Processing sync http response code XI

We are receiving a synchronous HTTP response code from the 3rd party using HTTP adapter. The requirement is based on the response code (either 200 or 4xx or 5xx), email or some action needs to be generated, so that the user knows what happened to the Outbound message processing.
I am not very sure how to trap and process further this HTTP response code. Please note that this is a syn scenario and has been achieved without using BPM.
Any suggestion is highly appreciated.
Thank you.
Anuradha.

Hello Stephan.
I have the impression, that the mentioned response code is not the HTTP code, but part of the HTTP message payload. Is this correct?
-->> The response code is part of the synch response message that we are getting from the 3rd party
When you send a message with HTTP adapter to external system, any other HTTP code than 2xx will make the XI message fail.
If I am not correct, could you provide the HTTP stream of the response message here? This will help to understand the issue.
This is the attached payload: (response sync message)
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE cXML (View Source for full doctype...)>
- <cXML timestamp="2011-06-2916:08:49-0400" payloadID="50000011930000000220110629200753" version="1.2.011">
- <Response>
<Status code="200" text="OK" />
</Response>
</cXML>
Thanks.
Anuradha.

Similar Messages

Received HTTP response code 500 : Internal Server Error using connection Fi

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
Ramya

Hi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya

Received HTTP response code 404 : Not Found

I am attempting to pass a file through XI into an IDoc to ECC. I have tested the mapping, and that works fine. I have also tested the configuration in the integration builder and it seems to be fine. However, when the file is picked up by XI from the directory, processed by XI, and then sent to ECC, an error occurs in the runtime workbench:
Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
The error leads me to believe that the system cannot be found, or there is a privelage issue with the service user attempting to log onto ECC. However I believe I have set up the RFC connection correctly, and the service user should be fine.
Does anyone know what may be causing this? I am using the IDoc adapter for the reciever communication channel. I have set the RFC destination (and tested it in SM59, works fine) and the port (I assume this is the port in WE21?). Not sure where to look...

Being that the error says:
Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
I am trying to understand what this means. Can anyone explain to me why the message is getting sent to this address? I assume that the AFW is coming into play because I am using the IDoc adapter, hence the adapter framework. Is this true? Should the AFW be showing up, or do you think there is another issue?
Mainly I want to know if this is more of a basis issue, or a configuration problem with the interface in XI?

HTTP Response code 404 - RFC Adapter des not connect to Integration engine

Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
     at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
     at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
     at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
Arul

HI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh

File- XI- RFC (Error: Received HTTP response code 500..)

Hi,
I am working on File->XI->RFC scenario, getting Processed Successfully status in "SXI_MONITOR".
But Data is not posted in SAP R/3. I check <b>Runtime Workbench </b> Getting following Error in one step.
Can any one help me in analyzing the error.....??????
2006-06-09 14:36:32 Success output 1149888992513 Channel WEBMETHOD_SENDER_SOAPFMTEST: Send binary file "/usr/sap/transx42/data/xi_input.xml". Size 175 with QoS EO
2006-06-09 14:36:38 Success output 1149888998592 Application attempting to send an XI message asynchronously using connection AFW.
2006-06-09 14:36:39 Success output 1149888999757 Trying to put the message into the send queue.
2006-06-09 14:36:40 Success output 1149889000823 Message successfully put into the queue.
2006-06-09 14:36:40 Success output 1149889000824 The application sent the message asynchronously using connection AFW. Returning to application.
2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001577 The message was successfully retrieved from the send queue.
2006-06-09 14:36:41 Success output 1149889001591 File "/usr/sap/transx42/data/xi_input.xml" deleted after processing
2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001745 The message status set to DLNG.
<b>2006-06-09 14:37:47 Error SAPEngine_System_Thread[impl:5]_12 1149889067522 Transmitting the message to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..</b>
2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067585 The asynchronous message was successfully scheduled to be delivered at Fri Jun 09 14:42:47 PDT 2006.
2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067695 The message status set to WAIT.
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 Retrying to send message. Retry: 1
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 The message was successfully retrieved from the send queue.
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367643 The message status set to DLNG.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368435 The message was successfully transmitted to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368471 The message status set to DLVD.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368472 The message was successfully delivered.
Thanks & Regards

Hi Umesh,
I think, the reason is because of huge number messages ..
Also just go to RFC adapter, activate the adapter,refresh the cache and try it..
following guide will help you to solve problem~
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Just refresh the cache-The following guide will help you on that~
https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Refer these SAP notes- 807000,803145
(some hints)
Regards,
Moorthy

