Process Chain error while loading CVC's into planning book

Hi I am trying to run the process chain and till half chain it was good and at one place after VMI Generate CVC's there is a box showing in RED and it is Load Infocube and when i checked it in batch processing it says end with errors and I could'nt find exactly what to do to run the entire process chain. Please anybody can tell me how can i resolve this issue.
Thanks
Hari

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data  --> Giving COM Error
The reason of Abrupt  Values in Live Cache  Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

Similar Messages

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • Process chains: error when including CVC generation process type

    hello all !
    I have a Pc that loads data from custom extractor into a Icube.
    next triggers Generate Characteristic combination which never executes. Status remains active but no "completed succesfully" (yellow triangle) in monitor of pc.
    When I run it alone the CVC generation process types executes OK...??!!!
    My sequence is Delete Index from cube ---> Load IP --> Atribute change run ---> Create Index --> Delete overlapping request (up to hear loads oK although status never becomes green '??)
    final step is a CVC generation + adjust time series process type.
    Does any of you know why the error ? and how to help solving it out ?
    appreciate all yur comments

    Hi Samir,
    I guess you can directly go to RSA1->Source Systems.Rt click and Transfer Global Settings then Delete the Red Request and Go to the Particular Process chain and do a Repeat/Repair.
    You can try repairing it...
    Rest of your question is not clear.... Give me ur number, will call you, then we will discuss
    Rgrds,
    Habeeb

  • Error While loading the data into PSA

    Hi Experts,
           I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
    "Check Load from InfoSource    
    Created       YOKYY  on   20.02.2008   12:44:33 
    Check Load from InfoSource , Packet IP_DS_C11
    Please execute the mail for additional information.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Pls help me in this......
    With Regards,
    Yokesh.

    Hi,
    After editing the file did you save the file and close it.
    This error may come if your file was open at the time of request.
    Also did you check the file path settings.
    If everything is correct try saving the infopackage once and loading again.
    Thanks,
    JituK

  • Error While Loading XMl Doc into Oracle Database 10g

    Hi all,
    I have a task that , I have to make a utillity by which we can load XML Doc into a Table. While searching on Internet i found following Procedure on ASK Tom
    CREATE OR REPLACE
    procedure insert_xml_emps(
    p_directory in varchar2, p_filename in varchar2, vtableName in varchar2 )
    as
    v_filelocator bfile;
    v_cloblocator clob;
    l_ctx dbms_xmlsave.ctxType;
    l_rows number;
    begin
    dbms_lob.createtemporary(v_cloblocator,true);
    v_filelocator := bfilename(p_directory, p_filename);
    dbms_lob.open(v_filelocator, dbms_lob.file_readonly);
    DBMS_LOB.LOADFROMFILE(v_cloblocator, v_filelocator,
    dbms_lob.getlength(v_filelocator));
    l_ctx := dbms_xmlsave.newContext(vTableName);
    l_rows := dbms_xmlsave.insertxml(l_ctx,v_cloblocator);
    dbms_xmlsave.closeContext(l_ctx);
    dbms_output.put_line(l_rows || ' rows inserted...');
    dbms_lob.close(v_filelocator);
    DBMS_LOB.FREETEMPORARY(v_cloblocator);
    end ;
    when i try to run this procedure
    BEGIN
    insert_xml_emps('XML_LOAD','load.xml','IBSCOLYTD');
    END;
    it gaves me following Error
    ORA-29532: java call terminated by uncaught java exception : Oracle.xml.sql.OracleXMLSQLException:No
    rows to modify-- the row enclosing tag missing. Specify the correct row enclosing tag.
    ORA-06512: at "SYS.DBMS_XMLSAVE", line 115
    ORA-06512: at "EXT_TEST.INSERT_XML_EMPS", line 18
    ORA-06512: at line 2
    Can anyone describe me this error
    Thanks.
    Best Regards.

