Problems with Solution Manager Graphics
We are in the process of installing Solution Manager 4.0. When we go to transactions SOLUTION_MANAGER and select a solution from the Solution Overview, none of the menus or menu graphics on the lower right side of the screen display. We get a red error icon on the bottom of the screen, but no error message. Similarly, none of the graphics display under SOLMAN_DIRECTORY.
We've tried all of the actions defined in Note 834832.
- All of the BSP's were activated in SICF.
- The defaultUser alias is created.
- We know that the hostname is correct because SOLUTION_MANAGER_BSP starts.
- We've confirms that IGS is loaded and works by running an IGS test program.
- We've tested the RFC connection to IGS.
Does anyone have any ideas of how we can further tear this problem apart in order to find out where the failure is happening?
I think the defaultUser alias may be the problem. Is there some way I can verify this alias from a browser or trace its execution?
SOLUTION_MANAGER_BSP has the same problem as SOLUTION_MANAGER.
We looked at SMICM and couldn't see anything obviously wrong. Nothing obviously wrong in the log. Is there something in particular we should be looking for in SCICM?
I'm looking for some sort of log that could actually show the requests running the actual BSP's. I don't see that in SMICM.
Any further ideas would be appreciated.
Similar Messages
-
Big Problem With Solution Manager EHP1 ?
Dear all,
I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
The program inform that:
"Runtime Errors: Message Type Unknow
What happened:
Error in ABAP Application program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
it has come across a statement that unfortunately cannot be excuted.
etc
Do you know about this problem, what is the errors ?
Thanks all.Dear all.
With Solution Manager EHP1
SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
Detail log as below:
Runtime Errors MESSAGE_TYPE_UNKNOWN
Date and Time 28.04.2009 16:47:15
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
"SPROJECT_SYSL_CHECK_CENTRAL_SY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
"SPROJECT_SYSL_CHECK_CENTRAL_SY".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 29
of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28". -
Problem with Solution Manager wanting to adjust its own instance
I have a situation where under my landscape components --> systems in SMSY where I have a "yellow" exclamation point in a box that says "newer version exists" for my existing solution manager. When I try to adjust, it doesn't let me select the system because they are on the same host. Therefore, I can't do the adjustment. What is the problem? Any ideas how I can do this adjustment? Thanks. This is very important. Thanks.,
Thanks Ragu. I've dug a little deeper and this is what is happening when I try to assign the Solution Manager instance to a logical component:
I receive an "instance
adjustment required" message for the actual solution manager instance
itself, so I had to manually set the product and set it to leading as
leading (even though there was no other solution manager instance).
This means that the solution manager system itself is set to manual
adjustment. I've gotten it to read from the SLD, but it is still acting as though it is missing a NetWeaver ABAP Server on the same host as the Solution Manager.
Here is what I do to get the above issue to reproduce:
I've done more trouble shooting and found that if I go to installed product versions in the Solution Manager System and click on Clean-up Inconsistencies, I get
the attached screenshot showing that a Product SAP NetWeaver with main instance "Application Server ABAP" is inconsistent (on the same server as the Solutiion Manager instance, the Solutioni Manager instance doesn't show up in the System landscape either). Cleaning up the inconsistency doesn't fix the problem (leaves Application Server ABAP) in place. Meaning when I try to fix the inconsistency it won't let me. Thanks for any help, I really need to figure this out. Thanks. -
Installation problem with Solution Manager 4.0 on Windows 2003/Oracle 10.2
Hello,
I'm receving the following error message while running SAPinst on step 11 Create Database:
ERROR 2007-05-31 23:20:32
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
OLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2007-05-31 23:20:32
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-31 23:20:32
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
I've read the log file referenced above and did not find any additional details.
I'll post the entire log below as well:
INFO 2007-05-31 15:05:44
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.4.xml'.
INFO 2007-05-31 15:05:45
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.5.xml'.
INFO 2007-05-31 15:05:52
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-05-31 15:06:11
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.3.xml'.
