Proces order release not possible/Release rejected

Hi PP Guru,
While process order release the system shows error that the order release not possible / release rjected.
pl tell me what r the possibilities to be check to resolve above problem.
Bye
subhash

The Possible reasons could be one of the following -
Missing Parts - Some of the components required for the order may not be available
Missing Capacity - Capacity required for the order is not available
Error in Cost calculation
Error in Batch allocation to the component materials
When a process order is release some of the functions are carried out in background like Creating a reservation, material availability check, capacity check, precosting......
If something goes wrong in one of the step the order may not release.
Please check the logs during release it will have the clear message.
Hope this helps you.

Similar Messages

  • Po release not possible

    [Re: po release is not posible].I have tried this link but didnt work anything.Plz Suggest.I tried deactivating exit .tried all release tables.but didnt work cl24n checked throght all end.

    Hi,
    For issue " PO release not possible  ", you have folowing causes and options are
    Option=>1:
    The PO you are trying to release is created before setting of Release strategy in the system, so you are getting message when you trying release PO.
    After setting release procedure for PO,now  to trigger release strategy for old  PO, you can go to change mode of PO(ME22N) and change quantity/pur. group/any changes in release value ,(change any release VALUE) & how PO triggering release strategy.
    Option=>2:
    After setting release procedure for PO, you may not getting "RELEASE  TAB" in PO header, so check the assignment of release class to PO release group.( you can use ONLY one release class for PO, you should not have more then one release class for PO and assigning to different release group)
    Option=>3:
    Check release strategy, some release vALUE, kept BLANK, so release strategy not triggering in PO.Can be cross check in CL20N/Cl24N for release strategy with release group and release class.
    Regards,
    Biju K

  • Document is in transfer for purchase order.Creation not possible

    Dear All,
    We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
    We are taking this problem in production as well as in quality systems also.
    What are possible reason and how to solve it.
    kindly share your views.
    Thank you.

    Hi yshu,
    use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
    The double click the status record to see the exact cause of the failure.
    Rectify the error. Then try to execute the IDOC from BD87 tcode.
    For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
    There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
    Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
    Then post a new confirmation in SRM.
    There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
    Rgds,
    MJ

  • Document in transfer for purchase order - creation not possible

    Hi Experts,
    we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
    any inputs are appreciated
    Rg
    sam

    Hi All,
    We have resolved the above problem.
    When user does confirmation ,if it sucessfully  created then there will be  no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
    So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
    Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
    Thanks to all the ppl who has replied
    sameer

  • Release not possible

    dear expertrs
    today we create one pr, that pr is not possible to to release the message is come as below
    Purchase Requisition cannot be Released.
    but we choose material group, purchase group, plant, document type, everything is properly even though above message come.
    even when we run thr transaction code me54n before enter any pr that message is come.
    what is the solution
    thanks

    Hi,
    The CL30N transaction is useful when checking to see if a release                
    strategy is been found or not when entering the characteristic values            
    that you have used to create the purchase requisition.                                                                               
    You need to enter in the release stratey class that you use for the              
    purchase requistion release strategy, this can be found in your                  
    customizing. The class type is always 032 for release strategies.                
    Click the find button to search for the release strategy.                                                                               
    One release strategy should be found, if so then this is a good sign.  
    I would advice you to check the FAQ note 365604: Release strategies in purchasing, especially parts 1. a) and 2. e), and also the note 371667.
    Regards,
    Edit

  • Sales order costing release not possible due to Goods in transti account

    Hi,
    Business introduced Goods - in - Transit (Balance sheet account), so PGI will always post to GIT and Invoice it will get reversed.
    For one of the Configuratble material (MTO) scenario we need the Sales order cost estimate to get the Planned cost.
    When i try to execute the sales order cost estimate it says cost element doesnot exist for GIT GL (WHich is right).
    But with maintaining the GIT how to achieve the sales order cost estimate.
    Can you please help me in this regards.
    Thanks,
    Sudha

    Hi Ajay,
    I have created GIT (B/S) account with CE category 90.
    but in sales order cost estimate getting message " inconsistancy in CE category" CE category 90 is not accetable it should be either 01/02
    can you please help to move forward on sales order cost estimate with GIT account
    Thanks,
    sudha

  • Sales order qty not possible to change.

    hi experts
    i have created a sales order with suppersession material  for 2 qty and we deliver only 1 qty to customer.
    now i want change the sales order qty 1 so that status gets completed.
    but in VA02 material qty is in hidden mode cant possible to make changes. this is happening with suppersession material only.
    need your support
    thank you

    hi dear
    thanks for the reply again
    schedule line is also in grey mode. cant possible to make changes.
    let me add on this
    when we create order suppersession material entered with item cat. TAPA which generate automated second line item cat TAN. when we make delivery TAN gets copied in the DO and Billing afterthat.
    but issue is once delivery created. in VA02 order oty field (KWMENG)  become in grey mode. cant possible make any changes ?
    i have checked both the item categories completion rule which is (not relevent for completion)

  • Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

    Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
    There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
    The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001  904  1110500002  does not exist (Check your entry)"
    This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
    I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
    Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
    Please advise on how this process should happen.
    Regards.

    Hi TQ,
    Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
    Can you elaborate more in detail how you solved your error few months ago?
    Thanks and regards

  • Release notes and release date of SAP MDM 7.3?

