Processing records from co1p

Hi
We have configured automatic production order confirmation and goods movement through XI. In the process, goods movement failed for one of the orders since the material number was incorrect. The confirmation is ok as seen from co14.
When I attempt to process the same from co1p, I get the error 'material number ** does not exist'. i intend to cancel this confirmation/goods movement so that it can be processed afresh.
How can I achieve this?
Regards

Hi Rajesh
I would ideally want to cancel the confirmation from co13 so that both the confirmation and the associated goods movement is reverted.
Currently when I attempt to do this, I get the message 'Future change records for background processing exist for order ......'
This, I believe means that records are held in co1p.
So the next alternative is that I wish to clear the record from co1p.
Hope I am clear.
Regards

Similar Messages

Process records in a transaction table in real time

We are currently designing a new system which basically needs to process records from a transaction table. We are envisaging to have approximately 100000 records per hour. There is no need to process each transaction independently as the external process will process all records residing in the table which have not been processed as yet.
We are basically looking at various options:
1) have the external process run continuously, select all records in the table, process them and delete them and then start the process again
2) have the external process run continuously, select all records in the table, process them, update a status flag and then start the process again processing only those records with their status not yet updated
3) fire a trigger for each record launching the external process (if it is not running yet)
4) have a separate table containing a timestamp which is updated via trigger for every transaction that is inserted in the transaction table. Have the external process run continuously and only process those records which have exceeded the previous timestamp.
Would appreciate any ideas you may have how to tune this process and your views regarding the options mentioned above(or others you might have)
Thanks a lot.

user9511474 wrote:
We are currently designing a new system which basically needs to process records from a transaction table. We are envisaging to have approximately 100000 records per hour. There is no need to process each transaction independently as the external process will process all records residing in the table which have not been processed as yet.My busiest table collects up to 50 million rows per hour (peak periods in the day) that also needs to be processed immediately (as a batch) after the hour. I use partitioning. It is a very flexible and there are very few (if any) performance knocks.
The entire data set has to be processed. With a partition that means a full scan of the table partition - and the ability to do it using parallel query. No additional predicates are needed, except the to have the CBO apply partition pruning. In other words, the predicate enables the CBO to narrow down the SQL to the previous hour's partition only.
No additional predicates needed like a STATUS flag to differentiate between processed and unprocessed rows - as the entire data set in the partition is unprocessed at that time. (such a flag approach will not be very scalable in any case)
Also, I do not use external processes. Too expensive performance wise to ship data all the way from the Oracle buffer cache to some external process. And parallel query is also not an option with an external process as the OCI does not provide the external process with a threading interface in order to hook into each of the data output streams provided by the parallel query clients.
I stay inside PL/SQL to perform the data processing. PL/SQL is even more capable than ProC/C++ and Java and .Net in this regard.
The execution interface to drive the scheduling of processing is DBMS_JOB. Straight forward and simple to use.
The basic principles of processing large data volumes in Oracle is to effectively use I/O. Why use indexes when an entire data set needs to be processed? Why perform updates (e.g. updating a status flag) when the data model and physical implementation of that can eliminate it?
I/O is the most expensive operation. And when dealing with a large volume, you need to make sure that every single I/O is actually required to achieve the end result. There's no room to waste I/O as the performance penalties are hefty.

Tracking only Error records from Batch file in BPEL process

Hi,
I am reading file of 1000 records from file adaptor and debatching into two instance of each 500 records. And using invoke insert operation writing into database.
The first batch of 500 records processed successfully and written into database custom table.
The second set of 500 records created warning instance with some error message and nothing is written to database from second set.
The error is due to some wrong data in one row of second set of 500 records. Due to that single row error, the remaining 499 got rejected and nothing from second set is inserted into database.
Do we have control on that only one record of second set(500records) and BPEL process should write remaining 499 records to database.
Please help me on this issue. It would be great help. Thanks inadvance.
Waiting for your replies.
Thank you.
Edited by: PraveenT2 on May 13, 2009 4:27 AM

