Process Admin - Engine configuration - MSSQL error
Hi,
In ALBPM 5.7, I tried to create engine setup in Proess Administrator. I am using MSSQL server db and MSSQL 2005 microsoft driver. While starting the engine, I got the following error
Invalid object name 'PPROCINSTANCE'. com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'PPROCINSTANCE'. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError ........
Unable to fix this error. Kindly help
Hi,
Usually you get this error only when the database and database tables for the engine have not been created correctly.
I could be wrong (frequently am), but you might want to verify that you created them. Know you probably know how to do this, but in the 5.7 Process Administrator -> click the engine's name -> Manage Database -> and create the database and data structure using "sa".
Hope this helps,
Dan
Similar Messages
-
[Integration Engine Configuration Data] Error: No access to system landscap
Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
- We use http port for corresponding Integration Server.
- Business System with role 'Integration Server' created correctly in SLD.
- T-code SLDCHECK is all OK.
- T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh VoPlease can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283 -
BPM 10.3 Process Admin Engine Settings
Hi
In BPM 10.3 in the Process Admin console there are a series of engine settings that users can modify, inparticular under the Execution tab there's a section called Automatic Execution where an 'Interruption Retry Internal ' value can be set.
So I'm just trying to understand the impact that will this have on the on process behaviour?
Documentation is limited, but I can only assume that this value relates to the retry internal when you attempt to interrupt a process instance.
Does anyone have any experience / knowledge good or bad with relating to this setting?
ThanksHello -
>
Please note that the information below is specific to BPM engine running on WLS.
1) At startup, BPM engine tries to connect to the JMS server.
1a) If the service is not available, it fails and stops the Global Automatic JMS Poller. A restart of BPM engine is required.
1b) If the service is available, it starts consuming messages.
2) When BPM engine is running if at some time the JMS connection goes down, BPM engine tries to reconnect to the JMS server every minute up to 50 times.
2a) If the connection can be reestablished, JMS Poller starts processing messages
again.
2b) If after the 50 retries the connection can not be reestablished, BPM engine logs
a severe message and stops the Global Automatic JMS Poller.
>
BR,
Justin. -
Process execution engine execution error. from the latest HF in BPM Ent.
Hi All,
After applying the latest hotfix, I'm now getting this error when trying to launch any of the application.
My setup is AquaLogic BPM Enterprise 6.0.4 for Weblogic.
I've tried redeploying all the deployments within Weblogic and also the Admin Center. Nothing has worked.
Any idea what's causing this?
Process execution engine execution error.
Caused by: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
fuego.papi.impl.EngineExecutionException: Process execution engine execution error.
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:158)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
at $Proxy154.runGlobalActivity(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: java.lang.NoSuchMethodError: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
at BT_QW.MyProcess.Default_1_0.Instance.writeObject(Instance.xcdl)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
at fuego.server.ProcInst.getComponentData(ProcInst.java:780)
at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2793)
at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.createInstance(JdbcProcessInstancePersMgr.java:1018)
at fuego.server.persistence.Persistence.createProcessInstance(Persistence.java:669)
at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1810)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2708)
at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:1036)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.runGlobalActivity(EJBProcessControl_1zamnl_EOImpl.java:3450)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_1000_WLStub.runGlobalActivity(Unknown Source)
at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runGlobalActivity(EJBProcessControlInterfaceWrapper.java:2033)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
... 39 moreI ended up rebuilding my ALBPMDir and ALBPMEngine schemas and WebLogic server domains from scratch. When executing the process that was giving me a headache, all of a sudden I got the following error:
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 16538, whereas the maximum size is 16384. This occurs with instance '
Anyway, the sizes were not terribly far off, but I doubled the process instance size from 16k to 32k and the error went away.
Something to try on your end, perhaps.
Chris -
The maximum report processing jobs limit configured has been reached -Error
I have Created a common page that has a CrystalReportViewerControl (name of this page is ShowReport.aspx). The report name and database name that required for the report is being passed in a querystring. The database connection info is being pulled from the web.config file. All of the reports that I am dealing with have dynamic parameters and the Crystal Prompt page is automatically being created by the crystal viewer for these. Everything in my application is working fine except that when I try to access any report for the 76th. time I get the following error "The maximum report processing jobs limit configured by your system administrator has been reached."
