Problems with License for Nokia Navigator

After I have upgraded the Firmware to 30.x.x I had to buy a new license for the navigator that is build in.
I had bought jun 2006 a two year license but the license key is not accepted anymore.
Because I needed the navigator I had to buy a new license.
I have bought one for 30 days in the assumption that I could contact Nokia quit easily to get a solution for this issue.
I have searched the entire website to contact Nokia about this but I can not find an e-mail address to get contact with the shop.
Does anyone has an contactpoint where I can address this issue to Nokia?
Peter

The licence is deleted during the update, but it is linked on the Nokia servers to your IMEI number so you didn't need to buy again, you should have gone to the Update option in the Maps menus to resynchronise your existing licence with the updated phone.
Nokia can be contacted via the "Contact us" link above.
Message Edited by mccbleue on 26-Sep-2008 08:31 PM

Similar Messages

Problem with mail for exchange after update on E72...

Hi everyone,
I updated Nokia E-mail to ver 3.9 on E72. Now I am facing a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
Can anybody suggest a way out.
Thanks
Anil

It could be a problem if you're using your network's connections...
I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
Could be worth checking with them to make sure it's supported.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Problem with license in SAP_NetWeaver701SR1_2008 TRial

Hi there my friends,
can someone help me here....i installed this trial in my virtual machine, but now i'm having problems with licensing it. I have requested license like it say's in the instalation, but i still can't login with BCUSER, only with SAP*...here are some screenshot's of the SLICENSE transaction.
and then i got the file by email to install the license, it turned green (in the new licenses)...
[Image - New Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/NewLicenses.jpg]
[Image - Old Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/OldLicenses.jpg]
and if i try to logon with bcuser after this i get this error
[Image - Logon Error|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/LogonImpossible.jpg]
can anyone please help me ? i have already many things done in that system
kind regards,
Ricardo Monteiro

Hi Key,
I have found a business objects Note 1198801.
Please have a look to it.
We can find Business objects Note/KBase from here
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true#]
For your reference have a look to content of that Note:-
1198801 - Error: "Crystal Reports: Application Error - Couldn't load the keydecoder.dll" when attempting to start Crystal Reports XI
Symptom
When attempting to start Crystal Reports XI, the following error message appears:
"Crystal Reports: Application Error - Couldn't load the keydecoder.dll".
Cause :
The error message occurs because the CommonFiles entry has the wrong path in the registry.
Resolution :
CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
To resolve the error message
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open: text field. Click OK. The Registry Editor appears.
Navigate to the following key: HKEY_LOCLAL_MACHINESOFTWAREBusiness ObjectsSuite 11.5Crystal Reports.
Double-click the CommonFiles string. The Edit String dialog box appears.
Ensure that the path points to the location of <installation directory>Common3.5 in.
For example, the default location is the following: C:Program FilesBusiness ObjectsCommon3.5 in.
Edit the path as necessary.
Click OK. Close the Registry Editor.
Crystal Reports starts successfully.
Hope that helps!!
Regards,
Shweta

Problem with License server

Hi All,
I am facing problem with license server. We have installed SAP Business One , Did License import, Installed patch 15 and than again DTW and every thing. Now when I want to connect through DTW, it gives error messege : connection to license server failed . Any help on it will be highly appriciated. Thanks,
Sabita

Hi Sabita,
Is it just the DTW that fails (ie can you log in to the SBO client)?
In newer versions of the DTW, the License Server setting in the log in screen needs to have both the server name (or IP address) and port number. For example:
MYSERVER:30000
where MYSERVER is the name of the server where the license service is installed and 30000 is the port number it is running under (30000 is the default).
Kind Regards,
Owen

"Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product."

Hi Guys!I am not it pro. but i need your HELP.Pls my microsoft Word and Excel starter were working fine, but after playing with my laptop, downloading , removing smth , i cannot open them proper anymore, cos this message comes up:
“Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product.”What can i do to make it work fine back? plssss need Help! thank u i n advance!!!!!!

I faced similar challenge. Re-installation did not solve the problem due to unsuccessful un-installation of ‘Microsoft Click to run 2010’. The following steps worked for me. Please use your discretion to try and see if it works for you too..
1 Uninstall Microsoft office Starter 2010. If
‘MS click to run 2010’ doesn't get uninstalled use Microsoft fix it tool meant for installing and uninstalling programmes, to uninstall the same.
2 Download ‘Microsoft Office Starter 2010’ from internet.
3 Before launching, right click the executable file and click the 'properties'. Go to
‘compatability’ tab and choose appropriate 'compatibility mode' as per your OS. Tick the check box to use admin privilege under
privilege level section.
4 Launch the executable to install Microsoft Office Starter 2010 afresh. It should go through four steps during installation now. Complete the steps and enjoy. Thanks !

