Problems with desupported clients after server migration to 11.2.0.2

We are planning to migrate our database from 10.2.0.4 on Windows Server 2003 (32-bit) to 11.2.0.2 on Windows Server 2008 R2 (64-bit). Therefore we installed a test server and did a test migration of our development database instance. The migration itself worked quite well. Accessing the new test server using supported clients also succeded.
The problem is that we still have Windows clients in our company that have a (desupported) Oracle 7.3 Client and ODBC Driver (Oracle73 Ver 2.5, SQO32_73.DLL) installed. Each connection attempt by such a client (if they know the server's IP address and instance name) results in one server CPU core going to 100% CPU Usage. The clients gets an "ORA-03113: end-of-file on communication channel." error. The core CPU usage stays at 100% until the database is shut down.
Setting "SQLNET.ALLOWED_LOGON_VERSION = 10" in SQLNET.ORA does not solve the problem. It seems that the listener allows the connection and then something goes wrong before the connection can be blocked by SQL*NET.
Any ideas how to detect and prevent connection attempts by Oracle 7.3 clients at a lower level? I already did a lot of research on the net without finding a solution. Thanks in advance!

user2709692 wrote:
We are planning to migrate ... to 11.2.0.2 on Windows Server 2008 R2 (64-bit).
The problem is that we still have Windows clients in our company that have a (desupported) Oracle 7.3 Client and ODBC Driver (Oracle73 Ver 2.5, SQO32_73.DLL) installed. Each connection attempt by such a client (if they know the server's IP address and instance name) results in one server CPU core going to 100% CPU Usage. The clients gets an "ORA-03113: end-of-file on communication channel." error. The core CPU usage stays at 100% until the database is shut down.Perhaps you could search MOS for related Bug reports (against the server version) or open a SR about this fatal behaviour. (They hopefully want to remove/cure any flaw that could allow connection attempt resulting in cpu spin, regardless of client.)

Similar Messages

  • Problem with Lion upgrade after running Migration Assistant

    I have a MacBook Pro that I purchased earlier this year.  I bought a new MacBook Air yesterday. 
    I used Migration Assistant to migrate some of my data/settings from my old MacBook Pro to the new MacBook Air.  After the migration, all of my original data was still available on the MacBook Pro (good as I wanted to keep a copy on the MacBook Pro and not all data was migrated).  The new MacBook Air received all the right data and is working well.
    I then purchased a Lion upgrade for my MacBook Pro and started the installation process.  The installation process seemed to be going fine, but the MacBook Pro eventually hung.  I let it "run" overnight hoping that it would finish the process, but the machine was still hanging a day later.  I forced the MacBook Pro to shut down using the power button.  Now, when I restart the MacBook Pro, I get the "Mac OS X Utilities" screen asking if I want to Restore from Time Machine Backup, Reinstall Mac OS X, Get Help Online, or Disk Utility.  Does this mean my data is not longer available on the MacBook Pro?  Also, I do/did have the MacBook Pro connected to a Time Machine and it had up-to-date backups at the time I ran Migration Assistant.  However, I noticed that after running Migration Assistant, the MacBook Pro was complaining that it was no longer connect to the Time Machine. 
    My instinct tells me that I should attempt to restore the MacBook Pro using the Time Machine backup, but I'm wondering if it might be able to revive the MacBook Pro without having to take that step.  Or, maybe I should select the "Reinstall Mac OS X" option first?  Any ideas?
    If I need to use the Time Machine backup, do I need to do anything special given the post Migration Assistant behavior I described above?
    Thanks for any advice!

