Problems with the "Get" command
I downloaded my site to Dreamweaver. I used the "Get" command
and imported it to Dreamweaver. That was fine except that it erased
all my files on my server. Now my site is just a bunch of
blank pages.
I hope I can fix the problem by uploading my files back on to
my server using the
Put command.
Is there any way to prevent this happening again?
Thanks,
> That was fine except that it erased
all my files on my
> server.
Cannot possibly do this. The GET function only copies - it
doesn't delete.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Tynos" <[email protected]> wrote in message
news:ehfprp$fsl$[email protected]..
>I downloaded my site to Dreamweaver. I used the "Get"
command and imported
>it
> to Dreamweaver. That was fine except that it erased
all my files
> on my
> server. Now my site is just a bunch of blank pages.
>
> I hope I can fix the problem by uploading my files back
on to my server
> using
> the
Put command.
>
> Is there any way to prevent this happening again?
>
> Thanks,
>
Similar Messages
-
Problems with the vba command sendkeys in Access 2013.
Hi, I have problems with the vba command sendkeys in Access 2013.
I use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field, then place (paste) the text in a Word document. The command line sendkeys
is followed by moving the focus to a particular control. In Access 2003, which went smoothly. Now the sendkeys command is executed only in Access 2013 in the control that then receives focus. If the procedure ends with the sendkeys command then it works well.
The procedure with the sendkeys command is activated by a button on a form.
Who can help me?
private userHi H.Plmp,
Based on the description, you want to call the sendkeys from a button.
>> use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field<<
What did you mean that you no control? And how did you get the text in memory from the text field? Also I am not able to understand the exact reason that the command doesn't works in Access 2013.
And based on the test, sendkeys "+ {Delete}" works well for me when I set a focus for the textbox control. Here is th test code:
Me.Controls("txtField1").SetFocus
SendKeys "+ {DELETE}", 1
If I misunderstood, please feel free to let me know.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem with the dblink command
I am working with the dblink command. i have connected to a remote machine which i have configured in my TNS names under the name 'miracle'. so now i have created a dblink to that m/c as:
create database link data_link connect to scott identified by tiger using 'miracle';
where scott/tiger is the schema on the remote machine.
now i am accessing a table 'X' on the remote m/c as:
select * from X@miracle;
but i am getting an error saying:
select * from x@miracle
ERROR at line 1:
ORA-02019: connection description for remote database not found
somebody please help me.Also, is the source database (from where you are running the select statement), installed on the machine where you updated the tnsnames entry?
If you change your local tnsnames it will not work. you need to change the tnsnames entry on the Orcle home where the database server is installed. -
Problems with the Host command (copying files)
i am trying to copy a file from one location to another.
i use the get_file_name function to select the file i want to copy.
it does not work when in the path, if the directory name has a space in between.(e.g New Folder).The error i get is(the system cannot find the path specified)
it works fine when a folder name does not have any space(e.g NewFolder).
y:='o:\documents\filname.doc';
x := get_file_name(null,null,null,null,open_file,true);
host('cmd /c start /w copy '|| x ||' '|| y,no_screen);
any help would be appreciated
ThanksBut this is all me, and I do A LOT of scrolling back and forth to cross check facts and so on. Having to constantly switch between files would be a huge pain.
I guess it's a matter of work styles, but I'd much prefer to switch around among a batch of open chapters with a simple key combination, as opposed to scrolling back and forth through pages in linear fashion.
How would ID handle a document of this complexity?
With the limited information you've offered, I'd say I have experience with similar documents, (product catalogs/pricelists), that ID handled just fine, and other cases in which seemingly simple files choked it. I can say the same of Quark. No one can answer your question definitively; there are too many variables. Chances are it's not (only) the size and complexity of your document in itself that are causing your problems. There can be any number of hardware or OS issues contributing, to name a couple. -
Problem with the "import" command...
Hi...I'm working with drivers and objects right now. My last class project was to create a Hi-Lo type of card game where a card would be drawn..then the user would have to guess if the next card would be higher or lower... We had to create an object called "PlayingCard." So in the driver..of course we had to use "import PlayingCard;"...Now this is where the problem is: when i try to compile the driver..i get the error "cannot resolve symbol" where the carrot is pointing under the "i" in "import PlayingCard;"... Also, in the driver program we had to create two cards "PlayingCard c1 = new PlayingCard();" and "PlayingCard c2 = new PlayingCard();"... When trying to compile there is also the same "cannot resolve symbol" error..with the carrot pointing under the "P" in the "PlayingCard ......."
I already checked the obvious..case sensitives and all... The weird thing is that on my friends comp..he is able to successfully compile my driver and object. The same thing goes for when I use the computer at school. It works without changing anything. My friend has the same problem..he can't compile on his machine running XP..but he can on his machine running 2000. We thought it was an OS problem..but my machine is running XP (the one that works for him). So what could be the problem?? I tried reinstalling, tried 1.3 and 1.4, etc etc.
If anyone has a solution..please help! Thanks in advance!!If PlayingCard is not in a package (ie doesn't begin with a package statement), then you don't need to import it.
-
Problem with the MINUS command
I am trying to use the MINUS command to remove rows that are returned from my query, I understand the reason they arent being removed is that the MON column is different, what I need to know is can I just have the MINUS command look at NO column.
