Prod Orders merge for oracle requirement

Hi,
Iu2019m a xi consultant. I need to know about Production Order processing.
Iu2019ve to send sales orders (with multiple items) from oracle. And I need to get back the
production orders back to oracle.
Like:
Sales order 1 header
Sales order item1u2026
Sales order item 2u2026
Sales order 2 header
Sales order item1u2026
Sales order item 2u2026
u2026.
As per my understanding, for each sales order item, thereu2019ll be a production order in sap. If this is right, If I use Idoc LOIPRO, Iu2019ll get the individual production orders per every idoc. But I need to send the same way I get the data from Oracle.
Like:
Production order 1 header (with ref. to sales order 1 header)
Production order item1u2026  (with ref. to sales order item 1 header)
Production order item 2u2026 (with ref. to sales order item 2 header)
Production order 2 header (with ref. to sales order 2 header)
Production order item1u2026(with ref. to sales order item 1 header)
Production order item 2u2026(with ref. to sales order item 2 header)
u2026
This is the requirement from customer side.
Is it possible with standard Idoc LOIPRO?
If yes, where I need to consolidate(merge) the individual IDocs to a single production order response to oracle?
Is there any better approach?
thanks
zia

Solved.

Similar Messages

  • Error while saving Prod order - "Class for order classification"

    Hi all
    I am getting the following error while saving the Production Order -
    "Class for order classification has not been generated".
    I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
    Any help would be highly appreciated.
    Thanks in advance.
    Hrishi

    Solved

  • Prod Orders merge in xi

    Hi,
    I need to know about Production Order processing logic in xi.
    Iu2019ve to send sales orders (with multiple items) from oracle to sap. And I need to get back the
    production orders to oracle.
    Like:
    Sales order 1 header
    Sales order item1u2026
    Sales order item 2u2026
    Sales order 2 header
    Sales order item1u2026
    Sales order item 2u2026
    u2026.
    As per my understanding, for each sales order item, thereu2019ll be a production order in sap. If this is right, If I use Idoc LOIPRO, Iu2019ll get the individual production orders per every idoc. But I need to send the same way I get the data from Oracle.
    Like:
    Production order 1 header (with ref. to sales order 1 header)
    Production order item1u2026  (with ref. to sales order item 1 header)
    Production order item 2u2026 (with ref. to sales order item 2 header)
    Production order 2 header (with ref. to sales order 2 header)
    Production order item1u2026(with ref. to sales order item 1 header)
    Production order item 2u2026(with ref. to sales order item 2 header)
    u2026
    This is the requirement from customer side.
    Is it possible with standard Idoc LOIPRO?
    If yes, can I use BPM-Merge concept for this individual IDocs to single jdbc message?
    Is there any better approach?
    thanks
    zia

    HI,
    Instead of making it more complicated with BPM merge, its better to design two seperate interfaces
    For Sales Order
    Oracle to SAP --IDOC
    Then once the IDOC will reached in inbound idoc processing program trigger the event to process the Production order related IDOC. So it will be
    IDOC (SAP ) ---> Oracle scenario.
    This way you could avoid the complexity and will be easy for monitoring the whole process.
    You can use the standard Idoc LOIPRO, but need to add some kind of User Exit to call the event of processing Production Order IDOC
    Thanks
    swarup

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • Internal disk configuration for oracle

    Hi experts
    I need some guidance for internal disk configuration for oracle
    requirements are for 2 node clustered VM on linux OS OEL
    the OS will be for RAC, OEM
    will RAID 5 be optimal setting
    this is not production env
    thanks

    912919 wrote:
    Hi experts
    I need some guidance for internal disk configuration for oracle
    requirements are for 2 node clustered VM on linux OS OEL
    the OS will be for RAC, OEM
    will RAID 5 be optimal settingFor most definition of "optimal" the answer is "NO"
    RAID+10 provides better performance.
    Handle:     912919
    Status Level:     Newbie
    Registered:     Feb 7, 2012
    Total Posts:     135
    Total Questions:     74 (46 unresolved)
    why do you waste time here when you rarely get your questions answered?