Received HTTP response code 500 : Timeout

Hi All,
I have done the File to JDBC to File(Sync) with module concept. Every thing is working fine in Dev system, yes'day it was moved to Quality System while i am trying to test i am getting the error in Sender File communication chennal.
Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
I have chaged the SQL statment to fetch only 50 records at that time its working fine with out any error.
While i am trying to collect 40,000 records its failing generally in Dev it use to take 4 to 6 min to gereate file.
Pls let me know do i need to chage any paramaters in Visual admin.
I have observed cm/keep_alive_timeout =60 (sec) but in dev the time is more? is this causing the problem?
I DEV system i don't have any issues the scenario is working fine.
Thanks,
Venkat.

Hi,
Yes..you should increase the icm/keep_alive_timeout.If you increase the time then until the connection will wait for the response. For more details..
[http://help.sap.com/saphelp_nw70/helpdata/EN/0b/1c7e7abbc311d5993a00508b6b8b11/content.htm]
Regards,
Prakasu.M
Edited by: prakasu on May 13, 2009 6:31 PM

Received HTTP response code 500 with acknowledgment

Hello,
This is my process : R/3 (Idoc) -> XI -> 3rdParty(CSV).
I use R/3 4.6C and XI 3.0 SP10
This work fine but there is a problem with the acknowledgment :
Transmitting the message to endpoint http://<server>:8000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 500..
I use this Weblog : /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
and all I can find in this forum.
What can I do ?
Thanks
Regards
Message was edited by: Christophe DUMONT

HTTP 500 is an error caused at the Web Server side. Any http connection happens in 4 steps:
1) Obtain the IP address from the URL - provied by DNS
2) Open Ip Socket for that IP
3) Use this socket to write data
4) Receive data stream back from the server.
This data stream which is passed by the server has status codes. If there is a status code 500, this is trapped only at the last level and client is not able to resolve the status.
You would want to look at the 4 points of faliure mentioned above. And it would help if u get someone on the Web Server side to look at the server logs. These logs are more descriptive and will provide a clue to set things right.
let us know if u are able to resolve the issue.

HTTP response code: 500 (Internal Server Error) when updating CMS

Hi all,
I'm using NWDI to develop a component.
After I have created Product and SC in SLD, I'm going to add SC into my Track. However the component doesn't appear in the list, even I have updated CMS.
Then I checked the CMS log file, it says
#1.5#00110915CACE0071000000190000185400042CDBD4231025#1175222575219#/Applications/CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.conf.manager.CmsConfManager#liuxiao#126#SAP J2EE Engine JTA Transaction : [1ffffffdf252200315]#shaw2k07_J2E_31401250#liuxiao#27a26201de6811db9d8c00110915cace#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.cms.pcs.conf.manager.CmsConfManager#Plain###Update CMS failed#
#1.5#00110915CACE00710000001C0000185400042CDBD4256832#1175222575375#/Applications/CMS#sap.com/tcwddispwda#com.sap.cms.ui.landconf.LandConfController#liuxiao#126##shaw2k07_J2E_31401250#liuxiao#27a26201de6811db9d8c00110915cace#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.cms.ui.landconf.LandConfController#Plain###CMSConfigurationException SLD (URL http://shaw2k07:50300) server exception: HTTP response code: 500 (Internal Server Error)#
How can I handle with this problem?
Thanks in advance.

Hi Pascal,
I have checked the SLD server log. When updating CMS failed, this log shows
#18 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
#17 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More...
#16 03/31/2007 22:17:21.226 [SAPEngine_Application_Thread[impl:3]_38] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
#15 03/31/2007 22:17:21.210 [SAPEngine_Application_Thread[impl:3]_38] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More...
and More says
#17 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors.
Thrown:
javax.jms.JMSSecurityException: You do not have permissions: action consumer and instance SLDClusterNotificationTopic.
at com.sap.jms.protocol.notification.ServerExceptionResponse.getException(ServerExceptionResponse.java:231)
at com.sap.jms.client.session.Session.checkReceivedPacket(Session.java:2613)
at com.sap.jms.client.session.Session.createConsumer(Session.java:2172)
at com.sap.jms.client.session.TopicSession.createSubscriber(TopicSession.java:39)
at com.sap.lcr.cimsrv.ClusterNotificationListener.<init>(ClusterNotificationListener.java:141)
at com.sap.lcr.cimsrv.ClusterNotificationListener.start(ClusterNotificationListener.java:68)
at com.sap.lcr.cimsrv.CIMOMServlet.init(CIMOMServlet.java:106)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:339)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
As for the
javax.jms.JMSSecurityException: You do not have permissions: action consumer and instance SLDClusterNotificationTopic.
I found information in this thread
SLD Connection failed
I'm quite sure that the user loggin into the SLD has the required role referred by "service.jms.default.authorization" "Security Role" "administrator". But it still doesn't work.
Btw when I restart the whole system the SLD server log also shows
FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
I just have no idea really...

