Production Order quantity should be same as Sale order line item qnty

Dear experts
we have one user requirement as such
Production Order line item quantity should be same as Sale order line item qnty.
suppose for SO Line item he is ordered 100mts,Production of this paricular Line item should also be 100mts it should not be more than this,How to satisfy his requirement.
Regards
Sandeep patil

Hi,
If the Manual intervention is eliminated for processing of the data then the SO Line Item Qty will be equal to Production order Qty.
Background Jobs for MRP Run, Planned Order to production order cretaion will help you to manage this, along with effective Authorization Management.
Regards,
Siva

Similar Messages

Restricting prod order quantity from being higher than sales order quantty

Dear Experts,
I create production order interactively through co08 ( prod order with respect to sales order). the prod order automatically picks up the quantity in the sales order which is desired, but this order quantity field in the prod order is editable (i.e can be made higher or lower). Please how do I restrict this prod order quantity from being higher than the sales order quantity?i mean what should be done to make system disallow the prod order qty being fixed higher than thesales order qty?

Hi,
Even though you create the production in refernce to the SO, the order quantity can be alter.
This is a normal behaviour of the system.
To restrict any change in the order quantity, you can use tarnsaction variant for CO08. T code is SHD0.
Secondly you can use the following enhancements to restrict the same,
PPCO0006
PPCO0007
Hope this helps you.
SmanS

Unable to change the order quantity value during save of sales order

Hi Experts,
There is a need to change the order quantity value, based on some conditions, when pressed 'ENTER' or during 'SAVE' of the sales order (VA01, VA02).
We are trying to change the order quantity value (KWMENG) in table XVBAP in the subroutines userexit_field_modification, userexit_save_document and userexit_save_document_prepare of the user exit 'MV45AFZZ'. But the change is not replicated to field on GUI.
The order quantity value can be changed in subroutine 'userexit_move_field_to_vbap', but the subroutine is not getting triggered when user changes only the order quantity on screen.
Please help us in resolving this issue.
Regards,
Santosh

Thanks for your time guys. The issue is resolved.
SAP is not triggering the vbap user exit as the order quantity on screen is in structure RV45A.
There are two ways of resolving the issue.
1. Implement the SAP note #513342 - Quantity change and USEREXIT_MOVE_FIELD_TO_VBAP. But, it is SAP modification note.
2. Write the code in VBEP exit of MV45AFZZ. This user exit is called whenever the order quantity is changed. But, it is called multiple times in some cases. Hence, need to write code to limit our code execution only once e.g. maintain a global table with our quantity & uom. Check when the quantity and uom in our table is same as quantity on screen. If not, exit from user-exit.
Edited by: Santosh Kacham on Nov 11, 2011 6:37 AM

Need Minimum Order Quantity to show up on Sales Order

We do private label manufacturing jobs. We have defined the Minimum Order Quantity in the Item Master under Planning. I am trying to get that info to populate on the rows if that item is selected. I don't see that field as an option on tghe form design. Any ideas?

1.You should define a user defined field in the marketing document rows and
2. make a formatted search to fill it with the minimum order quantity.
( The formatted search may look like this:
Select I.MinOrdrQty From OITM I Where I.ItemCode=$[$38.1]
And you should set auto refresh when exiting altered column item no.)

Warning message, if Quantity=0, when creating a sales order with VA01orVA02

Hi Experts,
Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).
So, I need to change it to hard error message type, am changing the message type, but, its not reflecting, and still its throwing a warning message(VU001)!!
Let me know that, What is the correct user exit to incorporate my changes?
From where this message generating? am keeping a watch point with this message (VU001), but, its not stopping!!
System is ECC 6.0
repliaes appreciated
thanq
Edited by: SAP ABAPer on Dec 22, 2008 4:38 PM

thanq
(the reason, why my original code was worked is that, I put my code in SAVE user exit!!)
yes, its working, but, the scaenrio is different, so, its like,
if the user entered my_matnr with quantity = 0,
then presses ENTER,
now, we are getting a WARNING MESSAGE of message class & # is VU001, saying the Item 000010 is quantity 0...........so, here I need to change it to HARD ERROR message.
So, as soon as press the ENTER button(after enetring 0 qty matnr)........I need to get HARD error message, so, where should I incorporate the changes? is it MOVE FIELD TO VBAP user exit?
thanq

Delivery Number same as Sales Order

Hi
My requirement is I want to create delivery the number is same as sales order number.
Let say If SO number is 100 , delivery has to be created with same number immediately.
I want user-Exit or BADI to pass SO number
Could please help me
Best Regards
Achanta

