click twrp flashtool. i didnt get the twrp recovery working so i ened up still having cwm. then i rebooted my phone into flashmode/fastboot mode to flash my recovery with fastboot witch didnt work either. i booted back to cwm and flashed cm11s for the xperia z2. but then when i started booting up into thesystem my phone stuck in the bootanimation, so i tried to flash the boot.img from the rom but my phone wont enter fastboot mode.

You should check the XDA Forum
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
    private static final String DEFAULT_STYLE_CLASS = "test-input";
    private TextField           textField;
    private int                 id;
    public TestInput(final int ID) {
        super();
        id = ID;
        textField = new TextField();
        init();
    private void init() {
        getStyleClass().add(DEFAULT_STYLE_CLASS);
    public TextField getTextField() {
        return textField;
    @Override protected String getUserAgentStylesheet() {
            return getClass().getResource("testinput.css").toExternalForm();
    @Override public String toString() {
        return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
    private TestInput control;
    private TextField textField;
    private boolean   initialized;
    public TestInputSkin(final TestInput CONTROL) {
        super(CONTROL, new TestInputBehavior(CONTROL));
        control     = CONTROL;
        textField   = control.getTextField();
        initialized = false;
        init();
    private void init() {
        initialized = true;
        paint();
    public final void paint() {
        if (!initialized) {
            init();
        getChildren().clear();
        getChildren().addAll(textField);
    @Override public final TestInput getSkinnable() {
        return control;
    @Override public final void dispose() {
        control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
    private TestInput control;
    public TestInputBehavior(final TestInput CONTROL) {
        super(CONTROL);
        control = CONTROL;
        control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
            @Override public void handle(final KeyEvent EVENT) {
                if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
                    keyPressed(EVENT);
        control.focusedProperty().addListener(new ChangeListener<Boolean>() {
            @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
                if (isFocused) { isFocused(); } else { lostFocus(); }
    public void isFocused() {
        System.out.println(control.toString() + " got focus");
        control.getTextField().requestFocus();
    public void lostFocus() {
        System.out.println(control.toString() + " lost focus");
    public void keyPressed(KeyEvent EVENT) {
        if (KeyCode.TAB.equals(EVENT.getCode())) {
            control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
    -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
    TestInput input1;
    TestInput input2;
    TestInput input3;
    TextField input4;
    TextField input5;
    TextField input6;
    Scene     scene;
    @Override public void start(final Stage STAGE) {
        setupStage(STAGE, setupScene());
    private Scene setupScene() {
        input1 = new TestInput(1);
        input2 = new TestInput(2);
        input3 = new TestInput(3);
        input4 = new TextField();
        input5 = new TextField();
        input6 = new TextField();
        GridPane pane = new GridPane();
        pane.add(input1, 1, 1);
        pane.add(input2, 1, 2);
        pane.add(input3, 1, 3);
        pane.add(input4, 2, 1);
        pane.add(input5, 2, 2);
        pane.add(input6, 2, 3);
        scene = new Scene(pane);
        return scene;
    private void setupStage(final Stage STAGE, final Scene SCENE) {
        STAGE.setTitle("Test");
        STAGE.setScene(SCENE);
        STAGE.show();
    public static void main(String[] args) {
        launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Problem with custom Reports and forms in R12

Hi All,
we are upgrading from 1103 to R12. In R12 we are facing a peculiar problem with Reports. All seeded reports are running perfectly. But no data is coming while running the custom reports. The operating unit field in the SRS window is getting populated automatically while running the seeded reports but getting greyed off while running custom reports.
We are facing the same problem with forms even, data is not getting retrieved in custom forms. Can any one suggest wether there is any profile option which is being missed out by us. ..
Thank you,
Regards
Raj

Add SRW.USER_EXIT('FND SRWINIT') in the afterPForm trigger.
This will set the org context for reports.
~Sukalyan Ghatak

