Would there be a problem with the warranty in the UK if bought in USA? Plus is there a big difference between US and UK keyboards? Thanks

Hi, I'm from the UK and in the USA for a week. I'm thinking of purchasing an Air. Would there be a problem with the warranty in the UK if bought in the US? Plus is there a big difference between US and UK keyboards?
Cheers
G

There are subtle differences on a British layout, mainly having to do with the top line (shift numbers), to permit the use of European monetary symbols. There are a few other keys different (note the enter key).
Here are the basic layouts. Obviously the MBA won't have an eject key, as the power key resides in that location.
British English Keyboard
USA English Keyboard

Similar Messages

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
In i-Movie there is no problem with this film, but the problem begins by exporting to iDVD and making there a project.
Who can help me, then I cann't find everything about this in any forum?

Hi
Can be a problem that get multiplied and visible when iDVD encode for DVD.
A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
C. Does this problem arises what ever encoding quality You use ?
Yours Bengt W

App Store saying there is a problem with a previous purchase but i havent bought anything

My AppStore and iTunes wont let me download anything as it is sayin there is a problem with a previous purchase. I havent bought anything & now cant download anything. Even free apps. Help?

No one here can help you. Contact iTunes support & see what's going on:
http://www.apple.com/support/itunes/

When I hook my ipod to computer it reads: there is a problem with this drive scan the drivenow and fit it (F) it doesnt work

when I hook up ipod up to to itunes it reads: IP F There is a problem with this drive. scan the drive now and fix it. When I do this, nothing happens.

Hello,
I found the same issue. I have an iPod Classic 160 GB (Black) bought in April 2013. I'm using a Windows 8 Laptop bought in August 2014.
This is my account of this problem and why I think customers should just ignore the pop-up, but Apple (and possibly with Microsoft/Windows) should look at the issue.
Recently (approximately from early February 2015), when I connect the iPod to my computer I get a message saying there is a problem with the drive and it needs to be scanned and fixed. In full the message reads:
There's a problem with this drive. Scan the drive now and fix it.
This message appears very shortly and then immediately (once the message disappears, is clicked on, or x-d) brings up Windows File Explorer on the drive and its containing visible folders: which tells me nothing (though it can clearly open it and look at the files not locked to iTunes)
Other than this, the iPod seems to connect properly and work fine. iTunes (ver: 12.1.0.71 64bit) seems to find no issue. The iPod runs fine, it syncs properly (all of my music and podcasts). It responds as it always has and works for hours.
I did some troubleshooting: first on the wire, trying all ports and using an alternative, then on my laptop (all usb ports with other connectors and device drivers) and some basic testing of the iPod and iTunes. All of these seemed fine to me, no issue whatsoever other than the message every time I connect the iPod. So I just ignored it for a while.
Anyway, eventually I got curious (and had some more free time to look at it) and let Windows 8 do what it wanted (scan and fix the drive). Clearly the iPod works fine, and I have nothing important on it that isn't on my computer, so at worst Windows will break the software and I'd have to reformat the drive through iTunes (and Restore to Factory Settings) which I feel fine doing. I also took note of all of my settings on the iPod (like EQ, and the way I laid out the menus etc...) so I can redo those from defaults.
Prior to doing this, the iPod was version 2.0.5 (the latest version).
When I set the drive to be scanned, windows told me it identified the problem and would fix it. I don't remember the exact wording, as this message was immediately obscured by a pop-up telling me the drive was in use and software using it should be closed. So I closed iTunes which in turn caused the pop-up and message to disappear.
Windows then said it had succeeded and brought up the File Explorer of the drive again (now with some folders missing). When I loaded iTunes back up, it told me there was a problem with the iPod and it would need to be restored. Ejecting the iPod showed that it seemed to believe it had no content on it.
So I restored the iPod through iTunes, downloading the latest iPod update again and started syncing the iPod. After adding a couple songs, I ejected it and played them - they worked fine, the menus had returned to defaults but I quickly changed them to how I liked and overall the iPod is back to how it was. I've now set it to sync the remaining thousands of songs (and couple hundred podcasts). Edit - by the end of this post, this has finished copying Music, Podcasts, and Playlists. It's back to exactly how it was before.
Annoyingly, this has not removed the pop-up message when I connect the iPod, still the same as before - the most irksome thing being the file window opening every time i connect the iPod, though this is still minor (I just have to remember that this will happen and manually close it each time).
So I'm at a loss on the cause, and am going to return to ignore it. I'd greatly appreciate if Apple could look into this. I'm wondering if it is a recent update to iTunes or to Windows, but I don't trust that I won't be able to undo changes if I myself began looking through them (and I lack the time and expertise to do that effectively). I think there might be that Windows is detecting something in the way that Apple formats their iPod drives that it believes is an issue (even when it isn't). My guess is the way of formatting is unchanged (the iPod hadn't received an update recently to suggest and alteration to this) but maybe the things Windows is looking for may have slightly changed and disagrees with Apple's way of keeping the iPod Drive proprietary to iTunes.
TL,DR: Advice to others (and Ljchicago) searching this topic is to ignore the message for now.
Thanks,
Dixavd

There's a problem with this drive, scan the drive now and fix it

This error message is popping up when I tried to sync my nano to my new laptop. I used to have all my music on an external hard drive, but now
my music is on my new laptop. How do I fix this?

This seems to have been resolved after I upgraded to Windows 8.1. Perhaps there was an issue with the Windows 8.0 iPod driver....?