Problem with facetime for mac

hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what...

Problem with Twitter for Mac notifications

Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.

Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS!

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
Hello,
On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
Take the demo: Curtain Call Demo
and within the instruments :
audio Recorder
Sampler
Smart Drums
Smart Strings
Smart Bass
Smart Keyboard
Smart Guitar
Keyboard
Drums
Guitar Amp
1.4.1 is the latest version for ios 6.
Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
With these instruments :
audio Recorder
Sampler ( to download the instrument )
Smart Drums ( to download the instrument )
Smart Strings (Download the instrument )
Smart Bass ( to download the instrument )
Smart Keyboard ( to download the instrument )
Smart Guitar
Keyboard
Drums
Guitar Amp ( to download the instrument )
and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
Complete collection of GarageBand instruments and sound at a price of : € 4.49
As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
And besides not wearing demo Demo Curtain Call : (
GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
regards

I've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?

I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

Please Help?! Problems with Viber for iPhone 4s

Please help!
I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
If anyone is able to help me out it would be much appreciated! Thanks

You activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.

We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

Problem with RpClean for Rep Development 3.0.L.0

Hello Forte Users :
We are running Forte 3.0.L.0 we previously upgraded from 3.0.J.1, 20
developer workspaces and a repository for both development and
deployment.
We are facing problems when we run an Rpclean for this Development
Repository, this process aborts with a fatal error message, the log
screen for this process issues the following messages
the deletion objects is made,
the repository compress is made,
the rebuild of the index is made,
but then when the process is creating back the repository it displays
"fatal error" and issues a message that it cannot truncate the .btx
file.
the command executed is :
rpclean -n Desarrollo -fr :/var/forte/repodesa -t /var/jaeb
Any experience on this regard?. If any, would be highly appreciated.
Jorge
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Jorge,
How big is your repsitory. Because if you are running on Digital Unix
you will have problems, when the repository is bigger then 1 gigabyte!
During the rpclean process a 'copy' is build and the unix system cannot
handle more than 2 gigabyte. I expect the maximum size of the repository
will be different for each operating system, but this might be your
problem!
Hans van Drunen
Origin DeskTop Business Solutions Rotterdam
Admiraliteitskade 60, 3063 DC Rotterdam
Telefoon : +31 10 - 242 81 00
Fax : +31 10 - 242 81 81
-----Original Message-----
From: Jorge Espinoza [mailto:[email protected]]
Sent: Wednesday, June 16, 1999 18:17
To: [email protected]
Subject: Problem with RpClean for Rep Development 3.0.L.0
Hello Forte Users :
We are running Forte 3.0.L.0 we previously upgraded from 3.0.J.1, 20
developer workspaces and a repository for both development and
deployment.
We are facing problems when we run an Rpclean for this Development
Repository, this process aborts with a fatal error message, the log
screen for this process issues the following messages
the deletion objects is made,
the repository compress is made,
the rebuild of the index is made,
but then when the process is creating back the repository it displays
"fatal error" and issues a message that it cannot truncate the .btx
file.
the command executed is :
rpclean -n Desarrollo -fr :/var/forte/repodesa -t /var/jaeb
Any experience on this regard?. If any, would be highly appreciated.
Jorge
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Problem with Mail For Exchange over Nokia E7-00 (a...

Hi, I have a problem with my nokia E7-00 (Symbian Anna).
Until recently it worked fine with my terminal synchronization with GMAIL via Mail For Exchange.
I synchronized the mail (including folders / labels I have on my account), address book and calendar.
Suddenly, this synchronization does not work anymore, the mail is no longer recovered, the calendar does not show appointments and contacts are no longer synchronized.
Trying to send an email that works perfectly, but the mail is not saved in Sent folder on my nokia e7-00, also if I search on the remote server is a contact I found it perfectly.
In practice it seems that something in the synchronization mechanism does not work.
Do you have ideas on how to fix this problem?
Thanks in advance.
MP

You may try rebooting the device to check if it works. If this did not help, you will have to re-setup outlook account on your device to get it worked.
Hope, this can resolve your issue.

Problems with License for Nokia Navigator

Similar Messages

Maybe you are looking for