Process Ch to be run on 1st monday every month

HI Everyone,
We have a requirement to run a PC only on 1st monday of every month.
Request to suggest solution or abap code to raise an event if that is 1st monday of the month .
Many thanks in advance.

Check if this FM helps: HRVE_GET_FIRST_LAST_MONDAY
Vishwa.

Similar Messages

How to run process chain in day of 20 and 2 every month?

Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.

Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P

Getting 1st of every month

Hi all,
Can anyone suggest me a logic for the following requriment.
How to get 1st of every month with out using '-' operator?
Thanks in advance
Cheers
Nirmal

...but don't forget to convert it back to a date, and to use 4 digit years:
SQL> SELECT TO_DATE('01-'||TO_CHAR(sysdate,'MON-YYYY'),'DD-MON-YYYY') FROM DUAL;
TO_DATE('
01-JUN-06
SQL> alter session set nls_date_format='dd/mm/yyyy';
Session altered.
SQL> SELECT TO_DATE('01-'||TO_CHAR(sysdate,'MON-YYYY'),'DD-MON-YYYY') FROM DUAL;
TO_DATE('0
01/06/2006Dates and strings are not equivalent and a date does not hold any display formatting information...it is only formatted when converted to a string either explicitly by using to_char, or implicitly using the nls settings
HTH
David

Is there any way to enter reoccurring days on iPad Calendar ie 1st `monday each month?

I would appreciate if anyone could please help. A lot of my meetings occur on 1st Monday of the Month or the Last Friday of the Month. Can you programme reoccurring days like this on iPad 2 Calendar? Thanks in anticipation. Frank

Not in the calendar app, no. However if you make the appointment elsewhere and import it into the iPad then the iPad will honor that repeat. SUch as make it in outlook, e-mail it to yourself and import it into your calendar.

We are run for dep in every month

but i am selecting for the plannaed dep run ,and iam seleting for text run also, excute the program, but dep is not running ,after iam seleting for the unplanned dep run dep is running , whty what is problem in planned dep plz exp

Hi,
Please check these ares,
1 asset class determintion,
2 what is the previous posted dep month
3 and what is fiscal year for asset accounting
these three ares will be effect at the time of dep
bye....

Schedule: How to Schedule a report to 1st Monday of the Month

Trying to schedule a report to run every 1st Monday of the Month, using 3.1, what would be the best way to do it?

Hi,
1) Click on the schedule report.
2) In Recurrence Tab select "1st Monday Of Month" from Run Object Drop Down.
3) Click on schedule.
Now report will run on the 1st Monday of Each Month.
Thanks,
Amit

Creating a simple batch job to run every month and perform a deletion

dear all;
This is just for learning purposes
I have created a simple table below
create table t1
vid varchar2(30),
quantity number(6,2),
primary key (vid)
insert into t1
    (vid, quantity)
values
    ('G1', 2);
insert into t1
    (vid, quantity)
values
    ('G2', 3);
insert into t1
    (vid, quantity)
values
    ('G3', 0);Now, I would like to create a simple batch job, that runs every month which is used to delete all vid that has a quantity of 0...How do i go about doing that. I have searched the web but can't seems to find any useful info so far..
Edited by: user13328581 on Sep 8, 2010 8:32 AM

you are missing a semi-colon in your package procedure call inside your begin ... end.
begin
dbms_scheduler.create_job
    job_name => 'jobdeletezeroquantity'
    , program_name => 'PLSQL_BLOCK'
    , job_action => 'BEGIN mfg.testpkg.deletezeroquantity END;'             <-- missing semi-colon on mfg.testpkg.deletezeroquantity
    , start_date => systimestamp
    , repeat_interval => 'freq=monthly; byday = 1'
    , end_date => null
    , enabled => True
    , comments => 'used to run a delete procedure every month'
end;should be:
begin
dbms_scheduler.create_job
    job_name => 'jobdeletezeroquantity'
    , program_name => 'PLSQL_BLOCK'
    , job_action => 'BEGIN mfg.testpkg.deletezeroquantity; END;'
    , start_date => systimestamp
    , repeat_interval => 'freq=monthly; byday = 1'
    , end_date => null
    , enabled => TRUE
    , comments => 'used to run a delete procedure every month'
end;

Schedule a job in dbms_job which should run first of every month at 14:00.

Hi Gurus,
I want to schedule a job in dbms_job which should run on first of every month at 14:00.
Job will execute a stored procedure.
With Regards,
Gopal.

gopal wrote:
Hi Aman,
My DB version is 10g but it was migrated from 9i fews weeks back.I'm aware that dbms_scheduler is very easy to use.I tried to use dbms_scheduler but the stored procedure which the job executing uses user_jobs and dba_jobs in the script to do some tasks.So, I have to use dbms_job option.
Just as an FYI for future posts ... that could have been very useful information to know up front. It's very difficult to give good advice when someone sets seemingly arbitrary restrictions on what constitutes an acceptable solution (must use dba_jobs) with no explanation of the reason for said restrictions.
I used trunc(LAST_DATE(SYSDATE) +1)+14/24 to schedule the job.
Thanks Aman.. I follow your blog :)