    SQL> /* Creating Your table */
    SQL> CREATE TABLE IBSCOLYTD
      2  (
      3  ACTNOI VARCHAR2 (8),
      4  MEMONOI NUMBER (7,0),
      5  MEMODTEI DATE,
      6  AMOUNTI NUMBER (8,0),
      7  BRCDSI NUMBER (4,0),
      8  TYPEI NUMBER (4,0),
      9  TRANSMONI NUMBER (6,0)
    10  );
    Table created.
    SQL> CREATE OR REPLACE PROCEDURE insert_xml_emps(p_directory in varchar2,
      2                                              p_filename  in varchar2,
      3                                              vtableName  in varchar2) as
      4    v_filelocator    BFILE;
      5    v_cloblocator    CLOB;
      6    l_ctx            DBMS_XMLSTORE.CTXTYPE;
      7    l_rows           NUMBER;
      8    v_amount_to_load NUMBER;
      9    dest_offset      NUMBER := 1;
    10    src_offset       NUMBER := 1;
    11    lang_context     NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
    12    warning          NUMBER;
    13  BEGIN
    14    dbms_lob.createtemporary(v_cloblocator, true);
    15    v_filelocator := bfilename(p_directory, p_filename);
    16    dbms_lob.open(v_filelocator, dbms_lob.file_readonly);
    17    v_amount_to_load := DBMS_LOB.getlength(v_filelocator);
    18    ---  ***This line is changed*** ---
    19    DBMS_LOB.LOADCLOBFROMFILE(v_cloblocator,
    20                              v_filelocator,
    21                              v_amount_to_load,
    22                              dest_offset,
    23                              src_offset,
    24                              0,
    25                              lang_context,
    26                              warning);
    27 
    28    l_ctx := DBMS_XMLSTORE.newContext(vTableName);
    29    DBMS_XMLSTORE.setRowTag(l_ctx, 'ROWSET');
    30    DBMS_XMLSTORE.setRowTag(l_ctx, 'IBSCOLYTD');
    31    -- clear the update settings
    32    DBMS_XMLStore.clearUpdateColumnList(l_ctx);
    33    -- set the columns to be updated as a list of values
    34    DBMS_XMLStore.setUpdateColumn(l_ctx, 'ACTNOI');
    35    DBMS_XMLStore.setUpdateColumn(l_ctx, 'MEMONOI');
    36    DBMS_XMLStore.setUpdatecolumn(l_ctx, 'MEMODTEI');
    37    DBMS_XMLStore.setUpdatecolumn(l_ctx, 'AMOUNTI');
    38    DBMS_XMLStore.setUpdatecolumn(l_ctx, 'BRCDSI');
    39    DBMS_XMLStore.setUpdatecolumn(l_ctx, 'TYPEI');
    40    DBMS_XMLStore.setUpdatecolumn(l_ctx, 'TRANSMONI');
    41    -- Now insert the doc.
    42    l_rows := DBMS_XMLSTORE.insertxml(l_ctx, v_cloblocator);
    43    DBMS_XMLSTORE.closeContext(l_ctx);
    44    dbms_output.put_line(l_rows || ' rows inserted...');
    45    dbms_lob.close(v_filelocator);
    46    DBMS_LOB.FREETEMPORARY(v_cloblocator);
    47  END;
    48  /
    Procedure created.
    SQL> BEGIN
      2  insert_xml_emps('TEST_DIR','load.xml','IBSCOLYTD');
      3  END;
      4  /
    PL/SQL procedure successfully completed.
    SQL> SELECT * FROM ibscolytd;
    ACTNOI      MEMONOI MEMODTEI     AMOUNTI     BRCDSI      TYPEI  TRANSMONI
    28004125     251942 05-SEP-92        400        513          1          0
    28004125     251943 04-OCT-92        400        513          1          0
    SQL>