Problem with Custom Theme and Color of Registers

Hi everybody,
I am implementing a custom theme with EP SP 15 (Sneak Preview). All the changes I am making in the Theme Editor are displayed correctly, except for the colors of the registers.
The preview in the Theme editor works fine but when I activate the theme in the portal the background of the registers is still the same as in the standard theme (the images for the borders or the registers however are the ones I chose).
I read about the caching problem in the SAP library and deleted the browser cache before saving but it didn't help.
Any ideas or hints would be appreciated!
Regards Andy

Hi,
If you are talking about custom registration page, accessed via login page, you have to change its background manually by editing logon package. There is a procedure on help.sap.com how to change logon page.
Here I'm pasting the necessary parts. But hava a look at original doc.
To customize the logon UI, we recommend the following procedure:
   1. Make a copy of com.sap.portal.runtime.logon.par.bak and rename it. In this example, it is renamed to my.new.logon.par.
   2. Move my.new.logon.par to a location outside of the <SAPJ2EEngine-deployment-dir>.
   3. Extract the files from my.new.logon.par preserving the directory structure.
   4. Modify files in the extracted PAR file.
   5. Put the modified files back into my.new.logon.par.
   6. Copy my.new.logon.par back to <SAPJ2Eengine-deployment-dir>\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\deployment\pcd.
   7. Rename the file <SAPJ2Eengine-deployment-dir>\cluster\server\ume\authschemes.xml.bak to authschemes.xml.
   8. In authschemes.xml, replace all occurrences of the string "com.sap.portal.runtime.logon" with "my.new.logon" in the tags <frontendtarget> and save the file.
   9. Restart the portal.
--> Changing the authschemes.xml File
You can change the authschemes.xml file using the Config Tool of SAP Web Application Server Java. When you edit the file, you should download the file to a local directory, edit it, and when uploading the edited file, create a new node in the configuration tree for it. In this way you do not loose the original version of the file.
       1.      Start the Config Tool by executing <SAPJ2EEEngine_installation>\j2ee\configtool\configtool.bat.
       2.      Choose the symbol for Switch to configuration editor mode.
       3.      In the tree, navigate to cluster_data u00AE server u00AE persistent u00AE com.sap.security.core.ume.service.
       4.      To switch to edit mode, choose (Switch between view and edit mode).
       5.      In the tree, select authschemes.xml and choose (Show the details of the selected node).
       6.      Choose Download and save the file to a local directory.
       7.      Edit the file locally.
       8.      Create a new node in the configuration tree for the edited file as follows:
                            a.      Select the node com.sap.security.core.ume.service.
                            b.      Choose the symbol for Create a node below the selected node ().
                            c.      Select the type File-entry.
                            d.      Choose Upload and select the file from your local directory.
                            e.      Enter the name for the entry, for example, authschemes_productive.xml. By default, the name of the uploaded file is used.
                              f.      Choose Create.
                            g.      Choose Close window.
The new node appears in the configuration tree.
For UME to use the new file, you have to change the value of the property login.authschemes.definition.file to the name of the new authschemes file. Change the property as described in Editing UME Properties.
       9.      Restart the nodes in the cluster for the changes to take effect.

Problems with custom FileSystemView and MultiSelection

Hi
I made a custom FileSystemView which can browse a ftp server. When the setMultiSelectionEnabled property is set to false, everythings working perfectly. The getSelectedFile method returns the correct selected file. However, when the multiselection is set to true, the getSelectedFiles method returns nothing, and the selected files doesnt even show in the JFileChooser "selected files" textfield.
I find it strange cause i thought the only thing multiselection was doing differently was creating a file object array instead of a single file object. So if single selection works, multiselection should work too, no?
Has this ever happened to anyone?

nope,
sorry enabling GEOMETRY_NOT_SHARED didnt do anything. i think it has something to do with the implementation of the SceneGraphIO interface.

