Process not found

Hi,
We occasionaly have been seeing the following message in our logs:
=========================================================
10 Mar 2006 14:47:36,435 ERROR ProcessConfigurationMBeanImpl [ExecuteThread: '3' for queue: 'weblogic.kernel.Default'][]: Fai
led to configuration backend for ****.jpd
Throwable: com.bea.wli.bpm.runtime.ProcessNotFoundException: Process not found. Service URI: ****.jpd'
Stack Trace:
com.bea.wli.bpm.runtime.ProcessNotFoundException: Process not found. Service URI: '****.jpd'
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
=========================================================
Anybody have any clue why this should happen? We are on WLI 8.1.2 and Solaris 9. Any help is appreciated. Thanks!

No, actually is a first transport that we tried to do, is a new installation. The basis team create a track like follow:
DEV - CONS - TEST - PRD, where CONS and TEST are the same server with the same parameters. I dont know if this is a mistake.
thank u for your response,
Carlos Andres

Similar Messages

Master process not found, or multiple masters

Hi there,
The line:
Master process not found, or multiple masters
appears in /var/log/messages of a Centos server running FMS 3.5 right around the time Flash videos stop working on a site we built. Oddly, nothing appears in /opt/adobe/fms/logs/master.xx.log at the corresponding time*. Is there likely to be any more illuminating information somewhere on the server, to help us identify what caused Flash to stop working?!
Best wishes,
Toby
* Although the FMS logs feature this line a lot:
Assert failed in /util/TCSysUtil.cpp line 683

Thanks for getting back to me. From the error how did you deduce that this is memory related? The server does not currently service a great deal of traffic, although I'm certainly not saying that I know you're wrong. We're monitoring remotely using Nagios and there are no other indicators of stress (although memory is not monitored).
Thanks again, your help is much appreciated.
Toby

ProcessControl invocation failed - Process not found

I have built and deplyed a small integration application. When I try to test this
application I get the following run-time error:
[WLI-Core:530214]ProcessControl invocation failed[Service at /TestWeb/process/AddProcess.jpd
not found]
caused by: : com.bea.wlw.runtime.core.dispatcher.ServiceHandleException: Service
at /TestWeb/process/AddProcess.jpd not found
I am pretty sure that this process is deplyed on the server. I can see the following
modules deployed in the WebLogic console:
.workshop/TestWeb/EJB/AddProcess_54emdkdnnj
.workshop/TestWeb/EJB/AddProcessControl_54emdkdnnj
The JNDI tree also has entries for /TestWeb/process/AddProcess and /TestWeb/process/AddProcessControl.
Any idea what is going on?
Thanks.

Well, I cannot reproduce the problem anymore. I don't know what changed!
Steven Ostrowski <[email protected]> wrote:
And does the WLI Console show AddProcess under the Process Instance Monitor?
Naresh Bhatia wrote:
I have built and deplyed a small integration application. When I tryto test this
application I get the following run-time error:
[WLI-Core:530214]ProcessControl invocation failed[Service at /TestWeb/process/AddProcess.jpd
not found]
caused by: : com.bea.wlw.runtime.core.dispatcher.ServiceHandleException:Service
at /TestWeb/process/AddProcess.jpd not found
I am pretty sure that this process is deplyed on the server. I cansee the following
modules deployed in the WebLogic console:
.workshop/TestWeb/EJB/AddProcess_54emdkdnnj
.workshop/TestWeb/EJB/AddProcessControl_54emdkdnnj
The JNDI tree also has entries for /TestWeb/process/AddProcess and/TestWeb/process/AddProcessControl.
Any idea what is going on?
Thanks.

Process not found in Process Repository (Cons) after transport

Hello everyone,
I have a NWDI track with all SC's that I need. After test all in my DEV system (develop on track, deploy) I tried to transport my escenario :
1. Activities on track, all components and sources are there. Check In and Activate sucessfull.
2. Transport view: Release a waiting activity. Sucessful.
3. Verify entry in my CMS, is fine. Import request in Consolidation tab. Sucessfull.
4. In CBS Buildspaces, I can find my DC in DEV and CONS, without pending activities.
5. In development components I can see my DC in both sides too.
6. But I can't find the process in PROCESS REPOSITORY.
So, I miss something on the way?
Please, I will apreciate any help.
Regards,
Carlos Andres.

