Problems with remoting upon upgrade to Flash 8

I have had a fully functional flash remoting page with Flash
MX 2004.
I recently upgraded to Flash 8 (behind the times I know)
When I modified the Flash slightly the page stopped working.
Flash 8 could not locate my NetServices.as file or NetDebug
file when I test my movie.
The error message I get is as follows:
include file NetServices.as: File not found.
#include "NetServices.as"
include file NetDebug.as: File not found.
#include "NetDebug.as"
Following the advice else where in these forums I have
changed the
#include "NetServices.as"
to
import mx.remoting.*;
and
#include "NetDebug.as"
to
import mx.remoting.debug.*;
however both generate a syntax error when I try to test the
movie.
Any suggestions would be appreciated.

Call me a dummy
that was exactly the issue and I'd been looking for
something more complicated
However I am now having some problems converting what had
been a fully functional action script file called DataGlue.as into
a compatible format.
Any suggestions where I can go to find advice about
converting across?

Similar Messages

Problems with Remote App on iOS 4?

I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
Are there any known problems with iOS 4 and Apple TV?

Chenks wrote:
maybe for you, but isn't for me.
i have the remote app on my iphone4 and it's connected to 2 appletv's.
i don't experience any dropping of connection etc.
May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

Doh! Rectified flash!
But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

Problem with internal HD upgrade- Flashing "?" over HD icon on startup

Last weekend, I installed a Western Digital 250GB internal IDE 2.5 inch drive (WD2500BEVE) to replace the internal HD on my 15 inch G4 PB Aluminium (not sure of processor speed, but purchased new in 2004, with OSX 10.4.11). I backed up my existing HD to my friend's MacBook, as a disk image using Carbon Copy Cloner. I was very careful with the installation (using anti-static wristband etc etc). The installation appeared to go well. The newly installed internal HD could be mounted as an external HD of my friend's MacBook (using firewire Target Disk mode). Carbon Copy Cloner copied everything back to the new internal HD without any apparent problems.
BUT THEN... when I disconnected the firewire connection and tried to start my computer on its own, the dreaded 'flashing question mark over hard drive' icon appeared.
Can anyone suggest what the problem might be? Three things I've already excluded are:
(1) The jumper settings on the HD are correct.
(2) I formatted the new HD as Mac OS extended (journaled)
(3) The problem is not with the master boot sector (i.e. the problem is not merely that the computer can see the HD but does not know how to load the system from it). My computer cannot see the HD at all -- when I insert my operating system DVDs as if to reinstall the system, my internal HD does not even appear.
I am not panicking as I can still view the contents of my internal HD by booting it as an external HD of my friend's computer. But there seems to be a problem with my CPU communicating with my internal HD. The core of the mystery is: why can I boot my new internal HD off my friend's computer using FireWire, yet when I start my computer on its own using the operating system DVDs, the computer doesn't seem to recognise the HD whatsoever?
Does anyone have any suggestions?

Can we establish what model Powerbook you have? Take the battery out and look for the label.
I have a feeling that your PB cannot recognize the 250GB drive, although I was under the impression that the older PBs that could only recognize 128GB would simply ignore the extra disk space. Perhaps the ATA specs aren't all backward compatible, although the Firewire interface can handle it.
Other World Computing can obtusely point out which drives your model can handle, although I don't know it its 100% accurate.
http://eshop.macsales.com/MyOWC/

Problem with permissions when upgrading to Yosemite...

I have twice tried to upgrade to Yosemite with the same results each time. Once the installation completes and it goes through the final reboot to start the system, immediately upon start-up, it shows a dialogue box that says something along the lines of, "Yosemite needs to repair your Library." I do authorize it to do a repair, but it seems nothing actually happens.
Yet another problem is also immediately evident at startup, and that is that several of my folders are irrevocably locked..."I don't have permission." This includes folders in my User Library, a folder on my Desktop which is vital to my work, and the Downloads folder. If I try to go to the Get Info area to unlock it, in the Permissions area it says "Fetching", to see who has permissions, but it never stops Fetching. And if I click on the "+" to add a user permission, it hangs and necessitates a hard restart.
Also, when opening Safari, it can't find Safari's keychain or can't access it, and it asks me to reset to default settings.
I'm thinking this all has to do with a bug in the Permissions, but I don't know where the bug is or how to address it. I have gone back to Mavericks twice now, and I don't see any problems with the permissions on the Downloads file, for instance. Also, it seems entirely random as to which files are locked and which aren't, which adds to the confusion.
Any help would be appreciated.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Problems with Memory on upgrading

