Problems with webtop groups and/or replication

Hi,
i use sgd 4.2 (4.20.909) with to array members. I have the Problem, that the webtop group informations get lost every few hours. And the Users have to set it up again. We have over 1.500 Applications and over 1.500 Servers integrated in our ens. The only error message i get is:
2006/09/29 17:06:03.675 (pid 1927) server/replication/error #1159542363675
Sun Secure Global Desktop Software (4.2) ERROR:
There was no response from the server itosgdapp2p.hn.tds.de after
300000 milliseconds during synchronization of the
namespace "diskens".
Replication with itosgdapp2p.hn.tds.de will not operate.
Check the server itosgdapp2p.hn.tds.de and restart it if necessary.
2006/09/29 17:06:03.695 (pid 1927) server/replication/error #1159542363695
Sun Secure Global Desktop Software (4.2) ERROR:
There was no response from the server itosgdapp2p.hn.tds.de after
300000 milliseconds during synchronization of the
namespace "views".
Replication with itosgdapp2p.hn.tds.de will not operate.
Check the server itosgdapp2p.hn.tds.de and restart it if necessary.
Could this be the problem? Can I increase the timeout value for synchronization?
Thanks for help
Regards
Lukas

I cannot give a direct answer since I haven't been across this problem, therefor I have some questions.
<quote>
i use sgd 4.2 (4.20.909) with to array members. I
<quote>
Is this a typo and should be 'with two array members' ?
You state that you have over 1.500 Applications and over 1.500 Servers. How is the use of these applications. How many concurrent users are connected.
Does the same error exist when seperating the two zones over two systems?
What does '/opt/tarantella/bin/tarantella config list --array-resourcesync' state?
From the manual:
Resource Synchronization
--tuning-resourcesynctime time
At what time to start resource synchronization each day, if enabled for the array.
Use the server's local time zone.
Express the time in 24-hour clock format, for example "16:00 for 4pm.
Changes to this attribute take effect immediately.

Similar Messages

Problem with Field group and layout generation

Hi,
Previously we customized the field group OPP_DISPLAY_SEARCH_RESULT_50 using transaction CRMC_BLUEPRINT_C ( for accplication CRMD_BUS2000111) for our own custom view and the whole thing worked smoothly. However while changing the layout (adding and taking out some field) I came across issues. I am pretty familiar with PCUI and have done some work on this previously. However this time generating and regenerating this field group ( AFTER some changes) has no effect when the PCUI gets executed with that particular view...
I have used crmc_pcuitools to confirm that the field group in question is the one mentioned aboveand since its not contained in any reference grp, generating the layout for only this field group should be sufficient. However this generation doesn't take effect at all when the PCUI IS EXECUTED. After the generation I made sure that the table CRMC_LAYOUTC does contain generated layout entries for the respective views etc..
I have also created a test view and completed the similar customization and it didn't work as well. We are at CRM version 5 with SP6. Previously ( around 7,8 month back) the whole procedure worked fine..
Am I missing anything..
Thanks

Hello,
What are you trying to modify?
If it is the search result list, it should be OPP_DISPLAY_SEARCH_RESULT_50 that you have to regenerate with the correct view and field group variant.
If it is the information tab, it s OPP_OVERVIEW_50 that needs to be regenerate.
Regards,
Frederic

Strange Problem with Code Groups / Codes

Hey all, have a strange problem with Code Groups and Codes.
Our data migration team accidentally loaded an early version of our catalog (code groups and codes) in to our 'Gold' configuration client. They then proceed to delete them all via transaction qs41. However, the code groups have been deleted, but not the codes.
So, basically, no codes groups exist in table QPGR or QPGT but all the entries remain in QPCD with the assigment to code groups. The usage indicator is not set on the codes so why they did not get deleted with the codes groups is unknown.
The issue that this is now causing us is that we can't recreate the codes groups with these codes assigned as the system thinks they already exist (via a check on table QPCD i would expect).
Also, i have been unable to recreate what happened did in other clients... seems very strange.
Any help appreciated.
Cheers

Ben,
You could try SE11, and see if you can delete the records from there.. but I'm not hopeful...
Otherwise you may need to write a quick ABAP program to delete the data base entries.
PeteA

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problem with checkbox group in row popin of table.

In table row popin I have kept Check Box Group.I have mapped the texts property of checkbox group to the attribute which is under the subnode of the table.the subnode properties singleton=false,selectioncardinality=0-n,and cardinality=0-n.
if there are 'n' number of records in the table.each record will have its own row popin and in the row popin there is check box group.
the check box group in the row popin belongs to that perticular row.
but the checkboxegroup values in row popins of all the rows are getting changed to the row which is lead selected.
The same scenario (table in the row popin is showing the values corresponding to its perticular row and all the table values in popin are not getting changed to the one lead selected in the main table)is working fine with the table in place of checkbox group in row popin with datasource property of table binded to the subnode
I cant trace out the problem with checkbox group in place of table.
Please help me in this regard.I have to place check box group in place of table in row popin.
Thanks and Regards
Kiran Kumar K

I have done the same thing successfully with normal check box ui element. Try using check box in your tabel cell editor instead of check box group.

Problem with Data Model and Analysis View

I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
        at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
        at java.lang.Throwable.<init>(Throwable.java:196)
        at java.lang.Exception.<init>(Exception.java:41)
        at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
        at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
        at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
        at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
        at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
        at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
        at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
        at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
        at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
Thanks

I follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks.