No, actually is a first transport that we tried to do, is a new installation. The basis team create a track like follow:
DEV - CONS - TEST - PRD, where CONS and TEST are the same server with the same parameters. I dont know if this is a mistake.
thank u for your response,
Carlos Andres

Error 405: file not found displayed when trying to run a process on server

Iam trying to run a "weblogic integration-process application" on server to test the application.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>
     Tutorial_Process_Application_Web</display-name>
     <listener>
          <listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
     </listener>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
     <display-name>
     Tutorial_Process_Application_Ear</display-name>
     <module id="WebModule_1180909671484">
          <web>
               <web-uri>Tutorial_Process_Application_Web.war</web-uri>
               <context-root>Tutorial_Process_Application_Web</context-root>
          </web>
     </module>
     <module>
          <ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
     </module>
     <module>
          <ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
     </module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
-----------------------------------------------

sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu

"Error 404: file not found"displayed when trying to run a process on server

Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
Edited by gvishu at 06/04/2007 9:39 AM

sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu

Error for open process order when BOM alternative is not found

Dear colleagues,
When I open process order. BOM alternative is selected according to the production version. But when BOM alternative is not found system gives only information message and I can open process order, I want to prevent open process order when there is no BOM alternative according to the production version. Because the Bom can be deleted after creation production version.
Thanks for your helping,

Hi,
U need to use an enhancement at the creation of order to check the active status of the bom and restricting the order creation when BOM status is inactive.
see whether following enhancement is useful for your scenario:
PPCO0006 Enhancement & EXIT_SAPLCOZF_003
Please confirm.
Regards
Suri

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Error when deploying BPM application: The specified process was not found

Hi,
I was trying to deploy a simple BPM application to a SOA Server, when I got the following error:
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
[04:55:19 PM] HTTP error code returned [500]
[04:55:19 PM] Error message from server:
There was an error deploying the composite on WLS_SOA2: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=myadress:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details.
[04:55:19 PM] Check server log for more details.
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
The log file in the server console shows this:
Error during deployment oracle.fabric.common.FabricException: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=192.168.168.231:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details at oracle.integration.platform.blocks.deploy.CompositeDeploymentCoordinatorMessages.throwOperationFailedOnNode(CompositeDeploymentCoordinatorMessages.java:132) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.submitRequestAndWaitForCompletion(CoherenceCompositeDeploymentCoordinatorImpl.java:351) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(CoherenceCompositeDeploymentCoordinatorImpl.java:214) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Restart the server as I found in some pages and even a thread here (https://forums.oracle.com/thread/1557156) is not the better solution, the real issue still unknown. I need to find a solution without restarting the server machine.
Thanks,
AAPDL

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

Class Not found Exception for invoking BPEL process through the Java code

Hi.
The JDeveloper IDE raise the Exception From the invoking the BPEL process through the java code .Class Not Found Exception (Locator,ID.......).What is process of importing these classes from API.

In your code (.bpel file) import the library using the bpelx:exec tag. For example the adding the following entry in your .bpel file imports the com.oracle.bpel.client.util library.
<bpelx:exec import="com.oracle.bpel.client.util.*"/>

Document in Process but not found in the workflow

Hi,
we have a document entered in purchasing and still in process but it is not found in the workflow, then it can't be approved by users.
help please, thanks.

