Problems with Vista Contacts (partner problems :P)

I don't think I had any problems with the previous version of Nokia PC Suite to transfer my Vista Contacts. But that version did not support pictures (which I really wanted to have). So I upgraded to 6.83.14.1 which supports pictures. Though first of all pictures seems to be kind of buggy and refuses to transfer the contact if the photo is too big (have no idea if it's dimensions or size though).
But my prime problem is that it refuses to transfer some of my contacts. I tried to find some connection between those that didn't transfer and found that all of them seems to be couples where only one of the partners transferred. They have the same address etc. (though mobile numbers can differ). But strangest is that my parents have both been transferred (and they to share everything except mobile phone numbers). Oh, and all have pictures too.
Does anyone have any ideas how to solve this? Any help is appreciated.

hi. i had the same. but try this (works with me):-
open pc suite, synchronisation, then click settings.
pc application click create new, then instead of vista select "outlook express (windows address book) " then next page select default.
this should do it for some reason. now ALL my contacts have synched instead of half of them.

Similar Messages

PC Suite not syncing with Vista Contacts

OK, somebody PLEASE help!
Here's the vital info:
Windows Vista Home Premuim
(no Servict Pack listed)
PC Suite Version 7
Nokia XpressMusic 5310
Connected via USB
Set to sync to Windows Calendar and Contacts
However, when I sync, I DON'T see ALL the contacts in Windows Contacts. They are visible from my PC Suite phonebook folder, but don't sync to my computer.
I see most contacts, just not all.
These contacts are NOT set to private. They are NOT being saved to the memory card. Some do have special characters(. @) but if I take those characters out, they STILL DON'T sync.
I've tried to find answers before, but no luck. ANYONE OUT THERE?

HI ohjones,
Please look out for contacts does it contains "\" symbols too on your phone, if so, kindly remove all the specail characters from your contacts and then try, as i do faced these sort of problem earlier
YOu can view following link too

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Webcam problems with ONE contact

Im not sure if this is this is the right place for this post but im running out of options and i am getting desperate!
Here is the situation:
I have a mac book pro laptop running os x 10.5.6.
I am trying to use my webcam and chat with a contact, the webcam is set up and works with all other contacts accept this one contact.
On My macbook pro - I have used IChat with AIM to try to video conference with the contact, and i get an error message, saying that the contact is in another conference (which they say they arent). On their side they say that the conference was declined from my side.
I Also experience a similar problem on my pc using msn messenger... I can view my contacts webcam, and all other contacts webcams, and I can send my webcam to all other contacts... but the one contact, the screen goes white, and the connection times out?
I am assuming this would be a problem with the one contacts router or firewall? but what could it be? they say the firewall is disabled ...
But if it were a connection problem would I be able to view the contacts webcam?

Hi,
This could be several issues.
If it is Mac to Mac then it is likely to be a feature of their Modem such as Denial of Service or Internet Ping blocking (not responding to Internet Pings).
If it is Mac to PC then the Windows firewall should be On but the app allowed as an Exception Written for XP Service Pack 2 but applies to Vista as well.
There is a chance that it is about whether they have opened the ports iChat (or their App) needs in their router or modem. Most only have port up to 1024 open.
the device(s) can act as a hardware firewall if they are not open.
Ports to cover iChat 3 and 4
AIM uses port 1024-5000 in addition to Logging on on port 5190
8:28 PM Thursday; January 15, 2009

When I click on an email address on a web page, a page no longer opens in my email program. Not sure if this is a problem due to Firefox or due to recent installation of Office 2010. I use a PC with Vista.

When I click on an email address embedded in a web page, a page would open in my email program with this address in the "To" line. I recently installed Microsoft Office 2010 and now when I click on an email address nothing happens. I am not sure if this is due to Office 2010 or a Firefox problem. I use a PC with Vista.

https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Problem with Photostream on a PC with VISTA

Problem with Photostream on a PC with VISTA
I have latest Vista SP installed. I installed the download for ICloud for Vista Control Panel. I followed Apple's instructions and am unable when I snap a picture to have it downloaded on my PC to the default directories.
I have done a iCloud backup a couple of times.
I have changed the directory destinations, turned off my firewall, and still not getting the pics on my PC.
Help is appreciated. Thanks..

Well, the problem has been partially solved. When using the free Camera Plus app, all works as it should. All pics that I take download successfully.
Does this mean that the the Apple Camera app is defective?
How do you fix this app, cannot be deleted on the IPOD.

