ProcessdpCommandEx error when adding or removing object from WebI report (based on BEX query) query panel object list

Hi,
We have WebI reports build on BEX using BAPI connectivity. When we are trying to add a object in query panel in a existing report we are getting this ProcessdpCommandEx error. But error does not appear when we add at the end of the list of objects already added.
Can you calrify whether this could be some setting issue or it is a known bug?
Can you share SAP Note No in case it is a known bug?

Hi Avijit,
This error occurs in case of any failure in the connectivity. It is like the data providers are not getting processed.
You have mentioned that the issue does not come with newly created reports
Are you creating new reports on migrated universe or a newly created universe?
If issue only comes with migrated universe, please check if the connection has been migrated properly and required middleware and database connectors are in place.
If connections are in place, try importing and exporting the universe once and check.
In case, new report works fine with migrated universe, then you can simply try to re-point the universe by editing the query and can run it again and check.
Regards,
Yuvraj

Similar Messages

CDZHome Error when trying to connect universe from Crystal Reports XI R2

I am getting the below error message when I am trying to connect a universe from Cyrstal Reports.
CDZHome not found on server, IRAPPS437.WebIntelligenceProcessingServer
I am using below versions:
Universe - Business Objects XI 3.0 Enterprise Edition
Crystal Reports - Cyrstal Reports XI R2 SP4.
If you notice the error is related to Web Intelligence when I am not doing anything related to Web Intelligence. So I suspect that Cyrstal Reports XI R2 is not compatible with BO XI 3.1 or Vice Verse.
Any input on this is appreciated.
Cheers,
Kanna

Hello All, I am working on BO version migration. Presently we have BO XI 3.1 in which we have Java process through which we gets connected to BO server and generates an report.
as we need to move to migrate BO version to SAP Business Objects BI Platform 4, we need to accomodate connecting to new BO server. I have upgraded all JAR which has been given by "SAP Business Objects BI Platform 4" installation still i am getting below exceptions and one of them is almost same as this POST so thought od posting my question here rather than opening an new POST.
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$ServiceConnection: Unable to connect to service CDZHome from server LONWS20055.WebIntelligenceProcessingServer via CMS LONWS20055.EUROPE.NOM:6400 (FWM 01006)

Error when exporting to other format from crystal report

Hi,
I have been facing an error "Method 'IRCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version = 11.0.3300.0, Culture-neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overriden." while trying to export the crystal report to another format (e.g. pdf and excel) from an application from a software vendor.
For your information, the machine OS that is running the application is Window 7. Before I did the installation of the application, it already has Visual Studio 2005 and Crystal Report XI Release 1 installed in the Window 7 system. After I had the above error, I went to search more information on the website and found out that I need to upgrade to Crystal Report XI Release 2 from the search results. However, after I upgraded from Crystal Report XI Release 1 to Crystal Report XI Release 2 and apply service pack 6, I still faced the same error when I tried to export. I even tried to uninstall Visual Studio 2005 and Crystal Report XI Release 2 but I'm still facing the same above error while exporting. I also tried to reinstall the application from software vendor but the same error come out.
Your help is highly appreciated. Thanks!!
Regards,
Jennifer

Good morning Jennifer
When you say:
" I also tried to reinstall the application from software vendor but the same error come out."
I wonder if the app you are trying to install is from a 3rd party vendor / developer? If it is, installing CR XI r2 (11.5) will not resolve the issue for you. From the error, the app was compiled with CR XI R1 (11.0) and the only way to get that app to use CR XI r2 will be to recompile it with CR XI r2 assemblies. E.g.; you will have to have access to the source code and then recompile the app, ensuring that you are referencing CR XI r2 assemblies. Or am I missing something here?
Ludek

Error when Adding a BW Attribute to WebI

I created an universe based on a BEx query. The Query/Universe contains about 10 Characteristics. When I run the query only with characteristics it work fine.
When I choose attributes from one characterstic I am getting an error "Error at MDDataSetBW.GetCellData. Systems error in programm CL_RSR_MDX_BXML_FLATTENING and form ASSIGN_COMP-02 (WIS 10901)".
When I add attributes from other characteristics it works fine. The only difference that I see is that the charactersistic that causes the error has a hierarchy.
Edited by: B.Wegner on Nov 22, 2010 1:20 PM

Hi,
Go through the below SAP Notes on the issue-
SAP OSS Notes 1440912 and 1432162
Hope you will get the proper info.
-Noor.