HTTP response code 500 : Error during parsing of SOAP header

Hi Experts,
I have a MAIL to IDOC scenario. An external third party emails invoices to our inbox - which we pick up and process the attachment. All is well when I test the scenario internally, but when the third party emails it fails with (see ERROR MESSAGE below).
When I look at the SOAP header of the failed message I see the values from the dump in this field:
<sap:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderTHREAD-INDEX">AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=</sap:Record>
Can anyone tell me what SHeaderTHREAD-INDEX does? Or what my problem is (Our email is Outlook)
ERROR MESSAGE.........
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14), AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=協彎䅍䔾ਉ़䥎噏䥃䕟乏㸸㌱ㄵㄹ㰯䥎噏䥃䕟乏㸊उ㱁䵏啎呟䕘䍌彖䅔㸷⸵〼⽁䵏啎呟䕘䍌彖䅔㸊उ㱃啒剅乃失㹅啒㰯䍕剒䕎䍙ㄾਉ़䅍何乔彖䅔㸱⸴㜼⽁ꯃ䅢坡汫, ST: ST_XM; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: ; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14) (or one of the attributes) has the incorrect value AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQ An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1p
Transmitting the message to endpoint http://sdcxp1-ci.na.fmo.com:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header.

We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation.

HTTP response code: 405 Method Not Allowed

I get the following error message when trying to log into the DTR. However from another machine the same URL seems to work.
When tring to import the configuration from remote the following stack trace shows up:
[code]
com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 405 Method Not Allowed
     at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:516)
     at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:407)
     at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
     at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
     at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
     at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:436)
     at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:740)
     at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:983)
     at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:211)
     at com.sap.lcr.api.sapmodel.SAP_DesignTimeConfigurationAccessor.enumerateInstances(SAP_DesignTimeConfigurationAccessor.java:168)
     at com.sap.ide.eclipse.component.devconf.DevConfManager$3.run(DevConfManager.java:593)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.sap.ide.eclipse.component.devconf.DevConfManager.listRemoteDevConfNames(DevConfManager.java:587)
     at com.sap.ide.eclipse.component.wizard.LoadDevConfPage.fillTable(LoadDevConfPage.java:225)
     at com.sap.ide.eclipse.component.wizard.LoadDevConfPage$5.widgetSelected(LoadDevConfPage.java:281)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.ide.eclipse.component.provider.actions.DevConfNewAction.run(DevConfNewAction.java:46)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
[/code]
Pl help, thanks,
Manik.
Message was edited by: Manik Narayan Saha

Hi Manik
What have you set in
Windows ->Preferences ->Java Development Infrastructure ->Development configuration
the url should be just http://<server>:<port>
Regards
Pran