  • Error while loading XML files into scott user

    Hi All,
    I'm new to xml files. I need to load xml files into database through OWB.
    I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
    Followed same steps as specified in userguide.
    But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
    Procedure is:(1)--with username.tablename
    begin
    wb_xml_load(
    '<OWBXMLRuntime>'||
    '<XMLSource>'||
    '<file>&&SAMPLES_DIR.sample1.xml</file>'||
    '</XMLSource>'||
    '<targets>'||
    '<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
    '</targets>'||
    '</OWBXMLRuntime>'
    end;
    ERROR at line 1:
    ORA-20006: Error occurred while truncating target database object SCOTT.PO.
    Base exception: ORA-01031: insufficient privileges
    ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
    ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
    ORA-06512: at "SCOTT.SAMPLE1", line 3
    ORA-06512: at line 1
    Procedure is:(2) with out username
    begin
    wb_xml_load(
    '<OWBXMLRuntime>'||
    '<XMLSource>'||
    '<file>&&SAMPLES_DIR.sample1.xml</file>'||
    '</XMLSource>'||
    '<targets>'||
    '<target dateFormat="yyyy.MM.dd">PO</target>'||
    '</targets>'||
    '</OWBXMLRuntime>'
    end;
    ERROR at line 1:
    ORA-20006: Error occurred while truncating target database object PO.
    Base exception: ORA-00942: table or view does not exist
    ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
    ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
    ORA-06512: at line 2
    xml file:
    <ROWSET>
    <ROW>
    <ID>100</ID>
    <ORDER_DATE>2000.12.20</ORDER_DATE>
    <SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
    <SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
    <SHIPTO_CITY>Redwood City</SHIPTO_CITY>
    <SHIPTO_STATE>CA</SHIPTO_STATE>
    <SHIPTO_ZIP>94065</SHIPTO_ZIP>
    </ROW>     
    </ROWSET>
    Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
    What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
    Thanks in advance for the help.
    Regards,
    Joshna

    Hi Joshna,
    Please follow below steps to load xml file to oracle database.
    1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
    2. Import WB_XML_LOAD procedure . and exit to repository owner.
    3. connect to owb design center through your repository user (ex : REP_USER)
    Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
    '<OWBXMLRuntime>'||
    '<XMLSource>'||
    '<file>E:\SOURCE\emp.xml</file>'||
    '</XMLSource>'||
    '<targets>'||
    '<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
    '</targets>'||
    '</OWBXMLRuntime>'
    4. Drag pre mapping operator and select WB_XML_LOAD procedure
    5. Connect Constant Operator attribute to pre mapping operator.
    6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
    7. Validate and deploy the mapping.
    8. grant necessary grant command to rep_owner user to rep_user user.
    (Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
    To rep_user , select ,insert, delete privileges.
    9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
    10 . If you want more description please go through the below link
    http://download.oracle.com/docs/html/A95931_01/apf.htm
    Regards
    Venkat

  • SQL*LOADER ERROR WHILE LOADING ARABIAN DATA INTO UNICODE DATABSE

    Hi,
    I was trying to load arabic data using sql*loader and the datafile is in .CSV format.But i am facing a error Value to large for a column while loading and some data are not loaded due to this error.My target database character set is..
    Characterset : AL32UTF8
    National Character set: AL16UTF16
    DB version:-10g release 2
    OS:-Cent OS 5.0/redhat linux 5.0
    I have specified the characterset AR8MSWIN1256/AR8ISO8859P6/AL32UTF8/UTF8 separately in the sql*loader control file,but getting the same error for all the cases.
    I have also created the table with CHAR semantics and have specified the "LENGTH SEMANTICS CHAR" in the sql*loader control file but again same error is coming.
    I have also changed the NLS_LANG setting.
    I am getting stunned that the data that i am goin to load using sql*loader, it is resided in the same database itself.But when i am generating a csv for those datas and trying to load using sql*loader to the same database and same table structure,i am getting this error value too large for a column.
    whats the probs basically???? whether the datafile is problemetic as i am generating the csv programmetically or is there any problem in my approach of loading unicode data.
    Please help...