  • What are the requirements for Oracle Locator?

    Hi, when installing a new database, we want to trim out the stuff that Oracle installs by default that we don't absolutely need. However, we do want to make use of the MDSYS.SDO_GEOMETRY type and Oracle Locator (not Spatial).
    Oracle has all these different components, and we jut found out that in order to use Locator, you have to install Oracle interMedia. Is there anything else there that Locator has a dependency on that we would be missing? We intend to install these:
    Oracle Workspace Manager
    Oracle Enterprise Manager
    Oracle Database Catalog Views
    Oracle Database Packages and Types
    But out of the list of the rest of them, what is needed for Oracle Locator?
    Spatial
    Oracle interMedia
    OLAP Catalog
    Oracle XML Database
    Oracle Text
    Oracle Expression Filter
    Oracle Rules Manager
    Oracle Workspace Manager
    Oracle Data Mining
    Oracle Database Catalog Views
    Oracle Database Packages and Types
    JServer JAVA Virtual Machine
    Oracle XDK
    Oracle Database Java Packages
    OLAP Analytic Workspace
    Oracle OLAP API

    Oracle Locator is implemented in the MDSYS userid. (It's included in every version and edition of the database since 8i, including 10gR2 Express Edition.)
    As you have noted, Locator is considered part of intermedia. (In some versions of Oracle, Locator is officially a feature of intermedia, in others it seems to be independent. In all versions, it uses a commono install with intermedia.) The install for intermedia 10gR2 is described at http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14302/ap_instl_upgrd.htm#sthref649
    I believe there are some Locator funtions in 10gR2 that are impemented in Java and require the JVM. The 10gR2 Express Edition (XE) does not include JVM and Locator seems to be mostly functional, but there are areas that do not work.
    Technically you do not need Oracle Text or Oracle XDK/XMLDB. I've found they are extremely useful so I do include them in my minimum installs. They are also included in XE.
    In your list the following are related to separately licensed EE options: Spatial, OLAP and Data Mining

  • Require settlement rule when creating a Prod order

    Hello,
    Hello,
    one of our processes is to fabricate complex tools that will be capitalized and depreciated when completed.
    while the tools is being fabricated, we would like to settle regularly the production order to a capital order (AUC) and track the budget for the fabrication.
    in this production process we want to require the user to enter a capital internal order in the settlement rule of the production order master data..  this way when Prod order is settled we dont have issues.  can you make settlement rule entry as required during production order creation?
    any input is appreaciated on the issue. Thanks
    Andy

    Hi,
    There is no standart control for this, but I know a PP user exit which excatly meet you requirement.
    PPCO0007---User Exit for Checking or Changing Header Fields During Order
    You can first control if it is a production order ( ı think it is a special type to produce auc) that you want to control. Then you can select settlement rule and control and give error message settlement rule is mandotory you can not save. The exit sends a signal that it is not possible to save. For error message you can write code into the exit for the message.

  • Required DG4ODBC related info for Oracle 10 - 10.2.0.1.0

    Hello All,
    I am using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    I would like to know if it is possible to integrate DG4ODBC driver with Oracle 10g coz most of help seem to be available for Oracle 11g.
    And in case it is available, if some one can point to the correct location from where I can download DG4ODBC driver both for 11g and 10g (for Windoze) then it would be great.
    Also any pointers to official Oracle documentation would be really helpful.