Error when using RTF as type of web report

When I use RTF as type of web report ,the program will exceptionly terminate with exceptoin.When I use html,Pdf format,it work well.Who can help,Thanks in advance.

It seems your browser is not properly configured to handle RTF content. You can try to load a local RTF directly into your browser and see if that works.

Not able to merge dimensions objects on webi report based on SAP query

Hello
We are using SAP BI 7.0 , BO XI 3.1 sp1
I have two queries in webi report. These two queries are based on the same universe. I am not able to merge dimensions from both queries as merge dimensions functionality is greyed. Two dimensions are of the same type (char) and are dimensions (not the details).
Does anyone know the reason?
Thanks

Hi,
First check your user ID has rights for merge dimension.may be you can try on other universe and see if it is still grayed out then possible rights issue.
or may be you can check below thread.
http://www.forumtopics.com/busobj/viewtopic.php?p=784845&sid=73804295827b0854dc3a654cf74fda92
Thanks,
Amit

Error when call a interactive form from a report.

Hi everybody!
When i use report SAPBC480_DEMO to call form BC480_FINAL, i have the error ADS: Request start time:.......
I don't know how to fix that error. Can anybody help me?
Thank!

Hi Duo,
i was facing similar problems. It could be solved by installing the Reader Right Credentials. If you want to use a pdf with editable fields (no read-only document) you have to install the RRC. Check this url
[http://help.sap.com/saphelp_nw2004s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/content.htm]
and notes 736902 , 1016404.
if you start stack trace as mentioned in note 1016404 you will be able to get through.
Regards,
Ashish Shah

Error,when executing "contents in the cube & a report in the bex analyser"

Hi,
If i execute a cube contents,i am getting this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
When we execute a query in the BEX, we got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar.

Hi Dhanya,
thanks for your quick response,
it is helping more for me,
but i have some query's for this.
ie i made proper installation for activation 0infoprov(BusinessContent info objective) at BI Content Level. but it appears as inactive mode at modeling level. when,i made activation of 0infoprov, it is asking "0LOGSYS" must be an attribute, but i given "0LOGSYS" as attribute for this 0INFOPROV, however it shows some other errors at the time of activation, it appears as Inactive mode only, means it is not activating at this modeling level.
At the time of activating "0infoprov" it is asking, insert the "0logsys" must be an attribute.why?
the info objective 0infoprov is appears as inactive mode at modeling level0.
please let me know,what will be the problems for activating "0infoprov".
plz respond quickly.
kumar.
Edited by: kumar kumar on Dec 10, 2008 5:35 AM

Getting an Error WIJ20002 while trying to create a webi report in infoview

Hi,
We are getting an error " The Webintelligence Report Panel cannot connect to the server.Close the report panel and try to connect again or see your Business Objects Administrator ( WIJ20002)" only for a single universe.
Please suggest how can we fix this error.
Regards
Chaitanya

