Process to secure different files on the basis of their filename

Hello everybody,
I would like to know if It's possible to batch processing feature with the Acrobat standard version 9. I think that's not possible with the standard version.
I want to securize a pdf files collection from their filename with different passwords (one different password per file) in an unique process (shell). It's for a payslips' application.
The Questions:
- What's the best version to deploy this subject, standard or professional?
- Do I need the SDK or API or only needed Acrobat Professional with batch processing technique?
How would you do that?
Thanks!

Hello Leonard,
Thanks by your answer, but I'd like to sure about this to adquire the proper license of product.
Then, as you say me, I need to write script/program to automate Acrobat...  Do I need the Acrobat SDK?
Can I do it with the Acrobat Standard version?
Thanks!

Similar Messages

  • Can two users work on different files of the same project?

    Sorry if this has been asked already...but can two users work
    on different files of the same project? How would that work? Would
    it work something like this?
    1. From RoboHelp 7, user A checks out the entire project.
    2. User A checks in the files they are not working with.
    3. User B checks out the project but can only 'edit' the
    files that have been checked in by user A.
    Is this how the source control works?

    That's the basic idea. User A doesn't actually have to check
    out the whole project, though. RSC will selectively check out only
    the files that are actually getting changed. Both writers will have
    a complete copy of the project on their local machines, but the
    files are read-only until they are literally checked out, which is
    on an as-needed basis unless the writer explicitly checks them out.
    G

  • How to create links to different files on the same page?

    Good day to all again,
    can someone please guide me through creating several links to different files on the same page. In other words, I am creating a photo page where my links are called Gallery 1, Gallery 2, etc... I would like to create links so when the User clicks on Gallery 1, they see Gallery 1 slide show in the frame; when the user then clicks Gallery 2, then they see Gallery 2 slide show in the window.
    My slide show files are done and I am using GoLive CS2. I have no knowledge of JavaScript or ActionScript/Flash.
    Any suggestions are highly appreciated.
    Thank you
    Alek

    Hi Diana,
    I'm a professional photographer and in the process of getting
    my finished site published. I used Coffeecup Photo Gallery. You can
    create multiple albums on the same page. Do a Google search for the
    address. It's easy, inexpensive, and it works. I tried to do this
    with the Photo Gallery in DW and FireWorks--but couldn't get it
    right. CC uses Flash and Javascript.
    Good Luck

  • How we can restrict record in CTL file on the basis of other table ?

    Hello all,
    How we can restrict record in CTL file on the basis of other table ?
    Eg.
    I have following control file to load the records in the table through the sql loader.
    LOAD DATA
    INTO TABLE THIST APPEND
    FIELDS TERMINATED BY "|" TRAILING NULLCOLS
    LNUM POSITION(1) Char "substr(:LOAN_NUM, 4, 13)",
    TSRNUM Char "rtrim:TRAN_SR_NUM)" ,
    TPROCDT Char "to_char(to_date rtrim:TRAN_PROC_DT), 'MMDDYYYY'), 'YYYYMMDD')"      
    I have another table c all TFILE in which I have LNUM. I want to import only those records from input text file using the control file and sql loader in which LNUM is exist in the TFILE.
    So how i can restrict it in the Control File.
    Thanks
    Kamlesh Gujarathi
    [email protected]

    Hello Satyaki De.
    Thank you very much for your suggestion but my Private information is totally apart from this question & I already I have changed each and every information from the question.
    Thanks
    Kamlesh Gujarathi
    [email protected]

  • Is it possible to place different files on the desktops in different spaces?

    I have 6 spaces set up and would like to have different files on the desktop of each space.  Currently every file is on every desktop.  Is it possible?

    Thanks for the quick reply Daniel.  Not the answer I was hoping for but at least I know to stop looking!

  • Display different roles on the basis of Desktops loaded.

    Hi
    i hav created a URL alias Rule.
    I am loading different desktops on the basis of URL alias at runtime...
    Scenario is :
    Suppose my user is assigned 2 roles.
    I Wish role 1 must get displayed only in desktop 1
    Role 2 must get displayed only in desktop 2
    What is happening :
    Whatever desktop is loaded, both roles are getting displayed.
    Because both roles are assigned to authenticated user, thats y both are getting displayed.
    Is there a solution for this...
    By ant means....coding, configuration......anything which could be done...