    One more question - Is DG4ODBC a licensed product or is it a free product. I am asking this because I am not just being able to find the patch required for 10g ?
    Edited by: Parag Kalra on Jan 22, 2010 6:17 PM

  • WIP calculation for Prod.order with status TECO

    Hello all.
    My question is the similar to WIP calculation for Prod.order with status DLV
    But I need that
    - if the Production order has status TECO - the system calculate WIP
    - if the Production order has status DLV u2013 the system settle the order.
    1.     I try to change u201CStatus Numberu201D in TCODE OKGC. But I have receive two different result:
    - if I change u201CStatus Numberu201D for status DLV from 3 to 2, then during WIP calculation of the order with status DLV u2013 WIP have been calculated.
    - but if I change u201CStatus Numberu201D for status TECO from 4 to 2, then during WIP calculation of the order with status TECO u2013 WIP have been CANSELED.
    2.     I try to change results analysis key for status TECO from u201CZu201D to u201CFu201D in TCODE OKG3. BUT during WIP calculation the system create error message KJ 363 which require that results analysis key must be change to u201CZu201D
    How can I resolve my problem?

    Hi,
    I don't have the answer if the requirement is that even after producing the materials, till the time accountant checks the order and does this action, it should remain in WIP. Honestly it doesn't make any sense to me or i have not understood this problem. Anyways as per my current understanding I can suggest the following process for your scenario.
    Once production is stopped in between the process, the order should be in PDLV status (partial confirmations happened in the order)
    Now go and clear the reservations manually from the production order .( delete the component line items from the order). Now depending on whether you are following WIP at actual cost, system will post the difference between credit and debit of that production order as WIP for the month end process.
    Once Accountant okays the entries in the production order, he can do the TECO and settle the order. Now WIP will be reversed and variance will be posted.
    To avoid the already produced goods mixing up with your other stock, u might want use Quality Management with the help of your PP consultant.
    Best Regards
    Vimal

  • Multiple production orders  are generated for same requirement

    hello guru's
    For a MTO (make to Order) scenario, where the Material requirement quantities are generated from Sales Orders.
    Ex: Sales Order created for 500 Qty.
    I had run the MRP using MD03 with the following parameters
    Processing key              NETCH      Net Change in Total Horizon
    Create purchase req.     1                  Purchase requisitions in opening period
    Delivery schedules       3                  Schedule lines
    Create MRP list            1                  MRP list
    Planning mode              1                  Adapt planning data (normal mode)
    Scheduling                    1                  Determination of Basic Dates for Planned
    System had generated Planned Orders for Qty 500 and these are converted to Production order for Qty 500 for which the Purchase Order for 500 are created.
    Goods receipt of 480 has been made against the Purchase Order for the Ordered 500 Qty.
    When I re-run the MD03 the system is generating the new Production Order Qty 0f 20 which is not supposed to be as this 20 Qty was already part of the existing Purchase Order and yet to be delivered .
    Could you please explain me why this is happening?
    regards

    Dear,
    MRP will consider the firmed PR for the completion date contained in the PR. If the requirements date is different, then MRP will create a new proposal (PR).
    If you wish for MRP to RESCHEDULE the dates of existing firmed purchase reqs, instead of just creating new proposals, you have to set the Rescheduling horizon. OPPQ> Rescheduling (plant) or OPPR >Recheduling Horizon (MRP Groups). Start with a small horizon,  Also check the tick mark for firm reciept there.
    Are you getting any expection message in front of PR?
    MRP will 'assume' rescheduling by configuration, by managing the rescheduling horizon, and by setting the rescheduling tolerances. These config can be found in
    OPPQ select Rescheduling
    or, for MRP groups
    Please check and come back.
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/f4/7d2c9744af11d182b40000e829fbfe/frameset.htm
    Regards,
    R.Brahmankar

  • Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

    Hi All,
    I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
    I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
    Thanks,
    Sudha

    Hi,
    Are you saying first create notification,then service order
    and then Sales order.
    But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
    Thanks & regards,
    chetan.

