Product costing Template - adding new function in Environments CTU6

Hi Guru!!
I need to create a new function in CTU6 (Define Environments and Function Trees) in order to have information stored in MBEW table and use them in CPT2 (Template).
The goal is to calculate a value for each material/plant and add that value during the cost estimate (CK11N / CK40N).
Could someone help me? How can I add a field of MBEW in CTU6?
Thank you very much in advance!!
Marco

Hi Marco,
Please check SAP help for functions maintenance:
http://help.sap.com/erp2005_ehp_06/helpdata/en/8e/f9bd66ef0e11d1a5c70000e82de878/content.htm
Regards,
Szymon

Similar Messages

Error adding new function in order template

Hi,
When i am trying to add a new function to order Template under /contolData/Functions/ form data dictonary
I am getting error :
Element with same name exist.The following nodes can not be added to the order.
(no namespace):/ControlData/Functions/MyNewFunction
(no namespace):/ControlData/Functions/MyNewFunction/componentKey
Thanks
Harman

Hi Harman,
You might need to be more specific before I can help you. What have you done, and which step you run into the error? I supopse you have created a new "function" Order Component, and created the required Control Data nodes in Data Dictionary (what have you added?), right? So, when you go into the Order Template tab of the new Order Component (which would be empty since it was newly created), and you try to "select from Dictionary" the corresponding ControlData for the function (e.g. /ControlData/Functions/MyNewFunction), that such an error occurs?
Have you assigned a process for this Order Component? Studio does not allow adding control data to it unless a process is assigned.
Btw, you should define a namespace for your Order Components (and other orchestration entities). The OSM server uses namespace to locate these entities among cartridges.
Cheers,
Daniel Ho
Product Management -- OSM

Product costing - Template - Flexible function

Dear all,
I am using a template in product costing. I would like to use a flexible function, but do not get any result out of it. When I follow the SAP documentation, I constantly run into situations not conform the SAP-documentation.
Has anyone set this up, has anyone a good documentation about it please ?
Kind regards.
Franciska Brys.

Hi Marco,
Please check SAP help for functions maintenance:
http://help.sap.com/erp2005_ehp_06/helpdata/en/8e/f9bd66ef0e11d1a5c70000e82de878/content.htm
Regards,
Szymon

Adding new function & menu to apps

Hi i am newbie to apps
i am working with forms and reports and having access to apps ,I like to know how can register my function with specific menu and to specific responsibility.I searched this forum but didnt found a clear steps.I also like to know create and register menu in apps
thnks
ramya

Ramya
I will give you a brief explanation, but you will find more details in the document Oracle Applcations System Administrators Guide, whcih can be found on MetaLink.
Functions are used to associate a form or procedure with a menu item. The seeded forms and self service functions all have functions pre-defined. If you create new forms or self service procedures, you will want to create a new function to associate your versions to.
Once you have defined a function, you need to associate the function to a menu. If the function can be accessed directly from the menu, you need to have a menu prompt which the user can use.
Then you associate your menu (with its functions) to responsibility. You can control which menu items you want the user to access by adding 'menu or function exclusions' to the responsibility. In this way, you can have one menu, but with different variations used in different responsibilities.
There are manyu variations on this theme, but I hope this basic explanation points you int he right direction.
Regards
Tim

Error while adding new function to HRMS fast formula

Hi,
when i m trying to add a new external function to BG_ABSENCE_DURATION formula, it is getting verified successfully. But when i m trying to save it, it is giving error as below:
APP-FF-33980: Internal error.
A compilation error has been detected while attempting to generate package FFP294_01011900
Please consult your system administrator.
I have compliled the package successfully using TOAD and registered the function using Define Function form. Please help me to resolve this problem.

Usually this error occurs when the called function has not been properly defined. You say you have defined it, but check that the parameters are the same in the FF call to the function and the function itself.
If that is OK, I would then create a new FF with all the same code and try to save that
Finally, if all else fails, check MetaLink as thee are a few references to other problems in this area which require patches to solve them.
Regards
Tim

Oracle Terminal. Adding new Function. Forms6i

Hi all, in Oracle Terminal I would like to map the key F2 with the trigger KEY-F2. The question is, what should I enter as 'action' in the key binding definition window?
Thanx.

Frank, if he is using Client/Server Forms 6i, then Oracle Terminal is the only way to do it.
I think you can create an action with any text you want. You just have to use exactly the same (case-sensitive) action in both places: Key Bindings and Edit Actions.
My Key-F2 is defined this way:
Under 'windows-sqlforms', runform, normal, Edit Key Bindings:
Action: KEY-F2 Trigger
Binding: F2
Under 'windows-sqlforms', runform, normal, Product Actions:
click the sqlforms, runform, normal circle, then Edit Actions:
Action: KEY-F2 Trigger
Code: 84
Description: F2 Key for special uses
Oracle Terminal is one tough app to use!

