Process Order error during TECO

Hi gurus
The user is encountering an error with her Process Order. When she is trying to TECO the order, an error pops out saying "Cancel Scheduling" is not allowed. SAP says that the current status of the object prohibits 'cancel scheduling'. The process order has the following statuses: REL PCNF DLV PRC BASC BCRQ EXPL EXTS
Please help

Hello Obie,
Please try the following steps
Reverse all the confirmation (Goods receipt against the order)
Then Re-read the master data
This will flip the status of the order to CRTD (created) and all the operation will be back to initial .
Release the order and confirm the qty which was cancelled in first step
Now try to TECO the order.
If you are still gettting the error then let us know.
I hope the information helps
Cheers
Kaushik

Similar Messages

COHVPI-closing process order error

Dear all,
Some of the process order is in TECO status
I need to close the order.
While doing mass process order to close the order by using COHVPI tcode,i got error for all material
Inspection lot xxxxxx for the order xxxxxx does not have necessary status.
By using qa32 i checked,for that lots status is released.
So i tried to make results entries and usage decision,But no characteristics was maintained in results,so we are not able to do usage decision.
The error message which i got for the materials ,inspection type was 03.
So kindly let me know how to process it.
Regards
Rajasekaran

To process them cleanly, you should have at least one characteristic result recorded. Why have you created an 03 lot with no inspection characteristics to begin with?
What is the error message when you do a UD? You should be able to do a UD on those lots where the order has a status of TECO.
Craig

Service order-Error during account assignment

HI experts,
I am facing a problem in CRM when saving Service Orders.
Issue:No account assignment found for this service process
An error has occurred in the system XXX while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system.To view the error messages,see the enclosed log.
Transmission log
No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
Actually,We have a problem about service order,how to integration with WBS element.
We can see Account assignment in service order item from GUI,but search help is nothing.
Account assignment is missing in UI.
If anyone know it,please share with me.
Thank you.

Hi Fan Ding,
1. Would you please check the Controlling integration settings in CRM and ECC systems.
Most importantly, Replicate service characteristics relevant to controlling
Assigning cost centres to service org units
Establishing controlling type, controllin glevel and scenarios
Assigning plant and storage location to service org units
etc.,
2. Please check whether Sales/Service organization assigned to Billing unit and in turn the Billing Unit is assigned to company code or not.
Regards,

Process order error

HI All,
My user created a process order.
It had three operations and it had been confirmed.
Due to some mistakes, he had cancelled two confirmations.
But he cant able to do cancellation for the final confirmation.
For the final operation Milestone indicator is activated.
Now i need to reverse all the postings and cancel all the confirmations and i want the process order to be in a new status.
Now the process order status is REL MSPT PRT PCNF DLV PRC BASC BCRQ*
How to proceed.
Kindly help me in this regard
Regards
KK

HI,
Thanks for the reply
In process order the deliver qty is 2,812.400.
If i execute the transaction MB31 by using process order number and mvt type 102 its picking the qty same as 2,812.400.
Its picking only one material 20716 with 2812.400 qty.
But i checked in COGI for material 20716 the qty is 201.100kg.
Then will the error deficit of stock of 2442.500 qty.
How to proceed.
Regards
KK
Edited by: Kishore Kumar Galla on May 29, 2009 4:20 PM

Process order closing when TECO...

Hi Gurus,
Can anybody help me to close the process order having status as...
" TECO PRC BASC BCRQ CNC MANC SETC VCAL"....
In short...The order was not released and confirmed....Just the order was created and then TECO'ed....
Thanks,
Ameya K.

Hi Ameya,
You can only perform (business) closing for a process order if:
The order has status Released (REL), Control recipe created (CRCR) or Control recipe discarded (CRAB), or Technically completed (TECO). To have status Technically completed, the order must have already reached status Released.
The order balance is 0.
There are no more open purchase requisitions, orders, or commitments for it.
All data related to the process order is available and correct (For example, the inspection lots for the order must be completed).
There are no future change records from the confirmation processes.
So revoke TECO, set to REL , then change to TECO & CLSD.
Hope this resolves your issue
Venugopal
Reward points if it helps you

PROCESS ORDER CONFIRM DURING UD

Hello Experts:
Here's my question concerning a customization in QM issuing UD.
Std. results recording has been completed and valuated:
UD is customized to require user to confirm all operations including QM operations have been Process Order Confirmed. This is o4 inprocess manufacturing.
When attempting to enter UD, error pops up indicating QM Operation XXXX has not been confirmed, do so to complete UD.
Please explain the steps to execute P.Order confirmation via the COR transactions.
Appreciate.
Verroz

Go to CO11N
Enter process order and Operation xxxx in respected field and save the transaction. Do for all unconfirmed operation or for which you getting error message.
You will be able to UD.