    How can I fool Time Machine into using the original Backup Folder and just doing an incremental backup?
    You can't. after using MA on it you have to start a new backup sequence. you can change computer name in Sharing preferences to anything you like but it won't affect TM backups.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Problem with OLAP SAPBI SHOWING Server in not responding

    Hi All,
    Problem with OLAP SAPBI SHOWING Server in not responding
    SBO0001)",
    Iam Creating a universe , When iam Retriving my olap cube query it showing the error "Server in not responding (SBO0001)",
    Thanks In advance
    Praveen Kumar Yagnamurthy

    I am receiving this same error.  I have these additional details:
    CS: COM Provider CLSID not specified or erroneous
    In my case, this is for a universe that I created in BOE XI R2 sp5.4 and migrated up to BOE XI 3.2 sp2.  This connection uses OLEDB.  I have the same situation with another universe that I migrated over that uses an ODBC connection and it works fine.
    In my case, I am not using OLAP.

  • Problems with QuickVPN client

    Hello,
    I experiance problems with QuickVPN client (version 1.4.1.2). I'm trying to connect to router SA520 with 1.1.65 firmware,
    vpn tunell is established, but client says "The remote gateway is not responding. Do you want to wait?"
    in case i click no, it drops vpn tunell
    QuickVPN client log looks like this:
    2010/08/18 12:13:27 [STATUS]OS Version: Windows 7
    2010/08/18 12:13:27 [STATUS]Windows Firewall Domain Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]One network interface detected with IP address 192.168.1.100
    2010/08/18 12:13:27 [STATUS]Connecting...
    2010/08/18 12:13:27 [DEBUG]Input VPN Server Address = vpn.in-volv.lv
    2010/08/18 12:13:28 [STATUS]Connecting to remote gateway with IP address: 78.28.223.10
    2010/08/18 12:13:28 [WARNING]Server's certificate doesn't exist on your local computer.
    2010/08/18 12:13:30 [STATUS]Remote gateway was reached by https ...
    2010/08/18 12:13:30 [STATUS]Provisioning...
    2010/08/18 12:13:39 [STATUS]Success to connect.
    2010/08/18 12:13:39 [STATUS]Tunnel is configured. Ping test is about to start.
    2010/08/18 12:13:39 [STATUS]Verifying Network...
    2010/08/18 12:13:44 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:47 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:50 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:53 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:56 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:14:08 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2010/08/18 12:14:12 [STATUS]Disconnecting...
    2010/08/18 12:14:15 [STATUS]Success to disconnect.
    Server logs look like this:
    2010-08-18 12:28:49: INFO:  Adding IPSec configuration with identifier "arvils"
    2010-08-18 12:29:02: INFO:  Configuration found for 83.243.93.200[500].
    2010-08-18 12:29:02: INFO:  Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
    2010-08-18 12:29:02: INFO:  Beginning Identity Protection mode.
    2010-08-18 12:29:02: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 12:29:02: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 12:29:02: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  For 83.243.93.200[500], Selected NAT-T version: RFC 3947
    2010-08-18 12:29:02: INFO:  NAT-D payload matches for 78.28.223.10[500]
    2010-08-18 12:29:02: INFO:  NAT-D payload does not match for 83.243.93.200[500]
    2010-08-18 12:29:02: INFO:  NAT detected: PEER
    2010-08-18 12:29:02: INFO:  Floating ports for NAT-T with peer 83.243.93.200[4500]
    2010-08-18 12:29:02: INFO:  ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:e2cd855a75fc0887:6dc3b2e025152444
    2010-08-18 12:29:02: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 12:29:02: INFO:  Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
    2010-08-18 12:29:02: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
    2010-08-18 12:29:02: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 12:29:02: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=47693803(0x2d7bfeb)
    2010-08-18 12:29:02: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=1079189482(0x40531fea)
    2010-08-18 12:35:57: INFO:  an undead schedule has been deleted: 'pk_recvupdate'.
    2010-08-18 12:35:57: INFO:  Purged IPsec-SA with proto_id=ESP and spi=1079189482(0x40531fea).
    2010-08-18 12:40:46: INFO:  Configuration found for 83.243.93.200[500].
    2010-08-18 12:40:46: INFO:  Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
    2010-08-18 12:40:46: INFO:  Beginning Identity Protection mode.
    2010-08-18 12:40:46: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 12:40:46: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 12:40:46: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  For 83.243.93.200[500], Selected NAT-T version: RFC 3947
    2010-08-18 12:40:46: INFO:  NAT-D payload matches for 78.28.223.10[500]
    2010-08-18 12:40:46: INFO:  NAT-D payload does not match for 83.243.93.200[500]
    2010-08-18 12:40:46: INFO:  NAT detected: PEER
    2010-08-18 12:40:46: INFO:  Floating ports for NAT-T with peer 83.243.93.200[4500]
    2010-08-18 12:40:46: INFO:  ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:28447d39874689f9:a2b7da19d8d86413
    2010-08-18 12:40:46: INFO:  Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
    2010-08-18 12:40:46: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
    2010-08-18 12:40:46: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 12:40:47: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=259246202(0xf73c87a)
    2010-08-18 12:40:47: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=3642234214(0xd9181566)
    2010-08-18 12:43:27: INFO:  IPsec-SA expired: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=33356156(0x1fcf97c)
    2010-08-18 12:45:47: INFO:  an undead schedule has been deleted: 'pk_recvupdate'.
    2010-08-18 12:45:47: INFO:  Purged IPsec-SA with proto_id=ESP and spi=3642234214(0xd9181566).
    The most interesting thing is that sometimes this message appears, sometimes not (with the same configuration).
    Please help!

