Problems with the key word function

Have recently acquired Lightroom. I uploaded my photos into Lightroom and have pretty much key worded all of them. I have had something happen which I am not sure why and hope you all can enlighten me. I did a search for Flower and my flower photos showed up along with a bunch of other photos. These other photos did not have the key word flower yet they appeared in the group. Any idea why? Thanks in advance.
Mike

Thanks for responding. I did try your suggestion and only those photos with flower appeared. I just solved my problem though I don’t know why it happens. When I selected text at the top of the window, I left the other fields alone. This time I changed any searchable field to Keys words and that caused only the key worded photos to appear. I till don’t understand why leaving “any searchable field” the way it is would cause this. I could understand if all the photos then appeared but they don’t only a few.
Anyway thanks for responding, I appreciate it. I wonder if anyone else has experienced this?
Mike Crosa

Similar Messages

Display Problem with the Key Figures

Hi,
I working on the query where i need to display three Key Figures. I have no problem with the first two Key Figures , but the third Key figure values need to be display by day wise. (0Calday). i.e., the third key figure value should be displayed based no of days 0Calday has.
For Example if 0Calday is holding 4 days... then third keyfigure Value should be display as 4 columns with their respective values by dividing into day wise, remaining first two key figures should not be changed.
When i am trying to call the 0Calday into the Column, all the three Key Figures values are displaying as many as no of days 0calday has.
For Example if 0Calday has 2 day....the three Key Figures are values are breaking into two days values and displaying, so totally we can see 6 Key figure values. But i need first two values should not break but the last key figure should be divide into two days as values and display.
Thanks & Regards
Agama.

Hi Venkat
This can be achieved by supressing 0 values.
1) In the Query Designer: Go toquery properties
2) Select Suppress Zeros
3) Select option Active
4) Under Effect On : try with Column or row o (Not infront of system , so cannot exactly remember)
This will allow you to get the exact result as per your requirement. We had the same issue and we could resolve this by following this.
Hope it helps.
Cheers

Problem with the "now playing"-function after timer sleep-mode

At first: sorry for my english.
I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

Problem with the math library functions

Hi,
I encountered a problem related to some functions provided by math library on sun. I narrowed it down to the following test program:
========================================================
#include<stdio.h>
#include<math.h>
void pow_res()
double x = 10.0;
double y = 2.5;
printf("pow(%.2e, %.2e):%.20e\n", x, y, pow(10.0, 2.5));
void cos_res()
double x = -6.433230338433114370e-02;
printf("x:%.20e cos(x):%.20e\n", x, cos(x));
int main()
pow_res();
cos_res();
return 0;
========================================================
The above test program has to be linked with any math library. It is �libm� for amd64/linux, but for sparc we have choice between �libm� and �libmopt�. I am compiling above program with "cc <test_program.c> <-lm/-lmopt>" command.
On sparc, if the above test program is getting linked with �-lm" then it gives same results for the �cos� on both amd64 and sparc, but gives different results (16th decimal digit onward) for �pow�. If it is getting linked with �-lmopt� then it gives same result for the �pow� on both the platforms, but gives different results for �cos�. Linux results match with the amd64 results.
The �Numerical Computation Guide� provided by SUN (ftp://docs-pdf.sun.com/802-5692/802-5692.pdf page 40, table 2.10 ) says that you can trust only 15-17 decimal digits for double calculation. But here the requirement is to match the sparc results exactly with the amd64/linux or at least match the result till 20th decimal digit. I guess it is something to do with the FPU setting either through compiler options or code. I tried many different compiler options, like -fast, different combinations of compiler options provided by -fast macro, but nothing helped.
Following is the system configuration:
Amd64:
gcc version: 3.3.6
OS: RedHat Enterprise Linux 3.0 U7 (Linux 2.4.21-40.ELsmp x86_64)
Sparc:
cc version: Sun C 5.8 Patch 121015-01
OS: SunOS 5.9 Generic_118558-21 sun4u sparc SUNW,Sun-Fire-280R
It will be great if somebody can explain the problem and the solution to get rid of it.
Many thanks,
Sunil

