Problems with iweb and Internet Explorer

I'm having trouble with my iweb website - PC users using Internet Explorer can access my site home-page but find the navigation bar is blocked - covered by a green rectangle which does not allow the links to be explored. With Safari and Firefox the website works properly. Has anyone else experienced this?

Transparency (opacity in CSS) is one of those things that's used by those who know nothing about it or those who know a lot about and is best avoid by all the rest of us!
To create a class "transparent" to cover all bets would require something like this...
.transparent {
          /* Required for IE 5, 6, 7 */
          /* ...or something to trigger hasLayout, like zoom: 1; */
          width: 100%;
          /* Theoretically for IE 8 & 9 (more valid) */
          /* ...but not required as filter works too */
          /* should come BEFORE filter */
          -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
          /* This works in IE 8 & 9 too */
          /* ... but also 5, 6, 7 */
          filter: alpha(opacity=50);
          /* Older than Firefox 0.9 */
          -moz-opacity:0.5;
          /* Safari 1.x (pre WebKit!) */
          -khtml-opacity: 0.5;
          /* Modern!
          /* Firefox 0.9+, Safari 2?, Chrome any?
          /* Opera 9+, IE 9+ */
          opacity: 0.5;
For modern browsers we can use this...
.transparent {
          zoom: 1;
          filter: alpha(opacity=50);
          opacity: 0.5;
But how do we know what our visitors are using?

Similar Messages

  • Problem with ACE and Internet Explorer 8

    I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
    exactly:
    ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
    If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
    I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
    Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
    Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
    Please help.

    Hi Kazik,
    Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
    I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
    A showtech from the Admin context of the ACE
    A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
    If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
    Regards
    Daniel

  • IWeb and Internet Explorer

    Hi all,
    I am a technician at a college, and we're using iWeb to publish websites for the students' coursework. Upon checking the health of the published pages, it is apparent that many of the students' work is not appearing in Internet Explorer correctly. Several of the images and text boxes are not appearing in the correct place and are overlapping.
    So far browsing the forums a common answer appears to be 'Don't use Internet Explorer', however given that it is the world's most widely used web browser, and that we have no control over what browser the coursework moderators will be using when sample work is sent away, we are looking for a proper solution to this problem.
    We are using intel-based macs with the latest version of iWeb and OSX.
    Thanks in advance.
    Message was edited by: carmel_college

    Welcome to the Apple Discussions. Make sure you're using Web Safe Fonts and that text boxes are not overlapping or touching other text boxes or objects. Roddy's iWeb for Musicians has some good tips: How to get your iWeb Site to load in Internet Explorer. There may be some there that can help you.
    The suggestion about suggestion and offering Firefox is a very good one. You'll help bring many of the students into the 21st century.
    OT

  • Site problems in Firefox and Internet Explorer

    Here's my site: http://davesnowgraphics.com/DSG/Home.html
    Created in iWeb '08. Here is a list of problems. Solutions welcome.
    1) In all browsers: links to internal pages open up in a new window or tab. As an internal link, the option to "Open page in a new window" is not even available. I therefore assume that they should open in the same window, but most open in a new page or tab.
    2) In Firefox (both Mac and PC) the text spacing is messed up. Throws spaces in the middle of words and generally stretches text or letter spacing, making text returns seemingly at random. The fonts are all supposedly web safe (Trebuchet MS and Times New Roman).
    3) Site is TOTALLY jacked in Internet Explorer. Transparency of linked images dumped, making intended graphics solid white. Also on the PC (I don't have the Mac I.E.), my text gets hijacked by random text links with those annoying pop-up boxes that lead elsewhere.
    Is it possible for an iWeb-generated site to work in commonly-used browsers, or do I have to learn Dreamweaver?