    I am looking for information regarding new features and release date of SAP MDM 7.3. Can somebody help me out?
    Best Regards,
    Hannes Broströ

    Please check the following link for 6. Outlook SAP NetWeaver MDM 7.3 -
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c03bbeb6-dd5b-2d10-7bb6-85655f343760?quicklink=index&overridelayout=true
    Thanks,
    Shambhu.

  • Process order deletion not possible through PRARCHP1but can do in COR2

    Hi Guru's,
    I want to set Process order status to DLFL through program PRARCHP1 but getting message as "there are no Log messages" however I am able to set deletion flag through COR2. It appears strange to me. I am try to set to DLFL status for TECO orders. Could you please suggest How can I set DLFL to eligible process orders? (Pls find attached selection screen details)
    Regards,
    Uday

    Hello
    Check the following information from question 10 of FAQ note 540834:
    Question:
                  During the initial archiving run (when you set the deletion flag and/or the deletion indicator) or during archiving, the system does not process all of the orders that correspond to the selection criteria. Why?
    Answer:
                  Note that, in addition to the selection criteria, the residence times from Customizing of the order types (transaction OPJH for production orders and transaction CORN for process orders) is evaluated. In this case, the residence times have the following impact:
    Residence time 1:
    The time interval (in calendar months) that must elapse between setting the deletion flag and setting the deletion indicator.
    Residence time 2:
    The time interval (in calendar months) that must elapse between setting the deletion indicator and archiving (writing to the archive and deleting).
                  In addition, note that orders without delivery dates are not processed if a delivery date overrun or an interval for the actual delivery date is specified.
    BR
    Caetano

  • Order settlement not possible for investment order.

    Dear All
    We are doing the settlement for the order. settlement recever is order & we are getting the following error.
    Account 320501 requires assignment to CO object.
    Please guide me.
    Regards

    Dear Pete
    The message is as follows. Message class KI & number 235.
    Text
    Account & requires an assignment to a CO object
    Diagnosis
    You have not defined a CO account assignment for an account that is relevant to cost accounting.
    System Response
    Account  is defined as a cost element.
    This means that you must always specify a CO account assignment.
    Procedure
    Enter one of the following CO account assignments
    Order
    Cost center / cost center/ activity type
    Sales order item (for a project or cost relevant)
    Project / WBS element
    Cost object (Process manufacturing)
    Network/ Network activities
    Business process
    Profitability segment
    Real estate object
    The posting row affected is , account .

  • Production order closure not possible becasue of WIP

    Hi,
    I have a production order planned for 10 pcs
    The operations in it are not confirmed and the operation yield is 0 and the status is set to TECO. The order status show GMPS TECO RESA and the documented goods movement shows 261 and 262 for equal quntities
    user is unable to close the order as he is getting a WIP error
    Can you please direct me
    Thanks,
    SAPSriman

    Hi -Thanks a lot for your response
    It definitely makes sense.But I am unable to process KKAX KKS2 KO88 as the order has been set for deletion and the previous period has been locked. I will propose the same to my client and ask him to remove the flag and process further
    In this context I had two more questions in the same prdn order
    1. Can we set the order to TECO even if the operations are not confirmed?
    2. In the DATES/QTY Tab in the order - it has 10 pcs as Plnd order and 10 pcs as ORDER quantity. This I understand
    can you please tell me what does the DELIVERED AND COMMITTED quantity mean. In this case it is 0 against delivered and 10 against committed
    Thanks,
    SS

  • Set Deletion Flag for Process Order is not possible due to status ORRQ

    Hi Guys,
    I need to mark some process orders for deletion, but the status ORRQ (order record required) is blocking me. I've read some SAP Documentations and SAP Notes and it's recommending run tcode COPA to store the order records. A
    Although the Process Order is appearing there to be stored, we I execute store process it gives me a message that "Zero Orders were stored".
    So, can you help me on this?
    Thanks.
    Pérsio Kojima

    Hi Pérsio,
    Check In Customizing whether the order type has been set up for storing in T code COR4 (order type-dependent parameters, Master data tab page, Order record required indicator).
    IF the option is selected, the system will not delete the record directly. The order record must be archieved and then deleted.
    based on this either you can de activate the option or archive before deletion.
    Hope this answers your question.
    regards,
    Pradeep.

  • Is it possible for us to configure that deletion of a sales order is not po

    Hi Guru's,
    Is it possible for us to configure that deletion of a sales order is not possible? The requirement is that Sales Order should not be allowed in the SAP to be deleted from the system, and user should not be able to do it.
    Please let me know, if this is possible and what is the way to do it.
    Points will be awarded.
    Regards
    Amit Shrivastava

    Hi Amit
    Better approach Basis Guys to create user profiles and Roles to the users
    In SAP its not able to delete the sales orders permanently.
    So, its better to create User Profiles and Roles for the user to access the list of Sales orders
    Creation of User Profiles and Roles in T-Code--PFCG
    Regards
    Srinivas.

  • Oh the irony! Dreamweaver 13.1 release notes page

    Hi,
    I'd noticed some issues with the cursor in code view and ended up on the Dreamweaver 13.1 release notes page (http://helpx.adobe.com/dreamweaver/release-note/ccm-release-may-2013.html). I clicked on the 'known issues' link and it takes me to an error page, so I thought I'd notify you about the issue with your known issues page
    Cheers!
    PS: Good to see you're working on the cursor issues!

    Yes it's also a "known issues"
    <http://helpx.adobe.com/dreamweaver/kb/known-issues-dreamweaver-cc.html>
    You have to wait until version 13.2 comes out before Christmas .
    I don't use CC so didn't have the need to refer to it.

Maybe you are looking for