Problems with dinamic group

I migrate the messaing (6.1) and directory(5.2), in the directory migrate the user and group, but i have problems with a group, i send a mail and the user who have menbers no send the mail, and retunt the mail .... and said
Direcci�n del destinatario: [email protected]
Motivo: you are not allowed to use this list: [email protected]
it a dinamic group

Your group must have a restriction on it, that only certain users are allowed to send to the group. If you are not on that list, then you will be prevented from sending to the group/list.
Why don't you examine the ldap entry for the group, and see what's in there?

Browser compatibility problem with t:selectOneMenu and JavaScript calendar

I'm having problem with <t:selectOneMenu> and JavaScript calendar on IE. It works fine on Firefox but doesn't work on IE.
The JSF code is as follows:
<tr>
                                   <td align="right">
                                        Archive Date
                                   </td>
                                   <td align="left" colspan="3">
                                   <table cellpadding="0" cellspacing="0" border="0">
                                   <tr>
                                   <td>
                                   <span class="tuny_text">After (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateAfter" value="Archive Date After" rendered="false"/>
                                        <br/>
                                        <t:inputText required="false" value="#{nonItemImageSearchPage.stringArchiveDateAfter}" name="txtArchiveDateAfter" id="txtArchiveDateAfter" forceId="true" styleClass="inp" style="width: 128px">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateAfter" name="dtpArchiveDateAfter" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateAfter" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   <td>
                                   <span class="tuny_text">Before (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateBefore" value="Archive Date Before" rendered="false"/>
                                        <br/>
                                        <t:inputText value="#{nonItemImageSearchPage.stringArchiveDateBefore}" name="txtArchiveDateBefore" id="txtArchiveDateBefore" forceId="true" style="width:128px" styleClass="inp">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateBefore" name="dtpArchiveDateBefore" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateBefore" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   </tr>
                                   </table>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpBackground" value="Background"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpBackground" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.backgroundId}" styleClass="inp" style="width: 150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                        <s:selectItems value="#{nonItemImageSearchPage.backgroundPrefsList}"
                                                  var="backgroundPrefs" itemValue="#{backgroundPrefs.id}" itemLabel="#{backgroundPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpTheme" value="Theme"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpTheme" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.themeId}" styleClass="inp WCHhider" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.themePrefsList}"
                                                  var="themePrefs" itemValue="#{themePrefs.id}" itemLabel="#{themePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpSeason" value="Season"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpSeason" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.seasonId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.seasonPrefsList}"
                                                  var="seasonPrefs" itemValue="#{seasonPrefs.id}" itemLabel="#{seasonPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpClothing" value="Clothing"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpClothing" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.clothingId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.clothingPrefsList}"
                                                  var="clothingPrefs" itemValue="#{clothingPrefs.id}" itemLabel="#{clothingPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpToy" value="Toy"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpToy" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.toyId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.toyPrefsList}"
                                                  var="toyPrefs" itemValue="#{toyPrefs.id}" itemLabel="#{toyPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpJuvenile" value="Juvenile"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpJuvenile" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.juvenileId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.juvenilePrefsList}"
                                                  var="juvenilePrefs" itemValue="#{juvenilePrefs.id}" itemLabel="#{juvenilePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right">
                                        <h:outputLabel for="drpGroup" value="Grouping"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpGroup" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.modelGroupingId}" styleClass="inp" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.groupPrefsList}"
                                                  var="groupPrefs" itemValue="#{groupPrefs.id}" itemLabel="#{groupPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td class="left_separator"> </td>
                                   <td> </td>
                              </tr>
The JavaScript code is as follows:
<script type="text/javascript" language="javascript">
     var dtpArchiveDateBefore = new MooCal("txtArchiveDateBefore");
     var dtpArchiveDateAfter = new MooCal("txtArchiveDateAfter");
     window.addEvent("domready", function(){
     $("dtpArchiveDateBefore").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
     /*$("txtArchiveDateBefore").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
    $("dtpArchiveDateAfter").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
   /* $("txtArchiveDateAfter").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
     </script>When the calendar is above t:selectOneMenu, it doesn't show up on t:selectOneMenu area. Could anyone help me solve the issue?
Thanks
Rashed

There are dozens of CSS attributes that can (and have to) be handwritten. Trouble with them is that, like text shadows, they don't appear in all browsers. I have nine different browsers installed and test pages in ALL of them before I "finish" building site or page for a template.
I try to build for Firefox, out of personal preference for it, but I have to do things that work with IE because it still holds the market share (46%IE to 42%FF), and I will only go with designs that work in IE, FF, NS, Opera, Safari, and Chrome.
As to your questions.
1. The compatibility check is most likely current with the time of the build. I don't know if that component updates as browsers do, but I'd tend to think it doesn't. I'm using CS4 and there haven't been any updates for it in nearly a year. Firefox has released 4.0, Opera released 11, and Safari released 5 since then. The updater would have found and downloaded something if it was available.
2. I could only guess. Text shadows DON'T show up in design view (or in IE) but they do in browser preview. It's just a UI quirk, and it means "trial and error" is the onyl way to get what you want.
3. The quick-selects which are in DW dropdowns or popouts are the ones most common to CSS designs and have been proven to work with all browsers at the time of release of your particular build of DW.
Hope that helps..

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problems with webtop groups and/or replication

Similar Messages

Maybe you are looking for