Problems with Memory. I Dide not hace space to upgrade. Now i do, but It still cancels for lack of space

Actually, your problem does not sound like memory, but hard drive space. By default, you lose 10% of your drive to the OS and formatting. To tell how much hard drive space you have go to:
>Finder
>At the bottom of finder in the gray bar it will tell you how much space you have available on your hard drive.
Your hard drive should be no more than 85% full! If it is, delete, get a larger hard drive, remove items to an external drive.
GarageBand only needs 1.2 MB of space.
In order to use GarageBand, some additional content is required. If you do not already have the content installed, it must be downloaded.
Make more disk space available by moving some of your files to a different disk (such as an external hard disk or a USB flash drive), or by deleting files you don't need and then emptying the Trash

Problems with remote app solution suggestion!

Hello,
I have been trying to get the Remote app to work on my windows 8 PC, but to no result. I am using an iPhone 5S. I believe the problem is that my PC is a desktop connected to the internet via ethernet. This is a very common issue. I spent around 5 hours on the phone with apple support, but all I got from them was a very long conversation. Even the senior support supervisor could not help me. Many people use iTunes on PCs that are connected via ethernet and they are unable to use the Remote app because it lacks a very basic and simple feature: to enter the host IP manually. When a PC is connected via ethernet to a router rather than wirelessly it cannot be found by the iPhone as a device that exists in the network, so you need to find it manually. Hopefully some of the higher-ups will hear this simplest of ideas and implement it, so the remote app no longer gets 1 or 2 star reviews saying it does not work.

Welcome to the Apple Community Johnson4o.
That's not correct, homesharing works over wired, wireless and mixed. If you have enabled homesharing correctly on both devices, then there' same problem with your network or settings, there is no need to add manual IP's, in fact there is nowhere to do so.

Problem with Firefox 10.0.2, Flash Player 11.1.102.62 and allowedHTMLdomains.txt

Hi all,
I have a Flash Media Streaming Server 4.0 running for more than a year now.
I protect the access to my server through the "allowedHTMLdomains.txt and allowedSWFdomains.txt feature" (amongst other things...).
We noticed that with Firefox 10.0.2 (last version) and Flash Player 11.1.102.62 (last version) our customers can't connect anymore.
In the admin console we can read things like :
     Authentication failed for pageurl: http://my.domain.com, rejecting connection from XXX.XXXXXX.XXX
If i try from the same computer with another browser, i get
Accepted a connection from IP:XXX.XXX.XXX.XXX, referrer: http://my.domain.com/myPlayer.swf, pageurl: http://my.domain.com/myWebPage.php
In the logs i have lines like that :
     --> connection error :
connect
session
2012-03-01
12:51:17
CET
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
6629
2
19
_defaultRoot_
_defaultVHost_
vod
_definst_
0
401
XXX.XXX.XXX.XXX
rtmpte(HTTP-1.1)
2
rtmpte://my.streamer.com/vod
rtmpte://my.streamer.com/vod
http://my.domain.com/myPlayer.swf
WIN 11,1,102,62
4702112566065840495
3073
3106
normal
http://my.domain.com/myWebPage.php
     --> connection successful:
connect
session
2012-03-01
14:31:20
CET
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
6629
2
19
_defaultRoot_
_defaultVHost_
vod
_definst_
0
200
XXX.XXX.XXX.XXX
rtmpte(HTTP-1.1)
2
rtmpte://my.streamer.com/vod
rtmpte://my.streamer.com/vod
http://my.domain.com/myPlayer.swf
WIN 11,1,102,62
4702113665527136624
3073
3073
normal
http://my.domain.com/myWebPage.php
I can't find any significant difference...
I didn't change anything in my configuration since the beginning, and the application was working without probleme with every version of Browser/FlashPlayer untill now.
I suppose this is a bug, from Firefox or FlashPLayer or FlashMediaServer.
Is there anyone from Adobe that could help me to solve this or "workaround" this, knowing that i must use the security features.
Thank you very much for your help!
Sam

Ok for the timeline.
For your workaround : it was already the case : i had only domains in my allowedDomains.
I'll have to turn off this feature, and after the update of the flash player, hope that not too many people will stuck to the old flash player version...
Thx for your help anyway!

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

I Phone 4 - problem with bluetooth after upgrading to ios 4.2.1

Since I have upgraded the software on my I phone 4, I have noticed a problem with my hands free kit in my car using bluetooth. When I make a call the sound comes through the system ok, but if I dial to voicemail the sound doesn’t come through. I never had this problem prior to the upgrade. Any suggestions?

