Processor maxed out when starting RT application in development mode.
When I go to run my RT application on my 8145RT board in development mode, one of my dual-core processors stays maxed out for 2 or 3 minutes. I added a break-point at the very begining of the code to make sure it was not something related to the execution of my code. This only happens if I make a change to the code and have to re-download it.
I am using LabVIEW 2009.
Any ideas?
I know this behaviour and I think (but I'm not sure) its a bug which is allready reported. Right now I'm out of office and cannot access the DB to check the CARs number, but as soon as I'm back I will check and update you here.
Christian
Similar Messages
-
Exception when starting WebToGo-Application
Hi,
when I start a WebToGo-Application on the Mobile Client, I get this Exception:
javax.servlet.ServletException: kta.replikation._Replikation.class not found
"Replikation" is the JSP which should be displayed when starting the application. The file exists in the our Mobile Server's repository. Can anyone tell me, why the application can't find this file?
Kind regards,
SimonHi Santharam,
I believe this is a side effect of two cluster members having different versions of the same class due concurrent development and testing. The best way to separate the clusters is to set each to use a different multicast address for the cluster communication. this can be done easily by using the following command line argument:
<tt>-Dtangosol.coherence.clusteraddress=224.1.1.x</tt>
Where 'x' is a value between 1 and 254.
I would also suggest setting the time-to-live of the multicast messages to zero so that the communication does not go beyond the development machine. This can be done with a similar command line argument:
<tt>-Dtangosol.coherence.ttl=0</tt>
Hope this helps.
Later,
Rob Misek
Tangosol, Inc.
Coherence: Cluster your Work. Work your Cluster. -
After the trial period I bought when starting an application, but does not advance. As I can activate it?
Hi,
Do you get any error while activating Muse, or could you please provide some more details. -
Android Emulator get hangs on starting the application in debug Mode
I have deployed the application on Android Emulator in debug mode but on starting the app it get hangs. I have set the Java Debugging to true in the cvm.properties file and also started Java debugger from JDev before launching the ADF Mobile app on android emulator. Can any body help me to figure out the problem why the emulator gets hang on starting the application in debug Mode.
Hi, after setting the debugging = true, you would also need to start the JDeveloper debugger and configure it for remote debugging. Shay has a blog article that should help.
The emulator is hung while trying to connect to the JDeveloper debugger.
https://blogs.oracle.com/shay/entry/debugging_adf_mobile_apps_on
Thanks,
Joe Huang -
Operation timed out when starting application server
Hello experts, I recently installed the Netweaver ABAP preview edition on my pc. So when I try to start the application server after a while it says that the operation timed out so I cant log on using SAPlogon. Any help on this would be greatly appreciated. Thanks a lot guys!
Hi,
Check if SAP is up and running in the SAP MMC.
If SAP is not running
Please check/paste the dev_w0 file in /usr/sap/NSP/DVEBMGS00/work directory.
Regards,
Siddhesh -
Memory maxed out when running weblogic 4.5
I am the tech support guy for my office, but I am WebLogic illiterate. I have a user who is running WebLogic, but when he runs it, his RAM and virtual memory max out. Are there any settings in WebLogic for memory allocation? Or is there a known problem with memory?
Please see my reply in misc.
Michael Girdley
Product Manager, WebLogic Server
BEA Systems Inc.
Jay A. Fulks <[email protected]> wrote in message
news:89gt0e$91a$[email protected]..
Hi.
I am running WebLogic 4.5.1.5 under Solaris 2.6. I am using JDK 1.2.2
with HotSpot. When we shutdown our server, it essentially crashes with
the following error:
# HotSpot Virtual Machine Error, Unexpected Signal 11
# Error happened during: mark sweep
# Error ID: 4F533F534F4C415249530E4350500BC2 01
After looking into the problem, we found that it is easily recreatable,
simply
by (1) starting the server, (2) hitting any web page (which causes
FileServlet
to be loaded), and (3) shutting down the server.
I have attached a tail of my log file as evidence.
Anybody else seen this problem? Is it a Weblogic/HotSpot compatibility
problem?