INFO 2007-05-31 15:06:11
Execute step runCatprocSql of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0.
INFO 2007-05-31 15:06:16
Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 15:06:16
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 15:06:18
Switched to user: sm1adm.
INFO 2007-05-31 15:06:18
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
INFO 2007-05-31 15:07:03
Switched to user: sm1adm.
INFO 2007-05-31 15:07:06
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
ERROR 2007-05-31 15:21:34
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
SQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_table
SQL> Rem liwong 10/20/00 - add def$_destination.flag
SQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue table
SQL> Rem narora 09/13/00 - add comment on new def$_destination columns
SQL> Rem liwong 09/01/00 - add master w/o quiesce: fixes
SQL> Rem liwong 07/12/00 - add total_prop_time_lat
SQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_time
SQL> Rem liwong 05/17/00 - add_master_db w/o quiesce
SQL> Rem jstamos 05/17/00 - add_master_db w/o quiesce
SQL> Rem elu 01/24/00 - add column apply_init to def$_destination
SQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger on
SQL> Rem def$_propagator
SQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactions
SQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocks
SQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table for
SQL> Rem server-side RepAPI
SQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_table
SQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCY
SQL> Rem nbhatt 04/21/97 - change syntax of create_queue
SQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}
SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typo
SQL> Rem jstamos 04/10/97 - remove unneeded indexes
SQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetable
SQL> Rem jstamos 04/04/97 - tighter AQ integration
SQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldest
SQL> Rem ato 03/31/97 - create_qtable interface change
SQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorder
SQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerror
SQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcall
SQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_call
SQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)
SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcall
SQL> Rem liwong 01/07/97 - Alter default value for batch_no
SQL> Rem jstamos 12/23/96 - change temp$nclob col
SQL> Rem jstamos 11/21/96 - nchar support
SQL> Rem sjain 11/11/96 - Remove dummy buffer # comment
SQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerror
SQL> Rem sjain 11/06/96 - deferror changes
SQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lob
SQL> Rem sjain 10/02/96 - Aq conversion
SQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key index
SQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclob
SQL> Rem sjain 09/03/96 - AQ converson
SQL> Rem ademers 08/02/96 - queue_batch default in def_destination
SQL> Rem ademers 07/29/96 - queue_batch default in def_call
SQL> Rem ademers 07/29/96 - queue_batch default
SQL> Rem jstamos 07/24/96 - add system.temp$lob
SQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tables
SQL> Rem jstamos 06/12/96 - LOB support for deferred RPCs
SQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorder
SQL> Rem ademers 05/30/96 - create def_origin
SQL> Rem ademers 05/28/96 - fix def_destination col names
SQL> Rem ldoo 05/09/96 - New security model
SQL> Rem sjain 05/01/96 - add seq col to def_destination
SQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_call
SQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queue
SQL> Rem jstamos 08/17/95 - code review changes
SQL> Rem jstamos 08/16/95 - add comments to tables
SQL> Rem wmaimone 01/04/96 - 7.3 merge
SQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2007-05-31 15:21:34
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-31 15:21:34
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
INFO 2007-05-31 23:06:17
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql".
INFO 2007-05-31 23:06:18
Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 23:06:18
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 23:06:18
Switched to user: sm1adm.
INFO 2007-05-31 23:06:18
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
INFO 2007-05-31 23:06:20
Switched to user: sm1adm.
