Problems with parity and flow control using visa serial
I am trying to create a basic user interface with the options that my
company uses most often for a force indicator. You can configure
the indicator over serial, as well as read the values off the
indicator. I am trying to create the user interface so that using
producer/consumer loops with events, once you change a value, it will
write that new value to the serial port, ie the device.
The problem I am having is transfering the parity and flow control
values for the serial config to the Basic read write VI. The
problem is that once the consumer loop executes, it will write the
values correctly to the VI, but then the outer loop executes 200 ms
later and clears the values. I know that this is normal behavior
and that in order to keep the values stored, normally you would use a
shift register. I tried to use this and had some issues with
correct data types/array mis-mtaches, ets, so I created an indicator
and had a local vaible read the indicator, which seems to be working
for the stop bits, read bits, baud rate, etc, but not the parity anf
flow control. I always get "blank" outputs for theses values (if
you enable the digital display you can see that they are outputing the
value 0 which correspondes to None in both cases, which is
correct). Even though it appears that it is outputting the
correct value, I get an error that says the VISA property is
invalid. I initally did a search and found that my stop bit
control was wrong (outputting double instead of integer), but I could
not find anything on the parity/flow control issue. I even tried
to copy the serial config controls from the basic serial read/write to
my dialog box and that did not work either.
I would be grateful for any suggestions.
Thanks
Kenny
Kenny
Attachments:
BGI_main pandc.zip 232 KB
I should add that I am using LV 8.0 and that the serial config
indicator in the consumer loop will be off the frontpanel in the final
VI so that it is not visible to the user.
Kenny
Similar Messages
-
Problems with cursor and shortcuts when using JNLP services on MAC OS X
After invoking the JNLP services on a MAC I loose the ability to set the cursor and invoke keyboard shortcuts. On Windows this is not a problem, so I believe it is a bug and I have reported it to Apple. Meanwhile, I would appreciate if someone could help me with finding a work-around. To identify the problem run the following code with Java Web Start (i.e., you need to add the program to a jar and launch it using a JNLP script). You also need to include the javax.jnlp package.
Observe that the cursor changes to cross-hairs when entering the circle. After invoking the Open file menu item, the cursor does not change any longer. Shortcut key do not work either, but if you open the menu and close it again without selecting any of the menu items, the shortcuts are OK again.
package bugreport;
import java.awt.*;
import java.awt.event.*;
import java.io.IOException;
import javax.swing.*;
import javax.jnlp.*;
public class Demo2 extends JPanel implements Runnable, MouseMotionListener {
private int centerX = 100;
private int centerY = 100;
private int radius = 50;
public static void main(String[] args) {
SwingUtilities.invokeLater(new Demo2());
public void run() {
int menuMask = Toolkit.getDefaultToolkit().getMenuShortcutKeyMask();
final JFrame frame = new JFrame("Bug Demo");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setPreferredSize(new Dimension(200, 200));
addMouseMotionListener(this);
JMenuBar menuBar = new JMenuBar();
frame.setJMenuBar(menuBar);
//File menu
JMenu fileMenu = new JMenu("File");
fileMenu.setMnemonic('F');
menuBar.add(fileMenu);
//openMenuItem
JMenuItem openMenuItem = new JMenuItem("Open...");
openMenuItem.setMnemonic('O');
openMenuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_O, menuMask));
openMenuItem.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
openFile();
fileMenu.add(openMenuItem);
frame.add(this);
frame.pack();
frame.setResizable(false);
frame.setVisible(true);
@Override
public void paintComponent(Graphics g) {
g.clearRect(0, 0, getWidth(), getHeight());
g.setColor(Color.BLUE);
g.fillOval(centerX - radius, centerY - radius, 2 * radius, 2 * radius);
public void mouseDragged(MouseEvent e) {
public void mouseMoved(MouseEvent e) {
int dx = e.getX() - centerX;
int dy = e.getY() - centerY;
if (dx * dx + dy * dy < radius * radius) {
setCursor(Cursor.getPredefinedCursor(Cursor.CROSSHAIR_CURSOR));
} else {
setCursor(Cursor.getDefaultCursor());
private void openFile() {
FileOpenService fos = null;
try {
fos = (FileOpenService) ServiceManager.lookup("javax.jnlp.FileOpenService");
} catch (UnavailableServiceException ex) {
JOptionPane.showMessageDialog(this, "Service unavailable", "Open", JOptionPane.ERROR_MESSAGE);
if (fos != null) {
try {
FileContents fc = fos.openFileDialog(null, null);
} catch (IOException ex) {
JOptionPane.showMessageDialog(this, "Service unavailable", "Open", JOptionPane.ERROR_MESSAGE);
}Edited by: James_Vagabond on Oct 29, 2009 9:35 AMBarbara, Thanks very much taking the time to respond to my posting. Your input and directions were just what I needed.I accessed the print settings in the pull down menu, setup the print options including the color profile for Elements and the Printer to sRGB, and printed my picture. This resolved all the invalid color problems I was having, but I did notice that there was a hint of magenta overall in the picture. I had read an article that said to use Canon Color Matching instead of Color Sync to prevent that but I couldn't make that change in the pull down menu. I tried in the Presets dialog box but that didn't appear to be possible. Should I make that change as well?