You can try in test instance it first;
Run this script for your PO number, it will change the status from In Process to incomplete or Required reapproval,
then the PO need to be approved again, and you will be able to see it in the workflow
UPDATE apps.po_headers_all SET authorization_status = decode(approved_date, NULL, 'INCOMPLETE',
'REQUIRES REAPPROVAL'), wf_item_type = NULL, wf_item_key = NULL, approved_flag = decode(approved_date, NULL, 'N', 'R')
WHERE po_header_id= -Po header ID-
Hope it work

Java.lang.AssertionError: WSDL not found in the class file "processes

Hi,
I am using WLI 10.3 workshop to build process application. I have designed one JPD which inturn call another process JPD. So i have used worklist process control to create the process and tried to access the process. When i am executing the code, i am getting below error message.
13-Jun-2011 14:13:00 o'clock BST> <Error> <WLI> <BEA-000000> <Exception processing processes.ISPSSQMsgLisnt
Java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
Truncated. see log file for complete stacktrace
Java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
Truncated. see log file for complete stacktrace
xception processing processes.ISPSSQMsgLisnt
ava.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:628)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1029)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:950)
at com.bea.wli.broker.JWSSubscriber.getDispClass(JWSSubscriber.java:231)
at com.bea.wli.broker.JWSSubscriber.getRequest(JWSSubscriber.java:184)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:358)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:348)
at com.bea.wli.broker.SubscriptionDispatcher.doDispatch(SubscriptionDispatcher.java:87)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.run(MessageBroker.java:179)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.security.authentication.AuthenticationService.runAs(AuthenticationService.java:108)
at com.bea.wli.broker.MsgBrokerSecurityHelper.doDispatch(MsgBrokerSecurityHelper.java:231)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.doDispatch(MessageBroker.java:165)
at com.bea.wli.broker.MessageBroker.publishMessage(MessageBroker.java:984)
at com.bea.wli.mbconnector.jms.JmsConnMDB.publishMBMessage(JmsConnMDB.java:343)
at com.bea.wli.mbconnector.jms.JmsConnMDB.onMessage(JmsConnMDB.java:475)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
aused by: java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispFile.<init>(JwsDispFile.java:24)
at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:108)
... 34 more

Hi
Are you using wli process control?
That uses wsdl and could cause the issue.
I also saw couple of internal bugs CR264315 and CR288904 on the same issue on 9.2.
Since this is a wli issue could you post in the wli newsgroup to get more answers http://forums.bea.com/forum.jspa?forumID=2047 ?
Also you can open a BEA support case at http://support.bea.com and an wli support engineer would help you. Please refer to the Cr numbers above in your support case.
Thanks
Vimala

Adobe Acrobat Distiller Process. Issue with Font(L0420P not found, using courier)

Hi Everybody,
We are working for upgrade activities, which involves moving applications from Windows 2000 to Windows 2003 Servers.
My applications uses Adobe Acrobat distiller, which is also getting upgraded along with the server from Adobe 4.0 to 5.0 (Installed licensed Adobe distiller).
I have been using Adobe distiller to convert .PS files into .PDF files. The conversion process requires the PSFonts such as (MB006, L0B, L0420P etc..), each font got a separate PFB and PFM extension files, which are kept in the folder name called "Psfonts" and has been included in "Font location" under Distiller settings.
Using Distiller( Adobe Acrobat distiller 4.0 ) in Windows 2000 didn't create any issues or error while converting .PS files into .PDF files, all the PDF files are generated by Distiller as expected and process without any Font issues.
In Windows Server 2003, I installed Adobe Acrobat distiller 5.0 and moved the Font Folder "Psfonts" from older server(Windows 2000 server) to the new server(Windows 2003) and started Adobe Acrobat distiller process(5.0) to convert .PS to .PDF, most of the .PS files gets converted into .PDF files but when .PS files which require the Font L0420P comes in for Distilling, it displays an error message as "L0420P not found, using courier".
I checked with the old Server's (Windows 2000) font folder (Psfonts), it has the same files(PFB and PFM) as present in the new Server(Windows 2003).
I tried to check the Particular Font name(L0420P) in Distiller-->Setting-->Job options-->Font-->Embedding-->Psfonts, but L0420P font alone is missing in the List.
Could you please help in resolving this Font issue.

You may like to try deleting the PsFonts entry from distiller and closing it. Restart the machine, make the entry of PSFonts agina and try creating PDF.

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Process not found

Similar Messages

Maybe you are looking for