INFO 2007-05-31 23:06:20
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
ERROR 2007-05-31 23:20:32
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
SQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_table
SQL> Rem liwong 10/20/00 - add def$_destination.flag
SQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue table
SQL> Rem narora 09/13/00 - add comment on new def$_destination columns
SQL> Rem liwong 09/01/00 - add master w/o quiesce: fixes
SQL> Rem liwong 07/12/00 - add total_prop_time_lat
SQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_time
SQL> Rem liwong 05/17/00 - add_master_db w/o quiesce
SQL> Rem jstamos 05/17/00 - add_master_db w/o quiesce
SQL> Rem elu 01/24/00 - add column apply_init to def$_destination
SQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger on
SQL> Rem def$_propagator
SQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactions
SQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocks
SQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table for
SQL> Rem server-side RepAPI
SQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_table
SQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCY
SQL> Rem nbhatt 04/21/97 - change syntax of create_queue
SQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}
SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typo
SQL> Rem jstamos 04/10/97 - remove unneeded indexes
SQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetable
SQL> Rem jstamos 04/04/97 - tighter AQ integration
SQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldest
SQL> Rem ato 03/31/97 - create_qtable interface change
SQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorder
SQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerror
SQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcall
SQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_call
SQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)
SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcall
SQL> Rem liwong 01/07/97 - Alter default value for batch_no
SQL> Rem jstamos 12/23/96 - change temp$nclob col
SQL> Rem jstamos 11/21/96 - nchar support
SQL> Rem sjain 11/11/96 - Remove dummy buffer # comment
SQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerror
SQL> Rem sjain 11/06/96 - deferror changes
SQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lob
SQL> Rem sjain 10/02/96 - Aq conversion
SQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key index
SQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclob
SQL> Rem sjain 09/03/96 - AQ converson
SQL> Rem ademers 08/02/96 - queue_batch default in def_destination
SQL> Rem ademers 07/29/96 - queue_batch default in def_call
SQL> Rem ademers 07/29/96 - queue_batch default
SQL> Rem jstamos 07/24/96 - add system.temp$lob
SQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tables
SQL> Rem jstamos 06/12/96 - LOB support for deferred RPCs
SQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorder
SQL> Rem ademers 05/30/96 - create def_origin
SQL> Rem ademers 05/28/96 - fix def_destination col names
SQL> Rem ldoo 05/09/96 - New security model
SQL> Rem sjain 05/01/96 - add seq col to def_destination
SQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_call
SQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queue
SQL> Rem jstamos 08/17/95 - code review changes
SQL> Rem jstamos 08/16/95 - add comments to tables
SQL> Rem wmaimone 01/04/96 - 7.3 merge
SQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2007-05-31 23:20:32
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-31 23:20:32
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
Thanks in advnace for your help,
GlenWhat do you see in ora_sql_result.log? (the last lines containing the error)?
Markus -
Problem starting with solution manager
hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes. After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
These are some errors that I can find in workdir
Tue Jan 27 15:08:51 2009
ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
t.c 473]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c 9618]
ERROR => ErrTrace: no error info available [err_mt.c 1507]
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
>TS> Tue Jan 27 15:10:51 2009
T:4398099755584 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
System is a Suse/Linux ppc64, with MaxDB as database
Please help me!!
hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes. After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
These are some errors that I can find in workdir
Tue Jan 27 15:08:51 2009
ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
t.c 473]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c 9618]
ERROR => ErrTrace: no error info available [err_mt.c 1507]
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
>TS> Tue Jan 27 15:10:51 2009
T:4398099755584 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
System is a Suse/Linux ppc64, with MaxDB as database
Please help me!!hi,
there is anyone who can help me?
Many Thanks
Fabrizio -
Problem with my amd graphic card
Hi.. I have a problem with my amd graphic card.. The card is amd radeon 6770m.. I did format on my laptop and when I tried to install the catalyst center which includes the driver, it displays a message which say that catalyst center stop working... I have downloaded all the versions of the driver since 2011 when I bought the laptop... But I have the same problem whichever version I try.. I also have updated the bios to the last version but nothing happens..I think maybe graphic card is broken.. Thanks for reading..