I am giving you couple of scenario based on which this error might occur.I include below a selection of what would seem to be the more relevant ones in your case. Please review these and try the suggested solutions and then let us know the outcome in each case.
Scenario1:
When creating a new document based on linked universes in InfoView 6.5.x, the following error message appears:
"The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 2002)."
When you click on details, the following error message appears:
"java.lang.IllegalStateException: Cannot load DS; no ID set
at com.bo.wp.om.OMDataProvider.getDataSource(OMDataProvider.java:192)
at com.bo.wp.tc.TCMain.newDocument(TCMain.java:807)
at com.bo.wp.tc.TCMain.initDocument(TCMain.java:649)
at com.bo.wp.tc.TCMain.initClient(TCMain.java:1253)
at com.bo.w.tc.thread.InitAppletRunner.run(InitAppletRunner.java:82)
at java.lang.Thread.run(Unknown Source)"
Resolution:
In Supervisor, the user does not have the Import Universe right in the designer.
Enable the Import Universe right for the user, and ensure they have rights at the user and group level.
Scenario2:
In BusinessObjects version 6.5, when attempting to create a new WebIntelligence report using the Java Query Panel, one of the following error messages appears:
"The Web Intelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your Business Objects Administrator (Error: WIJ 20002)"
or
u201CWeb Intelligence cannot retrieve this document due to a server problem or an error in the document structure. See your Business Objects Administrator".
Also, the bottom of the Java applet window states Launching new document.
Resolution:
The error messages occur because either the universe file name contains an ampersand character (u201C&u201D) in the name or the .unv or .unw files used by the Java Query Panel have become corrupted.
To resolve the error messages
Navigate to <installation directory>:/Business Objects/BusinessObjects Enterprise 6/nodes/<server name>/<cluster name>/universes/.
Remove the .unv file for the derived universe.
Navigate to <installation directory>: /Business Objects/BusinessObjects Enterprise 6/nodes/<server name>/<cluster name>/universes/<universe domain name>/ucdz.
Remove the .unw file for the derived universe.
Remove the ampersand character ("&") from the universe name.
Scenario3:
Problem:
Error: "The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 20002)" when you try to open the Java Report Panel.
Resolution:
****CONFIGURATION*****
WebIntelligence version 6.1b
Windows 200 Server SP4
IIS 5
JDK 1.42_03
**********SYMPTOMS******
You try to open the Java Report Panel and you receive the following error:
"The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 20002)"
*********CAUSE*************
You do not have the correct permissions to access files from the wiasp virtual directory. The virtual directory and all sub-directories were initially configured to use "Scripts only" or "None".
*********RESOLUTION*****
Here are the steps to follow:
1. Open the Internet Information Services Manager Console.
2. Expand the "Default Web Site" and "wiasp" directories.
3. Right-click each of the following directories, and in Properties for each, set the respective value for Execute Permissions:
scripts = "Scripts"
viewers = "Scripts"
bin = "Scripts and Executables"
classes = "Scripts"
onlineguides = "Scripts"
help = "Scripts"
distribution = "Scripts" or "None"
Scenario4:
Problem:
Error: "WebIntelligence Java Report Panel cannot connect to the server (WIJ 20002)" when attempting to create a new report
Resolution:
****CONFIGURATION*****
WebIntelligence 6.5.x
**********SYMPTOMS******
You attempt to create a new report using the Java panel based on a universe. The universe list appears as expected, but upon selecting the universe you receive an error similar to the following:
"The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (WIJ 20002)"
*********CAUSE*************
There is a connectivity issue to the universe and/or document domain. The universe list is still displayed because that information is cached.
*********RESOLUTION*****
Here are the steps to follow:
1. Log into Supervisor as a General Supervisor.
2. Go to Tools > Repository to open the Repository Management dialog where domain connections are listed.
3. Test the document and universe domain connections and update where needed to establish connectivity.
Scenario5:
Problem:
Error: "WIJ 20002" when launching the Java Report Panel on a Windows 2003 Server.
Resolution:
****CONFIGURATION*****
WebIntelligence version 6.5
Windows 2003
IIS 6
**********SYMPTOMS******
You launch the Java Report Panel on a Windows 2003 Server and receive the following error:
The WebIntelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your Business Objects administrator. (Error: WIJ 20002).
*********CAUSE*************
This error message appears because ISAPI (Internet Server Application Program Interface) extensions are disabled by default on IIS 6.
*********RESOLUTION*****
Here are the steps to follow to enable ISAPI extensions:
1. Click Start > All Programs > Administrative Tools > Internet Information Services (IIS) Manager.
2. Expand the "" beside the server name by clicking the "" icon.
3. Select "Web Service Extensions."
4. Select "All Unknown ISAPI Extensions" from the right pane and click "Allow."
5. Restart the IIS web server.
I know it's a bit long but i hope this will help you to some extent in troubleshooting WIJ2002 Error.

