Problems with Uconnect in 2008 dodge Avenger, HELP!

Hi,
I am having the same problem with uconnect in my 2008 dodge avenger ..... When I contacted uconnect they instructed me to call apple to see what it is that I can download to my phone to make work... I mean it pairs fine ... it keeps dropping the calls from the audio system... then I call apple and they toll me that there is nothing they can do since every thing they have is up-to-date... then instructed me to get my money back for the uconnect...hahaha.. not funny at all ... between the $400.00 phone and the $800.00 part and installation for the unconnect something has got to give!!! If any1 has a solution plz contact me asap! GRRRRRRRRRRRRRRRRRR

Hi,
This may be port issue.
Check all the ports.
and disable other network adapters for time being.
Thanking You.
Gopal

Similar Messages

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Hey, I had met a problem with installation. Can any one help me?

Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Thanks

Re: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

Why I got this email if I didn't schedule any storage plan ? This is the email I got; On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me

Why I got this email if I didn't schedule any storage plan ? This is the email I got;
On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me ? I don't want to be charge for something I don't want to buy.

You may want to do couple things
1. cancel auto renewal for icloud - instructions here -under downgrade storage
http://support.apple.com/kb/HT4874
2. change your payment info in itunes, to either none or other payment method - instructions here
http://support.apple.com/kb/ht1918

Graphics problem with mbp late 2008,nvidia geforce 8600m gt.any help?

Hi,have graphics problems with my MacBook Pro 17" Late 2008.Every 3-4 days the graphics are not ok and when i want to restart there is only the apple logo but not clear and the cursor seems to be double.Sory my english is not the best.Any help for this Problem?

Get your computer to an Apple Store Genius Bar ASAP to be tested for the problem described in this article:
http://support.apple.com/kb/TS2377

Landscape Problems with Crystal Reports 2008 SP3

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290). After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape. They are loaded into a third party application that uses a Crystal Reports reviewer.
For some printers, the reports will reset to the 11x17 page size in portrait. For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option. None of this helped.
I backed out FP3.3 and that did not help. After I backed out SP3, the problem went away. It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP? I would like to see this fixed in a future patch.

My initial install of Crystal Reports 2008 was SP2 (12.2.0.290). After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
The reports are set up as 11x8.5 in landscape. They are loaded into a third party application that uses a Crystal Reports reviewer.
For some printers, the reports will reset to the 11x17 page size in portrait. For others the reports stay at 11x8.5 landscape.
The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option. None of this helped.
I backed out FP3.3 and that did not help. After I backed out SP3, the problem went away. It seems like something changed in the SP3 release that is causing this issue.
What's the best way to communicate this to SAP? I would like to see this fixed in a future patch.

Problems with Microsoft Office 2008 and 2011

Hiya,
I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the page, but I'm not comfortbale working wihtout autosave running. I deleted Office 2011 and put Office 2008 back on my machine. However, since I re-installed Office 2008, the whole OSX seems to have slowed down.
Could Office 2008 cause my whole system to get sluggish? Is there anything that I can do about it?
I am also wondering if there is there another solution to my original Office 2011 problem with footnotes that doesn;t involve disabling autosave? Has anyone else has similar problems with footnotes? I just wiped my whole system and re-installed all the programmes, so I am surprised to still be having these same problems with Office!
Thank you for any help and advice!

You should try asking your Office for Mac question in the Office for Mac forums where the Office for Mac gurus hang out.http://answers.microsoft.com/en-us/mac?auth=1

Does anyone know about the WIFI problems with the late 2008 Macbook 2.0?

I need a Macbook but I can't afford a new one. So I'm looking into purchasing a late-2008 Macbook 2.0.
In my research I came accross a review which said that they were having some problems with WIFI and attributed it to the metal case.
Has anyone heard of this problem and has anyone found a solution for it?
Thanks for your help.
Ed

Look at the box to the right titled More Like This ----------------------------------------------------->

Trying to download iOS 5 it says there is a problem with my Windows Installer Package?Help?

I'm trying to download the iOS 5 and I get almost all the way done but then it stops when it's on Status and goes to an error and says "There is a problem with this windows Installer Package. A program run as part of the set up did not finish as expected. Contact your support personnel or package vendor." I have a windows vista computer.. but it should be able to run on it...
Any ideas on how to fix this??
Thanks!!

'NOsaint09' - I was getting your same error message trying to install the iTunes 10.5 update on my Windows XP machine (in order to install iOS 5 on my iPhone 4). Tried uninstalling and reinstalling iTunes several times to no avail - same message, no install.
Well, after reading the above post by 'wiss...' i went to start Apple Software Update and was getting another (very cryptic) error message just trying to start ASU. I thought perhaps the problem with this program was causing iTunes 10.5 not to install - so I went to uninstall Apple Software Update using Windows Add/Remove Programs, and got another error message (not allowing the uninstall)!
Knowing there are programs out there just for the purpose of doing a forced & thorough uninstall, I search Cnet Downloads for the best free Uninstaller and downloaded Revo Uninstaller. Used Revo to uninstall Apple Software Update (and all associated files/data it found in registry).
Then to be sure, ran Disk Cleanup in windows to empty the Temp files/folders and Restarted the computer.
Finally, I ran the iTunes Setup.exe for 10.5 and it installed successfully!! Woohoo! I hope my experience may help others with similar troubles!
And thanks to Wiss for directing me to the problematic ASU program!

The mail application on my I-Mac dates all mail, whether sent or received, as 5th (of whatever month it is). The computer clock is working, so it's not that. And the time seems to be right. I have no problem with my MacBook. Can anyone help, please?

The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Very frustrating problem with Photoshop Elements 10 - can anyone help?

I don't know what's happened, and I haven't changed any of the settings or anything.
When I open a photoshop file I am currently working on, now, no matter what I do, nothing changes in the actual photo. Even when I delete layers to see if it reverts back to the original photo, nothing changes. When I try adding new layers, nothing happens, when I try adjusting something such as opacity, or brightness/saturation, nothing changes.
I've tried opening/creating other photoshop files and I have the same problem, so it seems a problem with the actual software, rather than individual files. Even after uninstalling then installing the software, the problem is still there.
Does anyone have any idea what is causing this? Or could you direct me to a good help forum/source?
Many thanks

Welcome to the forum.
I would go to the Photoshop Elements Forum, and look for Loraclf's post there, or post with your problem, your equipment info, and the problem. Someone there will be able to help you.
Good luck,
Hunt

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

There's a problem with my Asha 200. Please help.

my asha 200 has totally been disorganised,the social apps nolonger works and i can nolonger access the internet using my phone,the homescreen is faulty and some apps keep freezin,i tried to update the software but it tells me no software and no software provider available؛pliz help
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

Ashtin123 wrote:
There's a problem with my pervious purchase..
Then you need to Contact iTunes Customer Service
Use this Link > Apple Support iTunes Store Contact

Problem with I-trigue 5600 . Please help!

hi,
My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
Can I replace my sub to similar from another speakers system and which one would be suitable.
I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
I wanted to buy x-fi elite pro ,but now it's pointless.
Please help me
Despere Makary

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Problems with Uconnect in 2008 dodge Avenger, HELP!

Similar Messages

Maybe you are looking for