  • MRP Planned order generation for Order reservation excluding Dependent Requirements

    In our Project we have a requirement like for FG stage & SFG1 stage are M.T.O So after sales order are punched through  MD50 we have created Planned orders against sales orders,But dependent stages like SFG2 & SFG3 which are pure M.T.S so only Dependent requirements will get generated.Suppose for SFG1 i have partially converted planned order to Production order then for component SFG2 we get Partial Quantity as order reservation.Now requirement is if i run MRP for SFG2 system need to generate demand only for order reservation excluding Dependent requirements.Is there any possibility where we can generate demand only for order reservation.As system will create Planned order for SFG2=Dependent requirement + Order reservation

    Hi Uli,
    Suppose i have Sales order--100 kgs for FG
    B.O.M levels
    1.FG-----M.T.O
    2.SFG1---M.T.O
    3.SFG2---M.T.S
    4.SFG3---M.T.S
    5.ROH
    So if i run MRP via MD50 system would generate planned orders for FG & SFG1 level as they are M.T.O specific
    Now my requirement list would be
    FG-100kg planned order
    SFG1-100kg planned order
    SFG2-100kg dependent requirement.
    Now suppose i have partially converted SFG1 planned order to production order
    SFG1--100kg planned order to 30 kg production order
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-70kg dependent requirement & 30kg order reservation.
    Here my requirement is if i run MRP for SFG2 in MD02 as these stage is M.T.S system should provide 30 kg planned order & if we see down the line it would be like
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-30kg planned order & 70kg dependent requirement.
    SFG3-30kg planned order
    ROH-30kg Purchase req
    Client requirement is like these..

  • Required appropriate OCI JDBC driver for   Oracle 9i

    Required appropriate OCI JDBC driver for Oracle 9i Enterprise Edition Release 9.2.0.6.0.

    Stick to one thread please.
    http://forum.java.sun.com/thread.jspa?messageID=9552360

  • Required appropriate JDBC driver for   Oracle 9i

    Required appropriate JDBC driver for Oracle 9i Enterprise Edition Release 9.2.0.6.0.

    And?
    Download them from the Oracle website or get them from your Oracle client application's jdbc directory.

  • Requirement specification for Oracle 9i & 10g database.

    I had a query as to what are the software & hardware requirements for Oracle 9i & 10g. I know of 9i for Windows only at the moment, it requires around 10MB hard disk space & 256 RAM. So, similarly, i wanted to know for other platforms. I hope, my question is clear.
    Please, help in solving the doubt.
    regards

    i don't think that you should worry about minimum hardware specifications as now a days hardware is very cheap and also the minimum configuration new machines available in market are with p4, 256 mb ram, 80gb hdd, etc.
    But still for knowledge minimum requirements information can be found in any oracle sw installation documentations.

Maybe you are looking for

  • Field Cost Ctr is a required field for G/L account

    HI SAP Guru, I have Created an Asset in Test server, once the Asset was created.. I did a Depreciation Run in test server.I encounter this error message. the cost center was created in the asset master, and the GL account was also define in the GL ma

  • IMessage has stopped working on my iPod

    Hi, this is my first post on here, so I hope it makes sense. This morning I tried to send several messages via iMessage however they loaded and then stopped just short of sending. I waited perhaps 20 minutes and still they hadn't sent and then it cam

  • ApplicationUnderTest.CloseOnPlaybackCleanup property doesn't work as intended with MS Test Agent 2010

    Hi All,  I launch the application which I need to test by using ApplicationUnderTest.Launch() method and I need to keep the application open for the rest of the tests so I tried to set ApplicationUnderTest.CloseOnPlaybackCleanup = false to achieve th

  • Illustrator CS5.1 is crashing on *every save*

    Any idea why this is? I've just upgraded to CS5.1 from CS4. Illustrator CS4 used to crash a bit with complex files, and i thought CS5.1 would resolve this but it's a lot worse! i can't save *any* file. i can open the application and open files but it

  • How small of a file can I make to hold three hours of audio?

    I currently have a 3 hour audio segment that is about 200MB. Can you give me some tips on what I can do in Garage Band to make this file smaller? I export the audio in MP3 when I'm done. Thanks!