Process & optimize issue with timeid

Hi,
I work on script logics with BPC 7.0 xls2007 sql2005.
I need to process my application but I have this issue message :
   - Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactEPS, Column: TIMEID, Value: 10000022.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'EPS' partition of the 'EPS' measure group for the 'EPS' cube from the DEV database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Internal error: The operation terminated unsuccessfully
The timid value 10000022 correspond to 2010.TOTAL.
So I saw the dbo_tblFactEPS table with :
Select * from tblfactEPS where TIMEID not in (select timeid from mbrTIME)
But my selection is empty...
Moreover, I can't process my time dimension.
Can you help me ?
Regards,
Morgann

2010.Total is not a base member and normally you should not have something like that into your fact table.
Into fact table you must have just base members.
your selection is not completed. It has to be
Select * from tblfactEPS where TIMEID not in (select timeid from mbrTIME where calc = 'N')
If you will do that actually you will see records.
Kind Regards
Sorin Radulescu

Similar Messages

  • Adobe Acrobat Distiller Process. Issue with Font(L0420P not found, using courier)

    Hi Everybody,
    We are working for upgrade activities, which involves moving applications from Windows 2000 to Windows 2003 Servers.
    My applications uses Adobe Acrobat distiller, which is also getting upgraded along with the server from Adobe 4.0 to 5.0 (Installed licensed Adobe distiller).
    I have been using Adobe distiller to convert .PS files into .PDF files. The conversion process requires the PSFonts such as (MB006, L0B, L0420P etc..), each font got a separate PFB and PFM extension files, which are kept in the folder name called "Psfonts" and has been included in "Font location" under Distiller settings.
    Using Distiller( Adobe Acrobat distiller 4.0 ) in Windows 2000 didn't create any issues or error while converting .PS files into .PDF files, all the PDF files are generated by Distiller as expected and process without any Font issues.
    In Windows Server 2003, I installed Adobe Acrobat distiller 5.0 and moved the Font Folder "Psfonts" from older server(Windows 2000 server) to the new server(Windows 2003) and started Adobe Acrobat distiller process(5.0) to convert .PS to .PDF, most of the .PS files gets converted into .PDF files but when .PS files which require the Font L0420P comes in for Distilling, it displays an error message as "L0420P not found, using courier".
    I checked with the old Server's (Windows 2000) font folder (Psfonts), it has the same files(PFB and PFM) as present in the new Server(Windows 2003).
    I tried to check the Particular Font name(L0420P) in Distiller-->Setting-->Job options-->Font-->Embedding-->Psfonts, but L0420P font alone is missing in the List.
    Could you please help in resolving this Font issue.

    You may like to try deleting the PsFonts entry from distiller and closing it. Restart the machine, make the entry of PSFonts agina and try creating PDF.

  • ALBPM 5.7 BPM process admin issues with Oracle 11g RAC as directory service

    Hi,
    Setup ALBPM 5.7 enterprise for weblogic.
    BPM Engine deployed on weblogic cluster.
    BPM process admin (web console) deployed on tomcat.
    BPM process admin uses WEB-INF/directory.properties for directory configuration.
    things were fine with oracle SID,
    directory.default.url=oracle://<db_host>:1521/schema=diruser,sid=BPMDB { with this, login to process admin was working fine}
    But clueless, on how to configure RAC as the directory service in the above directory.properties file. Since this is a old version, no directory.xml in the installation.
    Connection string:
    (DESCRIPTION =
    (LOAD_BALANCE = on)
    (FAILOVER = on)
    (ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521))
    (CONNECT_DATA =
    (SERVICE_NAME = BPMDB)
    (FAILOVER_MODE =
    (TYPE = SELECT)
    (METHOD = BASIC)
    Please help how to use service name (above connection string) in directory.properties, to be able to login to process admin successfully.
    Thanks in advance,
    Swamy

