Produce a FMB for debugging Only ..!!?? Developer 6/6i

Is it possible to produce a FMB for debugging pusposes only.Meaning that i want to make my FMB valid for tracing and debugging Only and it produces an invalid FMX OR a fmx with a MARK like "for Debugging only" that can't be removed through the FMB....
Is there anyway to do that...Oracle Designer or any other tool ???

I have the same problem, I have been killing myself to configure tnsnames.ora in different ways but that never worked. Except sqlplus, not a single front end tool is able to connect to database. And the surprising part is sqlplus does not require any connect string in order to connect to database, just the username and password suffice. I would really appreciate if anybody could help in this regard. I have tried another software like Erwin data modelling tool to connect to database but ... only frustration...Please help.
Thanks,
Mohammad

Similar Messages

Since updating to OS X Mavericks I get a continuous update request for command line developer tools. How do I stop this?

Since installing OS X Mavericks, automatic updates keep producing download demand for Command Line Developer tools 6.0 and 6.1. I don't need these but cannot seem to stop the updates available, even if they are downloaded and installed. Can anyone tell me how to stop this?

Try re-indexing Spotlight.
Spotlight – Re-index

Oracle SQL Developer Release 1.5.5 "compile for debug"

Using Oracle SQL Developer Release 1.5.5 on Windows XP pro machine connecting to 9.2.0.4 database on AIX machine.
Trying to debug a procedure, in the navigator window, I rt-clk the procedure and select "Compile for Debug", then nothing happens. This happens for every procedure I've tried. I've been granted both DEBUG ANY PROCEDURE and DEBUG CONNECT SESSION. Any ideas?

This is the first I've used SQL Developer, so I'll take the blame. I had not noticed that the Messages Log does in fact tell me that the proc compiled. However, the debug icon (little red bug) was nowhere to be found.
I see now that I need to Edit, not Open, the proc in order to debug. If I had read the Help screens a little more closely, I would have seen that I needed to be in Edit mode. My bad. Thanx to all for your responses.

How to configure Sql Server 2008 R2 for debugging without disabling Windows Firewall?

When I try to debug a procedure in Sql Server 2008 R2 I get a dialog box telling me to unblock some ports.
>>
The Windows Firewall on this machine is currently blocking remote debugging. Remote debugging requiers that the debugger be allowed to receive informatino from the network. Remote debugging also requires DCOM (TCP Port 135) and IPSEC (UDP 4500
/ UDP 500) be unblocked.
<<
I went to the Windows Firewall and added some new Inbound rules for each of the specified ports (in the images below. But after this and rebooting entire computer -- I still get this dialog box when I want to go into debug mode from SSMS. I can
actually kind of debug standalone code in the SSMS window if I cancel the dialog box. But I can't debug an actual stored procedure -- which is what I need to do. I also noticed that my server has an IP address instead of LocalHost. This is
not a public Server -- it's my private development machine which is on a peer to peer network (with one other workstation), but I don't need that workstation to be able to access this server.. Would localholst make a difference for debugging? How
should I configure the sql server? The firewall?
Rich P

Use PRINT and SELECT for debugging. That's what I do. I used to play with the debugger in SQL 2000 and older days, but I realised that I spent more time on getting it to work that I gained from using it.
I thought about that. I guess that IS the way to go. Very well. Thank you for the suggestion. Although, when the debugger does work in the regular window (not a stored proc because it doesn't work there) the debugger IS nice.
For debugging my proc I am thinking I will insert param vals into a test collection table for now. One obscure error I am getting with a particular proc -- in a When loop on one parameter I get the "value will be truncated" error -- but everything
is set to accept 1000 characters and none of the source data even comes close to 1000 characters. I have isolated at what point the error occurs and which section of data where the error is occurring but I have not isolated the cause of the error.
I cannot reproduce the error when I run the procedure by hand in a regular query window with the exact same code. The error only occurs when the code is run in the stored proc.
Rich P

