Process for Adding Additional WAE to 4.0.11 Cluster with CIFS

I will be adding an additional WAE 612 W/ 4GB of memory to an existing single WAE 612/4GB cluster in the future. What is the best practice process for adding the second WAE to the cluster. I would like to do the WCCP configuration last. Whats the easiest way to move the policies from the existing WAE to the second wae. Is it as simple as just creating a Cluster Device Group and then adding both devices to the group. Will the second WAE inherit the settings for WAFS as well? I am not concerned about the WAAS setup.
I don't have access to the credentials for the CIFS connection on the core WAE today so i would really like to know if i can complete this install by just copying settings from the existing WAE using the device group settings.
I am also going to reverse the 61 and 62 settings to ensure that the inbound client connections get load balanced across the WAE properly.
Any other things to consider?
Thanks in advance
Mike

Mike,
The edges will always reconnect to the same core unless it's not available. In 4.0.x, WCCP does not effect CIFS connections (4050 connections), only load balancing the TCP connections outside the 4050 connections. I have manually load balanced edges before via expert mode on the edge GUI, but it's fairly unwieldy. How many edges do you have? I can dig up the procedure if you want to use it.
You can get decent load balancing by setting up both cores so they are both taking edge connections, take the old core offline (stopping the service in the GUI) for several minutes and then bringing it back up. A good number of your edges should now be on the new core and some will still be on the old core.
Also, remember it's best practice to try and keep N+1 at your core. If you loose a core WAE in your cluster and a single Core can't handle the CIFS traffic, you will continue to get CIFS optimization.
Hope that helps,
Dan

Similar Messages

Process for adding a boolean option to the web service API

Hey guys,
Here's a little background:
I'm currently working on adding an optional "strict" mode to some of the unmarshalling functions in SchemaMarshaller that will throw exceptions when receiving bad data for certain fields, and also improving the date handling while I'm at it (I want null instead of mangled dates when receiving bad data when strict mode is off).
This is for my benefit at the moment as I'm tired of spending time debugging Flex code when XFire and Oracle are spitting out rubbish (like empty xsd:DateTime nodes, DateTimes in xsd:Date nodes, etc) - but I'm sure other people would like to use it too while we don't have a response validator, so I'd like to do it in a way that I can submit as a feature request (with patch) on Jira.
My questions are about the procedure for stuff like this- where should this option be made public in the API, and who would I talk to about it? Or would it be best for it to always be strict? - That's how I'd like it :) Perhaps it should just log errors when it encounters bad data?
This is the first thing I'd like to "add" to the SDK rather than a simple bug-fix, so I just want to do things in a kosher manner. Sorry if I come across like a total noob :)
Cheers,
-Josh
"Therefore, send not to know For whom the bell tolls. It tolls for thee."
:: Josh 'G-Funk' McDonald
:: 0437 221 380 ::
[email protected]

Hey Josh, I'm swamped at the moment but appreciate your interest and your contributions to Flex and WebServices thus far. I'll try and get some time to look into your specific request and what you're hoping to do at the code level, but to answer your question about test cases, you should consider the NIST testsuite for XML Schema datatypes. BlazeDS has historically maintained the WebService implementation, so it appears their test case for NIST based schema tests starts out here (and refers to many data type test cases in the /nist subdirectory). http://opensource.adobe.com/svn/opensource/blazeds/branches/3.0.x/qa/app s/qa-regress/testsuites/flexunit/src/tests/flexunit/xml/NISTXMLSchemaTes t.as Pete ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Josh McDonald Sent: Tuesday, July 08, 2008 8:21 PM To: [email protected] Subject: Re: Process for adding a boolean option to the web service API A new message was posted by Josh McDonald in Developers -- Process for adding a boolean option to the web service API Yeah I knew it'd have to be somewhere outside of SchemaMarshaller, as it's [ExcludeClass] anyway so end users don't see it, nor is it documented in the api docs. Just wasn't sure where it should be. I'll have a think about it some more when I get some down time to work on it, but webservice was where I was thinking it should be too. Didn't think about having it settable on operation as well though, so thanks for that :) Anybody know a good source of valid values for various XSI types (date and DateTime mainly) for testing purposes? Or even who I should contact to get access to that sort of thing? I assume the W3C will take 6 months to answer me, and the answer will be "buy our $10,000 compliance testing suite" or something along those lines. -Josh On Wed, Jul 9, 2008 at 9:46 AM, Matt Chotin <[email protected]> wrote: A new message was posted by Matt Chotin in Developers -- Process for adding a boolean option to the web service API I think for a top-level user option I would put the new option on the mx.rpc.soap.Operation class (I think that's the name). You'd then have that propagate through to the underlying schema classes as they are used. I'd then also add an option to the WebService class itself, and basically in the Operation it should see if it has its own value set and if not check the value on the WebService. We do this for a couple of other flags too I think. End users in general wouldn't look at any classes other than the WebService and maybe the Operation classes, so asking them to set options on the schema classes themselves probably wouldn't work. Matt -- "Therefore, send not to know For whom the bell tolls. It tolls for thee." :: Josh 'G-Funk' McDonald :: 0437 221 380 :: [email protected] ________________________________ View/reply at Process for adding a boolean option to the web service API <a href=http://www.adobeforums.com/webx?13@@.59b5be89/1> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b5be89!folder=.3c060fa3> form to cancel your email subscription.

