Process Chain behavior changed after SP upgrade

Hi all, we've recently updated SP from SAP_BW 700, SAPKW70016 to SAPKW70021.
We realized about a particular process chain behavior:
We have many process chains configured to execute the next step "Always" (whatever it happens with the previous process).
This is the situation which changed:
BEFORE the upgrade:
If error raises on a process, this one remains "red" but the subsequent processes continues.
Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
AFTER the upgrade:
If error raises on a process, this one remains "red" but the subsequent processes continues.
Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
The remaining processes are executed once again (a new branch is generated). <- This is different
I want the "BEFORE the upgrade" behavior to keep working as always.
Do you know if there's some OSS note or tips of configs available to set this as my needs? (we have found the OSS Note 1398868 and implemented it, but the "effect" is not as we should expect for this case in particular).
I hope you can help. Thanks in advance and best regards,
Bernardo

I've found the OSS note: Note 1473491 - Chain not continued with termination and "ALWAYS" link; delivered with "SAPKW70025" corrections. It seems to be solving the issue I've originally mentioned. I'll perform some tests on this and update.
Regards,
Bernardo

Similar Messages

Process Chain running even after end date

Hi,
We are scheduling month end PC to run every 2 hours and also we have given end date for today evening.but process chain runs even after end date for every 2 hours.so we have to manually remove it from scheduling.
Any method how can PC stop on its own after end date .
Any help highly APPRECIATED
Thanks
Nilesh Pathak

There might be multiple release jobs for thie process chain.
So check the same. Right click on process chain --> Display scheduled jobs --> Here all the jobs logs of the chain will be available.. So check the same here...
As you have descheduled it now.. probably you may not be having it as the first release job might be moved to Schedule status as soon as the END date has reached and then second one might have gone when you have removed the chain from Schduling..
Anyway check the same.. and also check in SM37 whether any other user has triggered it manually today or not?

Issue in process chain with DTP after imported to production

Hi,
we have a issue with process chain.
after transportation DTP technical name is differ in prod and dev. process chain is went inactive.
i have read some related threads, i'm not find any suitable solution for this.
we don't have access to change process chain(they are not willing to open prod system)
could you please provide solution on this issue .
Thanks,
EDK....
Edited by: EdK666 on Oct 21, 2011 2:54 PM

Hi,
I have observed the behavior of changing technical name for DTP but still I think your process chain should not become inactive due to this. I think process chain somehow adjust the new technical name but anyways you should be able to change the DTP in process chain directly in production system.
If that is not possible you can just try re-transporting it.
Regards,
Durgesh.

Problem in activating Process chain in Quality after transport

Hi All,
We have moved a set of process chain to Quality system.
When tried to activate the Process chain it is showing error in DTP.
The DTP name is same as in the Dev system.
So, we tried moving the DTP alone in another transport request.
Still the error exists. We also tried moving the process chain again.
We had tried importing only the structure and also the entire flow again.
Nothing worked.
Please suggest some solution.
Thanks in Advance,
Geetha

Thanks for yor reply.
Suman,
I have checked the Object Changeablity now in Dev system, I found it like Not changable for DTPA.
The DTP from DSO to Cube is fine, but we have problem with the DTP from DataSource to DSO.
Also, in the dev system when i clicked on Object Changeablity I get a popup like "System can be changed; settings not necessary".
Please suggest me like what must be done.
Prashantk & Arvind,
We imported the Process Chain along with the DTP first and we faced the problem.
So we imported the DTP alone again, but still we had the problem.
Again we imported the Process Chain after importing the DTPs.
So what i feel is DTPs must be there in the Quality, but why we have the problem persisting.
That too only for DTP from Data Source to DSO but not for the DTP from DSO to Cube.
Regards,
Geetha
Edited by: Geetha Devi Ramalingam on Jul 12, 2011 9:43 AM