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

Photoshop elements 6 with vista - transparency problem

I just installed Photoshop Elements 6 to my new laptop which has Vista. I used Photoshop Elements 6 previously for digital scrapbook layouts on my old computer that had XP. In XP when I dragged a element that had a tranparent part onto my layout the tranparent part (was grey and white checkered before I put it on the layout) was invisible like it should be. When I do the same thing on my laptop with Vista the part that should be transparent shows up gray. Please help!!

That's pretty interesting because you should have had the same problem in XP, if I'm understanding what you're saying. You should be able to drag from the layers palette in either operating system, but you can't drag from the project bin in PSE 6 and 7 the way you can in earlier versions. That creates a special kind of pass through layer intended for use in a photo book.
Are you sure you weren't dragging from the palette in XP and from the bin in Vista?

Airport Express problems with Vista

I have read on here that people are running the express with Vista an I am not sure how? I loaded the disk and everything come up but the Airport setup assistant. When I open the Airport asmin utility it is blank. I am not sure how to get this up and running any help is appriciated.

I have the exact same problem trying to connect my Airport Express to my Vista laptop. I managed to get around it by using the Admin Utility, choosing "Other..." and then entering the router IP (for me 10.0.1.1) and password "public".
However after I have enabled WPA2 Security the connection does not work that good. After a short while throughput is degraded and then it drops the connection completely.
Is Airport Express supposed to work with Vista or what am I doing wrong?
HP Pavillion Vista Other OS

Sound problems with vista 32 bit on xfi xtremegamer

hi im havin sound issues with my sound blaster xfi fatality xtremegamer on vista 32 bit. the sound will sound like a skippin cd or sound like it is stuterin for a few seconds than it will play fine than do it again later on. i was wounderin if its a driver issue with vista or my sound card has broke? i had it runnin on xp and had no problems. can anyone help me please as my card is only abot 8 months old so if it could be faltiy i am still covered by warrinty.

I don't know if it's the driver that's causing a problem or if it's one of your components that's causing a problem. All I know is that the X-Fi is working great on my system, both in XP Pro and Vista Business. I'm not 100% sure about this, but I think I installed the driver first and then the software from the leaked Vista Suite that I downloaded from a link in a post on this forum. Never had a problem with any of the previous drivers either, but on the other hand this system was built in november/december last year, so the hardware was fairly new at the time.

Connection problems with Vista

I have problem using my Nokia 5320 as modem with Vista (with TIM as mobile provider).
The connection, very often, is lost. Even if the symbol "3.5G" is still on the phone, Vista looses
the internet connection.
Someone says that is a Vista DHCP problem for mobile connection.
Could you, please, help suggesting some solutions?
Thanks and regards

Hi All,
I have checked again and the IP remains set when the internet is lost. (USB connection, no globe icon on the network monitor status) However the system handles the connection in strange way with DHCP for sure. I do not really familiar with it, so it could be normal as well.
I realized the communication loss is related to the baud rate change (increase) of the USB modem under the internet connection period (depends on the throughput of the actual 3G, 3.5G connections). I tried to set various details, parameters under modem settings but without any real success. It looks like the OS cannot really handle the HSDPA modem in the phone. Does not really know the exact working parameters of it.
Maybe I am wrong, I only guessing and trying to solve the issue, because it should work smoothly as works under Linux.
Any idea from an expert?

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Have Linksys WRT54GS Got a new laptop with vista having problems

I have been using this wireless router for a while works great. I got my wife a new laptop with vista can conect with limited conectivity (excelent signal). Can not use any online programs. How do i fix this problem?

"limited connectivity" ca be due to incorrect n/w key u r typing.
if u have an securtiy enabled conection, when u r trying to connect on vista laptop, plz type the correct n/w key.if there is any confusion oen setup page and chck the ifo from there.
if this doesn't work, u mght have to upgrade f/w of WRT54GS from www.linksys.com as win vista sometimes requires the latest f/e and drivers to connect properly

Problems with MobileMe contacts sincyng

I'm a MobileMe, Mac and iPhone user and I usually sync all my data with no problem However for some reason I cant sync my contacts in my Mac with with my contacts in MobileMe. Also I find some of my contacts names overwritten with other names in MobileMe. Can anyone help please?

Hi Chris, Thanks for the advice, I haven't tried that yet. Will do so and pray that it will work. This however doesn't solve the problem of appointments I'm putting on my iphone not updating on PC and laptop - they do however update on mobile me cloud! Any advice greatly appreciated!

Problems with Vista Contacts (partner problems :P)

Similar Messages

Maybe you are looking for