Transcendental functions are not specified to be correctly rounded in the same
sense as +-*/. So it's entirely possible, and often observed, that libraries of equal
quality deliver slightly different results.
To simplify, suppose one wanted to compute x = 4*atan(1.0)
which happens to be the
transcendental number pi which is roughly, in hex and in decimali:
.C90F DAA2 2168 C234 C... * 2^4 or 3.141592653589793239...
But binary floating-point arithmetic can only represent certain rational numbers of
the form of an integer of at most 53 significant bits times a power of two. The
nearest double-precision number to pi is
.C90F DAA2 2168 C * 2^4 or roughly 3.141592653589793116...
This particular number has a large but finite decimal expansion. And if you
do printf with %e.20 you will get the 20 decimal digits of that double-precision
number's expansion, not the 20 decimal digits of pi, which only agrees to the
15 significant decimals 3.141592653589793 and differs afterward.
In the case of pow(10.0,2.5), (which happens to be sqrt(1.0e5))
the correct result in hex looks something like
.9E1D 276F D4BA C410 C... * 2^9 or roughly 3.162277660168379332...E+2
in hex notation, while the closest double precision number is
.9E1D 276F D4BA C8 * 2^9 or roughly 3.162277660168379612...E+2
but it's only slightly closer than the next closest double precision number
.9E1D 276F D4BA c0 *2^9 or roughly 3.162277660168379043...E+2
Either answer is a good answer, and math libraries might that only aspire to
deliver results that are close to correctly rounded might deliver either, depending
on which approximation algorithm is used, which might depend on what's fastest
on a particular processor.
So why don't math libraries deliver correctly rounded results instead of almost?
Because the slight extra increase in accuracy doesn't do much good for most
people, and the major decrease in performance is noticeable by lots of people.
The main payoff of correctly rounded transcendental functions is that they
promote uniform numerical results across platforms, which is worth something
to some people but not much to many people.
So for those who find it worthwhile, there are correctly rounded transcendental
function libraries available. Sun's development version is available at
http://www.sun.com/download/products.xml?id=41797765
Another solution for some people is to change double variables and functions
to long double, using powl and cosl in the examples. That increases the
accuracy to almost 20 digits on x86 and over 30 digits on SPARC, and while
the same issues eventually arise, most users would never encounter them.
The SPARC long double implementation is in software rather than hardware,
and so entails a major performance reduction compared to double.
The Numerical Computation Guide at docs.sun.com discusses many of these
issues at greater length.

Problems with the Search/Find function in Reader 10.1.6

I gave in a keyword in a 430 pages dokument (photoshopelements6_help.pdf) and got many search results for different keywords (in bold) but not for my keyword!!

Then it's more than likely a scanned image of text rather than actual text. Unsearchable.
thedge000 wrote:
I did some additional checking and found the unsearchable document does not contain fonts under File > Properties> Fonts.

Problems using the reset password function on mac osx server.

Hey ,
Having problems with the reset password functions on the OSX server. When I try to do through the command line it asks for the old password of the user. So how do I fix the problem? Do I have to log in onto the ldap server as the admin and reset from there or is there an easy fix to make the reset password function work. When I try the reset password function the server is not taking the input when I click on change password. So any helpful suggestions are welcome. Verson OSX lion 10.7.5
Thanks in Advance,

Excuse me for misunderstanding your post. You explicitly stated in your post
ashdatla wrote:
through the command line
and wrote that it asks for the old password. Server.app is not accessed through the command line, and it does not ask for the old password of the user.
You might like to try Workgroup Manager instead.