JCheckBox as nodes in JTree having problems with custom renderer and editor

Ok, let me give some background. I have an XML document that I am parsing and reading in as a JTree. Works fine.
Next, I have overwritten the DefaultTreeCellEditor to return a JCheckBox and in this implementation of the getTreeCellEditorComponent(), I actually tell the node that he is selected. Works great.
Next, I have overwritten the DefaultTreeCellRenderer to return a JCheckBox and in the implementation of the getTreeCellEditorComponenet, I actually check to see if the Node is selected in the tree based upon the isSelected state of the actual Tree Node set in the tree cell editor, and if so, I set the JCheckBox to selected(true).Works Great.
Now, here is the issue. If a node in the tree is selected that contains children, then I want all of the children of that node to also be selected. However, when I select a node with children only the selected node is changed, and then a few moments later, the system repaints the entire tree and ALL nodes int the tree are set to a selected state. Strange? Yes. Any ideas?? WONDERFUL!! :)
Here is the TreeCellEditor code:
public Component getTreeCellEditorComponent(JTree tree,
Object value,
boolean isSelected,
boolean expanded,
boolean leaf,
int row)
elementCheckBox_ = new JCheckBox();
Component result = null;
System.out.println("isSelected? Editor = " + isSelected);
TreePath newPath = tree.getPathForRow(row);
System.out.println("value = " + value.getClass().toString());
if(value instanceof IMarketTreeNodeElement)
if(isSelected)
if(((IMarketTreeNodeElement)value).isSelected())
((IMarketTreeNodeElement)value).setSelected(false);
else
((IMarketTreeNodeElement)value).setSelected(true);
elementCheckBox_.setSelected(isSelected);
return elementCheckBox_;
Here is the TreeCellRenderer code:
public Component getTreeCellRendererComponent(JTree tree,
Object value,
boolean selected,
boolean expanded,
boolean leaf,
int row,
boolean hasFocus)
Color colSelBorderCol = UIManager.getColor
("Tree.selectionBorderColor");
selBorder_ = BorderFactory.createLineBorder(colSelBorderCol, 1);
normBorder_ = BorderFactory.createEmptyBorder(1,1,1,1);
elementCheckBox_.setText(value.toString());
if(selected)
elementCheckBox_.setSelected(selected);
elementCheckBox_.setForeground(Color.YELLOW);
elementCheckBox_.setBackground(Color.RED);
else
elementCheckBox_.setForeground(tree.getForeground());
elementCheckBox_.setBackground(tree.getBackground());
if (hasFocus)
elementCheckBox_.setBorder(selBorder_);
else
elementCheckBox_.setBorder(normBorder_);
return elementCheckBox_;
Here is the Node Code setting all child nodes to selected:
public void setSelected(boolean selected)
isSelected_ = selected;
if(isSelected_)
if((this.getTagName() == "MARKET") ||
(this.getTagName() == "TIER") &&
(this.getChildCount() != 0))
selectChildren(true);
else
if((this.getTagName() == "MARKET") ||
(this.getTagName() == "TIER") &&
(this.getChildCount() != 0))
selectChildren(false);
public boolean isSelected()
return isSelected_;
public void selectChildren(boolean selected)
int children = getChildCount();
for(int i = 0; i < children; i++)
IMarketTreeNodeElement elem = (IMarketTreeNodeElement)
this.getChildNodes().item(i);
isSelected_ = selected;
Thanks for any help! :-)

I tried to run your sample code and it won't compile. The header files:
#include
#include
#include
#include
#include
do not exist on my install of MeasurementStudio. I am a bit suspicous that I don't have the latest and greatest (loading the dialong resouce gave version warnings). Here is one of my header file headers:
//==============================================================================
// Title : NiAxes3d.h
// Copyright : National Instruments 1999. All Rights Reserved.
// Purpose : Defines the CNiAxes3D class.
//==============================================================================
I
looked on your updates site and don't really see an update that applies to ComponentWorks or MeasurementStudio. My version per the MAX program for 3DControls is 3.5.549.
Do I need a newer version? What do I have to do to get the updated version? What does it cost?
Chuck

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Problems with custom roms and recovery

Similar Messages

Maybe you are looking for