Receiving an error when trying to remove P00 Security role from the user

Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
Vineet

Hi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore

Error when attempting to IMPORT object "TS_CHECK".

When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
The following short dump occurs:
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          19.11.2008 15:14:08
Short text
Error when attempting to IMPORT object "TS_CHECK".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTD4" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "TS_CHECK", the component no. 4 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLSTD4".
The data type is "I" in the dataset, but "N" in the program.
Missing RAISING Clause in Interface
Program                                 SAPLSTD4
Include                                 LSTD4U03
Row                                     1
Module type                             (FUNCTION)
Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
Trigger Location of Exception
Program                                 SAPLSTD4
Include                                 LSTD4U03
Row                                     51
Module type                             (FUNCTION)
Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
Source Code Extract
Line
SourceCde
21
DATA: BEGIN OF TD110.
22
INCLUDE STRUCTURE TD110_STRU.
23
DATA: END OF TD110.
24
25
CURR_TIME = SY-UZEIT.
26
CURR_DATE = SY-DATUM.
27
28
CALL FUNCTION 'GET_DB_ORA_RELEASE'
29
IMPORTING
30
ORACLE_RELEASE = ORA_REL.
31
32
IF FLAG_REFRESH = 'y'. FLAG_REFRESH = 'Y'. ENDIF.
33
flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
34
35
CLEAR TS_CHECK. REFRESH TS_CHECK.
36
CLEAR CRITOBJ. REFRESH CRITOBJ.
37
CLEAR NR_CRIT_OBJ.
38
39
IF FLAG_REFRESH <> 'Y'.
40
41
Suche zunächst im Arbeitsspeicher !
42
CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
43
IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
44
TS_CHECK[] = TS_CHECK_CACHE[].
45
CRITOBJ[] = CRITOBJ_CACHE[].
46
OK_1 = 'Y'.
47
48
Suche danach in 'MONI' !
49
ELSE.
50
PERFORM PREPARE_MONIKEY USING 2.
>>>>>
IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
52
53
IF SY-SUBRC = 0.
54
OK_1 = 'Y'.
55
TS_CHECK_CACHE[] = TS_CHECK[].
56
CRITOBJ_CACHE[] = CRITOBJ[].
57
ENDIF.
58
ENDIF.
59
60
'Same procedure' für datetime:
61
IF NOT ( TD110_CACHE IS INITIAL ).
62
DATETIME-MONI_DATE = TD110_CACHE-DATUM.
63
DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
64
ELSE.
65
PERFORM PREPARE_MONIKEY USING 3.
66
IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
67
IF SY-SUBRC = 0.
68
DATETIME-MONI_DATE = TD110-DATUM.
69
DATETIME-MONI_TIME = TD110-UZEIT.
70
TD110_CACHE = TD110.
Only related SDN post is following, but solved by changing permissions for saposcol.
Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
Thanks in advance for any assistance.
KR
Gidion

Received the solution from SAP Active Global Support:
This error occurs due a corruption in the table MONI.
For solving this issue you need to clean the records of this table via the following path :
1. Call transaction ST03
2. With GOTO -> Performance database -> Content of database
3. Push button Delete data group
4. Enter ID DB
5. Continue
6. Confirm the delete
If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
Regards,
Gidion

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Error when attempting to IMPORT object TLINE

Hi Experts,
I am trying to read a standard text in my webdynpro abap application using FM READ_TEXT but I keep getting this error Error when attempting to IMPORT object "TLINE". It was working fine before we recently migrated to a unicode enviornment.
This is where its crashing
FORM read_textlines
if rt_header-tdtexttype is initial. "SAPscript format
import tline to rt_lines
from database stxl(tx)
Thanks in advance.

Found my answer. I had a data type conflict when using FM read_text.

ProcessdpCommandEx error when adding or removing object from WebI report (based on BEX query) query panel object list

Similar Messages

Maybe you are looking for