Hi james,
Below is the schema file using for reading file
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/readService"
xmlns:tns="http://TargetNamespace.com/readService"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD"
*nxsd:uniqueMessageSeparator="${eol}">*
<xsd:element name="Root-Element">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="root" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="C3" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="C4" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
*and in bpel .xml file edited property for rejected file*
activationAgent
className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent"
partnerLink="readService">
<property name="rejectedMessageHandlers">
file://C:/Initiatives/Employee/RejectedRecords
</property>
</activationAgent>
The Issue i am facing is when i provide the datafile with all invalid values then process didn't create instance but made entry of all invalid record into directory path specified in bpel.xml while setting rejectMessageHandler property.
But when i provide mix of valid and invalid records of file, then bpel process created instance with warning status.
the file i was provided is :
10,veer,10000,12
20,james,2000,10
Veer|name|Test
Veer|name|Test
Veer|name|Test
10,file,10000,12
20,error,2000,10
I was expecting 1st,2nd,6th and 7th row should be processes and invalid 3rd,4th and 5th rows should get written into rejectedMessageHandlers folder set at bpel.xml. But instance has created and treated whole invalid rows + 10 as first column for 6th row as pasted below.
<ns0:eno>Veer|name|Test
Veer|name|Test
Veer|name|Test
10
</ns0:eno>
<ns0:ename>file</ns0:ename>
<ns0:sal>10000</ns0:sal>
<ns0:dept>12</ns0:dept>
Nothing has written into rejectedMessageHandlers folder set at bpel.xml.
Can you please help me on this issue. Thank you very much.
Edited by: PraveenT2 on May 13, 2009 10:33 PM
Edited by: PraveenT2 on May 13, 2009 10:34 PM
Edited by: PraveenT2 on May 13, 2009 10:48 PM

Processing some records from internal table.

Hi,
My internal table contains material in lakhs.After fetching the record from database table MARA,i process each material to find out its characteristics.As there are too much records it is taking time, resulting in time out error abap dump. If i want to process first 5000 material then remaining 5000 and so on...what logic should i apply?or can there be any alternative solution?

Hi,
You can also check if the read statement has BInary Serach.
By Adding this it will improve performance.
Read statement will occupy lots of time to read the records.
Sort the Internal table with some key field and the use Binary Search for an internal table.
Ex :
SORT T_PRGEN by ATTR20A.
READ TABLE T_V_TCAV201 INTO WA_V_TCAV201 WITH KEY ATTRV20 = WA_PRGEN-ATTR20A BINARY SEARCH.
This should fix the issue.
Regards,
Kittu

Deleting PSA data using process chain doesn't delete records from psatable

Dear All,
We have an issue where by the process chain runs and deletes the PSA records and upon checking that's what we thought it had done from the monitor but it didn't actually delete the records from the PSA Tables!
Does anyone have any clues about this ?
Thanks
Craig

Chetan,
Yes you read correctly the actual table content for the PSA records are not physically removed.
By monitor I meant the entry in the requests for PSA.
It's a strange one for sure.
Cheers
Craig

Multiple records from IDOC should be processed one by one Thru Web service

Hi Experts,
I have a requirement where in the idoc (custom one) will collect data from R/3 system at the frequency of One hour and send them to XI and from XI i need to call the Web serice which would post only one record at a time. In this case how should i manage by mapping. Its something like records from a Table needs to be posted sequentially thry Web service at the receiving end..
Thanks for your replies in advance.
Regards,
Rajesh

Hi,
Please see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm - collecting IDocs without BPM
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change - IDOC bundling
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
Idoc - Multiple - interfaces - Idoc to multiple interfaces in XI
Multiple mappings into one Im - Multiple message mappings in one integration scenario
Multiple Idocs
How to send Multiple Idocs?
Regards
Chilla..

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

How to delete record from table control in BDC?

Hello friends,
I am running a BDC program to delete records.
I have file with following records and i got these records into t_itab.
Material     Plant     Start date     End date     Cost
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100004     S002     09/01/2008     09/31/2008     56.00
MQ100008     S003     09/01/2008     09/31/2008     57.00
Now, I have BDC transaction in which table control screen which contains following structure.
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100002     S002     09/01/2008     09/31/2008     56.00
MQ100004     S003     09/01/2008     09/31/2008     47.00
MQ100005     S004     09/01/2008     09/31/2008     25.00
MQ100006     S012     09/01/2008     09/31/2008     76.00
MQ100007     S033     09/01/2008     09/31/2008     17.00
MQ100008     S011     09/01/2008     09/31/2008     95.00
MQ100009     S002     09/01/2008     09/31/2008     46.00
I have recorded from SHDB in which first record will be delete.
So, when i loop through t_itab,instead of deleting MQ100001,MQ100004 and MQ100008 from BDC screen,
it is deleting MQ100001,MQ100002 and MQ100004 (first record for each process ).
Which i don't want to.
Is there any facility in BDC to put records on top which i want to delete?
Please guide me.
Regards,
RH

Hi,
While doing recording check for Filter button available for the table control, if it available then do the recording for the same.
Once it is done while passing the data from internal table put the value into Filter field.
Hope it resolves your issue.
Thanks & Regards.
Nagaraj Kalbavi

How to delete record from table control using BDC?