Also, in my travels through Elements 13 I notice under Edit->Color Settings that there were options for No Color Mgmt, Optimize for Screen, for Printing, or ability to chose one or the other (real time I assume). How do those options fit into this scenario?
Thanks again -
Problems with validation and flow
Hi
My JSF experience is limited, so please bear with me. Apologies in advance for any incorrect terminology, etc.
Outset:
We have a simple app that creates and updates fields mapped to a request scoped managed bean.
The same .jsp is used for both create and update use-cases. We distinguish between a create and update action by using an inputHidden tag with value="#{entity.id}". The inputHidden tag also has a rendered="#{entity.id ne null}" property defined. The page submits via the use of a commandButton:
<h:commandButton action="#{entity.createEntity}" value="Save"/>We determine weather or not to create or update the entity within the createEntity() method, depending on weather or not the inputHidden tag was rendered:
final boolean isAltEditMode = getRequestParameterMap().containsKey("formName:id");
if(isAltEditMode) {
entity.setId(Long.parseLong(getRequestParameterMap().get("formName:id")));
The catch:
We are using JSF validation. If a blank field is entered on a required field during an "update", JSF interrupts the flow by forwarding back to the create page, and displaying the relevant error message. However, it loses the formName:id value (i.e. no value is bound to the requestParameterMap), and the app loses it's handle to the entity being updated.
Tested workarounds
We have successfully split the site model into separate create and edit screens. Validation errors using this model do pass on the entity id, but we would prefer to stick to the one-page-per-entity model described above.
We have also tried removing the rendered="#{entity.id ne null}" constraint on the hidden field. This fails on an entity create, as a blank hidden field always translates to a 0 (zero) id value, and the same entity id thus always gets created.
Question
We believe our understanding here is letting us down. There must be a better way to persist entity data for updates. Can anyone shed more light on the issue?
We'd be appreciative of any help.
Thanks,
SV> Why does dreamweaver use "embed" when it shouldn't be
used with xhtml?
Because that's the only way to make Flash work on all
browsers reliably.
> How do I fix this?
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2, the fix is already built
into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"PatrikI" <[email protected]> wrote in
message
news:f5dsr3$5r0$[email protected]..
>I don't understand...
>
> I've built the page using fireworks and dreamweaver cs3.
> I've inserted a flashmedia by using insert-media-flash
and on some pages
> flashbuttons. It works fine in a browser (checked with
IE7 and NS9). But
> when I
> use validate in dreamweaver I get errors that says
something like the tag
> with
> the name "embed" can't be found in (something)
versions.[XHTML 1.0
> transitional].
>
> Why does dreamweaver use "embed" when it shouldn't be
used with xhtml? How
> do
> I fix this?
>
> Please help?
>
>
> Site address:
http://www.forsakringscenter.se
> -
Problems with scrolling and Mission Control
I have this problem:
When scrolling down any page, the letters will blur at the top of the screen and not the bottom.
When swiping acrross pages in the launchpad, it occasionaly freezes half way between the two.
When I swipe up with four fingers to access mission control, the screen becomes very sluggish. Swiping back down (or clicking a tab) is even worse, causing slow "laggy" animations.
And this the report from EtreCheck:
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 0:3:16
Disk Information:
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (309.44 GB free)
HL-DT-ST DVDRW GS41N
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 1
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded] com.bose.soundtouch.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Spotify
BitTorrent
Autodesk 360
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
AdobePDFViewer: Version: 10.0.0 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
2% WindowServer
2% SoundTouch music server
0% fontd
0% BitTorrent
0% mds
Top Processes by Memory:
90 MB mds_stores
86 MB Safari
78 MB Spotify
57 MB Spotify Helper
49 MB ocspd
Virtual Memory Information:
1.83 GB Free RAM
1.44 GB Active RAM
190 MB Inactive RAM
558 MB Wired RAM
303 MB Page-ins
0 B Page-outsI have this problem:
When scrolling down any page, the letters will blur at the top of the screen and not the bottom.