Thanks,
Aaron
[email protected]
The table looks like this
NO MON
100 JUN
101 JUN
101 JUL
102 MAY
103 JUL
I want this returned (NO 101)
100 JUN
102 MAY
103 JUL
When I use the following query I get the results I am looking for
SELECT NO
FROM TABLE
MINUS
SELECT NO
FROM TABLE
RETURNS:
100
102
103
** BUT **
Unfortunately I need both columns returned in the query, so when I use this query
SELECT NO, MON
FROM TABLE
MINUS
SELECT NO, MON
FROM TABLE
RETURNS:
100 JUN
101 JUN
101 JUL
102 MAY
103 JUL
And the 101 rows are there.
nullAaron,
If you just want to eliminate the 101 values from the NO column, use the WHERE clause, thus,
SELECT NO, MON
FROM TABLE
WHERE NO != 101
MINUS
SELECT NO, MON
FROM TABLE
WEHRE NO != 101
Regards,
John
null -
Problem with the say command in Mac OS X Mountain Lion
When using the say command in mac osx lion if you have the phrase "Cinco de Mayo" in a line everything after it is dropped. Why?
Did you follow the instructions HERE?
-
Problem with FNDLOAD upload command for Concurrent Program
Hi Apps Gurus,
I am facing a peculiar problem with the FNDLOAD command.
My customer has a concurrent program which is running fine in Prod, and now they have requeseted for a change in the program, the change requested was to modify the parameters and the name of the program. I have done the changes and when I try migrating this change from DEV instance to IAT using FNDLOAD commands it is not getting migrated. There does not seem to be any problem with the LDT file, There is no error message in the log as well.
However I have noticed something very peculiar.* In the target instance (IAT) , when i run the FNDLOAD command directly the migration is unsuccessful but when i delete the existing parameters of the prog and rename the concurrent program and then run the FNDLOAD command the migration is sucessful and the changes are getting reflected!!. I dont understand why this is happening. This is happening in preprod as well , the migration is unsucessfull initially when i directly run the command, when i modify the name and parameters of the prog and then run the command the migration is sucessful. Now i do not have access to prod and this trick of changing prog name and parameters cannot be done in prod , so I need a proper solution for the migration.
Any pointers to resolve this issue will be helpful.
Thanks,
MaheshI am facing a peculiar problem with the FNDLOAD command.
My customer has a concurrent program which is running fine in Prod, and now they have requeseted for a change in the program, the change requested was to modify the parameters and the name of the program. I have done the changes and when I try migrating this change from DEV instance to IAT using FNDLOAD commands it is not getting migrated. There does not seem to be any problem with the LDT file, There is no error message in the log as well.
However I have noticed something very peculiar.* In the target instance (IAT) , when i run the FNDLOAD command directly the migration is unsuccessful but when i delete the existing parameters of the prog and rename the concurrent program and then run the FNDLOAD command the migration is sucessful and the changes are getting reflected!!. I dont understand why this is happening. This is happening in preprod as well , the migration is unsucessfull initially when i directly run the command, when i modify the name and parameters of the prog and then run the command the migration is sucessful. Now i do not have access to prod and this trick of changing prog name and parameters cannot be done in prod , so I need a proper solution for the migration.
Any pointers to resolve this issue will be helpful.What are the commands you used for the download/upload?
Do you get any errors in the log files?
Please see (FNDLOAD Download / Upload Concurrent Programs Fails To Load Parameters [ID 1101946.1]).
Thanks,
Hussein -
Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?
No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.
-
I am getting an error encountered problem with the display driver for my Photoshop CS5 extended
I have Windows 7 and have used CS5 extended with no problems for quite a while now.
Last week I started up CS5 and received the error:
"Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
"Please close program and uninstall and re-install if problem persists"
I was able to edit, however when I went to save my work it would not do so. The following error came up.
"Could not complete the command because the extension could not be loaded"
"Could not save a copy as .....because of a program error"
I checked to make sure I have the latest driver, I also uninstalled and re-installed the program and I am still getting the errors.
Can anyone help with this?Error 1402 | Error 1406 | Acrobat, Reader
-
Could not complete the ... command because of a problem with the filter module interface
I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
StuNot sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu -
Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!
Maybe you are looking for
-
Permissions Repair: Warning SUID file issue?
Greetings, I have been having a sleep issue and an occasional error message that said the Time Machine backup could not be completed so I ran disk utility to repair permissions and this is what it said; +Verify permissions for "Macintosh HD"+ +Permis
-
How do I transfer contacts from an Android to an iphone 6? I have backed up everything to Verizon Cloud but I can't get the two phones to pair up?
-
N80 restarts when try to use uPnP
I have a N80 Internet Edition with firmware 5.0719.0.2 and I installed the Home Media Server application from the CD. I use windows XP SP2 Professional and a Comtrend CT-536+ router. But when I try to enter in home network in the Gallery, the phone r
-
Multi Master Replication - Only works for some tables?
I have a multi master replication between a 9i and an 816 database. All the tables are in the same tablespace and have the same owner. The replication user has full privs on all the tables. When setting up the replication some tables create properly,
-
what I want to do is to be able to add details of the subject and add information but not in the file name, as i find this a useful way to file the history of all my uploads. Have I missed a feature that allows me to do this without being online and