    Okay, so I did some code experimentation and solved everything in my last post inquiry.
    Seems the entire line *onclick="window.open(this.href); return false;" onkeypress="window.open(this.href); return false;"* needs to be removed from the javascript that iWeb generates when you have a link associated with a graphic. Pain in the butt, but it works.
    Also did extensive searching for title= and manually changed the following text to what I wanted it to be.
    I'm interested to know if these issues are resolved with the iWeb '09 update. Anybody know?
    I also removed the graphics that I was using as links on the cubes. I put simple square shapes in the middle of the cube sides, made them transparent and assigned the link to them. They don't map the entire cube side as a link, but enough to make it functional. Also, for some reason, the fact that they're native iWeb-generated shapes and not placed graphics, they open up in the same page without having to delete the code line mentioned above.
    Still no solutions to the following I.E. issue in my initial post.
    I have the site open on my PC right now in IE. If you go to About > Services, the words "Business", "communication" and "Project Management" are green with double underlines. If I roll over them, I get a popup window with an advertisement for GameVance. What's up with that? Is that a setting in my local Internet Explorer properties that I need to disable?

  • Firefox is scaling down the photo sizes, along with chrome and internet explorer but Firefox's photos are usually smaller

    I sell products on a site, along with other sellers, that is owned by someone else.
    We have many sellers there. Some of us are having problems with how we are able to view the size of our photos taken of our products that are up for sale.
    From seller to seller, we have different versions of Firefox that we are using. I have the newest Firefox, which I believe is 4.
    I was having, like others who use 4, the same problem seeing smaller photos before I did the upgrade as well.
    It seems to be the case for most of us who are having the problem, that Firefox photos scale down smaller than Internet Explorer and Chrome.
    We have been told that this may be a browser issue as the site owners say they have not made any changes. At this point we are unsure since there are so many variations from seller to seller (keep in mind that some sellers are not seeing the photos scale down through their computer).
    We have asked the site owners to look into this problem further. I also wanted to see what the Firefox community had to say. Do you think it may be a browser issue? We would greatly appreciate your input.
    Below are some examples of photos that have been scaled down for the sellers who are seeing a problem with smaller photos while both in Firefox; all using different versions of Firefox:
    One photo that was originally the size of 419px by 1, 007px is being seen by one seller to a scaled down size of 81px by 64px.
    Another seller is viewing this same photo scaled down to 163px by 329px.
    Another seller is able to view this photo as the original size it was intended to be, which is 419px by 1, 007px.
    The above scenario has been the worst scaled down size we have heard of so far.
    Typically a photo that is the size of 1, 000px by 930px has been scaled down to 420px by 391px.
    There are other examples as to size, but you can see that the photos have been scaled down quite a bit.
    You can see that it has been scaled down to less than half of the original size. This can pose a real problem for us depending on the type of product that is being photographed.
    Thank you!!

    Thank you!!

  • Having a problem with iTunes and internet radio. The programme keeps changing stations

    I'm abroad at present and using a wireless connection at the lab. Itunes keeps changing internet radio stations as a function of time,
    Any suggestions or os it a known problem with the current version?
    Don

    Try the following user tip:
    "Invalid drive X:\" install errors

  • Problems with iWeb and mobile me

    Ciao everyone,
    I've been having a ridiculous amount of problems with my mobile me account and my iweb. 2 weeks ago I was fine with my iweb and mobile me but all of a sudden my iweb would say it publish but it really doesn't publish. The I went to the mac store a couple of times and thought I would get answers but I didnt get any answer even though I had a couple of one to one visits with a couple of stores in NYC. So when i publish it it shows that it published in my www.me.com/idisk/iweb folder but then it doesn't show in my website. Then one guy told me that I should just recreate a new site but copy and past all the old information to the new one. Now it won't publish at all because I guess its a lot of information to publish at once. I get an error message saying error iweb was not able to publish please try again later. Any help?

    Hey you guys,
    Thanks for the help, but I did try to publish all to my iweb and it didn't work. I do try to view my published website through the file/visit published site and for some reason only my intro page is there then when i go into the main page i get an error page. I also did go to my finder/Go/idisk/myidisk/iweb/site/iweb and saw my websites folder. Everything seems to be in it. I tried to take a screen shot of what is in my folder but I can't post pictures. In my folder I have a folder for gallery, index.html, site, shites.rss, and my website folder usvisualswebsite
    Any other suggestions? This is really frustrating. I also created another test site with nothing in it and published it and it says it finishes publishing but the blank test page isn't there.