Problem with the XML in Word 2007 (Word Template)

Hi Experts,
i am new on CRM 2007 and i have a problem with the XML Structure of the Word Template.
First i built a Web Service Design Tool. Then i saw on the Testpage, that it works.
So i started the Document Templates and created a new Template. Object Type was BUS2000126 - CRM Business Activity. Web Service was my created and tested Web Service Tool.
As i opened the Word 2007 with the XML-Structure, i recognized, that there was something wrong.
The Responce on my Testpage from the Web Service Tool had the following structure:
response (test.types.p1.CrmostZlaWord5ReadResponse)
   Output (test.types.p1.CrmostZla010RoszlaWord5001)
        ZlaWord5 (test.types.p1.CrmostZla010Rosbtorder)
            Administrativeheaderoforder (test.types.p1.CrmostZla010Rosbtorderhea001)
                 Partiesinvolvedofheader (test.types.p1.CrmostZla010Rosbtheaderpa001)
                     Allpartiesinvolved (test.types.p1.CrmostZla010Rosbtpartnera002[]) Displaying 3 elements of 3
                          element1 (test.types.p1.CrmostZla010Rosbtpartnera002)
                               Btpartneraddress (test.types.p1.CrmostZla010Rosbtpartnera001)
My Problem is now, that the XML-Structure got not that point "element1".
Instead of "element1" there is the point "item" in my XML-Structure in Word 2007.
I guess that is the Problem why i am not getting the fields of the Btpartneraddress filled in my Word.
Can anyone help me? Or put me in the right direction that i can change the XML?
Thanks for your help
André

Hi andré, I guess the issue is coming from the fact that you selected "AllPartiesInvolved" and that may contain any numbers of entries. So when you test your webservice, you put a key and then get a result for that key, and in that case you might get "element1" until "element3" for example if there was 3 partners involved in you activity.
But, when you design your template, you don't have a key at that moment, so in the Web Service structure, you have "items" which stands for all the possible entries you might retrieve at runtime. I guess you could use an index in your template to specify which item you need, but this is quite hasardeous, so i would be you, I would not design my web service to use "AllPartiesInvolved" but rather a specific Partner type like contact person for instance.
Regards,
Xavier

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

Problems with the function DBMS_XMLSCHEMA.copyEvolve

I´m having problems with the evolution of xml-schema.
First the function DBMS_XMLSCHEMA.copyEvolve works correctly, but since one week I get only errors. Strangely is the fact that I use the same files (xml-schema, xslt and xml instances) and the same SQL-Code. Even if I delete all tables, directories, ... with the drop instruction and create them again, I get only error messages. It is also strangely that the function DBMS_XMLSCHEMA.copyEvolve not works if the old and new xml-schema are identical and no XSLT-Stylesheet is handed over. Can by the function DBMS_XMLSCHEMA.copyEvolve something going wrong in the database ? Do I must recreate the database, and how can I do that by the XE? But that can not be a good solution.
Has anybody a idea what can I do?
Here is my error report:
Error starting at line 1 in command:
BEGIN
DBMS_XMLSCHEMA.copyEvolve(
schemaURLs => xdb$string_list_t('http://localhost:8080/internal/xmlschema/testschema.xsd'),
newSchemas => XMLSequenceType(XDBURIType('/public/testschema_evolution.xsd').getXML()),
transforms => XMLSequenceType(XDBURIType('/public/MapTotestschema_evolution.xslt').getXML()));
END;
Error report:
ORA-30944: Fehler beim Rollback für XML-Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle "MYUSER"."XMLSCHEMATABELLE" Spalte ""
ORA-02304: Ungültiges Objektidentifizierungsliteral
ORA-30942: Fehler bei XML Schema Evolution für Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle <n/a> Spalte ""
ORA-31088: Objekt "MYUSER"."BIN$QNQjNoYiRfC4KlQtnfUpMw==$0" hängt von Schema ab
ORA-06512: in "XDB.DBMS_XMLSCHEMA_INT", Zeile 113
ORA-06512: in "XDB.DBMS_XMLSCHEMA", Zeile 210
ORA-06512: in Zeile 2
Thanks David

Can you try doing the following before running copyEvolve
SQL> purge recyclebin
2 /
Recyclebin purged.
SQL> alter session set recyclebin = off
2 /
Session altered.
SQL>and see if it works as expected.