Thanks. -
WebLogic 10.3.6 Times Out When Starting Web App
When starting our web app on WebLogic 10.3.6 using startWebLogic.sh on OEL (8 cores, 64 GB box), after about 5 to 6 minutes we receive a timeout error from WebLogic saying that it timed out trying to start the web app. The web app has some pre-computed indices to load which will take an estimated 10 to 15 minutes to load. Is there are way to control this timeout?
The time-out you are getting is that related to a transaction?
You can set the transaction time-out in the WebLogic console go to the JTA page for the domain, and change the value in the Timeout Seconds field.
When you are using EJBs, you can also set the time-out on a EJB basis, instead of configuring the time-out for the whole domain.
For example, in weblogic-ejb-jar.xml, you can configure the time-out by using:
<weblogic-ejb-jar ...>
<weblogic-enterprise-bean>
<ejb-name>YOUR_EJB_NAME</ejb-name>
<enable-call-by-reference>True</enable-call-by-reference>
<stateless-session-descriptor>
<pool>
<initial-beans-in-free-pool>25</initial-beans-in-free-pool>
<max-beans-in-free-pool>50</max-beans-in-free-pool>
</pool>
</stateless-session-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>600</trans-timeout-seconds>
</transaction-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>The transactions this EJB spawns can last for 10 minutes. -
Bunch of NPEs when starting ADF application
I always get these NPEs when starting Jdev 10.1.3.2 ADF application in embedded OC4J. Is there a way to rectify this problem?
PrototypeJSFEJB-UserInterface-webapp: Servlet error
java.lang.NullPointerException
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:712)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
or
PrototypeJSFEJB-UserInterface-webapp: Servlet error
java.lang.NullPointerException
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:622)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)It seems this is not critical for application to work but it would be better if there are no NPEs...
-
Script Error when starting Crystal Application
Post Author: jhartney
CA Forum: General
Anybody seen this? Just started when opening any report, been working fine for over a week and now this error. Does not seem to harm anything, the reports still regenerate just fine. Only happens when starting the CR application. CR Developer 11.0.0.1282
Pop-up is as follows
Script ErrorLine 481Position 41 if g3() = True then main = True : Exit Fun
JONPost Author: Gym122
CA Forum: General
3 or more folks here have had the same issue.....more than once. We got the original script error, it quit in the afternoon, and now has reappeared. (fails at a different line in the script though)
Someone posted a fix, though. Just uncheck 'Help', 'Check for updates on startup' Worked for us. Good catch...whoever that was! -
Error "500 Connection timed out" when starting a Web Interface
Hello,
when starting a Web Interface
(either from preview in Web Interface Builder or directly via transaction BPS_WIF0),
after around 2 minutes I get the following Error Message: "500 Connection timed out"
(in Detail, it says "Connection to partner timed out").
If I use a less complex web interface, this error does not come up.
What can I do to avoid this?
Thank you in advance,
StephanHello Stephan,
if a basic web interface is fast enough, this is normally a confirmation, that the problem does not depend on network performance. We do this test always as an initial test to exclude network issues before we analyze BPS.
So it looks like you do have BPS performance issues. What I can tell you is that multiple variable selectors decrease performance. If this is not you problem I would recommend to check how-to-paper "performance".
It could be related to HTTP-services as well, you will find SAP notes about this topics in OSS.
regards
Eckhard Lewin -
Automatically focus JInternalFrame when starting the application...
Hi,
I wonder why my JInternalFrame is not selected (focused) when I start the application - in NetBeans GUI editor I have set the following properties to make my JInternalFrame automatically selected when the app starts:
o enabled
o selected
o visible
Can anyone tell me how to make my JInternalFrame focused?
Thanks
- StephanThanks but unfortunately that didn't solve my problem...
I even tried the following code excerpt...
try {
jInternalFrame1.setSelected(true);
} catch (java.beans.PropertyVetoException e1) {
e1.printStackTrace();
}... but it didn't work - my jInternalFrame1 is not focused on startup. Is this a bug in Java 1.4?