    Using admin center, able to get the string to be used in directory.properties.
    FYI, the string looks like below,
    directory.default.url=oracle://customURL:0/schema=bpmdirectory,customURL=jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE = on)(FAILOVER = on)(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = BPMDB.DOMAIN.COM) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC))))

  • Calc optimization issue with commit blocks

    Hi there,
    How can we know the right commit block interval setting to the database?
    and though i am doing parallel calc its forcing to do the calc in serial mode due to some dependencies.
    Can anyone suggest me the best way to remove the dependencies!!!
    I am having lot of member formulas in my calc so its forcing the topdown cal mode though i am doing bottumup....
    How to avoid all these dependencies...or do u think topdown should be fine?

    It is better to use the default setting in the transactions tab.
    you can understand the behaviour of thses settings in the below link
    http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_eashelp/frameset.htm?dbdprptr.htm
    Mostly dense formula calculations will have calc dependencies and force the serial calculations.
    Tag all the dense formula members dynamic calc wherever possible.
    If any thing needs to be calculated in the batch, calculate by fixing Lev0 sparse combinations.
    In the Database rollup, Use Calcdim of sparse dimensions only.

  • Is anyone having issues with 27inch iMac late 2012 locking up when processing photos?

    Purchased new IMac 27 in July 2013 and 15  Macbook Air in November.  I upgraded all my software at the time of the Air purchase.  This is my 3rd  Mac book and second IMac.  Have all the same software on each.  The IMac keeps locking up especially when I am processing in Aperture.  It is worse when trying to move between Aperture and Elements or Big Aperture.  I have not had an issue with Air even when useing same file on same soruce.
    I took the IMac to shop for color bleed in moniter and then kept it a week, tested it, replaced the monitor, but said system is fine. 
    Any one else having an issue.  is it my PC or an issue with the software/Maverick.

    Got a late 2013 iMac 27". No problem at all. Try going to Disk Utility (in applications>utilities) and repair permissions. And then borrow a copy of Disk Warrior and clean optimize your hard drive.
    Within Aperture yourself, do you know how to restore/repair your library? Hold down the apple & option keys and simultaneously start Aperture. You will be prompted on screen. That usually fixes hangups. I do it monthly.

  • Issue with RFBIBL00 batch input processing

    Hello ABAP Experts,
    I am having issue with a speed of batch input session processing.  If you can please help me resolve the issue.
    I have a requirement to post liquidation document to clear open vendor down payment items and then to clear vendor invoice with liquidation.  I have created a custom program to address this requirement where it uses the SAP program and Call Transaction.
    For liquidation document posting, I am using the program RFBIBL00.  The custom program has steps:
    1.  Submit RFBIBL00 via job to create batch input session
    2.  Close job
    3.  Submit RSBDCSUB via job to process batch input session
    4.  Close job
    5.  Wait for 15 seconds
    6.  Read job log to get liquidation document number
    7.  If no document posted then display error
    The issue is when the job log is read it says u2018Session 10zrsbdcsubxxxxxxx is being processed by user   in mode   on serveru2019 and there is no error message or no document number with message number 312.  So the program displays error message, stops and cannot perform the second step. If I check in the system after a couple of minutes I find the document posted. I also increased the wait time.  But the first record processing always takes longer and the program finds as a failure.  The program can process next several records with success.
    I am looking for expert help if you please suggest how to resolve this.
    Thanks & Regards.
    Yashasvi

    Hi,
    Have you tried calling FM DEQUEUE_ALL before/after schedulling job?
    Gouri.

  • Issue with processing time of JDBC receiver adapter

    Hi all,
    We are using PI 7.1 EHP1.
    We have an issue with JDBC receiver adapter taking too much time to process messages.
    We are using XML SQL format message protocol with INSERT_UPDATE as the document format.
    Each message can contain multiple records, i.e. 1 single message can result in many updates/inserts.
    Currently, time taken to process in 6-12 secs which is quite high considering the messages are not very large in size.
    We sent the statements to Oracle DBA to see if anything about the queries being used is causing issues. Awaiting inputs.
    In the mean time, wanted to check if there is anything that can be done from PI side that will help us improving the processing time.
    Thanks in Advance,
    Sailaja.

