Problems with SAPGUI 7.20 for Windows

In our organization we have newly installed SAP GUI 7.20 for Windows. But the users are getting error message, when they run some of the transactions.
For example if they run the transaction FD10N it give a error message:
Runtime Errors MESSAGE_TYPE_X
Termination occurred in the ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLUSH".
The main program was "RCOPCA02 ".
In the source code you have the termination point in line 29
of the (Include) program "LOLEAU02".
Any clue about why this is happning and how this can be fixed?
Thanks in advanced!

Have you checked SAP Notes for supported Windows version? Which version of Windows are you running? If you completely remove all of the SAP GUI pieces and re-install SAP GUI 7.20, does the problem still occur? Let's hope for installation error...I don't see any SAP Note specifically for these LOLEA failures with 7.20 version...

Similar Messages

Problem with Lenovo Solution Center for Windows 8.1

Hi,
I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
(I installed it with the necessary administrator priviledges.)
But it didn't work.
I am getting the following error message.
Can anyone help me with this problem. Thanks in advance.
Best regards,
Jens.

This one?
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
Cheers.
If I helped you, please give me some kudos! ^^

Problems with reinstalling Office 2010 for windows 7

So, I had Office 2010 installed on my PC. Then for some problems with other programs, I had to format my PC. Then, I opened Microsoft Office 2010 to reinstall it, then I inserted the product key I've written on a sheet, and it gave me error: the product
key doesn't exist. So I tried using WindowsKeyFinder, which found another product key - that one didn't work neither. What might the problems be? Thanks for anyone who will answer this question.

Hi,
Please first make sure whether you've inserted the correct product key. For how to find your Product Key for Office 2010, please refer to this article:
https://support.office.com/en-ca/article/Find-your-Product-Key-for-Office-2010-1e8ef39c-2bd4-4581-a0ae-5cf25ebed489
Also, have you ever made changes to your hardware? If your hardware is substantially different, then it will be considered as a new computer. If this is the case, you might need to
activate your Office 2010 via telephone.
If issue persists, I would suggest you contact Microsoft Custom Service directly for further assistance:
http://support.microsoft.com/en-us/gp/customer-service-phone-numbers
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Problem with Updated Webcam Software for Windows 7 (I AM NOT USING THE BETA VERSION OF WINDOWS 7)

I have a dv5-1235dx. HP posted new software for Win 7 (64) built in camera software. The install seemed to go fine, but once you click to run the software, nothing happens, so it seems. About a minute or so later, the application opens. Why is it taking so long to open. I have uninstalled/reinstalled multiple times and the problem still exist. I have tried to go back to the old vista version of the software (running in cap mode), but now that software takes a long time to load. I have done a restore, with no affect. What happened? Note: I am using the full retail version, not a beta of Win 7 Ultimate. None of the other Updated HP software has this problem. HP won't help because Windows is not officially released yet.

HP MediaSmart Webcam here
Message Edited by Daniel_Potyrala on 10-17-2009 03:03 AM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Problem with Adobe PDF reader for Window 64 bit using Visual Studio professional 2013

Hi,
Does Adobe PDF reader support window 7 64bits?
Best regards,
Seah

Hello,
Short answer reading into your question which has no specifics, yes it does but I am guessing there is more to what you are asking so if you could please expand your question that would be great.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Problem with QT (QTOControl.dll) for Windows version 7.4

I developed a VB6 application that uses the quicktime function "CreateNewVideoFromImages". It worked perfectly for a long time, till the end of january, when QT 7.4 has been updated. Since that update, the called function makes the video with just 1 frame, although no errors are reported. I was getting crazy (same problem on two computers). Now I downgraded to an older version (7.1.3) and the application is working perfectly.
Any suggestion/known reason?
Thanks in advance for your help.

HP MediaSmart Webcam here
Message Edited by Daniel_Potyrala on 10-17-2009 03:03 AM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue?

After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

With Quicktime 7 Pro for Windows, is there a plug-in or add-on to have the screen recording capability?

With Quicktime 7 Pro for Windows, is there a plug-in or add-on to have the screen recording capability?

Screen recording is not a feature of QuickTime Player 7 Pro (Mac or Windows).
QuickTime X (ten) is Mac only software that does include screen recording features.

I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

Hi Dcee3,
Acrobat Standard has not been developed for Mac platform so Mac version is not available. It can only run on windows machine.
Regards,
Anand

Problems with SAPGUI 7.20 for Windows

Similar Messages

Maybe you are looking for