Problems with license upgrade on AIP-SSM

Hi guys:
I have a problem with my AIP-SSM, recently I download the latest license and I need to install in my AIP but when I try to do this I receive this error:
"errSystemError-idsPackageMgr: digital signature of the update file was not valid, use CCO to replace corrupted file"
So I download the license again, because maybe was corrupted, but I receive the same error at the time I want to install it.
Does anybody knows what this error means?
Regards

It sounds like you are attempting to install a .lic license-key file via the Update Sensor section (which is used for software upgrades/updates instead). If you are trying to install a .lic license-key file, you can do that from IDM or IME's Configuration > Sensor Management > Licensing section. Ensure the Update From: option is set to License File, then click the Browse Local… button and locate/select the .lic license-key file on your local client machine. Finally, click the Update License button to upload and install the license-key file onto the sensor.
If you try to install a .lic license-key file via the Update Sensor section, then you will encounter the error message you noted.

Similar Messages

  • How to buy license? for AIP-SSM-10 ?

    Hi all
    how to buy license? for AIP-SSM-10 ?
    1. CON-SU1-AS1A1PK9 this is Cisco SMARTnet Support for AIP-SSM-10
    2. do I need smartnet for ASA ?
    3. what is part number of license ?
    ASA5510test# session 1
    Opening command session with slot 1.
    Connected to slot 1. Escape character sequence is 'CTRL-^X'.
    login: cisco
    Password:
    ***NOTICE***
    This product contains cryptographic features and is subject to United States
    and local country laws governing import, export, transfer and use. Delivery
    of Cisco cryptographic products does not imply third-party authority to import,
    export, distribute or use encryption. Importers, exporters, distributors and
    users are responsible for compliance with U.S. and local country laws. By using
    this product you agree to comply with applicable laws and regulations. If you
    are unable to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    ***LICENSE NOTICE***
    There is no license key installed on the SSM-IPS10.
    The system will continue to operate with the currently installed
    signature set.  A valid license must be obtained in order to apply
    signature updates.  Please go to http://www.cisco.com/go/license
    to obtain a new license or install a license.
    sensor#
    sensor# sh ver
    Application Partition:
    Cisco Intrusion Prevention System, Version 6.0(6)E3
    Host:
        Realm Keys          key1.0
    Signature Definition:
        Signature Update    S399.0                   2009-05-06
        Virus Update        V1.4                     2007-03-02
    OS Version:             2.4.30-IDS-smp-bigphys
    Platform:               ASA-SSM-10
    Serial Number:          ........
    No license present
    Sensor up-time is 21 min.
    Using 655507456 out of 1032499200 bytes of available memory (63% usage)
    application-data is using 39.7M out of 166.8M bytes of available disk space (25%
    usage)
    boot is using 37.6M out of 68.6M bytes of available disk space (58% usage)
    MainApp          N-NUBRA_2009_JUL_15_01_10_6_0_5_57   (Ipsbuild)   2009-07-15T01
    :15:08-0500   Running
    AnalysisEngine   N-NUBRA_2009_JUL_15_01_10_6_0_5_57   (Ipsbuild)   2009-07-15T01
    :15:08-0500   Running
    CLI              N-NUBRA_2009_JUL_15_01_10_6_0_5_57   (Ipsbuild)   2009-07-15T01
    :15:08-0500
    Upgrade History:
      IPS-K9-6.0-6-E3   17:48:06 UTC Wed Jul 15 2009
    Recovery Partition Version 1.1 - 6.0(6)E3
    sensor#

    Hi,
    CON-SU1-AS2A10K9 contract if for ASA+IPS bundle. If AIP-SSM-10 ws purchased as a spare the contract would be CON-SU1-ASIP10K9.
    I am not sure whether or not this Cisco Service for IPS contract can be  used to cover just the AIP-SSM-10 if it was purchased as part of a  Bundle instead of a Spare.
    I would recommend that you check with your Cisco reseller or Cisco  Sales Representative.
    Sourav