    Hi,
           i think the main cause is  query taking long time to execute in DataBase.
          -> increase the read time and response time in the JDBC receiver adapter.
      In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
    For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
    Refer note 1078420 for more details
    please go through this blog i hope it will help you.
        http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
    regards,
      ganesh
    Edited by: ganesh.nijampudi on Oct 25, 2011 12:00 PM

  • Issue with Service Group Configuration for a BPM Process

    Hi,
    I am working on BPM processes on CE 711. I need to use the Service Group settings. I created a BPM process with a automated activity that maps to an enterprise service in HU2 (SAP ES Workplace system).
    After setting up the configuration in NWA for service registry and service group, I run the BPM process. The Enterprise Service runs into error and log records it as 'No matching BindingData is found for SOA smart configuration'. I have done most of the configuration as recommended but the matching end point
    url seems to be picked wrongly [http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_employeebasicdbyemployeeqr?sap-client=800] .
    I could not get any info on notes search and could not get much info about service group config. Any help here is greatly appreciated.
    Regards
    Suresh

    Hi Suresh,
    i just got an answer on my ticket. Here it is:
    There is a known issue with the upper case of the endpoint published in
    the Services Registry and in the WSDL.
    Before SP2 the matching for the binding for invocation is done
    by the endpoint url. There is a known issue that the endpoint published
    in the Services Registry is with lower case of the characters but in theWSDL the endpoint is with upper case. In your case the endpoint url in
    the Services Registry is as shown in the exception above:
    http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_srvcreqcrtrc?sap-client=800
    but in the WSDL the endpoint url is with upper case of the endpoint:
    ../ECC_SRVCREQCRTRC/..
    Because of this difference the call fails. This is fixed is 711 SP2.
    Workaround for this is if you create a Provider System based on your
    WSDL, not a Services Registry one.
    Hope that helps...
    Best regards
    Michael

  • Status issues with sales process

    Hi Friends,
    I have an issue with thrid party sales order processing
    Step#1
    My client runs the sales order for
    Material Qty
    p-100 10
    p-101 10
    p-102 10
    step-2
    Purchase requisition created and from vendor delivery happened
    Step-3
    My user created billing with reference of sales order for below material
    Material quantity
    p-100 20
    p-101 10
    p-102 20
    step-4
    user found mistake and he cancelled the invoice and created new billing document
    for
    material quantity
    p-100 10
    p-102 10
    again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
    material quantity
    p-100 10
    p-101 10
    p-102 10
    now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
    please suggest m

    Just checking to see if anyone has re-produced any of these issues...
    Thanks!
    Jason Walters

  • Image size issues with processing

    New to Adobe, I have had several issues with consumers images. I can not find how to save as jpeg and keep photo intergrity. Either the processer (local pharmacy, big name store.. etc) is cropping my images badly. I have been told this is my problem when I save in jpeg format. How do i protect my image? Resize with the pixels? Please help

    Hi,
    The most likely problem is that your camera is shooting in a different aspect ratio that you are trying to print in. This usually shows up by either cutting the tops/bottoms off or by cutting the sides off. Alternatively you may get a border top/bottom or sides.
    If that is the problem, you will need to crop the photo before getting it printed.
    So that we can help, can you please answer some questions.
    1) What operating system are you using?
    2) What version of PSE are you using?
    3) What are the pixel dimensions of the photo or what camera are you using?
    4) What size of photo are you trying to print (6" x 4"?) ?
    Brian

  • I am exporting a 2 min video, using a custom compressor setting. i have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