  • Problems with Measurement and Automation Explorer (MAX)

    Hello LabVIEWers,
    I have been having a serious problem getting MAX to start and to remain stable. Here are the specifics:I am running LabVIEW 8.5 Full Development System on a Dell PC with 1GB of RAM and plenty of hard drive space. The OS is XP Pro and I also have McAfee Enterprise Virus Scan software.  MAX will start-up and appear to run for a few minutes and then the software bombs out. I get a "Measurement and Automation Explorer has encountered a problem and has to close" pop-up message. To fix the problem, I have uninstalled all NI software using MSI Blast. I have wiped the registry clean of NI keys as per instructions in previous posts. I have deleted any remaining NI software on teh hard drive including C:\program files\national instruments and C:\Documents and Settings\All Users\Application Data\National Instruments. I have then restarted the machine and did a complete fresh install from CD's, DVD's, and the harddrive (CD's written to hardrive and DVD written to harddrive first). I installed first the LabVIEW and then I installed the Device Drivers. I restarted the machine between installs. I have even installed the updated NIDAQ 8.6. After which I set protections on the NI directories to read/write. Ok, basically I have done all these things numerous times and I still cannot get things to work correctly.
    I was able to get into MAX for a little while (it is somewhat stable immediately after a fresh reinstall). I defined 4 Simulated DAQmx devices and none of them acted like they were simulated. I received various errors saying that the device was not found or could not be started. So I basically could not run my software with the simulated devices. LabVIEW sometimes seems to work ok but just now, I got a "Error loading nidmm_32.dll, initialization routine failed" error. I also get the same error for nilvaiu.dll. Both of these DLLs are in the C:\Program Files\IVI\Bin and  c:\windows\system32 directories respectively and prior to the last time I started the software, all worked ok with LabVIEW.
    Is my computer failing? Are there any other options to getting this installed without probems?
    Please help.
    Michael Froehlich

    Duplicate Post
    Keep discussion here
    National Instruments
    WSN/Wireless DAQ Product Support Engineer

  • Problems with modalPanel in Internet Explorer and Safari

    Hello there,
    I am working on a JSF (Richfaces) application. To handle advanced searches and confirm boxes I am using the richfaces modalPanel dialog, which uses Ajax. There are a number of re-rendering problems.
    1. First of all, any errors won't display in any browser (including Firefox). From what I can tell it has to do with it refreshing the page before the error message can be displayed in <h:messages />.
    2. In Safari and IE there is no refresh for advanced search dialog, where the modalPanel shows, but does not seem to call the search action and rerender the list. It's almost as if it does nothing. In IE it closes the dialog, but does nothing. In Safari it doesn't even close the dialog. I'm assuming this is relating to the JavaScript the RichFaces library uses. Any ideas??? I'm nervous to change frameworks at this time since I am in the last leg of the project.
    Here's a code example of the advanced search, which does not refresh the list screen.
    Code:
    <rich:modalPanel id="advancedSearch" width="220" height="420">
                 <f:facet name="header">
                    <h:outputText value="#{msgs.advancedSearch}" />
                 </f:facet>
                 <f:facet name="controls">
                         <h:graphicImage value="/images/btn_logout.gif" width="15" style="cursor:pointer" onclick="Richfaces.hideModalPanel('advancedSearch')" />
                 </f:facet>
                   <h:form>
                        <a4j:commandLink action="bookList" reRender="bookList"   oncomplete="{Richfaces.hideModalPanel('advancedSearch');}" >
                             <h:graphicImage class="searchIcon" id="advSearchGraphc" value="/images/btn_search_UP.gif" alt="#{msgs.search}" />
                        </a4j:commandLink>
                   </h:form>
             </rich:modalPanel>     As you can see I am calling reRender="bookList" which is the id of the datatable. From what I can tell the problem is something to do with the javascript not running properly on IE and Safari.
    <rich:dataTable width="644" id="bookList" rows="12" value="#{Book.list}" var="book">     How can I get around this?
    Any pointers would be hugely appreciated.
    Jared

    I suggest you to post your question in the JBoss RichFaces forum, good luck!