    Here's what we know from what you've posted:
    1. You may be running on an unsupported operating system ... likely not the issue but who knows.
    2. You are using some patch level of 10gR2 of the Oracle database but we don't know which one.
    3. You've had some kind of error but we have no idea which error or the error message displayed with it.
    4. You are loading data into a table but we do not have any DDL so we do not know the data types.
    Perhaps you could provide a bit more information.
    Perhaps a lot more. <g>

  • Process Chain error while creating index on cube

    Hi All,
    I have two process chain P1 daily(except sunday) and P2 weekly(sunday), both have same process, i.e. cube C1 is loaded with same infopackage in both infopackage.
    Now, on saturday after laoding the content index creating process on cube c1 is failed by process chain P1, but on sunday P2 have laoded C1 correctly and created indexes.
    Now, my doubt is wheather i repeat process chain P1 from creating indexes or there is no need as indexes on cube are created by PC 2.
    kindly suggest,
    Regards,
    Rajvinder

    Hi Raj,
    There is no need of running the process chain P1, the data has been bought by the process chain P2.
    If there are any filters/data selection in infopackage level then you need to run the process chain P1.
    Be make sure about the process chains and there infopackages/dtp's.
    With Regards,
    Ravi Kanth

  • Process Chain Error while activating DSO

    Hello.
    1st, let me say that I'm pretty new to BI so I apologize for the stupid question :-S
    I have a process chain (Warehouse Mangement) that failed this morning at the DSO data activation step.  It's simply because some entries have lowercase value in a field that should not.  I know how easy this is to fix in the transformation but my problem is more on how to fix the actual fail of the process chain.  Can I edit the "non-activated" data in the DSO (only 2-3 records that I need to put in uppercase) and "repair" my process chain or should I proceed another way?
    Thanks for your help.

    Hi John.
      If guess your Process Chain process ended in "Red color". Once you fix the error you can try to make "right-click" on the process with error and select "Repair". If this operation is "supported" by the activation process you won't have error.
      But I really believe that you'll have to erase the request and launch the complete process (o set of related processes) once again. It's possible that the data you want its already in the NEW-DATA table of your ODS.
      This tables is the following.  /BIC/A<your ods tech-name>40
    Hope it helps
    gdmon.-

  • Error while loading period dimension in planning through DIM

    Hi,
    I am trying to load the metadata extracted from DRM into Period dimension in Hyperion Planning through Informatica using DIM. But I am getting the following error:
    Record [[YearTotal, Period, Total Year, Dynamic Calc, 0, null, null, null, null, Unspecified, null, null, null, null, ~, ~, ~]] was rejected by the Planning Server.
    Error occurred during load process. Error message is: Cannot load dimension member, error message is: java.lang.RuntimeException: Year operations not handled through this entry point.
    Record [[1stHalf, YearTotal, null, Dynamic Calc, 0, null, null, null, null, Unspecified, null, null, null, null, +, +, +]] was rejected by the Planning Server.
    Error occurred during load process. Error message is: Cannot load dimension member, error message is: java.lang.RuntimeException: Invalid First Child Id
    Appreciate your help.
    Thanks.

    The .otn file is created when essbase is restructuring and once completed renamed to otl, if it does not complete it can leave the .otn file.
    You should be able to delete the otn (maybe stop the application first) and open the outline.
    I would also check the logs generated from ODI and also the essbase app logs to troubleshoot the issue.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while pulling sales history into planning area

    Hi Folks,
    We got error while pulling the sales history data into planning area from infocube.
    We uploaded CVC into MPOS.
    Please find the below error.
    ""Combinationens of infocube are not contained in BasisPlobStru""
    Message no:/SAPAPO/MSDP_REL106
    Thanks
    Sri

    Hi,
    The issue is that The Characteristic Combination is present in MPOS as well as in the list cube.While Uploading sales from the list cube result is that for some months Sales is matching exactly where as for some months data is not showing in the planning area though sales is present in list cube for the same month.I have run Consistency checks for Time series also.
    Thanks
    sri

  • Error while loading flat file into DSO

    Hi
    I am loading data from a flat file into a DSO. My fields in the flat file are Trans_Dt, (CHAR) Particulars (CHAR), Card_Name, (CHAR) Exps_Type, (CHAR)
    Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt, (CURR)
    0Currency (CHAR)
    In the proposal tab apart from the above mentioned fields 3 additional fields viz, field 10, field 11, and field 12 have come. How did these 3 additional fields come when I don't have any additional fields in my flat file? I've deleted these extra 3 fields though.
    When I activate the DataSource it is getting activated but then I get the message 'Data structures were changed. Start transactions before hand'. What does this message mean?
    When I hit the 'Read preview data' button it doesn't show me any data and gives me the error Missing reference to currency field / unit field for the fields Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt
    How do I create a reference field to the above mentioned fields?
    Earlier I didn't have the 0Currency field in the flat file. But in my DSO while creating the key figures by default the 0Currency field also got created which is quite obvious. Now while activating the transformations I was getting a message that 'No source field for the field 0Currency'. Hence I had to create a new field in my flat file called 0Currency and load it with USD in all rows.
    Please help me in loading this flat file into the DSO.
    Thank you.
    TR.