Hello friends,
I am running a BDC program to delete records.
I have file with following records and i got these records into t_itab.
Material     Plant     Start date     End date     Cost
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100004     S002     09/01/2008     09/31/2008     56.00
MQ100008     S003     09/01/2008     09/31/2008     57.00
Now, I have BDC transaction in which table control screen which contains following structure.
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100002     S002     09/01/2008     09/31/2008     56.00
MQ100004     S003     09/01/2008     09/31/2008     47.00
MQ100005     S004     09/01/2008     09/31/2008     25.00
MQ100006     S012     09/01/2008     09/31/2008     76.00
MQ100007     S033     09/01/2008     09/31/2008     17.00
MQ100008     S011     09/01/2008     09/31/2008     95.00
MQ100009     S002     09/01/2008     09/31/2008     46.00
I have recorded from SHDB in which first record will be delete.
So, when i loop through t_itab,instead of deleting MQ100001,MQ100004 and MQ100008 from BDC screen,
it is deleting MQ100001,MQ100002 and MQ100004 (first record for each process ).
Which i don't want to.
Is there any facility in BDC to put records on top which i want to delete?
Please guide me.
Regards,
RH

One option is to identify the table and find out the location as the number of row which should be deleted from the table and then in the bdc program instead of postioning the cursor on the row 1(using the statement perform bdc_cursor ....(01)), replace the 01 with the row number.
Second option is that if a filter control is available for the table control, then filter the data each and every time with the material number to be deleted and then delete the first row.
Regards
Farzan

HOW to delete the records in CO1P?

Hi all:
When i close the PO,i find the PO have CO1P records.However ,the PO has been settled. Then how can i delete the records in CO1P for this PO.

Dear,
CO1P:
Normally the Goods Movement errors are updated in Table AFFW - Goods Movements with Errors from Confirmations and in transaction COGI.
If the table is locked during background using update control for the confirmation then the errors are recorded in CO1P.
COFC:
Used for Reprocessing of errors in confirmation related to actual cost calculations.
Please run CORUPROC Program.
Please check this link also for further help
http://help.sap.com/saphelp_46c/helpdata/en/e3/7cd32396f611d1b5a60000e8359890/frameset.htm
Regards,
R.Brahmankar

Error during activation of DSO - Activation of M records from DataStore obj

Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,

HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay

How to fetch records from the database into a combo box?

Hi:
I´m really new with ABLBPM and I´m trying to fetch records from the database to display them into a combo box as valid values for a presentation but I´m using a dynamic method with this code:
for each row in SELECT campo1, campo2 from TABLE
do
solicitudes[] = [row.campo1, row.campo2]
end
return solicitudes
And the debugger says that SQL instructions can be used only in fuctions and procedures that are executed on the server.
Do you know another way to do it?
P.D. Sorry for my terrible english
Greetings

Hi Steve,
Thank you, your idea is perfect, but when I try to run the screenflow where the combo should be filled I get this error:
fuego.lang.ComponentExecutionException: No se ha podido ejecutar correctamente la tarea.
Motivo: 'java.lang.NullPointerException'.
 at fuego.web.execution.InteractiveExecution.setExecutionError(InteractiveExecution.java:307)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:166)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.webdebugger.servlet.DebuggerServlet.redirect(DebuggerServlet.java:136)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:85)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
 at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
 at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
 at fuego.web.execution.servlet.ServletExternalContext.processAction(ServletExternalContext.java:110)
 at fuego.webdebugger.servlet.DebuggerExecution.dispatchComponentExecution(DebuggerExecution.java:64)
 at fuego.web.execution.InteractiveExecution.invokePrepare(InteractiveExecution.java:351)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:192)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
 at fuego.webdebugger.servlet.DebuggerServlet.doDebug(DebuggerServlet.java:148)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:82)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
Any ideas??
Thanks and greetings