Process Chain - Decision Step - 1st Day of Month

Hi All,
I have a process chain decision that detemines if it is 1st of Month,
1st Line
Command -> IF
Formula -> WORKINGDAY_MONTH( Current Date, 'IE', '' ) = 1
then
Event - > Option 1
2nd Line
Command -> Else IF
Formula -> WORKINGDAY_MONTH( Current Date, 'IE', '' ) <>1
then
Event -> Option 2
3rd Line
Command -> Else
then
Error.
However, this month it has failed to work correctly. It was sucessful on 1st Jan, but it is also triggering Option 1 on 2nd, 3rd & 4th Jan. Can you help me to understand why it is doing this?
Thanking you,
Michelle

Thank you Npathak,
The process chains should run everyday therefore I don't understand how this would affect the process chain.
This is just a decision step at the end of the Daily Meta Chain, where if it is the 1st of the Month, it will continue and process a DTP for Stock Balances. The problem I have is that for the last 3 days, it has continued to process final step eventhough it is not 1st of Month.
For info; When I check the decision logic in the variant, I can see that the date that is being used in syst-datum.
Have you any other ideas?
Thank you,
Michelle

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop a process chain when its running?

Dear Experts,
How to stop a process chain when its running? is it that a chain can be stoppend when we open an info package of that chain ?
Thank you,
Raj

Hi,
Goto the main menu process chain --> choose the remove from the Schudule...
Regards
sathis
I hope it helps to u... please assign the points

Use of Process type Attribute Change Run and Rollup in Process Chaning

Hi SAP Gurus,
I have a doubt about the use of process types Attribute Change Run and Roll up in PC
If any1 can clear my doubts it would be helpful
if possible if any1 can tell me about the list of process types available in Process Chains it would be helpful
Thanks in advance

Change run process is used to re-activate the Attributes after changes
Roll up process is used to refresh a target (example : aggregates) after new data are uploaded into a Cube

How know 1 of 18 process in lookout is run or not?

How know 1 of 18 process in lookout is run or not?
I've use monitor object, but some times work some times not. I try with absolute adress, relatif adress,
computer adress...
tanks for your help

You can use the built in Lookout functions qgood and qbad such as:
EXP_Process_Running= new DelayOn (qgood(\\ComputerName\ProcessName\FolderInProcess\Object), 00:30);
EXP_Process_Stopped= new DelayOff (qbad(\\ComputerName\ProcessName\FolderInProcess\Object), 00:30);
or you can use a monitor object:
MonitorProcess = new Monitor (\\ComputerName\ProcessName\FolderInProcess\Object);
Monitor1.Delay= 30;
The delays in the above examples filter out bogus signal fluctuations to insure the process file being checked is actually running or not. Since it would be of little value to place the function or monitor object inside the process file to be checked, you will have to use absolute or computer relative path to another process file. The difference betwee
n them is this. If the process file is on a different computer, the DNS computer name or IP address must be used following the double backslashes (\\ComputerName\ProcessName\FolderInProcess\Object). If the process file is on the same computer, this can be simplified by using a dot following the double backslashes (\\.\ProcessName\FolderInProcess\Object). Hope this helps!

[solved] To display Processes which are not running from constant process

i have constant processes prostat1,prostat2,prostat3,prosta4,prostat6,prostat8,prostat9 (6 processes) runs to support the application
Now my problem is
i want to display the process which is not running (from the above 6 processes)
Thanks in advance

Try this
echo "Constant processes not running"
echo
for PROC in prostat1 prostat2 prostat3 prostat4 prostat6 prostat8 prostat9
do
        if [ ! "`ps -ef | grep $PROC | grep -v grep`" ]; then
                echo $PROC
        fi
doneBTW, those are 7....:-)

Scheduled process flows are not running automaticaly-OWB database clonning

What I did:
1.     Cloned the entire OWB repository database from live (bidb01.bh.xyz.com) server to new (green1.bh.xyz.com) server.
******     Source     New
Physical Hostname     bidb01.bh.xyz.com     green1.bh.xyz.com
DB Logical Hostname     xyzbidb      bidb-lh
Service Name     BIPROD     BIPROD
Listener Port     1521     1521
Oracle Home of RDBMS     /app/oracle/home/product/10.2.0     /orabidb/oracle/product/10.2.0
Oracle Home of OWB     /app/oracle/home/product/10.2.0/owb /orabidb/oracle/product/10.2.0/owb
2.     Followed the Metalink Note 434272.1 (How To Update Warehouse Builder After A Database Cloning)
Issue:
Before doing the step-2, every time we put the new database up the normal process flows which run every day (10 AM, 1 AM , 2 AM , 2 PM, etc.) got executed on the production environment and hung the original processes that are being run on the production environment.
After following the note 434272, scheduled process flows in production is working fine but in the new server it is not at all working.
Could anyone please help me to fix this?
Edited by: Padmanaban G on May 7, 2010 5:15 PM

The issue was resolved by renaming the workflow. What is learned here is, we should not have same workflow name for two different workspace.

Process Ch to be run on 1st monday every month

Similar Messages

Maybe you are looking for