  • Problems with auto upgrade Anyconnect 3.1

    Hello,
    I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
    Here is the situation :
    I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
    Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
    If I configure client software back to 2.5 on ASA, it works again for every client.
    Do you have an idea ?
    Thanks for your reply.
    Yann

    I have seen the same behavior on Mac OS X. A couple of points for me:
    If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
    My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
    Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

  • Problem with license in SAP_NetWeaver701SR1_2008 TRial

    Hi there my friends,
    can someone help me here....i installed this trial in my virtual machine, but now i'm having problems with licensing it. I have requested license like it say's in the instalation, but i still can't login with BCUSER, only with SAP*...here are some screenshot's of the SLICENSE transaction.
    and then i got the file by email to install the license, it turned green (in the new licenses)...
    [Image - New Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/NewLicenses.jpg]
    [Image - Old Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/OldLicenses.jpg]
    and if i try to logon with bcuser after this i get this error
    [Image - Logon Error|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/LogonImpossible.jpg]
    can anyone please help me ? i have already many things done in that system
    kind regards,
    Ricardo Monteiro

    Hi Key,
    I have found a business objects Note 1198801.
    Please have a look to it.
    We can find Business objects Note/KBase from here
    [https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true#]
    For your reference have a look to content of that Note:-
    1198801 - Error: "Crystal Reports: Application Error - Couldn't load the keydecoder.dll" when attempting to start Crystal Reports XI
    Symptom
    When attempting to start Crystal Reports XI, the following error message appears:
    "Crystal Reports: Application Error - Couldn't load the keydecoder.dll".
    Cause :
    The error message occurs because the CommonFiles entry has the wrong path in the registry.
    Resolution :
    CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
    To resolve the error message
    Click Start > Run. The Run dialog box appears.
    Type "regedit" in the Open: text field. Click OK. The Registry Editor appears.
    Navigate to the following key: HKEY_LOCLAL_MACHINESOFTWAREBusiness ObjectsSuite 11.5Crystal Reports.
    Double-click the CommonFiles string. The Edit String dialog box appears.
    Ensure that the path points to the location of <installation directory>Common3.5 in.
    For example, the default location is the following: C:Program FilesBusiness ObjectsCommon3.5 in.
    Edit the path as necessary.
    Click OK. Close the Registry Editor.
    Crystal Reports starts successfully.
    Hope that helps!!
    Regards,
    Shweta

  • Problem with License server

    Hi All,
    I am facing problem with license server. We have installed SAP Business One , Did License import, Installed patch 15 and than again DTW and every thing. Now when I want to connect through DTW, it gives error messege : connection to license server failed . Any help on it will be highly appriciated. Thanks,
    Sabita

    Hi Sabita,
    Is it just the DTW that fails (ie can you log in to the SBO client)?
    In newer versions of the DTW, the License Server setting in the log in screen needs to have both the server name (or IP address) and port number. For example:
    MYSERVER:30000
    where MYSERVER is the name of the server where the license service is installed and 30000 is the port number it is running under (30000 is the default).
    Kind Regards,
    Owen

  • I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

    I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

    #1 Do a complete bootable backup of your drive before upgrading. That way should anything happen you can revert back to the start and try again.
    Make sure you meet Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
    You might also want to make sure you don't have software issues with SL:
    A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/

  • "Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product."

    Hi Guys!I am not it pro. but i need your HELP.Pls my microsoft Word and Excel starter were working fine, but after playing with my laptop, downloading , removing smth , i cannot open them proper anymore, cos this message comes up:
    “Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product.”What can i do to make it work fine back? plssss need Help! thank u i n advance!!!!!!