Read record from parent table

Hello,
I have a table which is linked (using FK) with a number of other tables which are linked with other tables, etc. (like a tree). Using ADO.NET EF provider within ODAC 11.2.0.3 Release 5 I am trying to get a record from the root table. I coded a test using MSTest and when I do "myContext.MyTable.Where(...).FirstOrDefault();" VS2010 stops the debugging process after a while - no exception is caught in code but I get an error in Test results window: "The test adapter 'UnitTestAdapter' threw an exception while running test '<my test>'. Exception has been thrown by the target of an invocation.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
In the Debug window/view I get this:
A first chance exception of type 'System.AccessViolationException' occurred in Oracle.DataAccess.dll
A first chance exception of type 'System.Reflection.TargetInvocationException' occurred in mscorlib.dll
A first chance exception of type 'System.Reflection.TargetInvocationException' occurred in Microsoft.VisualStudio.QualityTools.Tips.UnitTest.Adapter.dll
Step into: Stepping over method without symbols 'Microsoft.VisualStudio.TestTools.Agent.AgentExecution.CallAdapterRunMethod'
W, 7380, 13, 2012/11/09, 23:33:29.803, QTAgent32.exe, AgentExecution: Exception while calling TestAdapter.Run: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at Oracle.DataAccess.Client.OpsDac.Read(IntPtr opsConCtx, IntPtr opsErrCtx, IntPtr opsSqlCtx, IntPtr& opsDacCtx, OpoSqlValCtx* pOpoSqlValCtx, OpoMetValCtx* pOpoMetValCtx, OpoDacValCtx* pOpoDacValCtx)
at Oracle.DataAccess.Client.OracleDataReader.Read()
at System.Data.Common.Internal.Materialization.Shaper`1.StoreRead()
at System.Data.Common.Internal.Materialization.Shaper`1.SimpleEnumerator.MoveNext()
at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source)
at System.Data.Objects.ELinq.ObjectQueryProvider.<GetElementFunction>b__1[TResult](IEnumerable`1 sequence)
at System.Data.Objects.ELinq.ObjectQueryProvider.ExecuteSingle[TResult](IEnumerable`1 query, Expression queryRoot)
at System.Data.Objects.ELinq.ObjectQueryProvider.System.Linq.IQueryProvider.Execute[S](Expression expression)
at System.Linq.Queryable.FirstOrDefault[TSource](IQueryable`1 source)
at <my code stack>
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.DefaultTestMethodInvoke(Object[] args)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.DefaultTestMethodDecorator.Invoke(Object[] args)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunTestMethod()
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ExecuteTest()
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.Execute(UnitTestResult result)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.ExecuteSingleTest(UnitTestExecuter executer, UnitTestElement test, ITestContext testContext, UnitTestAdapterContext userContext, Boolean isLoadTest)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(UnitTestElement test, ITestContext testContext, Boolean isLoadTest, Boolean useMultipleCpus)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(UnitTestElement test, ITestContext testContext, Boolean isLoadTest, Boolean useMultipleCpus)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapter.Run(ITestElement testElement, ITestContext testContext, Boolean isLoadTest)
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapter.Run(ITestElement testElement, ITestContext testContext)
at Microsoft.VisualStudio.TestTools.Agent.AgentExecution.CallAdapterRunMethod(Object obj)
The thread 'Agent: adapter run thread for test '<my test>' with id '0779674e-2258-44d4-adfe-65302abbe50f'' (0x13e0) has exited with code 0 (0x0).
W, 7380, 30, 2012/11/09, 23:33:29.869, QTAgent32.exe, Performance warning: m_test should be null when TestResult is serialized. Please find the offending code and correct it.
E, 7380, 30, 2012/11/09, 23:33:29.879, QTAgent32.exe, AgentExecution: Received adapter message during test shutdown: run id {94200779-4759-4b4a-819c-61c55d39acbc}, test '<my test>' with id 0779674e-2258-44d4-adfe-65302abbe50f: MessageKind: Result, Outcome: Error
The thread 'ExecutionUtilities.InvokeWithTimeout helper thread 'Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapter.AbortTestRun'' (0x1f98) has exited with code 0 (0x0).
The thread 'Agent: state execution thread for test '<my test>' with id '0779674e-2258-44d4-adfe-65302abbe50f'' (0x2688) has exited with code 0 (0x0).
The thread 'Agent: test queue thread' (0x1c58) has exited with code 0 (0x0).
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in Oracle.DataAccess.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
The thread '<No Name>' (0x24c0) has exited with code 0 (0x0).
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in System.Data.Entity.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
The thread '<No Name>' (0x2410) has exited with code 0 (0x0).
The thread '<No Name>' (0x2520) has exited with code 0 (0x0).
E, 7380, 6, 2012/11/09, 23:35:17.912, QTAgent32.exe, AgentObject: Cleanup: Timeout reached in cleaning up the agent.
E, 7380, 6, 2012/11/09, 23:35:22.918, QTAgent32.exe, AgentObject: Cleanup: Timeout reached in cleaning up the agent.
The program '[7380] QTAgent32.exe: Managed (v4.0.30319)' has exited with code 0 (0x0).
Any idea is appreciated!
Thanks
Edited by: 917334 on Nov 10, 2012 12:17 AM
The equivalent where statement works well in classic ADO.NET.