At least there is a way! only problem by doing this is, on the vodafone network you have to input your phone number followed by a pin every time if you access using +447836 121 121. The short key 121 is the way forward! Will this be fixed? is there a way of taking the I phone 4 back to previous version of software?

Problems with mail after upgrading to Mavericks

Hello,
since I upgraded to Mavericks, I have problems with Mail.
The mail app doesn't retrieve any mail from my email servers. IMAP or POP or exchange mail no longer work.
I have these problems on my iMac and my MBP.
The strangest thing is that I have no more new emails in my icloud account since the upgrade. Not only does mail not retrieve the emails but I even can't see any new mail online.
On my iphone with iOs7 the mails are retrieved, except of course the mails from the icloud account.
Has anybody a solution at hand?
Thanks

this might help with the gmail problem: http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/?viewall=true

Problem with netflix after upgrading to firefox 6

now that I have upgraded to firefox 6 I can't instant watch netflix anymore. please help I'd rather not have to use a different browser to do this.

'''SOLUTION'''
The problem with Netflix streaming with the FireFox 6.0 version is that the Netflix service '''refuses '''version 6.0 because they are A) unwilling to license it '''''or''''' B) too lazy or stupid to add the new version to their User Agent acceptance scheme. C) under contract to MICROSOFT to use Silverlight and part of Silverlight's DRM is what Browser versions are acceptable and Microsoft is taking their sweet time updating Silverlight to push I.E. on people and if you have Beta 5 Silverlight forget that -------Until Netflix accepts Firefox 6.0 as a legitimate Netflix browser '''you may do what I have done to get Firefox 6.0 streaming at Netflix.'''
1) Open Firefox 6.0 and enter "www.whatsmyua.com" without quotations in the address bar and highlight and copy your present User Agent string from the top of that page when you get there.
2) Type "ABOUT:CONFIG" without quotations in the Firefox address bar and hit enter then answer the You might destroy the world question with Alright I'm ready.
3) Right click on the background of the Config screen and then highlight to click on the "New String" choice... When the box comes up enter "general.useragent.override" without quotations and hit return
4) When another box appears paste in your current User Agent string you copied in step 1) BEFORE hitting enter place your cursor on your paste and right arrow to the end of the line. EDIT/REPLACE "6.0" with "5.0.1" without the quotations. Enter your change and close out the Config page.
5) Repeat step 1) to make sure the User Agent string is now spoofing your browser as version 5.0.1
6) Go to Netflix and watch movies (Make sure Silverlight and the Firefox Java are on). If it was working before the upgrade, everything should now work again streaming Netflix with Firefox 6.0.
7) Call Netflix and tell them Dave sent you to see if they're stupid or just lazy and to quit spreading the B.S. that Firefox 6.0 ain't workin when we know it's Netflix (1-866-636-3076)

Problem with contacts after upgrading to iOS 7 (iphone 5)

After upgrading to iOS 7 (iphone 5), the contacts (loaded from icloud) in greek language aren't sorted!!! They are under the # symbol!! Anyone has a solution. I didnt have this problem with previous iOS versions!!!!

My phone was fine after I connected to iTunes. It appeared in recovery mode and then it downloaded the update, installed and all was fine.
Regards,
Jeevan.

Problems with plugins after upgrading to win8

Hi
I made the upgrade to Windows 8 and now several PS plugins causes Photoshop CS6 to "Stop Working And need to close". I have uninstalled
and reinstalled plugins and still the same problem. As this happens with different plugins from different vendors I am led to believe this is
not a 3rd party problem, but rather a problem with PS in win8. Happens with plugins from Niksoft and RedGiant. Needless to say I have
all the latest software and updates - legally purchased.
I haven't done much research into this, posting here is my first step after googeling didn't help. Is this a common problem? Does anyone
know a fix to this? It's of such importance that I am already considering reinstalling win7.

As an update on this,
After I installed the latest Windows Update system fix packages that were released today most of the plugins now work. I am not 100% sure I can credit MS with fixing this, as I fiddled with alot with my graphics card trying to make this work at the same time as I updated. I will have to do some more testing on this to able to say exactly what was the problem.
I'm installing win7+ps on a virtual machine so I can use that when absolutely needed for the plugins still not working - guess I can live with that until certain 3rd party vendors sort things out.
Allright Noel, I get your point - but you have to be downright difficult to be reading my initial question as if I was seeking support on 3rd party software as such.

Problems with remoting upon upgrade to Flash 8

Similar Messages

Maybe you are looking for