    I faced similar challenge. Re-installation did not solve the problem due to unsuccessful un-installation of ‘Microsoft Click to run 2010’. The following steps worked for me. Please use your discretion to try and see if it works for you too..
    1 Uninstall Microsoft office Starter 2010. If
    ‘MS click to run 2010’ doesn't get uninstalled use  Microsoft fix it tool meant for installing and uninstalling programmes, to uninstall the same.       
    2 Download ‘Microsoft Office Starter 2010’ from internet.      
    3 Before launching, right click the executable file and click the 'properties'. Go to
    ‘compatability’ tab and choose appropriate 'compatibility mode' as per your OS. Tick the check box to use admin privilege under
    privilege level section.
    4 Launch the executable to install Microsoft Office Starter 2010 afresh. It should go through four steps during installation now. Complete the steps and enjoy. Thanks !

  • Problem with license file...  ( Bad license file)

    i have upgraded to wl6.1 ( actually i still have wl6.0 running under c:\bea
    as well)... but having problems starting up the server..
    its complaining about there beinf an empty license file.. when i know there
    is a license file.. and i hhhave correctly run the UpdateLicense.cmd file tp
    upgrade it with details from the license_new.bea file.
    Here is the message when i run the server..
    C:\bea\wlserver6.1_beta>"C:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -cla
    sspath .;.\lib\weblogic_sp.jar;.\lib\weblogi
    c.jar -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver
    "-Dbea.home=C:\bea" "-Djava.security.policy==C:\bea\wlserver6.
    1_beta/lib/weblogic.policy" -Dweblogic.management.password= weblogic.Server
    <05-Jul-01 17:05:30 BST> <Info> <Security> <Getting boot password from
    user.>
    Enter password to boot WebLogic server:
    Bad license file
    problem: BEA license Is Not Present
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    Bad license file
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    Empty license file
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    C:\bea\wlserver6.1_beta>goto finish
    C:\bea\wlserver6.1_beta>cd config\mydomain
    C:\bea\wlserver6.1_beta\config\mydomain>ENDLOCAL

    Hi Suresh,
    You might want to post this onto the
    weblogic.developer.interest.61beta.general newsgroup. The XML developers who
    monitor this group don't know much about the license processor.
    Regards,
    -Todd
    Suresh Kumar <[email protected]> wrote in message
    news:3b4492da$[email protected]..
    i have upgraded to wl6.1 ( actually i still have wl6.0 running underc:\bea
    as well)... but having problems starting up the server..
    its complaining about there beinf an empty license file.. when i knowthere
    is a license file.. and i hhhave correctly run the UpdateLicense.cmd filetp
    upgrade it with details from the license_new.bea file.
    Here is the message when i run the server..
    C:\bea\wlserver6.1_beta>"C:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -cla
    sspath .;.\lib\weblogic_sp.jar;.\lib\weblogi
    c.jar -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver
    "-Dbea.home=C:\bea" "-Djava.security.policy==C:\bea\wlserver6.
    1_beta/lib/weblogic.policy" -Dweblogic.management.password=weblogic.Server
    <05-Jul-01 17:05:30 BST> <Info> <Security> <Getting boot password from
    user.>
    Enter password to boot WebLogic server:
    Bad license file
    problem: BEA license Is Not Present
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    problem: m_gpairs is null
    Bad license file
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    Empty license file
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    C:\bea\wlserver6.1_beta>goto finish
    C:\bea\wlserver6.1_beta>cd config\mydomain
    C:\bea\wlserver6.1_beta\config\mydomain>ENDLOCAL

  • Problems with RAM upgrade iMac G5 1.8GHz

    Stuck - Need Help!
    I've previously upgraded up iMac to 2 500Mb RAMs and felt recently that it needed that little bit extra, so I ordered two 1Gb chips from crucial.
    Followed instructions to T, but with the two new chips in, the machine won't load.
    Interestingly, it boots up with the following RAM combinations
    old 500MB + new 1GB (in any combination) - recognised as 1.5GB
    one new 1GB RAM (again either one) - recognised as 1GB
    I spoke to crucial who said that as the RAMs work individually, there isn't a problem with them, it could be a Firmware issue. I've upgraded all my software, and don't know what to do next?
    Anyone overcome a similar problem in the past?
    Thanks