Compiling differently for debug and release

I want to produce slightly different .class files for my debug and release compilations. For debug, methods like toString() should return rich information which should not be present in the release version. In fact, I want most of my debug specific code to not be included in the final release to keep ti's file size down.
I realise I can do this by creating something like
public interface MyGlobals {
static final boolean DEBUG = false;
}and implementing this on any class that needs to do debug specific work. However, I'm in a bit of a chicken and egg scenerio. This file needs to exist during development time so that every class that needs it can implement it - however, this would prevent me from dynamically changing it based on whether I'm doing a debug or release build. On the other hand, if the file is generated automatically at compile time, all the classes that need to refer to it will need to refer to a non-existant source file, which will cause problems in my NetBeans IDE.
Is there a way around this? It would be nice if there was some sort of a configuration file you could specify to to alter how the code is generated. Something similar to C++ #ifdef.

I realise I can do this by creating something like
public interface MyGlobals {
static final boolean DEBUG = false;
/code]You should be careful about this, by the way, rember that this kind of constant value gets compiled in to classes that reference it, and java doesn't always pick up the need to recompile when the source of MyGlobals changes.
On the other hand, if you don't declare it final then the compiler can't optimise out code that you want it to exclude for you.

PLW-06015 when compilling for debug

Hi,
I have the error message: "Warning(1): PLW-06015: parameter PLSQL_DEBUG is deprecated; use PLSQL_OPTIMIZE_LEVEL = 1"
each time I compile for debug.
The Oracle database parameters are
plsql_warnings ENABLE:ALL
plsql_debug FALSE
plsql_optimize_level 2
So Why do I have this message?
Seb

Yes,
I can modify everything under Database - PL/SQL Compiler.
Optimization Level is already set to 2.
Here are the other preferences:
ALL: ENABLE
INFORMATIONAL: not set
SEVERE: not set
PERFORMANCE: not set
PLScope identifiers: All
The user for the schema has the DEBUG CONNECT SESSION.
When I change Optimization level to 1 and compile or compile for debug, I always receive the warning message.
When I change Optimization level to 2, I always receive the warning message only when I compile for debug,
In case of, the SQL developer version I use is Version 2.1.1.64 Build MAIN-64.39.
Seb

Windows Pro upgrade with Hyper-V for Windows App development

Hi
I am just starting to develop my first windows phone app. I dowloaded Visual studio 2013 express on my windows 8 machine. I started to follow the Microsoft Virtual Academy, Develop Windows phone apps for Beginners with Bob Tabor.
Anyway, when i try to run the Emulator, it tells me i need Hyper-V which my version of windows doesn't have. Apparently i need Windows Professional. Anyway, this costs about £100 to upgrade. Also, for the emulator i am told i need 4gb of RAM.
Question 1: My laptop is an i5, 64bit machine, windows 8.1 normal edition, with 4gb of RAM. It says of which 3.88gb of ram is usable. Whatever that means?
The minimum requirement for the emulator is 4gb, will it work on my machine which apparently has 3.88 ?
Question 2: I already own a nokia windows 8.1 phone. A basic enough model. Instead of buying the upgrade for windows pro, is it a big hassle to run my test apps on that phone? How difficult is it to run a test build of an app on my phone? Can i run it via
the inside of visual studio? Or do i need to go to file explorer, copy and paste files over to the phone, disconnect it from the laptop etc. How many steps are involved? If its a load of hassle i might be safer to just bite the bullet and buy the Windows pro
upgrade.
(although i am aware the emulator can't test some things that the actual phone can..eg near field communication etc.)
Any advice?
Regards
Conor

It's not that big of a hassle to debug your app by deploying it on your phone. It's just a matter of choosing Device instead of Emulator when you start debugging in VS.
Some of the downsides are that your phone's screen must be on and not showing the lock screen, and the fact that you can only have a maximum of 2 apps installed on your phone for debugging purposes. If you start developing and debugging a third app, then
you must first uninstall one of the other 2 apps to be able to deploy the third app to your phone. To my knowledge the emulator does not have such a limit. I believe there's a paid developer account option available somewhere if you want to raise the limit
beyond 2 apps.
Other than that, being tied to a single resolution as Dave mentioned is another downside to using a device.