What is the process for adding customize coponent in palette of VE eclipse

Hi ,
I use our own enhaunced components for our applications inherited from standard swing components.
so I need to put our own components into the palette of the visual editor to simply add them to the design.
what is the process for this ?.
Thanks.

Hi,
you have to create a plugin for that.
See http://dev.eclipse.org/viewcvs/indextools.cgi/org.eclipse.ve.examples/org.eclipse.ve.example.customwidget/WebContent/index.html
- Michael

Userexit or BADI for adding additional tab in MIGO screen.

Hi all ,
Kindly tell me as to which exit or BADI is used to add additional tab in MIGO header.
Regards

Hi,
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number
Under PAI method declare the field to u2018Xu2019.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item (In this case production order number, material, u2026u2026.). For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZZGBAGS'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.

VT01N User exit for adding additional field to VTTP table and populate the

Hi,
Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number based on ship to address when we create a shipment..
need user exit in ...............to populate data to vttp table custom field when we append......

hi,
check these exits for vt01n.
Transaction Code - VT01N                    Create Shipment
Enhancement/ Business Add-in            Description
Enhancement
V56USVDP                                Preparation for updating new objects for transport?
V56USVDO                                Update new objects for transport
V56USTAT                                User-individual definition of transportation planning status
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
MV56AINI                                Initialization of transaction control for transportation
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
V56FSTAT                                Shipment processing: Activities when setting a status
V56L0001                                Status of Shipments for a Delivery
V56LDELI                                Read Delivery Data for Shipment Processing
Business Add-in
BADI_LE_SHIPMENT                        BadI: Shipment Processing
BADI_V56N                               User Exit for Message Determination: Shipment

What is the process for adding a new disk to make a Mirrored Array?

Hi,
I have a second120GB SATA drive I wish to add to my existing sytem in order to create a RAID-1 array.
What is the correct process to configure this, as the mobo/Promise documentation is not clear?
thanks
Danny

I have got a similar system except with 80Gb SATA HDD.
Try this link if you have not already got it
http://www.msi.com.tw/program/support/manual
You will find the utilities/manual link and one of the links there is the SATA Quick User's Guide. Look at page 7, I think that this is what you are looking for.
Good luck
(Sorry just looked at that link and it does not work, but if you follow the stages to that page you will find it. Let me know how you get on)

What is the best process for adding a long text scroll into a video?

I have an hour video and need to insert a narrated poem that will either scroll or have lines fade in / out. What is the best process to create that poem? Do I use Motion? Live Type? compose it directly in FCP? I'll have either a still image or a looping video for the background. Once I know the best starting point, then I'll refine my questions. The poem is about 4 minutes narrated. Appreciate any help to get me started.

In the effects window try "Scrolling Text". Set it to be the length you need it (duration) and paste in your text and render and see how you like it. I think scrolling text has a nice little fade at the top and bottom too.
Or, you can make the text an image in something like Photoshop and keyframe it to slowly move in FCP for the duration of the video.

Process for adding no cost item to Service Order and show on invoice SM

We want to put a non-cost item on a service order without having to put a $.01 value on them. We might purchase a box of bolts at a hardware store with a purchasing card and just expense items. We add the bolt as a line item on our Service Order to charge customer some amount. But we do not have a cost on the item. To put a bogus $.01 cost value on the item and have it show up in COPA and in the GL makes the data incorrect. It is our understanding that to pass an item on the service order through process related billing to the invoice it has to have a cost or it does not show up on invoice.   How do other folks deal with putting a no cost item on service order?

Hi,
I have tried everything, still its not working.
First I tried creating a Service Ticket and adding the line item at one go.Then I was getting status error:
System error: An attempt has been made to create a status object
with the object number DE20131333937DF180C5001372F65D25. However,
a status object with this number exists already.
Code sample given below:
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
    TABLES
      header          = itab_header
      item            = itab_item
      partner         = itab_partner
      status          = itab_status
      text            = itab_text
      return          = itab_return
      service_os      = itab_service
      input_fields    = itab_input_fields
      created_process = itab_created_process.
Then I tried creating a service ticket first and adding item later.Then there was no dump, but item details are not getting saved. Code sample given below:
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_product_i      = lt_product_i
    CHANGING
      ct_orderadm_i     = lt_orderadm_i
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
Can anybody please help me out on this? What is the correct approach?
Thanks and Regards,
Rohit

Need Tcode for adding additional partners for contract

Hi MMGuru's,
Is there any SAP transaction code( Otherthan ME32K) which allows us to update the partners functions by taking the contract number and purchasing organization.?.( like MEK1 which creates condition by taking contract number and line item ).
Inputs will be very helpful for my development.
Advance Thanks
Regards,
Praveen.