    I'm experiencing something very similar to shaow. I'll share my experience in gory details - sorry for the long post but I've spent more hours trying to stabilize. I should have worked the hours at walmart and bought a new iMac with the money I could have earned
    Anyway, here goes:
    Two iMac G5 1.8Ghz 17" (both Fall 2005 model), will call one A and the other B.
    Prior to attempting ram upgrade: A, config working fine: both a config using 1GB slot 1, 256MB slot 2 and a single 1 PC3200 1GB stick. OS X 10.4-10.5.7. No problems. I did have the motherboard replaced under warranty after having sleep problems - capacitors were expanded. No problems since that motherboard swap.
    Prior to attempting ram upgrade: B, config working fine: 2 x 256MB sticks. OS X 10.3.9
    Ordered 3 PC3200 400Mhz 1GB sticks from Data Memory Systems.
    Upgraded A: Added 1GB stick = 2GB total
    Upgraded B: Removed both 256MB sticks from B and added two 1GB sticks = 2GB total
    Booted B, experienced gray screen of death with the multi-language crash message - somethign like: 'Please hold down the power button and restart'. Power cycled B, booted off a retail box DVD of OS X 10.5.6. Began upgrade to 10.5.6. Gray screen of death part way thru upgrade. Power cycled, gray screen of death again during early boot phase.
    Decided to run tests on B. I could not locate the Apple Hardware Test (neither on system dvd 1 nor on a separate DVD). I resorted to using TechnoTools Deluxe which was included with AppleCare box. No hardware problems found including on the 2GB memory.
    Removed both new 1GB sticks, pulled older working 1GB stick from A and installed into B. Completed upgrade with just 1GB memory on B to 10.5.6 and subsequently pulled down all updates for OS X 10.5.8. Powered down, added second 1GB stick to B, booted into 10.5.8 successfully. Repaired disk permissions, restarted. Began using applications, then after only about 5 minutes experienced gray screen of death. Powered down, removed new 1GB stick, replaced with one of the two remaining new 1GB sticks. Read about reseting PRAM/NVRAM. Followed steps to reset PRAM then decided to do the reset NVRAM within openfirmware. Started back up and logged into 10.5.8. Ran several applications - did not experience gray screen of death after about 20 minutes use. Have not had time for further tests on B yet.
    Back to my saga with A (my original iMac G5 that was working fine with 1GB stick on 10.5.7):
    Called Data Memory Systems and they sent me a replacement for the 'bad' 1GB stick.
    While I was waiting for the new 1GB stick from DMS, I was struggling to get machine fully updated. Software Updater was failing with the weird network error (network was fine) and after following steps to troubleshoot, I backed up the user accounts and decided to reinstall OS X fresh from the 10.5.6 retail box (family license). Finally, I had OS X 10.5.8 all fully updated on the 1GB iMac G5 (A).
    New memory arrived, installed 2nd 1GB stick. Booted up, immediately I got the gray screen of death. Restarted, booted up got about 5-15 minutes use then gray screen of death. Puzzled, I called DMS who said unlikely I got 2 bad sticks. They suggested I try memtest. So I did...
    So on A, I first ran memtest from single user mode on the 2GB config. It crashed immediately with some 'Unexpected' error. Did not look like a memory error. I powered down, removed 2nd 1GB stick, and ran memtest from single user on the 1GB stick. Ran all tests 3x over a couple hours - no problems found. Retested after swapping the 1GB stick for the other. Both tested fine. Installed both sticks again and ran memtest all tests, one pass (didn't want another 6 hours lost) on the 2GB config, and all tests passed. Booted up and got gray screen of death - I don't recall if it was on bootup or after running but I ran fsck with no disk problems found, then restarted, logged in, ran disk utility to repair all permissions. Some repairs were made. Restarted A, reset PRAM and NVRAM again, booted successfully.
    I haven't had much time to run extensively apps on A yet. It's sleeping as I type this on another mac. My next test will be to reset SMU.
    I'm starting to wonder if the original iMac G5 has firmware problems that would prevent it from being unstable with two 1GB sticks??? My experience on two identical models of iMac G5 plus reading this post with VERY similar behaviors and after all the normal tests. I've concluded the memory is A-OK and something more sinister is lurking...
    Any thoughts are appreciated.

