Problems with KT3 Ultra2 and Barton 2500+

I have a very big problem.
I buy new Athlon XP2500+ ty my board.
KT3 Ultra2 support 166FBS, but AGP and PCI bus is overclock (83/42) and my system is very instabile. Now using 133FBS. Can I fix bus to 166/66/33???
My configuration:
Win98SE+WinXPSP1
MSI KT3 Ultra2 (bios version 5.7)
Athlon 2500+@1900+ (Barton 11*133, 1,65V)
+ Spire 5F271B1L3 FalconRock II™
256MB RAM DDR-400 Kingmax (CL2 at 333, 1.7V*)- sorry I mean 2.7V*
Daytona ATI Radeon 9000 64MB DDR
SB Live! Value
AMD 10/100 LAN adapter
40GB Seagate HDD
Lite-on combo
FDD teac
add: 4 april 2004 at 15:17
My PSU is Emko 300W ''JS-300 P4''parametres in:http://www.emko.cz/emko_cz/index.html
1900+ temps: CPU:                          Chipset:2500+ temps: CPU:                          Chipset:At 2500+
Stability configuration si withount SB Live! value and LAN.
result:     Memtest86                       - O.K.
              3DMark2001SE build330    - O.K.
              SiSoft Sandra 2003           - O.K.(burn-in: CPU and memory test 20time)

what sandra version did you use?
next to temps and psu, please tell us, what bios is installed. barton cpus require version 5.7
"(CL2 at 333, 1.7V)" did you mean 2.7V? cause 1.7V are llittle too low.
sj

Similar Messages

  • Mobile 2500 overclocking problems with KT3 Ultra2

    First off sorry for my poor english.. it's not my first language.  Now here's my system:
    CPU: Mobile 2500
    HSF: Vantec Aeroflow with AS5
    MB: MSI KT3 Ultra2
    RAM: 2x512MB PC2700
    VIDEO: Leadtek GeForce 4 TI4200
    The temperature is about 43C cpu and 40C case when the system is idle and it can get to 50C cpu and 43C case when the system is on maximum use.  
    So here's the situation...  I adjust the bus speed from 133 to 166 mhz..  I put the vcore voltage at 1.675 which is the maximum I can choose in the bios..  The multiplier is stuck on 14x..  When I try to run Prime95 or 3dmark03 my system is very unstable..  In prime95, one time it stopped after 10 minutes, the other time after 40 minutes.  In 3dmark03, I tried it at least five times and it usually stops during the second run of the tests.
    I'm very disappointed because I read a lot about this cpu before buying it and everyone was overclocking it easily so I had no doubt it would get to 166 mhz especially with proper cooling..  It sucks pretty bad!
    I hope some of you have some advices or suggestions on what I could try to make it work..  You are my last hope!  Thanks in advance!!

    Here comes another update...  Keep in mind that my cpu is currently at 14x166=2337 mhz.   I did some benchmark today and the results are starting to give me hope..  first I ran Prime95 for 14 hours without errors on the custom test with 2048-4096.  During this testing, the voltage went like this: 3.3V = 3.22V , 5V = 4.95V , 12V = 12.28V.  Is it normal?  Does it mean my power supply is good enough?  The specifications of the Power supply are : 3.3V-20A , 5V-30A , 12V-15A.  After that I ran all 3dmark03 tests three times without any glitches..  Then I played Far cry for about 20-30 minutes without any problems either.  
    Now what I'm wondering is if I run Prime95 without any problems but that 3dmark03 works sometimes and fail sometimes, can it help you guys to tell me what could be causing the instability?  
    Thank you again for all your help!

  • Upstart problem with kt3 ultra2

    When i turn the power on my computer it wont start properly.
    I hear 4 "beeps" and my screen is still black.
    I have to turn off and on my computer about five to ten times before it starts properly. :O
    When it starts up it works fine ?( and i can use it as normal.
    What is wrong and what can i do to fix it ?
    Help Me ?(  

    Quote
    Originally posted by camon
    When i turn the power on my computer it wont start properly.
    I hear 4 "beeps" and my screen is still black.
    According to http://www.pcguide.com/ts/x/sys/beep/ami.htm, this is a System Timer failure.  You might also try removing and reseating the RAM.
    --Barry

  • KT6 Delta/KT3 Ultra2 and MegaRAID SCSI failure

    Greetings,
    Synopsis:
    I have several MSI motherboards and a MegaRAID SCSI 320-2 RAID controller made by LSI Logic. In the older boards (K7D Master and K7T Turbo2), the controller works normally. In the newer boards (KT3 Ultra2 and KT6 Delta), the controller is unable to display its DOS based or "Web" based BIOS.
    I have changed numerous settings in the BIOS of the newer boards but nothing seems to allow me to configure the RAID controller. I also found the following link (https://forum-en.msi.com/index.php?threadid=16821&sid=&hilight=SCSI+RAID) to be interesting. Unfortunately, the suggestions therein did not effect a positive change.
    Details:
    Working boards:
    K7D Master Award BIOS W6501MS V1.1 030502 with 2 AMD Athlon MP 2000+ processors, 1 Gig DDR memory.
    K7T Turbo2 Award BIOS W6330MS V3.3 121901 with 1 AMD Athlon 1200, 512 Meg of SDRAM.
    Non-working boards:
    KT3 Ultra2 AMI BIOS A6380VMS V5.5 071002 with 1 AMD Athlon XP 2100+, 1 Gig DDR 333 MHz memory. PS actual reading: +5=5.030, +12=12.228, -12=-12.071, -5=-5.026. Single 450Watt PS.
    KT6 Delta AMI BIOS A6590VMS V5.5 021004 with 1 AMD Athlon XP 2600+, 1.5 Gig DDR 400 MHz memory. PS actual reading: +5=5.278, +12=12.045, -12=-12.400, -5=-5.277. Dual 450Watt PS.
    The non-working boards work normally without the RAID controller. In fact, they seem to work normally with the RAID controller save that they do not allow the RAID controller to enter configuration mode. They report that - will be executed at the end of POST but they just go to a boot attempt off the floppy drive.
    These same systems (the last two) also do not work with an AMI Enterprise 1400 RAID controller BIOS ver. 1.48 (latest version) or an LSI Logic made Mylex controller.
    Any suggestions on configuration changes, etc. that would allow these RAID controllers to work in the aforementioned motherboards would be greatly appreciated. Further information available if needed.
    -Motherboard type and model: See above.
    -Bios type and revision: See above.
    -CPU type and model: See above.
    -Memory name, model and quantity: See above and seemingly irrelevant.
    -Video card: AGP based, but all different.
    -Power Supply: See above.
    -Hard Drives: Seemingly irrelevant as none are hooked up.
    -Operating system and service pack level: Seemingly irrelevant as no OS is installed.