Hi All,
Regarding the query that i had raised ,
As such SAP has not provided any additional tcode to update the parnters for procurement documents.
I was able to achieve the functionality using the FM ' MM_UPDATE_PARTNERS'. this FM will allow you to add/modify/delete the additional partners for the below documents ;
A     Request for quotation
F     Purchase order
K     Contract
L     Scheduling agreement
Regards,
Praveen.

ICal in Mavericks - Still sending multiple invites for adding additional invitees

So is there an answer to this problem?
How do I add people to a meeting without sending out a mass update to all the prior invitees?
Similarly, on my iphone I have accidentally held down the invite and dragged it to a new time...it immediately auto-sends out a new invite...then when I moved it back, it sent out another invite. So the poor attendees get like 3 re-invites to the same meeting for a simple mistake on my side that they should never see.
WHERE IS THE OPTION ASKING "WOULD YOU LIKE TO RESEND THIS TO ALL CURRENT ATTENDEES?" (with a yes and no check box)

iCal
http://www.apple.com/support/ical

What is the process for adding an AOL mail account into Mac Mail?

Frustrating.
All I want to do is add another AOL mailbox account into my Mac mail.
No threads could I find, and nothing on Google either. But I did do it once before as I have my primary AOL mail account dumping into my Mac mail.
If I go into File> Import Mailboxes there is NOTHING that says AOL in to menu! I mean it should be the first or second choice considering how many people use AOL mail.
A little help for a URL that can tell me what to doe in Leopard to bring in another AOL mail account?
Thanks,

Are you trying to create the account in Mail or import mailboxes? Doing what you did won't create an account, it'll just try to import a mailbox. To create an AOL account in Mail, see:
http://about.aol.com/faq/openmailaccess#MacOSX
and:
http://members.aol.com/adamkb/aol/mailfaq/imap/applemail.html

Return process for the PO which has done the usage decision with QM

Hi Guru,
We are running below process right now, and stop there, don't know how to return to vendor:
PO for external vendor -> Goods purchased physically arrive -> Create a inbound delivery for this PO -> Post the GR with the inbound delivery created -> QA team performed the usage decision and rejected.
At this moment, how can we reverse the good receipt? We canu2019t use VL09 to reverse the inbound delivery, and we can not use MBST to reverse the material doucment which created during Post good receipt.
What's the correct process to return it to vendor?
Thanks,

Hi Rick,
Can use t.code MIGO and select return delivery for material document or delivery note.
Then select the respective document, it will display the details, now you can select the material which you want return and unselect the materials which you dont want to return and the quantities accordingly.
Save the document.
This will use movement type 122.
Regards
vk

Adding additional j2ee node

Hello,
we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
i would like to know what is the thumb rule for adding additional j2ee node?
when is it neccassary to add additional j2ee node?
Regards,
Moshe

Hi,
The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
SAP note: 716604 and upgrade JDK.
SAP note: 723909 -> set correct VM parameters
and if issue persists, then you will need to analyse the application causing teh leak...
SAP note: 1259465: Memory analyser.
Regards,
Hemanth

Adding additional dimensions in HFM

Hi Experts,
Need your advice.
Present scenario: we have an HFM application which is pulling data from Peoplesoft transactional system. for the current application we have created 4 custom dimension and based on it all the mappings were done.
Required:there is a requirement for adding additional custom dimension.
i just want to know if it is possible to add additional custom dimension in the present application without affecting the previous data within the application.
please advice the steps and the precautions to be taken.
will such addition affect the previous period data?
Thanks in advance.

What version of HFM are you running?
If you are at 11.1.2.2 (or higher I would imagine), then following link seems to provide some basic instructions on this process:
http://blog.topdownconsulting.com/2015/01/adding-custom-dimensions-hfm/
I would think about:
(1) Is an additional dimension necessary - could you possibly split up an existing custom dimension (in the past, when only 4 custom dims were allowed, many times a dimension would serve dual purposes),
(2) If you do decide to add a new dimension, this would be a major change that would effect all aspects of the application (data loading, reporting, historical data, consolidation rules, forms, grids, etc) - so, do you have a test system you could experiment with? At the very least you would want to make a copy of the current app and convert the copy as a test,
(3) probably you would want to do a thorough analysis of your consolidation rules before hand to see what the implications are of adding the new dim.

How to export a whole process for a single image.

Good morning.
I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
Thanks.

Hi Raghavendra,
Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
Kind Regards,
Urvashi

Process for Adding Additional WAE to 4.0.11 Cluster with CIFS

Similar Messages

Maybe you are looking for