What Java compiler for Java Card development ?

What Java compiler and options should be used for Java Card development with the goal of generating correct, and (secondarily) small or/and fast code after conversion to Java Card bytecode using converter ?
In particular
- Is use of JDK 7 approved by Oracle for Java Card development? That would solve security problems associated with (the web components of the JRE of) some earlier JDK, including the latest JDK6. The JCDK 3.0.4 release notes states "+the commercial version of Java Development Kit (JDK software) version 6 Update 10 (JDK 6 Update 10) or later is required+, but that does not answer that question.
- Anyone had _bad_ experience (like incorrect or disastrous code) with the Java compiler bundled with Eclipse ? I have seen at least one case where org.eclipse.jdt.core_3.7.3.v20120119-1537.jar produced slightly more compact code than javac.
- Anyone had _bad_ experience with javac in jdk1.3 ? In an applet involving a "finally" clause, I've seen it generating more compact code than later javac (which in my test triplicated the code for the finally clause).

What Java compiler and options should be used for Java Card development with the goal of generating correct, and (secondarily) small or/and fast code after conversion to Java Card bytecode using converter ?-target -source may be required to generate compatible byte code. Depending on the CAP file converter being used debug information may also help. Remember that Java Card is a subset of the Java language (also there are short opcodes that Java doesn't have etc) so a lot of the work for optimisation is done by the converter or the JCRE. You can look at the JCA code generated to determine what works best for your applets. There are also some ways of stripping out dead code etc from JCA files (return statements after a throw etc) to reduce your code size. Most of the speed optimisations come from your code (avoiding context switches and unnecessary security/access checks).
The compactness of your Java Card binary may not be directly related to the size of your compiled Java code. It can depend on the converter you use and any optimisaitons the JCRE might try to do when the code is loaded.
- Is use of JDK 7 approved by Oracle for Java Card development? That would solve security problems associated with (the web components of the JRE of) some earlier JDK, including the latest JDK6. Java Card does not use any of the libraries from the JDK/JRE. All of the libraries are provided by the JCRE on the smartcard.
The JCDK 3.0.4 release notes states "+the commercial version of Java Development Kit (JDK software) version 6 Update 10 (JDK 6 Update 10) or later is required+, but that does not answer that question.Anything above JDK6u10 is supported. If you use Java 7 you may need to add a -source and -target flag when compiling.
- Anyone had _bad_ experience (like incorrect or disastrous code) with the Java compiler bundled with Eclipse ? I have seen at least one case where org.eclipse.jdt.core_3.7.3.v20120119-1537.jar produced slightly more compact code than javac.We generally use the Eclipse compiler as we find that we get more deterministic builds. When CAP files are sent for security review it is helpful to have the reviewer able to generate a CAP file that matches the one you sent to confirm the binary is what you say it is.
- Anyone had _bad_ experience with javac in jdk1.3 ? In an applet involving a "finally" clause, I've seen it generating more compact code than later javac (which in my test triplicated the code for the finally clause).We do not use anything less than Java 6 for compilation.
- Shane