I have already researched this error and am aware that the PrintJobLimit can be modifed to increase this limit or can be set to -1 if we need to allow unlimited connections. However doing this is not an option due to the degradation of server performance.
The other option that I have tried is to make sure I close and dispose of the report document object on the Page_unload or the page_SavedStateComplete() however on doing so even the session variable that I am using to store the originally created reportdocument is loosing all of the values it requires to display the report. The session variable is still available i.e. it is still of type report document but it has no values for any of the properties like FileName, database etc , basically for all of those properties it show an error "Invalid File Path" when viewed in debug mode.
I have already tried several approaches but with no luck. Every single time I close the originally created ReportDocument object I loose all the required values in the Session
I am using Crystal Report XI R2 , .Net 2.0 and ASP.net
Following is the code: (Any help will be highly appreciated) Thanks:
Option Strict On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports System.Data.SqlClient
Imports System.IO
Partial Class _ShowReport
Inherits System.Web.UI.Page
Private FechReport As ReportDocument
Dim strSelectedDatabase As String
Dim strReportsFolderPath As String =
System.Configuration.ConfigurationManager.AppSettings("ReportsFolderPath").ToString()
Dim strReportFileName As String
Dim strReportFullPath As String
Dim iInsertedLogId As Integer 'This variable is used to store the inserted log id for the executed report.
Dim strConnString As String = System.Configuration.ConfigurationManager.AppSettings("ConnString").ToString()
Dim strServerName As String = System.Configuration.ConfigurationManager.AppSettings("CR_ServerName").ToString()
Dim strUserName As String = System.Configuration.ConfigurationManager.AppSettings("CR_UserName").ToString()
Dim strPassword As String = System.Configuration.ConfigurationManager.AppSettings("CR_Password").ToString()
Protected Sub Page_OnSaveStateComplete(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.SaveStateComplete
If IsPostBack Then
If iInsertedLogId > 0 Then
UpdateReportLog_ReportServedTime(iInsertedLogId)
If Not FechReport Is Nothing Then
FechReport.Close()
End If
End If
End If
End Sub
Sub Page_Unload(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Unload
If Not FechReport Is Nothing Then
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
End If
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim sRptFileName As String
If Request.QueryString("database") "" Then
strSelectedDatabase = Request.QueryString("database")
Else
Response.Write("A Valid Database has not been supplied to this page")
Response.End()
End If
If Request.QueryString("ReportFileName") "" Then
strReportFileName = Request.QueryString("ReportFileName")
strReportFullPath = strReportsFolderPath & strReportFileName
Else
Response.Write("A Valid Report has not been supplied to this page")
Response.End()
End If
sRptFileName = strReportFullPath
If Not IsPostBack Then
FechReport = New ReportDocument
If Not FechReport Is Nothing Then
ShowReport(sRptFileName)
End If
Else
If (Session("oReportDocument") Is Nothing) Then
FechReport = New ReportDocument
ShowReport(sRptFileName)
Else
'FechReport = New ReportDocument
'FechReport = CType(Session("oReportDocument"), ReportDocument)
myCrystalReportViewer.ReportSource = Session("oReportDocument")
'myCrystalReportViewer.ReportSource = FechReport
End If
End If
End Sub
Public Function ShowReport(ByVal strReportFileName As String) As Boolean
Dim blNoErrors As Boolean = True
Dim crDatabase As Database
Dim crTables As Tables
Dim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
FechReport.FileName = strReportFileName
myCrystalReportViewer.ReportSource = FechReport
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
.ServerName = strServerName
.DatabaseName = strSelectedDatabase
.UserID = strUserName
.Password = strPassword
End With
Try
crDatabase = FechReport.Database
crTables = crDatabase.Tables
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
Catch ex As Exception
Response.Write(ex.Message & ControlChars.NewLine & ex.InnerException.ToString & ControlChars.NewLine)
Exit Function
End Try
Session("oReportDocument") = FechReport
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
Return blNoErrors
End Function
End ClassI have looked into Caching the report document as well. However, as you mentioned in the post it, it will only be usefull when the DB and the report parameters remain the same which is not the case in our application. We have multiple identical databases and hundreds of reports. Our users have the option of using a combination of any database and any reports, each report having numerous parameters.