    I feel your pain buddy !!! it's the same thing for me.  I just got a LSI-22320 and I going through the same troubles.  I was really looking forward to having this nice card in my system, only to find out it would not even let the system boot.  I took the card out and pluged it in my Mom's older than dirt computer and IT WORKS !!... This was a very disapointing experience to say the least....
    Well, if you do here something good, please let me know...
    P.S.  Your SCSI-brother in pain :
    Eli
    [email protected]

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • Problems with the richTextEditor and quotes

    Hello
    I'm having problems with quote chars and the richText
    control's htmlText. When users enter quotes into the richTextEditor
    control. The quotes breaks the HTML text, meaning it's no longer
    well formatted. Is there an escape char that I need to use. Or do I
    need to force some kind of refresh on the control prior to using
    the htmlText string?

    I have been using RTE in a content management system and
    found a need to replace non-standard quote characters with proper
    UTF-8 character counterparts. Curly quotes in particular are
    problematic. Use a replace function to substitute non-standard for
    standard characters.

  • Problems with .ARW files and auto toning

    problems with .ARW files and auto toning
    let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
    now that I have a Sony A7R the problem is more serious
    Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
    but when I upload them to lightroom, they come out near black.
    allow me to explain
    lets say I import 100 images
    i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
    as the images import i see a preview in the thumbnail which looks fine.
    i double click on one to enlarge it, hence leave grid view.
    for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
    one by one as it inspects each image, if it was a DRO image it makes it too dark.
    to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
    how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
    i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
    but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
    now i have to tweak each file or find a profile for it which is added work.
    any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
    there are 2 phases...one is when it originally imports and they look fine
    second is scanning each image and applying some kind of toning which darkens it too much.
    thanks for the help

    sorry thats the auto reply message from yahoo email.
    i've disabled it now
    thing is, there is no DRO jpg to download from the camera
    its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
    but then sadly reverts it to no DRO settings.
    because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
    so in reality there is no point in using DRO because when i upload it lightroom removes it.
    is there a way to tell lightroom to preserve the jpg preview as it first sees it.
    its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
    what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • My iTunes says that there is a problem with my ipod and i have to restore it, but i bought songs on my itunes on my ipod not on the itunes on the computer so i have not transfered purchases and now it wont let me how doi restore without losingmy newsongs

    So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything.   Thanks

    There is a backup plan after doing the Restore.  Read this.

  • Anyone NOT having problems with ITunes 8 and latest firmware update???

    I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

    Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

  • Problem with java, ASCII and Linux

    Hi Friends,
    I has a Linux RedHat 9.0 with a jre1.5.0_04 (rpm package of Sun).
    I has a problem with ASCII , for example :
    import java.io.*;
    public class HolaMundo
    public static void main (String[] args)
    System.out.println("Hol� M�ndo");
    this programs runs ok on my windows jdk so it prints "Hol� M�ndo", but when i run the same HolaMundo.class program on my linux redhat it prints "Hol�� M��ndo"
    I think the problem is with the ASCII table that uses the linux version of jre, but i dont know how to solve this problem. I need a Spanish-European ASCII table on my application but i think it is working with a US-ASCII table.
    Then i has installed a kaffe 1.0 (rpm) java machie on this linux and this solve the problem but i has another problems of compatibility with this old version of java kaffe.
    Do you know whats happening?
    Thanks in advance.

    The problem doesn't have to do anything with Java or Linux as far as i can see. It's more likely a problem with Windows XP and IE. Be assured that normally downloading the Linux JDK in windows is not a problem.

Maybe you are looking for

  • How do I download my Music and Movies from my Apple TV to my MacBook

    How do I download my Music and Movies from my Apple TV to my MacBook

  • BI Content; FI-GL; Retained Earnings

    Hello, the following link leads to the SAP documentation on the FI-GL BI Content (query 0FIGL_C01_Q0010 "General Ledger: Structured Balances - Accumulated"): http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9d/5d788c65d211d3971c006094b969cf/frameset.

  • GUI "out of sync" with filesystem?

    We have one OS X Server (10.3.9) box here that is displaying a very odd problem. It appears that the only way to get an accurate view of what files are in what directories is from within Terminal. The GUI is not displaying files that really do exist

  • Error in list

    Hi I have a issue in my grid display.when i execute my report .i get grid display but when i scroll down i get Runtime Errors         MESSAGE_TYPE_X. how to solve this issue Regards

  • My iTunes is skipping songs on my iPhone 5?

    When trying to listen to my music on my iTunes on my iPhone it will skip songs and it does not matter if they are purchased or from a CD.   I have tried resetting my Apple ID and syncing to my computers with my phone.   I also have iTunes Match and H