Hello
Use the below function module
RV_ORDER_FLOW_INFORMATION pass the type as C and pass the number.You will get all the flow.
SELECT VBELN KNUMV BUKRS KUNRG REGIO NETWR FKSTO FKDAT FKART INTO CORRESPONDING FIELDS OF TABLE T_VBRK FROM VBRK WHERE BUKRS IN P_BUKRS AND FKDAT IN P_FKDAT AND VKORG IN P_VKORG AND REGIO = '07'
 ORDER BY VBELN KNUMV.
SORT T_VBRK BY vbeln.
LOOP AT T_VBRK.
 IF T_VBRK-FKART = 'F2' OR T_VBRK-FKART = 'YF2' OR T_VBRK-FKART = 'ZF2' OR
 T_VBRK-FKART = 'ZG2' OR T_VBRK-FKART = 'ZL2' OR T_VBRK-FKART = 'YG2' OR T_VBRK-FKART = 'YL2' .
 IF T_VBRK-FKSTO IS INITIAL.
i_vbco6-vbeln = t_vbrk-vbeln.
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
EXPORTING
AUFBEREITUNG = '2'
BELEGTYP = ' '
 COMWA = i_vbco6
NACHFOLGER = 'X'
N_STUFEN = '50'
VORGAENGER = 'X'
V_STUFEN = '50'
IMPORTING
BELEGTYP_BACK =
TABLES
 VBFA_TAB = t_vbfa
EXCEPTIONS
 NO_VBFA = 1
 NO_VBUK_FOUND = 2
 OTHERS = 3
endif.
ENDIF.
endloop.
loop at t_vbfa.
if t_vbfa-vbtyp_V = 'C' OR t_vbfa-vbtyp_V = 'K' OR t_vbfa-vbtyp_V = 'L' OR t_vbfa-vbtyp_V = 'E' .
*clear t_vbfa.
SELECT VBELN BSTNK BSTDK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE T_VBAK FOR ALL ENTRIES IN T_VBFA WHERE VBELN = T_VBFA-VBELV .
endif.
ENDLOOP.
In case of any more help is required do let me know
Regards,
Nabheet Madan

How to delete a particula record from InfoObject

Dear All,
I got some problem situations and would like some suggestions from any of you.
Problem detail- one process chain was failed due to could not activate an ODS-A
- ODS-A and ODS-B contained InfoObject-0BP_GUID
- errors were found and referred to the InfoObject-0BP_GUID.
- The errors referred to one record composed of incorrect data. I still wondered where it came from since normally, 0BP_GUID keeps only guid.
I'd like to delete the incorrect record.But I do not want any impact to InfoProviders.
I'm not sure how to resolve this case. This has to be very carefully managed because it happened on production system.
Actually, I did find one thread in this forum "Delete SID table content". But I'm not sure whether it could be applied to my case.
Any suggestion would be appreciated.
Thank you very much.
-WJ-

Unfortunately you cant delete data without inpacting the data in the. This is how BW works and you will appreciate this because youur transaction data is secured and you wont face any data issues later on. Let me give you an example. Lets sa your ODS or cube stored sales data and in the ODS you have sales org, customer and amount. When you run the report, data is read from this cube /ods, but to fetch the master data it goes to the master data tables via SID. When the transaction data gets loaded and when you try to delete a record in master data, it will let you do.
If you still wish to do, proceed as follows:
1. Delete the data in cube first.
2. Delete the particular record from the master data table.3
3. Reload the data to the ODS / cube.
Without deleting the transaction data in the ODS / Cube the system wont let you delete the data in master data and you will get any of the following messages.
(a) " not all master data could be deleted
(b) "the master data can not be deleted".
Ravi Thothadri

Recording from Creative Media Aborts

Hi all,
I have been experiencing some probelms trying to record onto my computer via the creative media console. I have sound, and the computer registers the sound, but after a certain amount of time, the program simply stops recording and prompts a message "the recording process was aborted".
I run win XP with a sound blaster audigy 2 sound card. The drive I am recording onto has over 39 gigs of space and I am recording from a pioneer djm 500 mixer plugged in via rca cables to the aux line 2.
I am trying to record dj mix sessions and needless to say it is quite aggrevating to realize that nothing is recorded. The maz time I have tried is around 80 min (that of a cd).
Here is the record settings I have been using:
Channel: Auxiliry 2
WAV, STEREO, 96,000 Khz, 16bit sample rate.
Any thoughts?
Thanks in advance - Michael

Personally I've never heard of one. I know that Notmad can backup playlists onto the PC, but I'm not sure what format they're in. I'm thinking it isn't M3U though.

Processing records from co1p

Similar Messages

Maybe you are looking for