When swiping acrross pages in the launchpad, it occasionaly freezes half way between the two.
When I swipe up with four fingers to access mission control, the screen becomes very sluggish. Swiping back down (or clicking a tab) is even worse, causing slow "laggy" animations.
And this the report from EtreCheck:
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 0:3:16
Disk Information:
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (309.44 GB free)
HL-DT-ST DVDRW GS41N
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 1
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded] com.bose.soundtouch.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Spotify
BitTorrent
Autodesk 360
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
AdobePDFViewer: Version: 10.0.0 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
2% WindowServer
2% SoundTouch music server
0% fontd
0% BitTorrent
0% mds
Top Processes by Memory:
90 MB mds_stores
86 MB Safari
78 MB Spotify
57 MB Spotify Helper
49 MB ocspd
Virtual Memory Information:
1.83 GB Free RAM
1.44 GB Active RAM
190 MB Inactive RAM
558 MB Wired RAM
303 MB Page-ins
0 B Page-outs -
Problem with tooltips and spry data using startLoadInterval
I am trying to use tooltips with a dynamic table using the spry data example at the bottom of the page:
http://labs.adobe.com/technologies/spry/articles/tooltip_overview/index.html
I have it working except that it appears to have a memory leak as firefox's memory usage continues to grow.
I did notice there is a 'new' inside the onPostUpdate:function that is being called on every table update.
So after looking at the tooltip code I modified the function to:
<script type="text/javascript">
var tt1;
var observer = {onPostUpdate:function(){if(tt1 == null){tt1 = new Spry.Widget.Tooltip('tooltip','.trigger');}else{tt1.destroy(); tt1.destroy();if(tt1.checkDestroyed()) alert("destroyed");else alert("not destroyed");delete tt1; tt1 = new Spry.Widget.Tooltip('tooltip','.trigger');}}}
Spry.Data.Region.addObserver('mainRegion', observer);
</script>
The tt1.checkDestroyed() always returns false and my memory usage continues to grow.
Any help?Thanks for the reply. I found a way to get it to work by changing my
observer function to the following:
else{tt1.destroy();
tt1.init('.trigger', 'tooltip',
{});tt1.attachBehaviors();Spry.Widget.Tooltip.loadQueue.push(tt1);}}
Probably not very clean but it doesnt grow memory and works correctly.
I just put it back to the old way as in the example with a
startLoadInterval(1500) :
And I am over 500MB after ~ 30 minutes where as the top code above ran with
a startLoadInterval(1500); overnight and is about ~120MB.
I am using a double repeatchildren loop to build a table with tooltips for
each cell which may affect it.
Bottom line is I have a way to make it work so I am moving forward. If you
still want to see it I might be able to get it up on the internet and give
you a link.
Thanks,
Greg Wirth -
Problem with freezing and volume control PLZ HELP
every time i go into my volme and ringtones and blackberry messenger settings and it just freezes and the only solution is to take out the battery,
i can not get my volume changed or turned of my company that i deal with is telus i have no volume on my phone what so ever
-
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter -
Problem with writing and reading using serialization
I am having a problem with writing and reading an object that has another object in it. The purpose of the class is to write a order that has multiple items in it. And there will be several orders. This is for an IB project, where one of the requirements is to utilize a hierarchical composite data structure. That is, it is "one that contains more than one element and at least one of the elements is a composite data structure. Examples are, an array or linked list of records, a record that has one field that is another record, or an array". The code is shown below:
The error produced is
java.lang.NullPointerException
at SamsonRubberIndustries.CustomerOrderDetails.createCustOrdDetailsScreen(CustomerOrderDetails.java:150)
at SamsonRubberIndustries.CustomerOrderDetails$1.run(CustomerOrderDetails.java:78)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
public class CustOrdObject implements Serializable {
public int CustID;
public int CustOrderID;
public Object OrderDate;
public InnerCustOrdObject[] innerCustOrdObj;
public float GrandTotal;
public int MaxItems;
public CustOrdObject() {}
public CustOrdObject(InnerCustOrdObject[] innerCustOrdObj,
int CustID, int CustOrderID, Object OrderDate,
float GrandTotal, int innerarrlength, int innerarrpos, int MaxItems) {
this.CustID = CustID;
this.CustOrderID = CustOrderID;
this.OrderDate = OrderDate;
this.GrandTotal = GrandTotal;
this.MaxItems = MaxItems;
this.innerCustOrdObj = new InnerCustOrdObject[MaxItems];
public InnerCustOrdObject[] getInnerCustOrdObj() {
return innerCustOrdObj;
public void setInnerCustOrdObj(InnerCustOrdObject[] innerCustOrdObj) {
this.innerCustOrdObj = innerCustOrdObj;
public int getCustID() {
return CustID;
public void setCustID(int custID) {
CustID = custID;
public int getCustOrderID() {
return CustOrderID;
public void setCustOrderID(int custOrderID) {
CustOrderID = custOrderID;
public Object getOrderDate() {