Adobe Photoshop CS6 provides no engine for debugging

Hello,
I've been trying to diagnose a problem with my wife's copy of CS6 Web and Design premium. Basically it's unable to run any JSX script that requires the Debug engine. I receive the error message 'Adobe Photoshop CS6 provides no engine for debugging' - trying it on Illustrator also gives a similar error. Persisting by clicking the 'play' button brings up a popup error message that says 'Unable to Run Script' or something similar.
Note that if I hack our JSX script to bypass the debug engine it works fine - except certain PSDs will cause CS6 (and my older copy of CS4) to crash, so this is only a stopgap measure. Disabling OpenGL on CS4 seems to prevent crashing but it's not an option on the wife's copy since she's a full-time artist and I'm not.
This is what I've had to change -
$.level = 2; // debug level: 0-2 (0:disable, 1:break on error, 2:break at beginning)
debugger; // launch debugger on next line
Changing the $.level = 0 lets me continue without issue.
This problem does NOT exist on my laptop using the same installer downloaded from Adobe.com. (I use trial version for testing, she uses her serial no.)
Is it possible this problem persists because I uninstalled an old copy of Photoshop CS5 (standalone installation) AFTER installing CS6 Web & Design (multiple programs)?
I've tried uninstalling and reinstalling CS6, but the problem persists.
Please help, our jobs rely on this. >.<
Worst case scenario I'll copy the entire install folder over from my laptop to try and fix the problem but I'd rather not have to since we're currently working in different countries and I can only use Remote Assistance to help.

The problem is the SCRIPTS work - the debugging engine is what's missing for some reason. Even if there's a way to just cleanly uninstall everything so I can start from scratch without formatting the hard disk would be a good solution. (since apparently I think I missed some files somewhere on the last uninstall)

Can I use macbook air for ios app development?

I would like to know if i can use macbook air for ios app development or macbook pro is only option?

Just to reinforce what shldr2thewheel says - be very sure what size memory you want if you get a Macbook Air. There is *no* way to change after purchase. My advice is to go for the 4GB option - especially if you want to do app development.
The internal storage (solid state drive) of the Air can be upgraded if required but it will probably be an expensive option. If you don't think the storage will be enough then maybe using a USB connected drive to hold non-essential files is an option.
As to deciding between the Air and Pro you are basically making a decision between portability (Air) and expandability/bigger screens (Pro). What is more important to you?
Mark

Disable Save or Save As for Read Only mpp file

Hi,
I have a read only mpp file and need to make sure that it cannot be Saved / Saved As by anybody in Team. They should only have access to view the file.
How can enable a file which does not allow save / save as?

ihvarrived,
You didn't mention anything about being in a Project Server environment, so I assume Shiva's response has no meaning for you.
With regard to an approach to prevent unauthorized users from saving a file let me again stress that, in my opinion, the best approach for this issue is training. That has the great advantage of mutual respect and cooperative effort in a team environment.
To implement a more covert approach you will need to do the following:
1. With the file open go to Developer/Code group/Visual Basic
2. Hit the Project Explorer icon
3. In the Explorer hierarchy, under the VBAProject double click on the "ThisProject"
4. In the code window, paste the following code:
Private Sub project_open(ByVal pj As MSProject.Project)
MsgBox "This file is write protected. You can make changes" & vbCr & _
    "for temporary what-if scenarios, but you will not be" & vbCr & _
    "able to save without the correct password", vbExclamation, "Warning!"
End Sub
Private Sub project_beforesave(ByVal pj As MSProject.Project)
pass = InputBox("enter save password")
If pass <> "xyz" Then 'string in quotes is the password you chose for saving, "xyz" is for illustration only
    SelectAll
    EditDelete
End If
End Sub
5. While still in the code window, go to Tools/VBA Project Properties/Protection tab
6. Check the "Lock this project" option
7. Enter and confirm a password. It can be the same as your save password or a different password (This will insure that only you can view and modify the above code)
8. Hit OK, then File/Save [your filename] to capture your macro in the file. Note, at this point you will be required to enter your save password.
Be advised that if a user does attempt to save without the correct save password, the file will be zeroed out and saved (i.e. nothing). That means that whenever you save the file you should also save a backup under a different name, so you can restore the
file if necessary. I couldn't figure out a good way to work around this problem. If the user always tries a "Save As" this wouldn't be an issue, but if they chose "Save" and you don't have a backup, you're screwed.
If this answers your question or is at least helpful, please mark it accordingly.
John