Hi @Lefteris93 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager. Restart the notebook and download from here.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook. If you graphics card was damaged or not functioning you would have a black or blank screen.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Problem installing SOLUTION MANAGER in db2
Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR 2008-08-26 11:19:30.422
CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR 2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
Database Connection Information
Database server = DB2/AIX64 9.1.4
SQL authorization ID = DB2SOL
Local database alias = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
Database Connection Information
Database server = DB2/AIX64 9.1.4
SQL authorization ID = SAPSOL
Local database alias = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
JuleneHi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M -
Solution Monitoring configuration with solution manager 4.0
Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C -
Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.
Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you -
PCI or PIC intergration with Solution Manager
Hi Gurus
am investigating the intergration of PIC or PCI (not sure) intergration with Solution Manager has any of you done the intergration or know of any consulting company that have done it
TxHi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C -
CCMS-functinality with Solution Manager 4.0
Hello,
I am seeking for the documentation regarding the setup and use the CCMS-functionality with Solution Manager 4.0
Is there some documents describing this feature in details?
Thank you!
regards
AxelHi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C -
Help Needed: HP QTP/UFT integration with Solution Manager
Hi Experts,
We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
Detailed steps for replicating the issue:
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
2. Open Unified Functional Testing (UFT) 12.00
3. Click File -> New -> Test
4. Type even a dummy script in the Action window
5. Save Test Script by clicking File -> Save <test name> As…
6. Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
7. Error Message appears
Note:
One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
I am asked if I want to overwrite existing test in Solution Manager.Hi,
I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
Error:
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
LOCATION CPIC (TCP/IP) on local host
ERROR partner <IP>:3300' not reached
TIME Tue Jan 19 12:02:17 201
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 3286
DETAIL NiPConnect2: 192.12.353.12:3302
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 1
Could you please guide?
Regards,
Raichand -
SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19
Hi,
Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
Also system is not showing any data in Introscope Dashboard. Any guess for this?
Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
Still no data and still in SMD Agent logs saposcol service warning is there.
Thanks & Regards,
Manish SinghHi Jansi,
Thanks for the reply..
Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
[EXCEPTION]
com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
at java.lang.Thread.run(Thread.java:664)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
... 25 more
Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
[EXCEPTION]
com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
at java.lang.Thread.run(Thread.java:664)
Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 1552388) is already running .....
Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
[EXCEPTION]
java.lang.NullPointerException:
at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
at java.lang.Thread.run(Thread.java:664)
Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
Any ides or help steps to do that?
Thanks,
Manish Singh -
How to setup CCMS with Solution Manager
Hi, All
My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
Is that RFC connection using both sites, trusted and satellite system ?
I would like to setup CCMS alerts through Solution manager and R/3 ccms
please anyone has some guide or URL or any idea send me
We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
Thanks in advanced
J
Edited by: issue2008 on Sep 19, 2008 12:13 PMyou need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).
-
SAP NW 7.4 as java system sync with solution manager system 7.1 issue
Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance ThanksHi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak
Maybe you are looking for
-
Dear all, we have to develope report for CM56 transaction which is generally use for resource allotted to pegged requirement. can anyone let me know related tables & internal link between them so that i can work on from my side. Output required is Ou
-
Will an app on my iphone go onto my computer if it is no longer on the App Store?
Will an app on my iphone go onto my computer if it is no longer on the App Store?
-
How can I get more space between items in a line of text .. elegantly
Ok I have some equations that follow each other in a text line, eg Xc=10^6/2 pi f C Xc = 10^6/2* pi *50 * C Xc = 10^4/pi C ................. etc. Is there some way I can eg put a css entity in the paragraph so I can dimension the space as a
-
LabVIEW not reading data correctly
I'm new to LabVIEW (using it for a subject at university) but I've coded up a short program that counts rising and falling edges of a signal (to be used with input of a quadrature encoder). I've tested it at low frequency using the Simulate Signal bl
-
Gcc problems on Solaris 10 X86
I'm using Solaris 10 x86 and gcc from /usr/sfw/bin and have come across a couple of problems: which gcc /usr/sfw/bin/gcc gcc -v Reading specs from /usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3/specs Configured with: /builds/sfw10-gate/usr/src/cmd/gcc/gc