    Hi,
    I have some problem. I am using Windows 7 Entreprice x64. I use SA520 Firmware 1.1.65 and QuickVPN 1.4.1.2 port 60443.
    "The remote gateway is not responding. Do you want to wait"
    2010-08-18 17:25:51: INFO:  Adding IPSec configuration with identifier "username"
    2010-08-18 17:25:51: INFO:  Adding IKE configuration with identifer "username"
    2010-08-18 17:26:04: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:26:04: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=>xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:04: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:26:04: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:26:04: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:26:04: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:26:04: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:26:04: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:04: INFO:  NAT detected: ME PEER
    2010-08-18 17:26:04: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:26:04: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:ed4f291c71c1b688:7e6a8a0968f878fb
    2010-08-18 17:26:04: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 17:26:04: INFO:  Responding to new phase 2 negotiation: 172.22.5.10[0]<=> xxx.xxx.xxx.xxx[0]
    2010-08-18 17:26:04: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.170.224/32
    2010-08-18 17:26:04: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 17:26:05: INFO:  IPsec-SA established[UDP encap 48540->4500]: ESP/Tunnel xxx.xxx.xxx.xxx->172.22.5.10 with spi=239099274(0xe405d8a)
    2010-08-18 17:26:05: INFO:  IPsec-SA established[UDP encap 4500->48540]: ESP/Tunnel 172.22.5.10-> xxx.xxx.xxx.xxx with spi=3886848189(0xe7ac98bd)
    2010-08-18 17:26:07: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:26:07: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:07: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:26:07: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:26:07: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:26:07: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:26:07: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:26:07: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:07: INFO:  NAT detected: ME PEER
    2010-08-18 17:26:07: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:26:07: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
    2010-08-18 17:27:14: INFO:  Purged ISAKMP-SA with proto_id=ISAKMP and spi=699f34b434d4318c:df4adca414787d36.
    2010-08-18 17:27:14: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:27:14: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
    2010-08-18 17:27:14: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:27:14: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:27:14: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:27:14: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:27:14: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:27:14: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:27:14: INFO:  NAT detected: ME PEER
    2010-08-18 17:27:15: INFO:  ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
    2010-08-18 17:27:15: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:27:15: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
    2010-08-18 17:27:15: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 17:28:20: INFO:  Purged ISAKMP-SA with proto_id=ISAKMP and spi=3fe5eb0bddbf2b9a:f5c11d7f813ca74a.
    2010-08-18 17:28:21: INFO:  ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
    With windows XP Pro i dont have this problem.
    Is there a detailed configuration guide?
    10x