    I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

    Name: Vimeo HD Encode
    Description: No description
    File Extension: mov
    Estimated size: 2.3 GB/hour of source
    Audio Encoder
              AAC, Stereo (L R), 44.100 kHz
    Video Encoder
              Width: 1920
              Height: 1080
              Pixel aspect ratio: Square
              Crop: None
              Padding: None
              Frame rate: (100% of source)
              Frame Controls On:
                        Retiming: (Best) High quality Motion Compensated
                        Resize Filter: Statistical Prediction
                        Deinterlace Filter: Best (Motion Compensated)
                        Adaptive Details: On
                        Antialias: 0
                        Detail Level: 0
                        Field Output: Progressive
              Codec Type: H.264
              Multi-pass: On, frame reorder: On
              Pixel depth: 24
              Spatial quality: 75
              Min. Spatial quality: 25
              Key frame interval: 30
              Temporal quality: 50
              Min. temporal quality: 25
              Average data rate: 5.12 (Mbps)
    Compatible with Mac
    My video in the timeline is 1920 x 1080 / 23.98 fps
    I've installed Toast and photoshop elements recently, i also updated my apps the other day.
    I have had this problem before the updates of the apps though

  • Issues with FMSEdge process while security scan in progress

    We have recently deployed Flash Media Streaming server 3.5.2 and Flash Media Encoder on a Windows 2003 machine. We are able to capture live streaming and the regular streaming of recorded video’s without any issues.
    We are encountering an issue with one of the FMS’s process’s whenever a security scan is performed on the machine, during the security scan process one of the process’s for FMS called FMSEdge.exe creeps all the way up to 100% CPU utilization. This is causing problems with security scan not completing.
    Have any of you experienced this kind of problem? Could you please let us know if there is solution to this issue.

    Hi [email protected],
    Please refer the solution in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
    If you continue to face difficulties you can try initiating a direct download by following the steps listed at http://forums.adobe.com/thread/981369

  • Issue with heat maps refresh process in EID 3.1?

    Issue with Heat Maps in EID 3.1? Heats maps don't refresh unless you go back to home page and then again go back to the Endeca app.
    In Oracle Sample app if we open the Map tab we will see that Milwaukee is really hot in the heat map. now if we filter the data to just show data from 100 miles within Orlando, FL then the map will get refreshed to show that area but the colors on heat maps do not change.
    Now if we keep the refinements same and go back to home page and again go back to sample app and maps tabs then it will still show area of 100 miles within Orlando, FL which is good but now heat map would have updated and it would show us correct color.
    Now if we remove the refinement then it would show complete US map as hot which is again wrong.
    I have observed this issue in chrome browser as well as firefox.
    Is there anyway to overcome this issue?

    This issue was resolved after applying latest patch from Oracle.

  • Issue with process order confirmation

    Hi,
      I m doing the testing of SAP EHP4 To EHP6 up-gradation. I tried to confirm process order XXXXXX with T-code COR6N.
    In this process order there 2 phase for 2 activity. Now when I entered the order in COR6N I click on enter its automatically taken 2nd phase.
    Its by-pass the first phase. I have to confirm the 1st phase but its not showing.
    Please let me know where is the problem ...what configuration i m missing.
    Thanks,
    Anurudh

    Hi PP guru,
    Thanks all of you replay my problem is resolve now. 2nd phase not showing there because confirmation is possible but not necessary so when I click on f4 its not showing.  I entered it manually after that it taken it and showing activity also.
    So thank u friend once again.
    Thanks
    anurudh

  • Issue with color profile image processing

    Their seems to an issue with the iPhone displaying an image which has a Color profile of: Generic HDR Profile. The image appears very dark and nearly unviewable. This has been frustrating to trouble shoot becasue the image will display correctly on the computer, but when it is viewed on the iPhone it looks completely different. When images have other color profiles such as sRGB the images will look the same on both platforms. When an image has a Generic HDR color profile it will not display correctly on the iPhone. 
    Anyone else come across this problem?

    When PSE gets weird, the first thing to do is to reset the preferences. Go to the editor preferences>general, click this button and restart the editor:

Maybe you are looking for