return OrderDate;
public void setOrderDate(Object orderDate) {
OrderDate = orderDate;
public void setGrandTotal(float grandTotal) {
GrandTotal = grandTotal;
public float getGrandTotal() {
return GrandTotal;
public int getMaxItems() {
return MaxItems;
public void setMaxItems(int maxItems) {
MaxItems = maxItems;
public class InnerCustOrdObject implements Serializable{
public int ItemNumber;
public float UnitPrice;
public int QuantityRequired;
public float TotalPrice;
public InnerCustOrdObject() {}
public InnerCustOrdObject(int ItemNumber, float
UnitPrice, int QuantityRequired, float TotalPrice){
this.ItemNumber = ItemNumber;
this.UnitPrice = UnitPrice;
this.QuantityRequired = QuantityRequired;
this.TotalPrice = TotalPrice;
public int getItemNumber() {
return ItemNumber;
public void setItemNumber(int itemNumber) {
ItemNumber = itemNumber;
public int getQuantityRequired() {
return QuantityRequired;
public void setQuantityRequired(int quantityRequired) {
QuantityRequired = quantityRequired;
public float getTotalPrice() {
return TotalPrice;
public void setTotalPrice(float totalPrice) {
TotalPrice = totalPrice;
public float getUnitPrice() {
return UnitPrice;
public void setUnitPrice(float unitPrice) {
UnitPrice = unitPrice;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.table.DefaultTableModel;
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems;
private static boolean FileExists, recFileExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.dat");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord-1);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
//TotPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++CurrentRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
setInnerFieldText(currentItem);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
//readOrder();
setInnerFieldText(currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
writeRecordNumber(MaxRecord);
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
currentItem++;
setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
System.err.println("currentItem" + currentItem);
getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07
Message was edited by:
Kilik07ok i got reading to work to a certain extent... but the prob is i cnt seem to save my innerCustOrdObj proprly...when ever i look for a record using the gotorecordbtn, the outerobject, which is the orderDetails, seems to change but the innerCustOrdObj remains the same... heres the new code..
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems = 1;
private static boolean FileExists, recFileExists;
private static boolean RecordExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.ser");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
//CurrentRecord--;
//System.out.println("Current Rec Here"+CurrentRecord);
if(orderDetails[CurrentRecord] == null){
System.err.println("CustomerOrderObj 1 is null !!");
}else{
System.err.println("CustomerOrderObj 1 is not null !!");
if(orderDetails[CurrentRecord].getInnerCustOrdObj() == null){
System.err.println("InnerCustomerOrderObj is null !!");
}else{
System.err.println("InnerCustomerOrderObj is not null !!");
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord);
getInnerFieldText(MaxItems);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
//CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
TotPriceTxt.setEditable(false);
TotPriceTxt.addFocusListener(new FocusAdapter(){
public void focusGained(FocusEvent evt){
TotPriceTxt.setText(""+Integer.parseInt(UnitPriceTxt.getText())*Integer.parseInt(QuantityReqTxt.getText()));
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println("Current Record " + CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
CurrentRecord = MaxRecord;
orderDetails[CurrentRecord] = new CustOrdObject();
writeRecordNumber(MaxRecord);
MaxItems = 1;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
setInnerFieldText(MaxItems);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
MaxItems++;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
System.out.println("Max Items "+MaxItems);
currentItem = MaxItems;
orderDetails[CurrentRecord].setMaxItems(MaxItems);
///setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
gotorecordbtn = new JButton("Go To Record", createGotoButtonIcon());
gotorecordbtn.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt){
* The text from the GotorecordTxt textfield will be taken and assigned
* to a temporary integer variable called Find.
int Find = Integer.parseInt(CustOrderIDTxt.getText());
for(int j=1; j <= MaxRecord; j++){
* Using a for loop, each record can be read using the readCustRecord
* method.
getFieldText(j);
* An if condition is utilized to check whether the temporary stored variable, Find,
* matches a field in a record. If this record is found, then using the RecordExists
* which was declared at the top, either a true or false statement can be assigned
* If the record exists, then a true statement will be assigned, if not a false
* statement will be assigned.
if(orderDetails[j].getCustOrderID() == Find){
RecordExists = true;
break;
}else{
RecordExists = false;
if(RecordExists == false){
* If the RecordExists is assigned a false statement, then a message will be
* displayed to show that the record does not exist.