    Saurabh,
    Please refer to this thread.
    Dynamic portal Themes
    Refer to the blog in this thread for clarity.
    Good Luck!
    Sandeep Tudumu

  • Webcrawler issue: Downloads different file than the one visible in browser

    Hi Everyone,
    I am using a webcrawler to download webpages from a site. But it seems to be downloading different HTML files from the ones I can see in the browser. Someone suggested that I might try and setRequestProperty() to fake a browser.
    Could anyone tell me how to do that? I would really appreciate that. A pointer to a website would also be great...
    Thanks,
    Sameer

    Hi All,
    Thanks for the replies. The program can download the HTML pages correctly, apart from one missing column in a table in each page (which happens to be important for me!).
    I am getting the HTML files using HttpURLConnection.
    It has been pointed out to me by another someone :) that this might be due to the fact that the site requires a login, which I completely forgotten when writing the code. So that someone seems to suggest that adding code for setting cookies might solve this issue. Can anyone lead me through the process briefly? Or point me to documentation?
    Thanks again,
    Sameer
    What do the files you get look like ? Error pages ?
    Default pages ? How are you getting them ? HTTP by
    hand ? HttpURLConnection ?

  • 2 different files in the same location?

    When we upload files they go all in one folder.
    The first editor calls his graphic "Picture 1.png" (wonder where that came from..)
    Sure sometimes before the item gets deleted another one will upload an completly different picture with the same filename.
    The thing that it different between the 2 would be the Asset ID. So I was wondering if there is a way to make folders with asset IDs in the location where everybody uploads there stuff to.
    To tidy up on the long run I guess we just would need to delete the empty folders (as the content has been archived).
    How would I do this? How do other people deal with the same filenames for different files? It even happens within the same production so the solution to create an subfolder for each production (read this a while ago) does not work for us.
    I know that for future projects we will tell people to use more describing filenames (but even there: there might be two different kitchens called the same..) but I also talk about a huge, messy archive to migrate..
    thanks
    tobi

    Let me rephrase things a bit as I used the term Excel chart  to literally. We create charts in SSRS. We then use a query string that includes "rs:command=render&rs:format=Excel" to get the chart into Excel. The "chart" in Excel is really just an
    image and the associated data table is the cells filled in with the data. We then "select" the area that encompasses all of these objects and paste that into the PowerPoint slide.
    Our source folder structure is as follows (note that I while I am being generic, the Ecel file names are the same between folders:
    Folder A: File1.xls, File2.xls, File3.xls ..... File40.xls
    Folder B: File1.xls, File2.xls, File3.xls .....File40.xls
    This goes on for 8 folders but can be as many as 30
    The routine we use to create the xls file from the SSRS chart names the xls file and puts it in the correct folder.
    The idea was we would create a template chart set in PPT for folder A and then create copies of the PPT and change the links to point to Folder B, etc.
    We have ensured that all Excel Documents are closed when we try to do an update.
    We are also getting the following error and I'm paraphrasing: Cannot open multiple instances of a file of the same name even if it is in a different location. This occurs when doing an update links when we don't get the initial error message I listed first.
    If we change the names of the files in each folder: i.e. FolderAFile1.xls, FolderAFile2.xls, etc then we can do the update links. This is time consuming as the SSRS exports are done by the end users and we are the developers trying to create a reusable solution.
    One other issue we are seeing which I hope you can address is that when we are getting the update links to work, the process opens up each Excel file THREE times. It takes almost 15 minutes to update a PPT with 18 linked xls files.

  • How can I read different files in the file adapter

    Hi,
    I have a scenario like file(content conversion and FTP) to Proxy and need to read 2 files which have different structures.
    The file structures is as follows.
    FileA.txt
    EMPID, Designtion,code,DOB,dept,deptID and 13 fields etc..
    FileB.txt
    officercode, dept,workspecs,FLAGarm,FLAGfoot and 27 fields etc.
    Both files needs to be read by the file adapter at same time and should send to the proxy to feed in ECC.
    Please help me in designing the above scenario with or without BPM.
    Thanks
    Manmadha

    Hello,
    Since u want to combine the two files from sender , you need to use BPM for it.
    First of all create Mapping. In your mapping program go to messages tab and add the two source messages types and in the target add the target message type. Come to your design tab and design the mappings.
    BPM:
    -- Insert Fork with two branches necessary condition. In first branch insert Receive step and check start process checkbox.
    --In second branch insert Receive step and check start process checkbox.
    -- Insert Transformation step after Fork branch step.
    -- Insert Send step [the outcome of transformation step needs to be send]
    Design the above structure, if you have any doubts, dp reply back.
    Best regards,
    raj.