Process Chain error during info package execution

I'm trying to load master data into 0CURTYPE using process chain.
I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
On scheduling the process chain I get an error during the execution of the info package
"Could not find code page for receiving system
For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
Is it relatred to some setting whihc I have missed out?
Any help on this please?
Thanks,

Hi, this is a issue related to idocs in the source....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
this issue belongs to source...
They have to run a report:RBDAGAIN to process the errore idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
if this occurs regularly they have to change the settings in SM59..
refer exact note for this: 784381
rgds,

Message No V 0102 (Sales Order Error During Saving)

We are using SAP ECC 6 version and the client is related to Beverage Industry.
Problem:
The scenario is this that we created a Sales Order. In the Sales Order we have entered let say 20 items and the item have sub item as well. We are using BOM usage 5. Once the order is confirmed the user creates the Delivery Order but doesnt Post the Good Issue.
Now the requirement is that the user wants to change and delete some item in sales order.
For this first we amend the delivery order and then we change the sales order according the amendments made in Delivery Order.
In this scenario we also want to completely delete the Main item but as its default that the Bom item will be deleted with the main but we want to enter the sub item again in the order because its the process requirement.
Now when I make all the necessary changes in Delivery Order and Sales Order Respectively System saves the Delivery order with the changes values but gives an error message after Saving the Sales Order and doesnt update the Sales Order as well
Attached are the Screen Shot of Sales Order Error Screen.
Note: This Error comes randomly

Refer OSS 740280

Processing overdue error during delta extraction from datasource 0CO_OM_CCA

Hi,
I'm getting "Processing overdue error" in BW while extracting delta from datasource 0CO_OM_CCA_9. all other extraction jobs from R3 -> BW are successful. Even Delta init on this datasource is successful & problem is only with delta package.
I appreciate if someone could provide information based on the following error details on this issue.
here are the extraction steps we followed.
Full load of fiscal years 2006 & 2007 Into transactional cube.
load budget data into transactional cube.
compression of the cube with "0 elimination"
Delta Initialization with fiscal period selections 1/2008 to 12/9999
all the above steps were successful.
and when delta package is scheduled, we are getting following errors.
BW system log
BW Monitoring job is turning red with following message.
Technical : Processing is overdue
Processing Step : Call to BW
Sending packages from OLTP to BW lead to errors
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in
the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely
connected to the SAP BW. Check especially the authorizations of the
background user in the source system.
R3 Job Log
Even after BW job turns to red, R3 job continues to run for 2 hours and
eventually gets cancelled with an ABAP dump & here is the log.
Job
started
Step 001 started (program SBIE0001, variant &0000000110473, user ID
BWREMOTE) DATASOURCE = 0CO_OM_CCA_9
Current Values for Selected Profile Parameters
abap/heap_area_nondia.........2000000000 *
abap/heap_area_total..........2000000000 *
abap/heaplimit................20000000 *
zcsa/installed_languages......EDJIM13 *
zcsa/system_language..........E *
ztta/max_memreq_MB...........2047 *
ztta/roll_area................6500000 *
ztta/roll_extension...........2000000000 *
ABAP/4 processor: SYSTEM_CANCELED
Job cancelled
Thanks,
Hari Immadi
http://immadi.com
SEM BW Analyst

Hi Hari,
We were recently having similar problems with the delta for CCA_9. And activating index 4 on COEP resolved our issues.
Yes, by default there is a 2 hour safety interval for the CCA_9 DataSource. You could run this extractor hourly but at the time of extraction you will only be pulling postings through 2 hours prior to extraction time. This can be changed for testing purposes but SAP strongly discourages changing this interval in a production environment. SAP does provide an alternative described in OSS note 553561. You may check out this note to see if it would work for your scenario.
Regards,
Todd

Stock Transfer Order Error during PGI in VL02n

Hi Experts
I have configured a stock transfer order with the following details
Purchase Order STANDARD Doc Type NB item category field is blank
Mov Type 647 & 641
Delivery type NLCC
Created outbound delevery in VL10B
But in VL02N during PGI getting error that Purchase Order xxxxxxxxxx does not contain items for stock transfer
Pls let me know what setting are missing ?