Since one user can only access one report at a time. i do have cleanup code that removes the session variable used to store the reportdocument object in the page that is initially used to call the ShowReport.aspx page.
I understand now that the CR.net SDK is only good for light reporting only. Unfortunately when we started development based on all of the articles that I gathered, I didn't anticipate running to issues like this. But I guess that's the nature of the business :-). And hence there are people like you who go out of the way to answer these difficult questions.
Regards, -
INTEGRATION ENGINE CONFIGURATION ERROR
Hi all,
I configured integration server through SXMB_ADM,but i'm getting error..
Current Configuration (local):
Role of Business System: Integration Server
Client 000 is Integration Server
Corresponding Integration Server: http://xxx:yyy/sap/xi/engine?type=entry
System Landscape:
Errors No access to system landscape at present
Comparison of Current Configuration with System Landscape
regds,
vasanth.Hi Vasanth,
You are getting this error because the Pipeline URL parameter defined for the XI Business System in SLD is either empty or different than the one defined in "Integration Engine Configuration" in the TCode: SXMB_ADM.
Check the same. I hope this provides you a solution.
Regards.
Praveen -
ERROR Integration Engine configuration
hi all, i have an error. en sxmb_adm -->Integration Engine configuration y configured next parameters:
rol:Integration Server
corresponding Int. Server: http://<server>:<port>/sap/xi/engine?type=entry
When press in SL buttom, and error occure: No Access to SLD at present.
What should i Do?
Rgds
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierraall RFC ping fine.. when execute TC SLDCHECK i get this:
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_XD0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: <server>
port number: <port>
user : sldduser
Use transaction SLDAPICUST if you wish to maintain the SLD server access dat
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_XD0
gateway host:
<server>
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
In transaction SXMB_ADM-->Integration engine configuration , when i do a check get this
Current Configuration (local):
@5F@ Role of Business System: Integration Server
@5F@ Client 200 is Integration Server
@8S\QURL@ Corresponding Integration Server: http://<HOST>:<PORT>/sap/xi/engine?type=sender
System Landscape:
@5C\QErrors@ No access to system landscape at present
r
Comparison of Current Configuration with System Landscape
@5B\QOK@ Role of Business System: Current Configuration = System Landscape
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierra -
An error occurred during the processing of a configuration file.
hi,
On installation and using oracle session provider, i am getting following error.
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Line 51: <providers>
Line 52: <add name="MyOracleSessionStateStore"
Line 53: type="Oracle.Web.SessionState.OracleSessionStateStore,
Line 54: Oracle.Web, Version=2.112.2.0, Culture=neutral,
Line 55: PublicKeyToken=89b483f429c47342"
Can any one help me?
Thanks in advance
Sivamy server :
os windown server 2003
iis 6.0 -
CJS-30059 Java EE Engine configuration error
Hi,
I am installing Solution Manager 4.0 SR2 on windows X86_64/DB6.
I have stuck on forth phase from last.
Remaining phases (not yet completed) are:
- Configure System Landscape Directory
- Configure CAF
- Configure Adobe Document Services
- Prepare to install minimum configuration
Error in current phase - "Configure System Landscape Directory" is as under:
- WARNING 2008-02-09 16:57:48
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath F:/usr/sap/SM1/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX PNBSAP01:50000 J2EE_ADMIN XXXXXX" finished with return code 1.
- ERROR 2008-02-09 16:57:48
CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine.
- ERROR 2008-02-09 16:57:48 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
First I am trying again with downgraded version of j2sdk from 1.4.2_15 to j2sdk-1.4.2_12. I hope this should work. If not, is there any way, so that i skip this phase "Configure System Landscape Directory" and jump to next phase? I can configure SLD manually later-on. Please suggest is this the right approach?
Please help.
Thanks,
- GauravHI,
I think SAP recommend using J2SDK1.4.2_15. Since this windows, have your java env as >> Drive:\j2sdk1.4.2_15...
Try if this is gonna work.
Thanks, -
CJS-30059 Java EE Engine configuration error FCO-00011 The step configCAF
Hallo
trying to install SAP EHP1 for NW 7.0 Developer Workplace for AS Java (no Abap) I get the error:
CJS-30059 Java EE Engine configuration error.
