Problems with the Title

I have problems in creating new titles. I did alreday a few titles but now it is not possible to create new ones.
I can only press the button preview, but the update button is not active.

Hello Galfi,
the update button should only be active when selecting an already created title and thus trying to change it's settings. have you tried simply dragging and dropping the title in the desired location?
hope this helps
viva la mela

Similar Messages

Problems with the Title Option in Adobe Premiere

I am having a problem with this option because when it shows the title panel, it is very incomplete; it doesn't have as many option as it had before, such as color or shape options. It started happening when I tried to blur our somebody and pick an hoxigonal shape from the panel and a sign showed up saying that there was a problem and then the program would shut down and wouldn't open later on unless I restarted the computer. Now, it opening without any problem but the title panel is still very basic.

What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
Best,
Peter Garaway
Adobe
Premiere Pro

Problem with the Titler WIndow

Hello,
I don't know how it happened but the titler window is saparate in 2 windows : one with the title by it self and the other one with tools and buttons.
How is it possible to have only one window again ?
Thank you for your help and regards,
Daniel

Daniel,
Though I would expect it to be in Eddie's link, you only need to go to Window (in the Toolbar at the top of the GUI), choose Workspaces, and then choose one of the default Workspaces listed, or any Custom Workspaces that you might have created. Hint: once you get a Workspace set up the way you like it, do save it as a Custom Workspace. Can save a lot of time later. I have about a dozen, plus the ones that ship/install with PrPro and use them for different tasks.
Good luck,
Hunt

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
any help would be greatly appreciated, thanks

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Start-up problem with the Z10

Can you assist us in a Start-up problem with the Z10's.
I have read a lot of complains with the Z10 starting-up and then got stuck at 98% completion. No further response after that!
For any further information please check the "BlackBerry Support Forum" on this same site.
Please respond or tel me who i can contact in this regard?
Thank you
Kobus69
Subject Title and beginning of post edited to reflect new topic.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem with the progress line in MS Project

Hi there,
I have a question about the progress line in MS Project.
My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back?
It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
(Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text.
If anyone could give my some advice or the solution, that would be great!
Thanks in advance!

Hi Thunderbal66--
Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
it unless you update your project.
I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Problem with the USB-connection after upgrade to P...

Hello to everybody!
After upgrading PC-suite, I can't establish a USB-connection with the phone.
Here are the facts:
1) My phone is the E90. Latest software installed (300.34.84)
2) PC-Suite version 7.0.9.2 english. I also tried the greek version, same problem with it also.
3) Nokia Connectivity Cable Driver 7.0.2.1. I also installed manually a previous version of the driver (7.0.2.0), but this didn't solve the problem.
4) I didn't have any problem with the older version of PC-suite.
5) I don't have a problem with the cable because the data-transfer-mode works fine.
6) Prior to any installation attempt, I always first uninstalled PC-suite and Cable-driver manually with the windows-xp uninstall program. This was not the fact, only in my first attempt, where I upgraded the pc-suite from inside the program itself.
Please help, because I can't backup and this is very important for me!
Solved!
Go to Solution.

Thank you all for your suggestions but nothing of the above worked for me.
After of hours and hours of installing and uninstalling of several versions of the pc-suite I solved the problem as following:
1) Uninstall manually (windows - control panel - add/remove programs)Nokia-PC-Suite, Nokia Connectivity Cable Driver AND PC Connectivity Solution!
2) Restart PC
3) Download and install the new version of Nokia-PC-Suite.
The tricky part is that you have to uninstall the application called "PC Connectivity Solution" manually and since the title of the application dosn't include the Nokia-Name you have first to find out that this program is Nokia-related!
Once again, thanks to everybody who took the time to make suggestions and especially to cricfancy who made me aware of the fact that PC Connectivity Solution is a nokia application!
Finally, I would like to make a statement for Nokia:
People, if you are not sure about an update then keep it in beta and don't make it available to the public!!! I lost hours and hours on search and made countless installs and uninstalls to find out what was wrong. Under the line, I had made no mistakes in my update from the start and the whole problem was based on your software! This is not acceptable!

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

A VERY weird problem with the screen?!!!

Ok, first of all, I apologize for the title of the question above, it was difficult to put my problem into words.
I use the Instagram app a lot on my 3 month old retina iPad. I have pressed the little thingy on the bottom right of the screen that reads ( x2 ) and always use the app in this bigger form.
When I brows the internet or read a book I have no problem, but today when I opened a picture with a dark brown color I noticed that there are parallel vertical lines on the screen that are of a lighter shade. I naturally though it was a problem with the picture so I checked it on another one and they are still there. Very faint and hardly noticeable but THERE.
Now to the big surprise.
I realized the vertical lines are a faint outline of the Instagram app!!!!!!! The lines match the lines on the popular page (or people's accounts) where the pictures are placed in columns, the parts that are black between the pictures? Those perfectly match the faint lines on my screen!!!
Guess what.
After a few minutes of shock I noticed that there is even a faint outline of the home button too.
WHAT is this?
What could have gone wrong?
My iPad has never been dropped, never in contact with water, never over heated, never opened....
WHAT?

I don't know if that will help at all. I just didn't realize that you had it turned on, that may have nothing to do with it, but its worth a try. At least it will be something that you can eliminate.
If rebooting the iPad helped at all, you can consider resetting all settings. When you do that though, you must re-enter all of the device settings again. It's sort of a pain to have to reset all of your customized settings and it will take some time, but it doesn't erase any data. It does mean that you have to re-enter WiFi passwords, turn Siri on agai, allow apps access to location services and photos .... All of that good stuff.
I hope for your sake, thatit's just some weird anomaly going on with the screen right now and that it will correct itself. You could try closing all apps in the recents tray, restart the iPad and see if the ghosting goes away. That's harmless enough to try.

I had this problem with the folder with the question mark in it

hello guys, so i had this problem with the folder with the question mark in it and now i just keep the options button pressed till it shows me the option to boot and so how can i get that solved and my mac can just boot normally and something else is that i press on system preferences and nothing happens it basicly does not exist so if you guys could help me it would be great
<Re-Titled By Host>

It sounds like either the system on your disk drive is corrupt or the disk drive died.
Assuming the information in your profile is correct then boot from the install DVD for you MBP. From there you should be able to run Disk Utility to check out the disk drive.

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problems with the Title

Similar Messages

Maybe you are looking for