  • Problem with Time Capsule after backup session

    I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule  and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it.  The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
    I would be grateful for your help!
    Thor

    This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
    Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
    I recommend you
    1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
    TC name and wireless name/s should conform. By default the disk share name is data which is fine.
    2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
    This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
    So do it manually and force it back to AFP.
    In Finder use top menu, Go, Connect to Server.
    Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
    When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
    3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
    I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

  • We encountered a problem with some client machines that use Firefox version 24ESR and IE8. Ajax requests of aspx pages from Firefox are getting the following er

    I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
    Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
    Bad Request - Request Too Long
    HTTP Error 400. The size of the request headers is too long.
    From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
    I tried to disable the viewstate for one page and the server got the request correctly.
    I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.

    Sometimes that means that the page address sent is loo long.
    Check the link address you are using.
    I can't help you further and will send for more help.

  • I have problem with login in sql Server give me support .pre login handshake

    I have problem with login in sql Server give me support .pre login handshake

    The following threads are on the same topic:
    http://www.sql-server-performance.com/forum/threads/pre-login-handshake-error-when-connecting-to-db.687/
    http://stackoverflow.com/questions/12308340/sql-server-2000-connection-error-pre-login-handshake
    http://dbaspot.com/sqlserver-server/458011-error-occurred-during-pre-login-handshake-microsoft-sql-server-error-10054-a.html
    Kalman Toth Database & OLAP Architect
    IPAD SELECT Query Video Tutorial 3.5 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with Variable Client Support

    Hello,
    I work with Labview 8.5 and Crio 9014.
    I have a problem with  Variable Client Support. When I try to compile my project I have the following error:
    "The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
    I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
    Can somebody help me?
    Thanks

    I have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI... 
    The Network Variable Engine and Variable Client Support must be installed on the RT target
    for this application to function properly. If the Network Variable Engine is not supported on
    the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
    to My Computer in the project. Doing this will deploy the variables to localhost but
    will still require that Variable Client Support be installed on the RT target.
    Could someone help please ? 
    Attachments:
    ni.png ‏95 KB

  • How do I get connected to a server on my network via an IP address?  When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

    I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path?  When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

    Some of the following is going to use some technical terms — this area is inherently somewhat technical. 
    If you don't understand some part of the following reply, please ask.
    Is this your own OS X Server system on your own network, or is this some other server within some larger organization? 
    You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
    If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured.   This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
    If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
    The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
    http://10.20.30.40
    UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share.  That's used if you're connecting to an Apple storage service somewhere on your network.  You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server.  (There can be additional requirements for connecting to Windows Server systems, too.)
    If there's local IT staff available here, please contact them for assistance.  If these are your own local systems and your own local OS X Server system, then some information on the server will be needed.  (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

Maybe you are looking for

  • Background processing in Flex

    I have two questions here. But, I guess they both are related 1. I have a calendar application, where I display set of events based on time for a day. I need to start a background process to check if any of the events are scheduled for the next half

  • Nano Died - Got a New because of Insurance - Computer Not Findng New Nano

    My Nano recently died. I had an insurance policy with the retailer. I took my old one in and they gave me a new nano...but, nothing else...no software, etc. Can I use the software I got 5 months ago? If so, what the heck is going on? I can't do anyth

  • Using Toslink-to-Coaxial adapter for P/SDIF out

    I need the P/SDIF signal to be in the coaxial (RCA type) plug format not the optical toslink that is the only available digital output on the AirPort Express. SIIG makes a Toslink-to-Coaxial adapter that looks like it would do the job: (http://www.si

  • TA24649 mac address needed to join wireless network

    i am unable to connect the device to our secured network without the mac address how do I get it?

  • How To Get Adobe Flash Movie To Work On Another Compter?

    Somebody please please help me. I use a English language Windows operating system, forgive me. I made an interactive book in Adobe Indesign CS 5. The content, which are all graphics, was all originally created in Adobe Illustrator CS5, but I exported