  • Problems with graphics and Internet connection - iMac 2011 with Lion

    First: sorry about my english... It is terrible! lol
    I have an 2011 iMac, purchased in June 2011 in the USA. I brought the iMac to Brazil.
    Sometimes when I turn on my iMac, the graphics are horrible and can not connect to the Internet. When this happens, I have to restart the Lion.
    Apple introduced the "iMac FW Graphic Update 3.0". The information says clearly that supports Brazilian Portuguese. Butwhen I install, an error appears: "this software is not compatible with your system".
    My Lion is in Brazilian Portuguese. Why it is not compatible? How do I install it? How can I solve this problem?
    Note: The technical assistance of Apple changed the HD, according to recall made ​​by Apple through the site. The HD is new.
    Thank you very much!

    Anybody? I'm buying a new network card simply but I'm not sure that it is the network card that is causing the network problems I'm experiencing.
    Regards
    André

  • Problems with iweb and safari - 'buttons' not working in safari/firefox...

    Hello. Help! I've been using iweb for a while with no probs - but on trying to launch my most recent site I'm finding the navigation buttons (graphic images not text buttons) work fine in iweb on my mac, plus fine on a PC but only partially in safari/firefox browsers... see sarahgreen.me and you will see that none of them work on the home page. Is this some kind of bug? I was wondering if it is anything to do with there being too many objects on the page or something? They are fine on a PC.
    Thanks for any ideas.
    Sarah

    In iWeb do Command-Shift-L to see the layout of the page.
    The content in the Navigation layer is blocking the content of the Header layer. The body layer is empty.
    Move ( +Use Command-drag+ ) EVERYTHING in the Navigation layer and EVERYTHING in the Header layer INTO the Body layer.
    Put content where it belongs.
    Message was edited by: Wyodor

  • QuickTime Player Problem with iWeb v3.0.4 and Safari v5.1.2

    iWeb v3.0.4 published web site with Safari v5.1.2:
    I'm in the process of creating a web site (www.koinonia.com) using iWeb v3.0.4.  There is an inserted QuickTime element on the home page which is playing an mp3 music file.  The QuickTime player (Show movie controller option in iWeb) does not work with Safari v5.1.2 (but does work fine with Firefox v9.0.1).  There should be a Movie Controller below the album jpeg image, but is not there with Safari.  Also, the movie (mp3 audio file) does not play automatically (plays fine with Firefox).  This looks to be a bug with Apple's iWeb / Safari applications.
    Does anyone know how to get the QuickTime element to play with Safari v5.1.2?
    Thanks

    Safari 5 running in Snow Leopard has been a problem for me. It screws up html, loads a distorted control bar in HTML5 and crashes every now and again when I do a Google search. Reporting these issues is a waste of time as the latest update had no fix. I test all my pages in Firefox and Chrome and don't bother much with Safari since less than 3% use it.
    I have the same issue as the OP. The file will only load in Safari if the page is open in Firefox at the same time.
    This problem arose over a year ago and is related to files imported from iTunes via the media browser. If the OP will confirm that the file came from iTunes, I will have a look at the meta data to see if there's anything there that iTunes has added.
    The only time I am forced to use iTunes is for apps that don't allow import from the finder such as certain situations in Keynote. Otherwise, I wish it would disappear down a black hole in the universe along with Windows and Internet Explorer.
    I converted the file to MP4 with QT Pro to prove the point that its the actual MP3 file that is causing the problem - along with Safari.
    I haven't depended on the QT Plugin for playing media for quite some time now. HTML5 now works in all modern browsers and should also work in IE 8 if the HTML5 Shiv is included in the head of the page.
    Its also a breeze to get flexible movies in responsive web design using HTML 5...
    http://www.ezmacwebdesign.com/Music-Website/index.html
    I don't bother too much with flash fallback anymore since these designs are mainly for mobile devices and I can ignore those who are reluctant to upgrade their out of date browsers.