    Hi guys,
    Thanks a lot for your answers. with your help I could see the data in the 'Read preview data' and schedule the load. I did use all the Info objects in the info objects column of the data source to load the flat file.
    The data is in PSA successfully without any issues. but when I executed the DTP it failed with errors.
    Earlier there was no mapping from Currency field in source to the all the key figure fields in the target in the transformation. The mapping was only from Currency to 0CURRENCY but still the transformation got activated. As per your advise I mapped Currency field to the remaining Key Figure fields but then I am getting the error
    'Source parameter CURRENCY is not being used'
    Why is that so?
    list of Errors after executing the DTP:
    1. 'Record filtered because records with the same key contain errors'
    Message:
    Diagnosis: The data record was filtered out becoz data records with the same key have already been filtered out in the current step for other reasons and the current update is non-commutative (for example, MOVE). This means that data records cannot be exchanged on the basis of the semantic key.
    System Response: The data record is filtered out; further processing is performed in accordance with the settings chosen for error handling.
    Procedure: Check these data records and data records with the same key for errors and then update them.
    Procedure for System administration
    Can you please explain this error and how should I fix this error.
    2. Exception input_not_numeric; see long text - ID RSTRAN
    Diagnosis: An exception input_not_numeric was raised while executing function module RST_TOBJ_TO_DERIVED_TOBJ.
    System Response
    Processing the corresponding record has been terminated.
    Procedure
    To analyse the cause, set a break point in the program of the transformation at the call point of function module RST_TOBJ_TO_DERIVED_TOBJ. Simulate the data transfer process to investigate the cause.
    Procedure for System Administration
    What does this error mean? How do I set a breakpoint in the program to fix this error inorder to load the data?
    What does Procedure for System Administration mean?
    Please advise.
    Thank you.
    TR.

  • Getting error while loading flat file into table.

    I am using ODI 11 and i am trying to load data in oracle database table using source as flat .txt file .
    When i execute the interface , i am getting below errors.
    ODI-1217: Session INF_FILE2TAB (31022) fails with return code 7000.
    ODI-1226: Step INF_FILE2TAB fails after 1 attempt(s).
    ODI-1240: Flow INF_FILE2TAB fails while performing a Loading operation. This flow loads target table PARTNER.
    Caused By: org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
    File "<string>", line 44, in <module>
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
         at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
         at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
         at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
         at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
         at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
         at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
         at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2224)
         at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2168)
         at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:333)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    java.sql.SQLException: java.sql.SQLException: ORA-06564: object DAT_DIR does not exist
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Please let me know pointers on this.

    Yes,after your sugestion i have created ODI agent and tested the file system connection in topology. It was connected successfully.
    but when i tried again for file to table load. Again got below error.
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
    File "<string>", line 44, in <module>
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
         at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
         at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
         at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
         at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
         at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
         at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
         at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2224)
         at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2168)
         at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:333)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    java.sql.SQLException: java.sql.SQLException: ORA-06564: object DAT_DIR does not exist
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Please suggest.

  • Error while loading the data into the cube using DTP.

    No SID found for the value'UL' of characterstics 0BASE_UOM.
    Please give me the idea ,to solve the error.
    Thanks&Regards
    Syam Prasad Dasari

    https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=6733764
    https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=5062570

  • Error while loading the planning book

    Hi There,
    I am getitng the below error while loading the data in planning book
    "Error for COM routine using application program (return code 40,016)
    Error reading data - Planning book cannot be processed further"
    Ran  /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
    Could you please advise?
    Thanks,
    Krishna

    Hi Krishna,
    Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
    Regards
    JB

Maybe you are looking for