Best practice for read-only functionality

Hi,
I'm part of the development team of a system with about 100 screens. The customer would like us to add some read-only functionality to the system, so that certain users are able to access the screens but not change any of the data on them. We already have policies in place on the database level that keeps read-only users from saving data, but it's not very user friendly to allow users to change data on a screen, only to tell them that they're not allowed to save those changes once they try to do so. It would clearly be better if all components are rendered as read-only components for read-only users, making them unable to make any data changes in the first place.
User privileges in the system are controlled by roles defined and set in the system (not ADF roles or Weblogic roles). At any given time and place, it's possible to check whether the current user has a certain role. We already use this in a number of places to make it possible to control which user has access to which screens. In a few places we even control which functionality should be enabled for the current user within a screen, but mostly the access control is currently on the screen level. With read-only users getting access to all screens, it seems we will need lot of extra in-screen access control to keep these users from changing anything.
But what's the best practice here? One way to go would be to add some logic to every single active component on every single screen, to determine whether it should be rendered as active or disabled/read-only. But that would require a lot of extra coding.
So my question is: Is there a smarter way to do this? Maybe something done through skinning? Or something else?
(I'm not sure how relevant this is for this sort of question, but we're currently using JDev 11.1.1.4.0, and expect to upgrade to 11.1.1.6.0 within the next 6 months)
Best regards,
Andreas

Hi Guna, Puthanampatti and Don,
Thanks a lot for your replies. I'm currently looking into implementing something along the lines of what Guna has suggested:
Our application consists of a number of individual work spaces that are deployed as adflibs which have all been added to a "master application work space", and the master application is deployed as an .ear file. Most of the individual work spaces are for all the different functional areas of the application, with their own task flows, page fragments etc. The rest are work spaces with common functionality, like datamodel (entity definitions), utility methods, page templates, and framework extensions. In the latter, we have defined custom classes for all the base classes (somewhat similar to what Don describes, I believe).
In our custom class for ViewRowImpl, I have added an isAttributeUpdateable method, and in our custom class for ApplicationModuleImpl I have added an isReadOnlyUser method. The isAttributeUpdateable method uses the isReadOnlyUser method to determine if the current user is a read-only user or not; if the user is a read-only user the isAttributeUpdateable method will return false, otherwise true. The isReadOnlyUser method in our base class is just a dummy method that always returns true. But in the ApplicationModuleImpl classes of our individual work spaces, i've written an override for isReadOnlyUser, giving the answer that is relevant for the work space in question (for instance, whether or not the current user has the role "User Administrator").
That pretty much takes care of all input fields in tables and forms, which is a big step in the right direction. This still leaves some work to be done for components that are not directly linked to view object attributes (like buttons), but I guess that can't be helped. Also, there are a few of the work spaces that contain a number of pages that are related to different user privileges (as in: page 1 requires user privilege A, and page 2 requires user privilege B); in these cases I will have to do something different than just writing an override in the "local" ApplicationModuleImpl class.
@Don: What you describe seems to be pretty close in functionality to what we already have, though your implementation is different from ours. You have used your custom base ApplicationModuleImpl class to keep read-only users from committing changes. We use Virtual Private Database and database policies to the same end: If a user without the required full-access role tries to commit data it will cause a database error, which we then handle in the application (so the user gets a message like "You don't have the required privileges to changes this data", rather than an ORA message). Unfortunately, our customers are not content with this. They want a solution where all input fields and most of the buttons etc. are disabled for read-only users, and that's why I'm looking into the best/smartest way to do this.
@Puthanampatti: We already use something similar to what you're suggesting. The challenge I'm currently facing is how best to disable/enable components based on the current user's roles, not how to determine and store those roles.
Best regards,
Andreas

For pure AS3 development do we still need to overlay the FLEX SDK?