Received HTTP response code 401 : Unauthorized

Hi Experts!
I know there are lots of posts regarding Received HTTP response code 401 : Unauthorized, and I read a lot of them.
Unfortunately I got not the solution to my problem.
I have following scenario: async; oneway; xml via DataPower (SOAP) to SAP PI to Service Consumer
When sending a message it is led over the DataPower to the PI, but it is not processed through.
It enters the MP and it is successfully put into the queue. You can see the details below.
15.02.2012 15:12:34.611     Information     MP: entering1
15.02.2012 15:12:34.614     Information     MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
15.02.2012 15:12:34.616     Information     SOAP: request message entering the adapter with user PI**
15.02.2012 15:12:34.620     Information     SOAP: request message leaving the adapter (send)
15.02.2012 15:12:34.620     Information     The application tries to send an XI message asynchronously using connection SOAP_http://sap.com/xi/XI/System.
15.02.2012 15:12:34.624     Information     Trying to put the message into the send queue.
15.02.2012 15:12:34.676     Information     SOAP: call completed
15.02.2012 15:12:34.676     Information     SOAP: completed the processing
15.02.2012 15:12:34.676     Information     Message successfully put into the queue.
15.02.2012 15:12:34.676     Information     The application sent the message asynchronously using connection SOAP_http://sap.com/xi/XI/System. Returning to application.
15.02.2012 15:12:34.678     Information     MP: leaving
15.02.2012 15:12:34.682     Information     The message was successfully retrieved from the send queue.
15.02.2012 15:12:34.700     Information     The message status was set to DLNG.
15.02.2012 15:12:34.922     Error     Transmitting the message to endpoint https://<sid>.XXX:port/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 401 : Unauthorized.
15.02.2012 15:12:34.940     Information     The message status was set to WAIT.
15.02.2012 15:12:34.941     Information     The asynchronous message was successfully scheduled to be delivered at Wed Feb 15 15:17:34 CET 2012.
I can't say, why I get the 401-response.
From PI Message Monitoring: Monitor Messages I get following informations:
Message-ID     MSG-ID
Richtung     OUTBOUND
Message-Headers     content-length=14391
http=POST
content-type=multipart/related; boundary=SAP_MSG-ID_END; type="text/xml"; start="<soap-MSG-ID[at]sap.com>"
Message-Typ     Send
Verbindungsname     SOAP_http://sap.com/xi/XI/System
Credential     SAPPasswordCredential(PIAFUSER):password=********:sapclient=009:saplang=en:sapsysid=<SID>
Fehlerkategorie     XI_J2EE_ADAPTER_XI_HANDLER
Fehlercode     SEND_CONSUMER_ERROR
Statusdetails     Messaging: allgemeiner Fehler
Quality-of-Service     EO
Empfängerkomponente
Referenz-ID
Senderkomponente     SENDER_COMP
Sequenz-ID
Serialisierungskontext
Status     systemError
Einplanungszeit     2012-02-15 13:49:38.579
Start Time     Wed Feb 15 13:34:37 CET 2012
Transport     HTTPS
Gültig bis
Protokoll     XI
Persistenz bis     2012-02-16 13:34:37.373
Endzeitpunkt     Wed Feb 15 13:49:39 CET 2012
Anwendungskomponente
Softwarekomponente
Service-Definition
Wurde bearbeitet     false
Any clues?
Many thanks in advance
Holger

Hi Ravi,
it's the Java stack's port.
Hi Venkata,
1. Check whether service user maintained in the SM59 destination is with Roles of std. user PIAPPLUSER, PIISUSER
         The Problem is, that the message is not processed in the PI. I don't see them at SXMB_MONI.
         Today I see them on the RWB at the message-monitoring, but only because they are set after the 3rd try to send them to NDLV.
         I can see the messages, after they are triggered, in the comm-channel-monitoring by selecting the appropriate channel.
2. Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
         Checked the PIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
3.May be wrong password for user PIISUSER.
         There was a pwd-change in january, but the passwords are all correctly replaced.
Thank you for your help!
Holger

Check standard HTTP response code for 301

Hello, EveryBody, I have an error when i deployment a sao project ,
[11:26:11 AM] Deploying profile...
[11:26:11 AM] Wrote SAR file to C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Deploying sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] Processing sar=/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Adding sar file - C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Preparing to send HTTP request for deployment
[11:26:11 AM] Creating HTTP connection to host:crmserver, port:7001
[11:26:11 AM] Sending internal deployment descriptor
[11:26:11 AM] Sending archive - sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Received HTTP response from the server, response code=301
[11:26:11 AM] Problem in sending HTTP request to the server. Check standard HTTP response code for 301
[11:26:11 AM] Error deploying archive sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] HTTP error code returned [301]
[11:26:11 AM] No error message is returned from the server.
[11:26:11 AM] #### Deployment incomplete. ####
[11:26:11 AM] Error deploying archive file:/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I user soa version 11.1.1, jdevelop 11.1.1, everybody who tell the answer,
thank you very much!