  • Problems with Mavericks upgrade?

    Thinking about uprgrading to Mavericks, but have been coming across a lot of threads/reviews about people losing date and/or having real problems with the process. It's been a while since I've been here, and just wanted to ask for an opinion/advice.  I'm using Snow Leopard 10.6.8.  Should I stay away from it, or if I do, what advice/tips do you have for a smooth upgrade?
    OR -- is it possible to get Mountian Lion Somewhere?  I looked for it in the app store, but couldn't find it.  I heard some negative reviews about Lion, so I just kept Snow Leopard, rather than take any chances with a new OS.

    Mavericks is excellent on my MBP 8,2. Fast and flawless. Faster than Mountain Lion.
    New features I like: iBooks, iCloud keychain, enhanced dictation.
    A few things to consider:
    Any new OS has some bugs and incompatibilities with old software and hardware. If you are uncomfortable with basic Mac troubleshooting, then perhaps waiting would be a better strategy. I didn't have any problems, with installation or after.
    If you have any mission-critical software or peripherals, make sure they are compatible first. Check your apps for compatability here: RoaringApps - Application compatibility and feature support for OS X and iOS
    Mavericks does not play well with some old/bad software and hardware:
    Crapware: anything that purports to "clean", "monitor", "protect", or "accelerate"  your mac. Unnecessary on Macs and often harmful. Examples: CleanMyMac and MacKeeper (the King of Crapware).
    antivirus software. Unnecessary on Macs.
    WD hard drives.
    Before you install Mavericks:
    backup your old system, either with Time Machine, or better yet, a bootable backup.
    have enough RAM. The specs say 2GB, but 4 is probably a more realistic minimum.
    uninstall Crapware, antivirus software, and any other junk you don't need.
    repair your hard drive and permissions with Disk Utility
    boot into safe mode, and then run the installer Mac OS X: What is Safe Boot, Safe Mode?
    ML is available here: OS X Mountain Lion - Apple Store (U.S.)

  • Problems with Vista upgrade on Moduslink

    'COA invalid', 'Irrecoverable Error', 'Alert not Implemented'... these are kind of messages I get from Moduslink. I'm not expecting to reply my emails since they are in neck-deep.
    I love my A100 SAA9E, a very stable and powerful machine. I'm from London and have selected all the right options, but it would either come up with a random COA prob, or an error after my penultimate step.
    What can I do? Help.
    Shawn

    I was unable to complete the Vista upgrade via the Moduslink on Toshiba's website http://wwww.toshiba-europe.com/vista-upgrade, even though I got to paying for the upgrade with my credit card. When my payment was being processed I got an 'unrecoverable error', so I went back to repeat the process and this time the site didn't recognize my COA on the bottom of the laptop.
    I contacted Moduslink via the following Tel No. 00800 666 44 666 (UK) and spoke to one of their support staff (choose options 5 and then 8). There is a problem with their site excepting payments from credit or debit cards. The representative reset my COA, but it takes 48 hours for it to clear (so much from electronic data communications to servers). I have been told to retry the upgrade process again on Friday 16/02/2007, however, this time to pay either by wireless transfer from my bank or send a cheque.
    Hopefully, this will help others who were frustrated with the Vista upgrade debacle. It would be more appropriate however, if the company concerned, Modulink, resolved the issue in the 1st place. Firstly by informing their customers that there was an issue, secondly on a work around to the problem and finally fixing the problem. Will commonsense ever prevail?
    Ala (14/02/2007)
    Message was edited by: Ala_Jackson

  • I could not see how to continue after upgrade to firefox 4. This has never been a problem with ast upgrades. I am finding Firefox to be very user unfriendly for non-tech people.