Hi Guys
I've found this whole SDK overlay business a mess and very confusing. I've found this document
http://www.adobe.com/devnet/air/articles/ane-android-devices.html
which states
"The distribution of the AIR SDK with ASC 2.0 is for pure ActionScript development only. It should not be combined with an existing Flex SDK.
To support Flex application development with newer versions of the AIR SDK, an AIR SDK overlay distribution that does not include ASC 2.0 needs to be overlaid over the Flex SDK bundled with Flash Builder 4.7."
So if we are doing pure AS3 development there is no longer any need to do any 'overlaying' of one SDK Folder onto another. We just need to get the latest AIR SDK with complier ( http://www.adobe.com/devnet/air/air-sdk-download.html )
We should then update the AIR SDK if using Flash Builder via ( http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder. html ) (Note it still uses the term 'overlay' but you are not really overlaying but replacing).
Is this conclusion correct. Do we just need the SDK with the new compilier and nothing else ?
Can someone from Adobe confirm please ?
Thanks
PS - I've asked this question on the Flash Builder Forom but there's been no response.

Yes, that's correct, for pure AS3 development you need not use the Flex SDK overlay. For this you should use asc2 compiler available at http://www.adobe.com/devnet/air/air-sdk-download.html . Also below are step to overlay your AIR SDK with Flash builder 4.7
1. Exit Flash Builder.
2. Back up the AIR SDK availabe at Application/FB4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/ by copying the entire directory and rename it to something AIRSDKversion. Now, you have two folder AIRSDK(default one) and AIRSDKversion(copied one).
3. Download the appropriate AIR SDK file for your operating system e.g. http://www.adobe.com/devnet/air/air-sdk-download.html unzip and save it on your MAC OS X.
4. On Terminal, run the below command
sudo ditto /path/air3-8_sdk_sa_mac /Applications/Adobe\ Flash\ Builder\ 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK
/path/air3-8_sdk_sa_mac -> path where you downloaded the AIR SDK
/Applications/Adobe\ Flash\ Builder\ 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK -> path where you overlay the new AIR SDK
5. (Optional) To access the new AIR 3.8 APIs, update your application descriptor file to the 3.8 namespace.
To update the namespace, change the xmlns attribute in your application descriptor to: <application xmlns="http://ns.adobe.com/air/application/3.8">
6. (Optional) To ensure that the output SWF file targets SWF version 21, pass an additional compiler argument: -swf-version=21.
Hope this will help.
Regards,
Nimit

Connect with different server for debugging

hi to all,
is it possible to connect to a different server for debugging? this is to share the development environment !!
please advise.

Hi,
Thanks for your question
You can create SharePoint 2013 project in your Visual studio 2013 without installing SharePoint on your local machine.
Please follow below steps : Go to the server where SharePoint 2013 is installed and follow steps from 1 to 3
Go to Run and type "regedit"
Navigate towards HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
Right click on 15.0 and click Export. Save the exported file
Now go to your machine where sharepoint is not installed and follow below steps:
Now open Registry on your machine
Import the 15 directory which was exported from SharePoint server
Open Powershell
Run this command
Set-ItemProperty -Path "HKLM:\Software\Microsoft\Shared Tools\web server extensions\15.0\" -Name "Location" -Value "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\"
Now open visual studio 2013 and you will be able to create SharePoint 2013 project without error.
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Error occurred in deployment step 'Uninstall app for SharePoint': Only users who can View Pages can list Apps

While deploying the SharePoint Hosted App I am facing the issue 'Uninstall app for SharePoint': Only users who can View Pages can list Apps"
- Provided the permissions for App Management and Subscription Services as well as DB.
- Added into Host web as SC Administrator
Thanks in Advance.

Hi,
The user you are running with Visual Studio should have read permission on the pages of SharePoint web you are trying to deploying your app.
I suggest you add the login user to the SharePoint web in the “Site Settings”->”People and Group”.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/68590/error-occurred-in-deployment-step-uninstall-app-for-sharepoint-only-users-who
More reference:
Step by step How to configure environment for app development:
http://gianespo.wordpress.com/2014/01/30/step-by-step-how-to-configure-environment-for-sharepoint-app-development/
Best regards
Zhengyu Guo
TechNet Community Support

Produce a FMB for debugging Only ..!!?? Developer 6/6i

Similar Messages

Maybe you are looking for