Process chain Schedule change

Hi,
I have process chains in which there is one info packages. I have changed the Schedule from once in a day to twice in a Day. But after that Process chain is not executing the infopackage. then I have changed the schedule in the infopackage and clicked start. After that I have changed the Infopackage to Start immediate and save the infopackage and came to process chain and again activated and scheduled but when I go to the info package it is still in the schedule mode. Previously this process chain is working fine but now it is not executing.   This contains two programs also. Please suggest me in this.
Thanks
naveen

Hi Naveen,
   Goto process chain and double click on start routine and specify the start timing make it periodic for evry 12 hours.
   Execute process chain, you can see as scheduled only. According to specified schedule times chain will be triggered.
Hope it Helps
Srini

Process Chain triggers Automatically after the Transport

Hello There,
I have a Process chain setup to load Transaction Data and the infopackets are set to "Immediate Start"..
When I transport these to Test environment, they are getting executed immediately after the transport..
Just wondering ,, this is what it intended to do.. because I don't want to run them after the transport.. is it something I am missing anything here ??
Your comments are much appreciated..
Thanks
Mavi

Mavi,
Once you click delete and save. The schedule is deleted. You could view via Maintain Start Variant -> Direct Scheduling button.
You will noticed that there is nothing schedule i.e. all tabs (immediate, specific datetime, etc) are not scheduled.
Answering to your question on modifiable in Test and Production box :
All you have to do is go to RSA1 -> Transport Connection -> Object Changeability -> Change the Process Chain objects to Changeable -> Save.
And you are done i.e. you could change the scheduling of the RSPC in Test and Production.
Remember to assign the point to the solution provided...:-)
Thanks.
Regards,
Lye

Process chain not continue after successful node

Hi gurus,
   In my process chain I load data from R/3 to PSA and then execute DTP to DSO, all actions are serially. Usually our PC is running well. But recently the PC will stop after the loading to PSA was successfully end , which means in the log view of PC this node was green.
   I have checked the table RSPCPROCESSLOG, the entry here was also marked as successful. ( STATE = G )
   I have no idea why this PC wouldn't continue automatically?
Regards,
Aaron

Hi Ashok,
We have tried manually execute DTP to load data from PSA into DSO. Everything is OK. And as I mentioned, this PC was OK before! Sometimes when execute the failed PC several times, it runs correctly.
   This is why it looks so weird! I guess is it related to time exceed (load to PSA cost 2 hours) or some potential restrictions?
Regards,
Aaron

Process Chain gets unschedule after execution

I've created 1 event based process chain
i'm triggering this event from an abap program.
but after executing the process chain, the process chain gets unschedule automatically. I've used BP_RAISE_EVENT FM to trigger the event.
Thanks in advance.

Hi AG,
Can you please check the value of profile parameter:
rdisp/rfc_min_wait_dia_wp in you remote BW system. Is it 1?
If that is the case please increase the value to a more suitable value. This will determine the number of waiting dialog work processes in your system.
It is dynamically switichable. Please try this out and check the results.
Please award points if issue got solved.
Regards.
Ruchit.

Process chains node change

Hi All,
Please let me know how to change a process chain from "not assigned node" to desired node.
Your help is appreciated.
regards
raveena

Hi Raveena,
Please see how to do this from the following thread:
Re: Change the Directory of a Process chain.
Hope this helps...

Excel layout changed after EHP5 upgrade from EHP4.

Hi All,
We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
This is affected us as we have lot of macros enable for the excel files.
Request you all to help. Is there any sapnote, anyway we can resolved this issue.
Thanks

Hi Markus,
Thanks for reply.
I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
New Format Example
Production plan
Description                        Material                               Sales doc.
IRB 2600 M2004                 3HAC020536-018              104861
IRB 2600 M2004                 3HAC020536-018              2BT0615486
OLD Format
Production plan
                                      Description                    Material                               Sales doc.
                                      IRB 2600 M2004            3HAC020536-018               104861
                                      IRB 2600 M2004            3HAC020536-018               2BT0615486
Hope this above will help to make it clear.
After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
Thanks
Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

How do I Change the Name of My MacBook and Why was it Changed after the Upgrade to Yosemite?