    I am being told that my current version of firefox is no longer protected. When I tried to upgrade to firefox 4 some time ago, the menu bar(?) was gone--no bookmarks. I set my computer back to an earlier date to get my book marks back and have been afraid to attempt this upgrade again. Firefox also appears to have tried to do the upgrade automatically and says I have incompatible add-ons. I have never had problems with previous updates. I have read negative reviews of firefox 4 and am frankly afraid of it. I hate to leave firefox and am afraid of losing my book marks as well. I find the "Help" forums etc. here extremely difficult to navigate and they seem to be aimed at people who are more tech savy than many of us are.

    #Firefox 3.5.19 which you are using is no longer supported and is not being updated for any issues, including security problems.
    #The Menu Bar (File, Edit, View, History, Bookmarks, Tools, Help) was replaced in Firefox 4 by the "Firefox button" in the upper left corner
    #*You can turn the Menu Bar back on by doing one of the following in Firefox 4:
    #**click Firefox button, click Options, click Menu Bar to select it
    #**HOLD down the ALT key while pressing the keyboard letters VTM
    #**right-click on an empty space in the Navigation Toolbar, then click Menu Bar to select it.
    #Some information about Firefox 4 changes:
    #*https://www.mozilla.com/en-US/firefox/features/
    #*there is a link "watch the video" under '''''Improved Interface''''' on the above page
    #You can make Firefox 4 look more like prior versions: http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
    Your bookmarks should be safe during the upgrade; they are in a separate place on your hard drive. You should keep them backed-up in case of any problems with your system. See:
    *https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information#w_backing-up-your-profile
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Problem with PRD upgrade from 4.6C to ECC 6.0

    Hello,
    I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve.  First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD.  I was successful in getting through the uptime SAPup of our downtime minimized upgrade.  Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
    However, I did want to log into the Shadow instance to take a look at it.  I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error.  Session terminated".  Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute.  Error says:  Error when initializing the work area "SYST".
    Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
    Any assistance would be greatly appreciated.
    Thank you,
    Leeanna Travis

    Hello,
    I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve.  First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD.  I was successful in getting through the uptime SAPup of our downtime minimized upgrade.  Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
    However, I did want to log into the Shadow instance to take a look at it.  I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error.  Session terminated".  Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute.  Error says:  Error when initializing the work area "SYST".
    Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
    Any assistance would be greatly appreciated.
    Thank you,
    Leeanna Travis

  • TS1717 are there problems with iTunes upgrading from Vista to Windows 7?

    are ther problems upgrading iTunes from Vista to Windows 7?

    The best method is to use Windows Easy Transfer first to backup all your data, and do custom clean install. And install all your apps and drivers afterwards.
    Yes it should work. Make sure you are ready, and have all the latest drivers and applications ahead of time.
    There are some "gottchas" with the upgrade from Vista.

  • Problem with "License is expired"

    Hello guys,
    I've installed the trial version of Photoshop. Now I bought the software and thus I put in the serial on the box.
    Then I should agree to some License Agreements and so on and clicked "YES"... and the program suddenly was closed.
    When I tried to reopen it, only a window popped up with "License is expired".
    I already tried to run the LicenseRecovery by adobe.com (3 times) but it did not help.
    Isnt there any file on my PC that saves the activation or so?
    How can I fix the problem?

    Thanks for your quick answers.
    I meant the CD case by the word "box". Sorry, I forgot the proper word for it.
    And it is 100% the right serial. The problem is really with my PC (the files that Adobe created on it).
    This link: http://kb2.adobe.com/cps/494/cpsid_49485.html
    is pretty helpful. But unfortunately my OS is Vista and so I can't open my "Windows: \Program Files\Common Files\Adobe\Adobe PCD\pcd.db"
    because I do not have access to it. Does anyone know how I can delete this file?
    Edit: There is another problem: When I set the date to May 31, 2009 and open Photoshop, there are also just these License Agreements and when I agree, the window closes but nothing new opens.

Maybe you are looking for