FCO-00011 The step configCAF with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|
configCAF was executed with status ERROR ( Last error reported by the step :Java EE Engine configuration error.
DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Connection reset:: '.).
which is very similar to an error here from October 2008 so I ask if anyone can help?
For me under windows xp on the pc installing the two sap dvd's "SAP EHP1 FOR SAP NETWEAVER 7.0 Developer Workplace"
and "Kernel 7.01" this happens in step 33 of 37 steps.
In sapinst_dev.log just beforehand I see
"NWCallJava: Arguments passed: ROLE=CAFAdmin, ACTIONS=com.sap.caf.rt.caf.auth".
With kind regardsHi Marco
well yes it was very strange ... but it is now installed.
I think I'd better put a question into the main NW forum.
Happily I have someone here who is a genius and found out what was happening ...
1) the port 50000 wasnt useable, wasnt even in the log, but 50001 for https worked, so https:/localhost:50001 worked but http didnt;
2) a parameter "handlePromotionFailure" was used but not understood so the VM couldnt start
3) on top of that, being a huge concern, we have host names longer than the sap limit of 13 characters.
I have tried to assign you 6 points I hope it worked.
With kind regards
David -
AirPort Admin Utility - Configuration Error - no support in Support
Receive the following dialog box when opening Airport Admin Utility / Configure on my Airport Extreme. Am running OSX 10.4.11 and Apple Base Station 7.2.1
Configuration Error
This version of Airport Admin Utility does not support this base station. You can't update the software for this base station, but you may be able to make configuration changes to it. Please go to www.apple.com/support to locate a newer version of the Airport Admin Utility.
[] No longer warn me for this base station [Continue]
Cannot get out of this with the Continue option and cannot locate a newer version of the utility. Please advise, thanks.You can update to Airport Utility 5.2.1 with this set of updates:
http://www.apple.com/support/downloads/airportbasestationupdate2007002formac.htm l -
Problems with Database Configuration Assistant - Error in Process
Hello guys,
I'm getting this error when i try to create a new Database with the Database Configuration Assistant:
Error in Process: E:\ORACLE\product\11.2.0\dbhome_1\bin\orapwd.exe
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
What should I do in this case? Any idea?
ThanksPlease re-check the ORACLE_HOME variable and restart the process. This will resolve your issue.
-
ALBPM 5.7 BPM process admin issues with Oracle 11g RAC as directory service
Hi,
Setup ALBPM 5.7 enterprise for weblogic.
BPM Engine deployed on weblogic cluster.
BPM process admin (web console) deployed on tomcat.
BPM process admin uses WEB-INF/directory.properties for directory configuration.
things were fine with oracle SID,
directory.default.url=oracle://<db_host>:1521/schema=diruser,sid=BPMDB { with this, login to process admin was working fine}
But clueless, on how to configure RAC as the directory service in the above directory.properties file. Since this is a old version, no directory.xml in the installation.
Connection string:
(DESCRIPTION =
(LOAD_BALANCE = on)
(FAILOVER = on)
(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = BPMDB)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Please help how to use service name (above connection string) in directory.properties, to be able to login to process admin successfully.
Thanks in advance,
SwamyUsing admin center, able to get the string to be used in directory.properties.
FYI, the string looks like below,
directory.default.url=oracle://customURL:0/schema=bpmdirectory,customURL=jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE = on)(FAILOVER = on)(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = BPMDB.DOMAIN.COM) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC)))) -
Possible Bug in Process Admin, has Anyone Seen this?
All,
We are seeing errors when creating a new external resource for an SQL (Oracle) database in Process Admin. We are using the latest and greatest version of Enterprise for WLS. Resource definitions are disappearing after creation in some cases. Some are saved, some are not. When the ones that fail to show up are created, there is an error saying this resource already exists, even when the values are unique. I believe this is a bug. We rebuilt and redeployed the engine ear only to have an existing resource for the database disappear. Does anyone have a clue what is going on? This is related to a BAM setup.
CHeers and TIA,
IGSI'm having the same problem, and sometimes it jumps to my entire lightroom casche and I have odd images within my book. I have to go back to "Library" and get my quick collection. The other thing I notice is that the text adjustment icon doesn't work most of the time, and then when it does work, the program freezes and I need to call on my task manager to close the program. The padding controls won't stay where I've set them. If I unlink to move text down only, it stops working, and sometimes it will also freeze.