I try http://fujiulnsd3t:8001/soa-infra and get the following information.
===========================================================================
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.2.0 - 11.1.1.2.0_091103.1205.1216 built on Tue Nov 03 13:48:58 PST 2009
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 (10.3.2.0)
There are no composites deployed to the platform

CIM_ERR_FAILED: HTTP response code: 404 Not found

Hello!
We are installing NW7.0 PI with local SLD as HA system with virtual name and after patching it up to SPS17 we started Configuration wizard
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
and on step 33/142 Configure the Integration server for sld we got an error:
CIM_ERR_FAILED: HTTP response code: 404 Not found
and from log:
InvokeService:Configure the integration server for sld
Library: sap.com/tclmctctemplateslevel1_4_tcc
SourcePath ./PIPostInstallProcess/configureIntegrationServer8
Time 2009/05/07 at 10:45:31
WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
Execute Java Service
Library:sap.com/tclmctcutilbasic_ear
Class:com.sap.ctc.util.SLDConfig
Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
Arguments
SID : XRQ
CLIENT : 001
HOST : capitate
PORT : 8032
SLDUSER : PISUPER
SLDPASSWORD : % secure content %
InvokeService- Result: Failed
Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException
Stacktrace
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:414)
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:323)
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
This error would be normal with Central SLD but we have local SLD. Is there any parameters for systems with virtual name which is not configured?
Regards,
Mart

Thanks for answering.
Configuration is done by the Post-Installation Guide - SLD of SAP NetWeaver 7.0 , but there is still same error.
It seems, that point is in CPA Cache full refresh, because in SLD Java system on app.server still shows his patchlevel 9 not 17 .
CPA Cache refresh gives an error:
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://capitate:53200/CPACache/refresh?mode=full'. Li...
CPA cache refresh (mode=full) successfully executed in 703 milliseconds.
^
Regards,
Mart

Deploying simple HTML page to WLS 10.3.6 fails with HTTP response code: 502

- I created a simple HTML page and want to test deployment to WLS 10.3.6 on Linux. I created WAR file and when using JDev 11.1.1.4.0 to deploy to WebLogic Server, it fails to deploy. Full errors/messages are:
[04:40:56 PM] ---- Deployment started. ----
[04:40:56 PM] Target platform is (Weblogic 10.3).
[04:40:59 PM] Retrieving existing application information
[04:40:59 PM] Running dependency analysis...
[04:40:59 PM] Building...
[04:40:59 PM] Deploying profile...
[04:40:59 PM] Wrote Web Application Module to C:\JDeveloper\mywork\Simpe_HTML\Project1\deploy\SimpleHTML.war
[04:41:01 PM] Deploying Application...
[04:41:01 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\NGOLDR~1.LAT\LOCALS~1\Temp\SimpleHTML.war' for the application 'SimpleHTML' could not be loaded to the server 'http://dupe:7031/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 502 for URL: http://dupe:7031/bea_wls_deployment_internal/DeploymentService
[04:41:01 PM] See server logs or server console for more details.
[04:41:01 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\Simpe_HTML\Project1\deploy\SimpleHTML.war' to 't3://dupe:7031'
[04:41:01 PM] #### Deployment incomplete. ####
[04:41:01 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
- The Application Server connection is accessible within JDev. 'dupe' is my server name and it's running RH 5.4
- Any help or suggestions appreciated, although I've already asked Mr. Google without success.
Thanks in advance,
Neville

HTTP response code 502 means temporarily overloaded.
I would say that we have to check the deployment error on the weblogic server logs located at <Domain_Home>\servers\dupe\logs\dupe.log
Check for any errors like OutOfMemory etc OR any deployment failures.
If possible, try accessing the console at http://dupe:7031/console
Check if you are able to successfully deploy your application using the console.
From the error it looks like the "dupe" server might not be healthy. So, the log file would really help here to get clues into the root cause.
Arun

Windows Azure Pack - Server returned HTTP response code: 500 error while accessing the public tenant API

Hi,
We are facing the following error while trying to access the given Windows Azure Pack Public tenant API to query the virtual machines list along with network adaper details -
java.io.IOException: Server returned HTTP response code: 500 for URL: https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10000&$skip=0
The response is proper when we access the following URL -
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines
Only on adding the $expand=VirtualNetworkAdapters, url parameter we are getting the above error.
Where can we check for the error logs on the Azure Pack server ? We checked for the logs using Windows Event Viewer but did not find any for the public tenant API.
What should be the cause for such an error and how can we fix this to get the proper data?
Thanks in advance.

Yes, we tried this, $top=10&$skip=0 works for the following url
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$top=10&$skip=0
It is only when we add $expand=VirtualNetworkAdapters,
the server returns the mentioned error response -
URL for which the server returns the 500 error -
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10&$skip=0
Can
you point to the error logs for Windows Azure Pack and SPF ?

Processing sync http response code XI

Similar Messages

Maybe you are looking for