  • Problem with ExternalInterface.call and Internet Explorer

    Hi, I´m developing a site, (
    www.gen-studio.com/avelart2
    ), and I´m using a swf to display a set of thumbs that when
    clicked show an item and its description on the browser, those
    items might be images or video, everything works fine with the
    images.
    And actually it works fine with the videos too, when using
    Firefox, but when I test the page on Internet explorer it just
    doesn’t work!
    On principle let me describe how it´s supposed to work,
    a thumbnail when clicked sends an id number to javaScript using
    ExternalInterface.call(“myFunction”,myId); -I´m
    using AS3 for the swf´s-
    the javaScript file has already loaded (ever since$(
    document).ready) a XML file which uses to match the id with a file
    and the description, if the item to show it´s a video, then it
    creates a variable which holds a string with the proper html to
    embed a swf (a swf movie player that resides just next to the HTML
    file), when loaded, the swf movie player uses
    ExternalInterface.call() to ask for the source of the video that
    has to play, and that function is as follows:
    setVideo: function(){
    alert("hola");
    return comun.miVideo;
    (The alert(“hola”); is just to test that the
    function is being called), which it is, but it returns null as a
    value instead of the proper string, and this happens only on
    internet Explorer, but works correctly on Firefox.
    I´ve been reading all day about the subject and found a
    few interesting things, which though have made me narrow my
    problem, they haven´t just provided me with a solution, what I
    found so far:
    -I must have in account flash security issues: Checked (my
    actionScript follows:)
    import fl.video.*;
    import flash.external.ExternalInterface;
    flash.system.Security.allowDomain("*");
    var vid:FLVPlayback = this.miPlayer;
    vid.source =
    flash.external.ExternalInterface.call("comun.setVideo");
    -ExternalInterface and Internet explorer don´t work
    properly when tested locally: Checked (I have a server on my PC and
    I´m testing the site as well in the above direction).
    -The object tag holding the swf must have a proper id
    attribute: Checked.
    -It´s super important the way the object tag is formed:
    Checked, and I also tested the tag separately (I put it directly in
    the HTML instead of adding it via javaScript) and it worked as
    expected in both Firefox and Internet Explorer, which leads me to
    believe:
    -I read somewhere that if you add the object tag by using
    innerHTML or appendChild, returning values from javaScript to swf
    won´t work, but I couldn´t find an explanation nor a
    solution.
    Well, as I said now I´ve been looking all day for an
    answer, so I really hope you can help me or give me some advice on
    the subject, thank you so much for your time!

    Hi! it solved itself !! (nahh, I wish), but it indeed had a
    solution, it was something quite simple, and I don´t really
    understand why it was not working in the first place, but here is
    the thing:
    I´m learning jquery and this is the first proyect
    I´m officially using it, so I was using
    $('#myDIV').append("string"); to embed the swf, (and it was working
    perfectly on Firefox), so since I had narrowed my problem to those
    lines, I decided to try some good-old-fashioned-javaScript and
    changed it for: var myDiv =
    document.getElementById('thatParticularDiv'); myDiv.innerHTML =
    ('string'); and it worked both in Firefox and IE !!!!!! :)
    I´m quite happy about it, and if someone knows
    what´s the issue with my jquery approach I would love to hear
    it. THANKS !!

  • I have internet explorer and having problems on working with adobe on internet explorer. i want to stay with internet explorer and use adobe that i think is with Google. i can't work on line  with adobe either because I am not with adobe.What do I do to k

    Need to know how I stay on internet explorer and still be able to use adobe. I have tried everything and nothing seems to work online or offline. help!!!

    Help me to how I can work with adobe on internet explorer. I also can not download online with adobe. What do I do?

  • Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    HP Smart Web Printing has been replaced with HP Smart Printing.  It does support Windows 7 and IE 6 to IE9.  See this page for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • How do you get the Apple Wireless Keyboard to accept function keys?

    I use the Apple Wireless Keyboard with my iPad2 and I use the VPN to connect to my work-related software which requires that I use some of the function keys as actual F1, F2, F3,...etc.  When I hit F2, the iPad2 responds with the Screen Brighter acti

  • Apple Extreme - External Hard Drive - Time Machine????????

    Can i connect an external hard drive to a apple extreme and use time machine for automatic back ups?  If so, how?

  • Vendor Payment before Due date

    Is there any setting whereby the system will not allow me to pay the vendor before the due date? Or else it will give the warning message for the due date.

  • Best approach to replicate the data.

    Hello Every one, I want to know about the best approach to replicate the data. First i clear the senario , i have one oracle 10g enterprise edition database and 20 oracle 10g standerd edition databases.The enterprise edition will run at center and th

  • Embedding the JRE

    I have written program that I want to run on a computer that doesn't contain the Java Runtime Environment. I am not sure how to go about this but i think it is possible by storing the JRE in a jar file along with the source code of the program, but I