Dear,
As per my little knowledge I pesume that the error is because of wrong P.O. Types has been used in STO.
Kindly use P.O. Type UB and item category as U and retry ur process.
Regards
AJIT K SINGH
HAPPY TO HELP U

Service order - Error during account assignment - Avoid the transfer to ERP

Hello SAP Experts,
I am facing a problem in CRM when saving Service Orders. An error is coming from my ERP system because the system is trying to tranfer the cost from the CRM Service Order to R3.
This is the error: Orgfinder: No value found for Organizational Unit BILL_ORG
I don't need the transfer of costs to the ERP. Can anyone tell me how we can deactivate this option? The item category is relevant for pricing but it is not relevant for invoicing and costs.
Please help.
Thanks in advance and regards.

Hi Savan,
SAP CRM Status Management is a part of SAP CRM Basic or Base Customization and the link is available in the following path
IMG --> CRM --> Transactions --> Basic Settings --> Status Management --> Change Status Profile for User Status.
Here you can influence the status. You can also have a look at the status profile documentation here
[Status Profile|http://help.sap.com/saphelp_crm70/helpdata/en/92/8269126d1547578aab640f097de32c/frameset.htm]
Hope this will help.
Thanks,
Samantak.

Return Sock Transfer Order - Error during goods receipt

Hello,
STO from store A (issuing) to store B (receiving) of 1 units
MAP = 10u20AC
Transfer Price (Z01)= 20u20AC
financial document is:
BSX............................-10u20AC...............................store A
BSX............................20u20AC.................................store B
Z01.............................-20u20AC.................................store B
Z01...........................10u20AC....................................store B
This means that goods issue from store A is MAP evaluated and receipt in store B is regarding transfer price, then we have unrealized profit account for the diference (which are the last 2 lines for condition type Z01).
When I'm doing a return STO and I tried to do GR in the store A system gives me error message M7301 "Value of the goods movement is negative".
Do you know how can I handle with this in order to have:
BSX............................10u20AC...............................store A
BSX............................-20u20AC.................................store B
Z01.............................20u20AC.................................store B
Z01...........................-10u20AC....................................store B
Thanks in advance.

are you following the path PO return by the received plant using 161 -deliveryPGR ?

TECO process order in CORK User exit (ZXCOFU10)

Hi,
I am trying to implement an auto-TECO process during confirmation (CNF). This process should change the process order status to TECO and also update the TECO date (AUFK-IDAT2). Using CORK userexit, EXIT_SAPLCORF_405 (ZXCOFU10), I tried using STATUS_CHANGE_FOR_ACTIVITY function module but it doesn't update AUFK-IDAT2 field.
I tried also using BAPI_PROCORD_COMPLETE_TECH as well but there seems to be a problem using this BAPI in this userexit. I can't seem to reverse the confirmation after this process. Before the BAPI, I inserted a COMMIT WORK AND WAIT. Does this have anything to do with the problem?
I tried using Call transaction 'COR2' but this does not work since the process order is locked to CORK.
Is there a way to change the status of the process order to TECO during this userexit and update the TECO date (AUFK-IDAT2) as well? Is BAPI the way to go or is there another way?
Thanks,
Kaine

are you passing all the key info to the RESBD table..
Did you checked it in debug mode.
vijay

Error when convert planned order to process order

when using tcode COR7, unable to convert planned order (make to stock) to process order.
error message: No default value is maintained for operation generation for order type ZI03
note: order type is customised.
please assist where to check or maintain the default value..TQVM

Dear ,
Create default operation for the process order type and plant combination in OPJG and then check for converting the planned
order to process order.
If you want the system to automatically pick the master recipe,then make the necessary settings and selection ID for the process
order type and plant combination in COR4.
Check and revert
Regards
S Mangalraj
Edited by: Mangalraj.S on Sep 24, 2010 1:51 PM

Global Standard for TECOing Process Orders

Hi All,
Is there any standard rule for how long it should take for a process order to be TECO'ed?
Currently our PO's get TECO'ed anywhere between 2-8 days after confirmation. But we do have them all TECO'ed prior to month end. I would prefer to set a general rule (based on global and benchmarking standards) on how many days it should take us to TECO them.
Appreciate your help and inputs.
Thanks,
Deeksha

Dear Deeksha,
Once the process order has been confirmed with final confirmation or say the complete confirmation,goods movements(Gi&Gr)
activities are completed,then the TECO status can be set on the same day of final confirmation and GR or else on the next day.
If my understanding is correct then SAP suggests to set the TECO status once the shop floor activities are completed and no
where I could see the no of days for performing this activity.
If required this can be individually set at process order level in COR2 or else as month ending activity by setting TECO for a list
of process orders using T.Code COHVPI.
Check and revert back.
Regards
Mangalraj.S

Process Order error during TECO

Similar Messages

Maybe you are looking for