JOptionPane.showMessageDialog(null, "Record Does Not Exist!", "Error Message", JOptionPane.ERROR_MESSAGE, createErrorIcon());
}else{
getFieldText(Find);
buttonpanel.add(gotorecordbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setMaxItems(MaxItems);
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
orderDetails[orderID].getInnerCustOrdObj();
System.err.println("currentItem" + currentItem);
//getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
/* System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());*/
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07 -
I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloudfherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process. -
I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.
What is your brightness setting & how many apps are open?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
Bad Request - Request Too Long
HTTP Error 400. The size of the request headers is too long.
From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
I tried to disable the viewstate for one page and the server got the request correctly.
I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.Sometimes that means that the page address sent is loo long.
Check the link address you are using.
I can't help you further and will send for more help. -
Problem with wpa and hidden ssid
hi,
I have a powerbook g4 (1,67ghz). i am having trouble connecting to a netgear router mr814 v3 if i use wpa and hidden ssid, i get a message, that the router would not support wpa!
there is no problem with wep and hidden ssid or wpa with no hidden ssid.
is also have no problems with wpa and hidden ssid with an ibook.
the problems occur only with the powerbook with os x 10.3.9 as well as 10.4.2. even after the recent airport update, no change.
thanks for the help,
benI would use WPA and broadcast your SSID.
It use to be useful, but closing your Airport or wireless network (sometimes referred to as not broadcasting your SSID) is really no longer a real option when it comes to wireless security.
Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
WPA is your friend if you value wireless security.
My recommendation is not to worry about broadcasting your SSID but use WPA. This will be more secure than a closed WEP encrypted network. Closing your network makes it very difficult for neighbouring networks to see which channels are free thus causing potential interference problems.
Another thing to consider is that a closed network is still broadcasting and therefore is detectable (regardless of whether it is broadcasting a SSID). If someone was determined to hack into your network, then not broadcasting your SSID and MAC address access control is not going to stop them.
WPA is virtually uncrackable (only really vunerable to a dictionary attack if a real word is used as a password) and therefore will stop the casual user and the determined hacker. -
problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions. -
I'm having a problem with coreaudiotoolbox and corevideo.dll.
I'm having a problem with coreaudiotoolbox and corevideo.dll. PC was corrupted, I restored. Now when I launch Safari, I run into errors, can't find these two dll files. Itunes won't download at all because it says something is missing but won't say what. Now what do I do? Apple won't help because they want $50 dollars just to talk with me and I've been down that road before and to no satisfaction. Help please!!
Taken at face value, you're having trouble with Apple Application Support program files there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept, so an AAS problem can affect both iTunes and Safari.)
Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post (although it's for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh... -
Problem with DAQmx and Real Time PCI-7041/6040E.
Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM
Maybe you are looking for
-
Cannot read foreign characters!!!
Requirement: Read a text file containing foreign characters and print it/ store it in string buffer Problems: Doesnt work, and throws exception whenever Reader.read() or BufferedReader.readline() method is envoked... How do i get arround this? Here i
-
XML Validation : isschemavalid always returns 0
Hello XML folks, I have registered the schema and tried to validate. It always returns 0 (i.e invalid). Could you please let me know what is wrong with XSD or XML Thanks, Parappa SQL> DECLARE 2 doc varchar2(3800) := 3 '<?xml version="1.0" encoding="U
-
Hi Experts Clarification on Intercompany STO return order process. To reverse the Intercompany STO, if i use the Return to Vendor through the MIGO, anyway a delivery can be created against this RTV (MIGO) and perform a Goods Reciept ? A flow could be
-
IF SD is core module and if we want to Integrate with MM,FI and other mdls
Hi SD is our core module and if i have to test SD module with other module like FI,HR etc how do we do that
-
I m SQL / PLSQL developer Are thr any courses in oracle cloud which can be helpful to me ? How we can relate SQL / PLSQL and cloud computing ?