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

Hello there, AntRambo.
The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And also the following:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Particularly but not exclusively of note:
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
Feroze

Hi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error thread java : problem with the function "resume 0x***" (forum sun)

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
     public static void main(String[] args){
          Room r = new Room();
          decrease de = new decrease(r);
          increase in = new increase(r);
          de.start();
          in.start();
class Room {
     private volatile int degre=20;
     public void more(){
     degre += 4;
     public void less(){
     degre -= 3;
class decrease extends Thread{
private Room room;
public decrease(Room r){
          room =r;
public void run(){
try{
     while (!interrupted()){
          room.less();
catch(InterruptedException e) {}
class increase extends Thread{
private Room room;
public increase(Room r){
     room =r;
public void run(){
     try{
          while (!interrupted()){
               room.more();
catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Hi,
I have read the FAQ of the JMF.
The problem was the jar files of the JMF were not in the JRE\BIN\EXT
folder of the Java runtime!
now it works!
thanks
Reg

Function module based generic extractor - Problem with the selection

Hi all
The following is my code in the function module. I am able to get the entire data if i dont give any selections and the number of records is also correct. But when i select a MATNR value, it returns 0 records where as it needs to return 3 records. If i give selection based on bukrs, werks, lgort its working fine. But if i give selection based on MATNR, then it is not working.... I think there is a problem in the bold part of my code. If i debug, LS_MATNR is having the correct value which indicates that there is no problem with the value being passed to LS_MATNR from my selection screen of my datasource in RSA3. Even GT_WERKS is also having data. Please help.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT MARA~MANDT
        MARA~MATNR
        MARC~WERKS
        MARD~LGORT
        MARA~MEINS
        MARD~LABST
        MARD~EINME
        MARD~SPEME
        MARD~RETME
        MARD~INSME
        MARD~UMLME
        MARD~VMLAB
        MARD~VMEIN
        MARD~VMSPE
        MARD~VMRET
        MARD~VMINS
        MARD~VMUML
        MARC~XCHPF
        MARD~KLABS
        MARD~KEINM
        MARD~KSPEM
        MARD~KINSM
from MARA inner join MARC on
MARAMANDT = MARCMANDT AND
MARAMATNR = MARCMATNR
inner join MARD on
MARAMANDT = MARDMANDT AND
MARAMATNR = MARDMATNR
AND MARCWERKS = MARDWERKS
for all entries in gt_werks
where MARC~werks EQ gt_werks-werks
AND MARA~MATNR in LS_MATNR.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.

try this
select marc~matnr MARC~WERKS into t_marc for all entries in gt_werks
where werks EQ gt_werks-werks and lvorm = space.
if t_marc is not initial.
select MARD~LGORT MARD~WERKS MARA~MEINS MARD~LABST MARD~EINME
MARD~SPEME MARD~RETME MARD~INSME MARD~UMLME
MARD~VMLAB MARD~VMEIN MARD~VMSPE MARD~VMRET
MARD~VMINS MARD~VMUML MARC~XCHPF MARD~KLABS
MARD~KEINM MARD~KSPEM MARD~KINSM MARA~MEINS from
mard inner join MARA on mard~matnr = mara~matnr
for all entries in t_marc where mard~matnr = t_marc-matnr and mard-werks = t_marc-matnr
and mard~lvorm = space.

I 've a problem with the print function of Itunes

helo , i 've a problem with the print function of Itunes.
When i'm trying to create a pdf file of my entire library, i've got a partial file of it.
instead of the entire library (37000 songs - 209GByte) the pdf file contains only 18000 songs (1GB - pdf file).
Is there any problem with the pdf creation in Itunes ?
best regards
Marco
i mac 20" Mac OS X (10.4.9)

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Problems with the key word function

Similar Messages

Maybe you are looking for