Another thing related to "Book" is I can't go back to get another image and add it to my collection once I have saved my book. It only remembers the images I used at the time I saved, so I have to start all over.
I know this is a Beta, but hopefully these things will be fixed. I think it consumes a tremendous amount of RAM, so response is extremely slow, and I have a LOT of RAM. -
IDOC to MSsql, error in mapping(Violation of PRIMARY KEY constraint)
Hi All,
I'm working with MATMAS IDOC to MSSql. My SQL structure is of 8 tables(multiple statements) with primary key. In mapping i have used UPDATE_INSERT in action field for all the tables but still im getting "Violation of PRIMARY KEY constraint" for the last table structure. first 7 tables are single occurances but the 8th structure data is coming multple times from IDOC(E1MARMM).
my 8th table structure is :
STATEMENT8 IDOC(MAPPED)
TABLE8
ACTION UPDATE_INSERT
TABLE TABLENAME
ACCESS 0 to Unbounded MAPPED with E1MARMM
Item_CD used oneasmany +splitbyvalue with MATNR
Plant_ID used oneasmany +splitbyvalue with WERKS
EAN_CAT used oneasmany +splitbyvalue with NUMTP
EAN used oneasmany +splitbyvalue with EAN11
Numerator_For_Conversion_To_BaseUOM
Display_UOM
Denominator_for_conversion_To_baseUOM
KEY 0 to Unbounded MAPPED with E1MARMM
Item_CD used oneasmany +splitbyvalue with MATNR
Plant_ID used oneasmany +splitbyvalue with WERKS
EAN_CAT used oneasmany +splitbyvalue with NUMTP
EAN used oneasmany +splitbyvalue with EAN11
Display_UOM
in test tab its fine and fetching number of times according to MARMM segments but in END to END testing its triggering an error stating that
""Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'MM_EAN' (structure 'STATEMENT8'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_MM_EAN'. Cannot insert duplicate key in object 'dbo.MM_EAN'. ""
Plz help me regarding this..Hi team,
How resolve the below error
Violation of PRIMARY KEY constraint 'PK_test'. Cannot insert duplicate key in object 'dbo.test'. The duplicate key value is (12610). (Source: MSSQLServer, Error number: 2627) ?
Thanks,
Ram
RAM
There can be two reasons
1. The insert script used is having multiple instances of the records with Key as 12610 returned from the source query. If this is the issue add a logic to include only the unique set of id values for records by avoiding duplicates. There are several approaches
for this like using ROW_NUMBER with PARTITION BY, using a join with derived table etc
2. The record with Key 12610 already exist in your destination table and your script is again trying to insert another instances of record with same key. This can be avoided by adding a NOT EXISTS condition with a subquery which will check and return only
those records which doesnt already exist in the source
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page
Maybe you are looking for
-
Creating H.264 FLV file as per Spec, does not play with Adobe Flash Player 10
1] We have developed an application to encapsulate H.264 video inside FLV container, following the "Adobe Video File Format Specifications 9". According to the specification the H.264 video data is embedded in FLV tags, as follows FLV Headers: Meta T
-
Message Data Tab Editing (Hide or Add Columns)
In SAP B1 when a Marketing Document is sent as an email from SAP in the Message > Data-Tab by default a fixed number of columns (Date, Customer, Remarks,and, Due Date) are visible and sent in the email. We would like to have the ability to Add and Re
-
Replication Queue reader stopped due to Comm failure
Hello, I have replication (subscription with updateable subscribers) (pull) running on sql 2008 subscriber with 5 sql 2000 publishers. all seem well except the Queue agent stops at loss of network connectivity. It dosen't appear to restart until I
-
Auto Extend is on , but maximum file size is 3276MB
Dear Experts, small Doubt , Auto Extend is on in my DB . it is automaticaly extending the table space when datafile is full , increment size is 10240 KB. but my doubt is what is maximum file size it is showing 3276MB . what happend if we reach there?
-
Accidentally installed RoboForm, can't get rid of it
I installed Roboform without realizing it wasn't for Mac; now I get an error message when I try to start Firefox. How do I get rid of it? (I emailed the author but haven't heard a reply, there's an uninstall program but it's an exe file so I can't op