Hi everyone,
I upgraded my MacBook Air (2012) to Yosemite a few months back and it changed the name of my Mac from "Alan's MacBook" to "Alan MacBook Air (2)." I simply want to know how to change it back to the original name. Also, why was it changed in the first place after my upgrade to Yosemite?
Thank you so much!!!
Alan

Professor AR wrote:
Also, why was it changed in the first place after my upgrade to Yosemite?
This was a common bug in Yosemite. Follow dwb's instructions but also restart your router. Make sure you're running OS X 10.10.2 since it was supposed to have been addressed with that update.
I have heard allegations regarding simultaneous use of both Wi-Fi and Ethernet (or equivalent adapter, considering it's a MBA) but can find no justification for them, and I never personally observed any correlation to it. It's perfectly acceptable to use both.

Process chains Server changes

Hi,
Guys this is basis question but If you have ideas to change server information for Process chains.We are having problems running process chains.Its showing old server info we have done refresh few days back.Need to change server info for all the chains in Mass not one by one its hectic process...
Please advise if anyone came across similar kinda problems..
Regards,
Andy

Hi Srikar,
RSTPRFC creates a destination into the BW-standard-client with the BW-Background user (usually called BWREMOTE or ALEREMOTE).
This destination then is used to activate the chain in the BW-standard client remotely from the client 000.
Please refer to SAP Note 659160 for further details.
Hope this helps,
Colum

Changes after firmware upgrade in nokia 3250

hi i have nokia 3250 and want to are there any changes after upgrading firmware beacuse before i owned nokia 6270 and after upgrading firmware the music volume on my headset became very low and i dont want same wit my 3250

yeah, the N80 has a history of being buggy. Even with the latest firmware. Its a shame, because it was a damn good phone. Anyhow
You can download Yahoo!Go from:
http://uk.mobile.yahoo.com/go
Not sure about the others. (My operator, Three, offers Yahoo Messenger and Yahoo Go to its customers, but they "are incompatible with the N80" if you can believe that.)
Anyhow..
Currently using E71, looking at options

Process Chain Attribute Change Run

Hi Experts,
I am working BI 7.0 version, I am try to run Process chain showing warning Error in Infopackage level, Please find the below Error Message:
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4DLO5GB778XTBBM57040KMRW4 in the chain
Please provide me solutions, how to solve this issue, Please ASAP.
Thanks & Regards,
Bharathi.

Hi All,
Thanks a lot for ur assistance.
Thanks & Regards,
Bharathi.

Shadow Behavior Changed after Pro Update

I have a finished 3D animation that was done just before the update.
It consists of a person standing on top of (perpendicular to) a flat plane. A stationary spotlight is casting a shadow of the person onto the plane as the camera is animated rotating 90 degrees around the front of the comp. I have about 12 of these comps with different people for the duration of the animation
Prior to the update the shadow's behavior was unchanging throughout the animation for every comp. Now, after the update the shadow seems to blur/fade in for the 1st 45 degrees of the animation for some. For others it stays blurry/faded for the whole animation.
What gives?! Is anybody else having issues with casted shadows in 3D comps?

Thanks everyone for your input.
I have finally been able to fix the problem, but I have no explanation of why it happened to begin with. After trying all of your suggestions for replacing cameras and lights I wound up checking my original comps lights settings.
I had set the shadow softness to '20". For some reason Motion was interpreting this differently between updates. Going back to the original comp and setting the shadow softness to "0" brought everything back in line to it original behavior (i.e. no behavior change on animation).
While I'm glad to have solved the problem I believe that this is a bug in the software that needs to be addressed.
Thanks again guys!

Process Chain behavior changed after SP upgrade

Similar Messages

Maybe you are looking for