Flash template adding new gallery sector

Hi All !
Thank you for your attention.I bought a flash tamplate.in description it was like ` no flash experience is required `..thats why i bought it..
but now i can only edit that pictures thats all..
here is my website http://www.zebercet.com.tr
on gallery. there are three sectors..but i cannot add anymore..
i know a little php html but flash is totally different language for me..
If someone could help me..i will be the happiest man on all over the world
thank you so much..

There doesn't seem to be anything at that site address. In any case, it won't do much good to look at the finished flash file. Can you share the template that you downloaded? It is sometimes difficult to adapt templated flash files.

Help with a database template - Desktop Product Inventory Template

Hello Developers,
I'm trying to develop a database to track purchase orders, supply levels, and supplies issued (with reports). I've been working with the MS Access template called "Desktop Product Inventory", but it has more functionality than I need (i.e. shipping,
sales, invoicing). This template is almost exactly what I'm looking for.
I've tried removing the fields I don't need, but I encounter errors everytime. Frustrated, I created a new database by studying and copying the format of the template. I have the general structure of the database setup with tabs, but I'm completly lost when
it comes to formatting/coding the database. I'm not sure what needs to be done in order to recreate the functionality from the original template.
Unfortunately, I must admit that Access is my least favorite and used MS application.
So, my questions are:
1.) Does anyone know of an "effective" way to edit the Desktop Product Inventory template and maintain functionality?
OR
2.) Would someone mind taking a look at my database and giving me feedback? It's essentially just the layout and what I want the database to show.
Any and all help is appreciated, thanks for reading!

The Microsoft template apps have a lot in them - which is why they are particularly difficult to modify by the novice - so don't feel bad.
A database that does Inventory, shipping, sales, invoicing - is going to be complicated inherently, and is really a matter of development familiarity and experience.

Adding new column to production database

I have to add a new timestamp column, that defaults to the current date/time, to an existing production database. The table is large - 150M records. I am trying to understand the ramifications of adding a new column to a table this large that gets hit often, mostly with inserts and reads. The column does allow null values and I am not going back and populating existing records with a value. Basically, I am looking for some best practice guidelines - how to prepare, what to expect, what other processes should be followed along with this schema update.

Radiators wrote:
Thanks, I have not found any %TYPE or %ROWTYPE dependencies on the table I am altering. But at the same time I do not understand how these types of dependencies would invalidate packages. I wouldn't be breaking any %TYPE dependency because I am not dropping columns, only adding a new one. And according to documentation for %ROWTYPE - "If columns are later added to or dropped from the table, your code can keep working without changes." Can you point me to Oracle documentation that describes your concern in detail? Thanks.you can test it yourself
SQL> CREATE TABLE abc (c1 NUMBER);
Table created.
SQL> INSERT INTO abc
2       VALUES (99);
1 row created.
SQL> CREATE OR REPLACE PROCEDURE test_proc
2 AS
3     v   abc%ROWTYPE;
4 BEGIN
5     SELECT c1
6       INTO v
7       FROM abc
8       WHERE ROWNUM = 1;
9 END;
10 /
Procedure created.
SQL> SELECT object_name, status
2    FROM user_objects
3   WHERE object_name = 'TEST_PROC';
OBJECT_NAME                STATUS
TEST_PROC                    VALID
SQL> ALTER TABLE abc ADD (c2 VARCHAR2(10));
Table altered.
SQL> SELECT object_name, status
2    FROM user_objects
3   WHERE object_name = 'TEST_PROC';
OBJECT_NAME                 STATUS
TEST_PROC                     INVALID
SQL> you should also consider the chance that some where if people are using "select * into" using this table, which will fail since you added new column. i don't see any unusual performance bottlenecks by adding a new column. in case of the backups, yes the earlier backups will not have the column. if you restore it, you will see earlier table structure itself. i have one specific question. why are you not attempting this in development/test environment first? even if it is a simple insert, it's always important to do it in test environments before attempting on production db. one thing for sure i know is, after adding column, you will have to recompile all the invalid dependencies. i think, it's better if you attempt it in test db and come up with any issues you see rather than asking a general question where problematic scenarios are plenty and rarely unknown before hand.

Adding new project mask in Production Client

Hi,
I have requirement of adding new project mask code for Production client.
As SAP standard functionality does not allow you to add any new project
mask once you create a project .So if I try to add new mask system will not
show me projects already created and released.Is there any solution to this
problem?
Ranjit

Hi Ranjit,
You did not specify exactly what type of new mask you are adding. For example, maybe you simply need to modify an existing code. You can make two changes to existing codes that have projects created.
1. You can extend the length of the mask to the complete 24 characters, if not already 24 characters.
2. You can change any 0 (numeric only) character in the mask to an X (allows alphanumeric).
The best means to see what project codes are already in use, you should run SE16 for table PROJ and PRPS. You want to view the fields in PROJ-PSPNR and/or PROJ-PSPID as well as PRPS-PSPNR and PRPS-POSID. So, any project code beginning values (A, B, C, etc; 1, 2, 3, etc) displayed cannot be setup as new project codes.
Yes, you could delete the old project codes after archiving the structures, but you also have to (or should) archive any associated financial documents. As the previous responder stated, this is not a trivial task.
Points appreciated....
Regards,
Kent Bettisworth