On the other hand I noticed that the example application (InternalFrameDemo) doesn't focus the first internal frame on startup, too - when creating another internal frame from within the application that frame gets focused...
http://java.sun.com/docs/books/tutorialJWS/uiswing/components/ex6/InternalFrameDemo.jnlp
Thanks in advance
- Stephan -
JWS opens a Applet Running Window when starting the application
I have an applet that runs perfectly fine when starting it by double clicking the desktop icon of through the Internet Explorer. My problem is that when I start the applet it opens up another window with status bar displaying "Applet Running". Is there any way to stop displying this window.
It sounds like you are launching you applet from Java Web Start application by BasicService.showDocument("http://www.mycompany.com/myapplet.jnlp");
This would of course launch a browser , which would launch another instance of Java Web Start to run the second applet.
If you have all-permissions you could:
Runtime.exec("javaws http://www.mycompany.com/myapplet.jnlp");
to launch javaws directly.
would be nice if web start allowed this with something like BasicService.launchJNLPClient("http://www.mycompany.com/myapplet.jnlp");
/Dietz -
Powernowd cpu making noise when start some application
When I start some application my cpu is making noise. Is this because of powernowd.
I recently started using powernowd. Below is the default settings.
powernowd: PowerNow Daemon v1.00, (c) 2003-2008 John Clemens
powernowd: Found 2 scalable units: -- 1 'CPU' per scalable unit
powernowd: cpu0: 800Mhz - 2401Mhz (4 steps)
powernowd: cpu1: 800Mhz - 2401Mhz (4 steps)Are you sure your CPU makes the noise. I've never heard that CPU's make any noise. Isn't it rather the fan which makes the noise? That could very well be the case, since powernowd is intended to adjust cpu frequency scaling, i. e. reduce cpu threshold if it is not needed. If you then start an application, the cpu may be forced into a higher threshold, which produces heat, so that the fans have to kick in in order to reduce cpu temperature.
-
NullPointerException when start ISA application in portal
Hello gurus,
I have inserted CRM web application into EP through ISA application iViews. Error message appears (with exception number) when start it. Portal log contains next record that corresponds to the message:
java.lang.NullPointerException
com.sap.pct.crm.channelmgmt.framework.LandscapeProperties.getCookieNameForSession(LandscapeProperties.java: 142).
Any Ideas?
Regards,
KirillHello Kirill,
I would rather use the ISA iView that comes with the CRM business package than using the URL iView. The ISA iView gives a better "deep" integration since it uses "entrypoint.do" in the URL than the standard "init.do".
Please see the
[Note 1021959 - Portal settings for ISA iViews|https://service.sap.com/sap/support/notes/1021959].
If you have not done the configuration of the portal integration yourself, please check the "System Object" that has been defined for this. The "Logon Method" is set to "SAP Logon Ticket". See if this is what you want to change.
BTW, why would you want to use ISA in portal without Single Sign On? Is it for testing purposes?
Cheers,
Easwar Ram
http://www.parxlns.com -
Problems when starting with oracle SQL developer
Hello,
I am very much new with oracle SQL developer. I use oracle 10g and have a database named 'pallabDB' with username: xxxxxx and paswd:yyyyyy. I have installed oracle SQL developer.But i am unable to start up.What i should do? If any body replies it will be a great help.Thanks in advance.But i am unable to
start up.How to understand this sentence without confusion?
Can you explain exactly what is your problem at start up of SQL Developer?
Maybe you are looking for
-
While streaming music from my i-phone 4s, it stops working after 2 miutes and so does music from my i-tunes after about two songs, very frustrating! Have tried allsorts!!!
-
I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play. Does anyone know how I can make this work?
-
My grandmother has an iphone 4. She doesn't know what happened but suddenly it started to read her everything and is making her double-tap her screen. How do I get that setting removed?
-
Why do pdfs print faded?
I can print Word Documents that come out "normal" in terms of their clarity of ink, but when I print pdfs/Excel sheets, they print "faded"? What printer setting would make the ink darker for these documents? (I've tried several different printer opti
-
Internal Server Error when purchasing an app in Blackberry App World
I have a Torch 9810. I have been trying to purchase the Baamboo Premium player. If I do it in the app world on my desktop, I get: Internal Server Error An internal server error has been detected. Please try your operation again. (EC ) If I try from t