  • How can open a html, pdf files from the server (c:\foldername\filename)

    Hi all,
    I am developing an application. in this app i have to implement RMI.
    My problem is this, How can a client open a files from the server.
    all the html, pdf files are stored in the server's directory like C:\audit\filename.
    There is a folder on the server's C directory which contains all the html , pdf files.
    please tell me how can a client open a file from the server using RMI.
    Please send me the solution as soon as possible.
    Thanks & Regards
    Bhavishya

    That's doing it the hard way. Why not use HTTP or FTP?

  • Opening different files within the same loop

    Hi folks,
    I am currently trying to automate a testing procedure using LabVIEW
    that requires the user to select the test from a drop down menu (Ring)
    and then clicks a button to start the test. When the button is pressed
    an 'open file' window appears asking for a name to save the file as.
    This all works fine the first time it is run, but i need to be able to
    stop the current test, select a new one, and then choose a different
    filename to save it as, without having to restart the program.
    I am currently using a timed loop (as the test is time specific) and
    case statements for each individual test routine. I can only think of 2
    ways to implement this, the first works only once (asking for a
    fliename when the program is first run), the second repeatedly asks for
    the filename each time the loop frame executes.
    So the process is: select test - click button - chose filename - stop
    test - select new test - click button - choose new filename -
    etc.......
    Thanks in advance,
    Darren.

    There can be many ways to do this
    One way would be, to keep the file read operation inside a seperate case stucture ( inside the while loop itself)
    and use a boolean switch ( mechanical action>> Latch) and read a new file at each click of this button
    look at attached VI, probably you can build on its logic
    Attachments:
    file read.vi ‏86 KB

  • Files on the base URL

    How can I explore / search for files on a Applets base URL. Is there a simple way to do this without using servlets or some kind of java security programing ?

    You need to give more info. Are you trying to look on
    your machine, some web server in your company, or the
    internet in general?The applet will be running on a WEB-server on a intranet or on internet.
    The idea is that the applet will display information from a selection of text-files, the text-files will also be stored on the same server as the applet.
    The number and the names of the text-files will be chaning but the storage location will be the same, ex a directory on the same area as the applet itself.
    What i need to do is to find out which files are stored in the directory, display this in the applet in order for the user to chose the file of interest.

  • Could threads of a same process run on different CPU in the same time ?

    Hello,
    probably stupid question..., but I would like to understand if several threads inside a same process can run in the same time on separate CPU.
    If the response is positive, how can I bind a thread on differant CPU using C API ?
    Also what is the algorithm implemented by Solaris for the laod balancing ?
    Is there any white paper on this subject ?
    Thanks for any tips

    Threads in the same process can run at the same time on separate CPUs.
    You can bind a thread to a CPU using the processor_bind(2) API.
    That algorithm is not public. You will have to wait for OpenSolaris so that you can look at the implementation at that time.
    There is much public documentation on Solaris threading support on the web. Use google. The following document provides a good historical context of Solaris thread support.
    http://www.sun.com/software/whitepapers/solaris9/multithread.pdf
    Gary

  • Applet security -- accessing files over the Web.

    I guess the topic pretty much sums up my question..
    I have an applet and I want to read a file from over the web.
    After creating a URL, I try to retrieve an inputstream by calling openStream() but I get all the java.security.AccessControlException: access denied rubbish..
    How do I get it working ?

    The applet can only read data from the server where it is saved. For security purposes applets have limited capabilities. They can't write data to a remote hard drive or read data from remote machines. A way around this is to create a "trusted applet". Basically what it does is informs any machine you are trying to access that you wrote this applet and are responsible for any negative outcome. There is a tutorial provided by Sun that can explain this better than I can. Here is the link:
    http://java.sun.com/security/signExample/index.html
    Good luck.

  • How to read the contents in the excel file on the basis of colunm heading?

    Hi,
    Here is my requirement like that  in excel file i got the customer number , amount etc....
    And my required fields are customer and amount. In file customer nr is under the heading 'CUSTOMER' and amount is under the heading 'AMOUNT'.
    Is there any FM for reading the contents under the colunm heading of excel?
    Please suggest me.
    Thanks,
    Harshal kulkarni

    Hi Harshal ,
    I dont think there is such function module /BAPI/Class-Method .
    but if your excel file is dynamic you can write your own logic using field - symbols.
    Regards ,
    Praveen

Maybe you are looking for