Mac or PC ? - I believe that Adobe switched the processing functions for 3D rendering in Photoshop CC to VRam. To upgrade the Vram on my existing iMacs cost-effectively entails new upgraded iMacs. Is this affecting any of the other applications in the su

Mac or PC ? - I believe that Adobe switched the processing functions for 3D rendering in Photoshop CC to VRam.
To upgrade the Vram on my existing iMacs cost-effectively entails new upgraded iMacs.
So I am now needing to purchase new desktop computers for production purposes and seperately for an education institute - PC's or Macs?
Is this shift to Vram for image rendering affecting any processing functions of the other applications in the suite - the ones I use the most are Photoshop, Bridge, Lightroom, Illustrator, Premiere, After Effects, inDesign, & SoundBooth
I also use Strata 3D, Lightwave, Maya, Cinema 4D, Logic Pro, Final Cut Pro,
I will be using the suite in a Graphic design, Photography, Video editing / sound recording / editing (I am also a musician), animation and 3D context.

This forum is primarily for a few users like me to answer questions about installation, serial numbers and general issues regarding the Creative Suite. We don't have to expertise to answer questions like you're asking. Otherwise, few people visit this forum.
You'd do best to pick the forums of the applications you use the most, especially applications that test the limits of your computer (probably Premiere, After Effects, and Photoshop) and ask in those forums.

Old material overwritten by new material code in Product cost collector

Hi SAP Gurus,
How can I work around if a product cost collector with material XXX has been overwritten by a new material YYY when creating the KKF6N.
Both material code having the same plant, same orde type,same production version but just different material code.
When saving the preliminary costing for the product cost collector for material YYY, the system prompted me the order number 700022 which is already existing and created for material XXX.
By right, this shd not be happened but indeed it did.
Now when displaying the report S_ALR_87013127 - Order Selection, the report showed the new material YYY was created with order number 700022 but the content of the data was for old material XXX.
Now my problem is how can I get back the product cost collector for material XXX as the original order number 700022 was meant for material XXX and not mat YYY.
And also when executing backflush (MFBF) for old material XXX, the error msg prompted as 'content of order 700022: Mat YYY transferred to interface (IMSEG):Mat XXX due to this I can't backflush material XXX.
Really appreciate your expertise on this urgently.
many thanks!

problem due to system bug, have to log to OSS for help.

Logistics cost to be added in product cost

Dear friends,
We are operating logistocs vehicles on every day morning to collect materials from another plant and also get materials from suppliers..
If the freight rate to be provided to logistcs is a constant value, we can give the rate in PO conditions inorder to add the freight cost in product cost.
Rate to be provided to logistics vehicle will be varied based on the weight and space occupation of a material and the type of vehicle used (like LCV, HCV...)
1. Incase of STO (Material from another plant) how to include the frieght rate in receiving plant product cost. Because the ratre is not a constant one it will be varied based on the above situations.
2. Incase of regular purchase order how to handle the same situation of adding freight cost in to product cost.
Thanx in advance.
Warm regards,
M.Selvaganesh,

Hi,
Check in the Below path
SPRO >> MM >> Logistics Invoice Verification >> Incoming Invoice >> Configure How Unplanned Delivery Costs Are Posted
Here check is there any GL code is maintained against your company code.
If its maintained then remove & post the invoice, then it will hit to your inventory acc
Regds,
CB

Hello!, I´m new using apple products. I added som pics to My Photo Stream/Uploads on Windows and only appear on Apple TV. I want to see them also in my iPad and iPhone. What I need to do?

Hello!, I´m new using apple products. I added som pics to My Photo Stream/Uploads on Windows and only appear on Apple TV. I want to see them also in my iPad and iPhone. What I need to do?

Set up the same iCloud account in Settings>iCloud, then turn photo stream to On.

Standar cost and product cost collector not updating the new price

Hi,
Created Standard cost estimate for one FG product and runned the product cost collector. Based on that consumption delivery everthing is made. Later on the work center and activity type changed in routing. Now i am trying to run the standard cost with new activity price (due to work center change) for the current period, system is showing only the previous rate(previous period) and it is not updating the new price becuase of already we have created the product cost collector.
Can any one give the suggestion for how to update the new price in standard cost as well as new price updation in product cost collector.
govind.

Hi
1. If the original cost estimate was run in the current month - Then you cant re-release cost estimate unless you reverse it from CKR1
If the cost estimate was of previous months - then you can definetely release it again
2. In cost collector, you need to manually cost it again using the Preliminary costing feature... Your cost coll will then show 2 cost estimates i.e. One from Original date to current date-1, and 2nd from Current date to 31.12.9999
br, Ajay M

Product costing Template - adding new function in Environments CTU6

Similar Messages

Maybe you are looking for