Is there a big difference between 5400 and 7200 hard drives?

I dont know which one to get. Should i upgrade to the 7200. Right now i have a 7200 hard drive in my powermac g5 and its great so would it be alot slower with a 5400 hard drive. Also to upgrade the drive do i have to order it online or can they upgrade it in the apple store?

Barefeats did some tests, and they conclude the Momentus 7200 is worth the upgrade. Also note this drive is slower than some other newer drives, so you could even get a greater advantage from other models. I've bolded pertinent information. Please note most performance increases are not seen in everyday emailing, web surfing, etc.
http://www.barefeats.com/hard56.html
Their Conclusion:
ANALYSIS
The Seagate Momentus 7200.1 takes notebook drive speed to a whole new level. It's not as fast as the fastest 2.5" (ed) 7200rpm drives but it's impressive nevertheless. And its quiet. It's a no brainer for a PowerBook internal drive replacement or as an external drive in a FireWire 800 enclosure.
WILL A 7200RPM NOTEBOOK DRIVE DRAIN MY BATTERY FASTER?
The short answer is, "Probably not." You see, the 7200rpm drives are as much as 28% faster doing random reads and writes compared to the 5400rpm drives. They are as much as 80% faster than 4200rpm drives. Yet the Hitachi Travelstar 7K100 uses the same amount of power as the Travelstar 5K100. The Seagate Momentus 7200.1 uses only 10% more power than the Momentus 4200.2. The Momentus 5400.3 uses less power than the Momentus 4200.2. My theory is that the "speed to power" ratio is so good with the 7200rpm drives that the net effect on the battery is negligible.

HT1766 I am trying to restore a new replacement phone from an icloud backup but it is telling me there is a problem with backup data. The backup was done under 7.1 and I think the new phone still just has 7.04. My itunes backup was lost last week...sugges

I am trying to restore from icloud but it appears the 7.1 it was backed up in and the 7.04 on the new phone won't allow it. My itunes library was lost last week due to computer crashing and having to be restored. I have a clean very current icloud back up done on March 21st but I cant seem to get it there. Suggestions please?

You will have to update the iPhone to iOS 7.1 if that is the iOS the backup was done in. You cannot restore a newer iOS update to a phone with older iOS. Once you update the phone, you will be able to restore the backup.

When I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run"

when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.

Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

What's the difference between thunderbolt and mini displayport?

I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks

@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt...

What is the difference between ALE and EDI

Hi,
Can any one please explain what is the difference between ALE and EDI ?
Thanks in advance.
Ramana

Hi Ramana
ALE: used to trnasfer IDOC with in the R3distributed system.
EDI: used to transfer IDOC from R3system to nonsap system
IDOCS:
IDOCS are intermediary documents which are like CARRIERS of the data
IDOCs are safe to transfer data, but less volume of data. User is not allowed to access (modify) the data like PSA. IDOCs have 3 parts.
1. Control Record - SOURCE & TARGET details,
EDI
EDI concept in SD: the EDI concept is intended to realize the sales and distribution process completely automatically with the help of electronical documents. These documents are sent from one customer to another, are processed mostly on the background and give a possibility to realize the sales process extremely efficiently.
While IDocs have to be understood as a data exchange protocol, EDI and ALE
are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to
deliver data to the receiving system.
check these links also
EDI document
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983331,00.html
http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci879631,00.html?NextURL=http%3A//searchsap.techtarget.com/ateQuestionNResponse/0%2C289625%2Csid21_gci879631%2C00.html
http://sapabap.iespana.es/sapabap/sap/faq/ale_idocs_bapi.htm
Reward all helpfull answers
Regards
Pavan

What is the difference between VK11 and VK31?

What is the difference between VK11 and VK31?
Thanks in Advance.
Nazim.

Hi,
They are the same really. VK31 came with a later SAP release and some
people say it is easier to use than VK11. In the end they are both used
for condition records.
Actually,the difference between VK11 and VK31 is that VK31,
VK32 ONLY work for standard SAP delivered Condition Types (ex.
PR00). If you create any customer specific Condition Type codes
(ex. ZXXX)you can only create / maintain Condition Records for
them using VK11, VK12.
In VK11 you can store condition record for more than one condition
type. This means you can have same condition record for different condition types.This feature is given to enhance the systems performance and not to create the duplication of the work for each condition type.
BOTH transactions allow mass entry and changes.
Regards,
Sophia Xavier

What is the difference between struts and spring framework

What is the difference between struts and spring framework
Thanks in advance

Struts is nothing more than a web MVC framework.
Spring is lots more.
Spring has its own web MVC frameworks for both servlets and portlets. I think the Struts web MVC design is inferior to Spring's.
It also has JDBC and ORM support, message driven POJOs, an IoC engine, aspects, and lots more.
Struts would be a minor subset of Spring.
%

What is the difference between GRAC_USER and GRFN_USER?

Hi,
Can any one please help me to know what is the basic difference between the two auth objects?
What is the difference between GRAC_USER and GRFN_USER.
Thanks!

Hi,
GRFN_USER is used to controls the access to perform your own or central delegation. It has only the Activity element.
GRAC_USER allows you to restrict activities based on the following attributes: user group, user ID, connector, user group, orgunit.
Kind regards,
Karolina

Would there be a problem with the warranty in the UK if bought in USA? Plus is there a big difference between US and UK keyboards? Thanks

Similar Messages

Maybe you are looking for