Do you mean to say there will NOT be any partial delivery in this scenario ?? Even if partial delivery is not allowed, it will not be ideal to implement this requirement through exit. Let us assume, at a later date, you have generated a delivery for an order and subsequently, you reversed the PGI and delete the delivery. Here what should be your delivery number range for the newly created one.
If partial delivery is there, then definitely, this is not at all possible. Think practically always before you take any decision or implementing anything in SAP.
G. Lakshmipathi

How to have confirmed quantity 0 for credit blocked sales orders

Hi!
I have the following problem. I have one sales order blocked because credit. Using material A the quantity confirmed is 0 but using other material B the quantity is confirmed. All the materials have no avaliability check group no arelevant for vailability .
How can I customize in order to always have quantity confirmed in 0 for sales orders bloked because credit check?
Thanks in advance for your help!
Regards,
Marina.

I resolved the issue

Forwarding Agent should come automatically in Sales order

Hi Experts,
My user's requirement is Forwarding agent should come automatically in Sales order at partners tab.
Can you please suggest what configuration do ineed to do,
To get this Forwarding agent automatically in sales order level.
Regards,
Sunina

Hi Sunaina,
create a vendor with XK01 with the required Forwardng Agent. At the time of creating customer master record assing this FA. Now at the time of sales order creation this FA is defaulted automatically.
Incase you have multiple FA's then also you assign all of them to customer master partner tab with partner function FA.
During sales it will give you a pop up to select the required FA.
Make sure that partner function FA (or incase if you have created a new also) this is assigned to the account group of customer master you are using.
I hope this answers your query.
regards
sadhu kishore

Sales Order Report Showing Cost on the Sales Order & total invoice dollars

I am looking for a report in SAP that shows you the Sales Order number, the cost on the sales order (NOT the average cost) the actual cost on the sales order detail line and then the total invoice dollars in month to date and year to date?
Thanks,
Linda

You can use T.code: COOIS if Product Costing has been configured for MTO scenario whcih gives the costing details.
You can also use To.code: KE30 if CO-PA implemented.
but if you want to link with billing, Please search for any reports in Sales information system.
One more you can create a ABAP Query Report using T.code: SQVI
Regards,
Anbu

*Internal Order* or *Cost Center* on SD Sales Order

Hi Gurus,
please can you tell me how we can set automatically Internal Order or Cost Center on SD Sales Order (without putting it manually).
Thank you very much
Kind Regards
Andrea

Hi Andrea,
As Ambrusa told, one Z table should be created where you can maintain order reasons, sales org, sales order type and the internal order no. as combination and use the below mentioned user exit.
When user create sales order, system will default the order reasons maintained in the z table and internal order no. will be picked as user select the order reason.
Hope this will meet your requirement.
Regards
Suresh.

Copy purchase order number and date from one sales order to other sales ord

Hi,
I am creating sales order in va01. here i am entering purchase order number (p100) and date. Sales order number ex: 42000
I am creating another sales order with reference to 42000. when creating sales order with reference to 42000, purchase order number (p100) and date has to be copied automatically from that order.
Can anyone please give me a solution?
Thanks in advance
Babu

Dear Babu,
Currently, PO number is being mentioned in copy routine 101 but this
field VBKD-BSTKD is being cleared out.
If we check this routine code:
FORM DATEN_KOPIEREN_101.
Data which is not copied
Pricing date for consignment issue by external service agent from
the scheduling agreement
IF CVBAK-VBTYP CA VBTYP_LP_EDL.
 CLEAR VBKD-PRSDT.
ENDIF.
PO data should not be copied
CLEAR: VBKD-BSTKD, <<<<<
 VBKD-BSTDK,
In order to achieve your requirement, you need to consider creating you
own copying routines for VBKD fields copying standard copying routines
(for example copying routine 101) according your business requirements
and change them via transaction VOFM, in order to:
- deactivate the LOCAL: statement
- delete the clear statements
Once you have created those two routines to match your business needs,
you can insert them in transaction VTAA, so the sales order will copy
the PO date at item level.
I hope I was able to help you.
Kind regards,
Zsuzsanna

One sales order qty transfer posted to other sales order

Hi All,
One sales order qty transfer posted to other sales order.How can I find this relation with table frields.
Please advise.
Pranitha.

Hi,
Check table MKPF and MSEG if transfer posting has been done with reference to a sales order.
Regards,
Amit

Batch quantity not deducting when FIRST date (for line item) is in future.

Hi Folks,
            My requirement is when creating sales order for batch managed materials, if i give any quantity with future date that is,
if todays date is 02.07.2010 and if i create sales order..
material    => mat1
Quantity   => 20
Date   => 12.07.2010     (this is not required delivery date,this is first delivery date in schedule line for that item)
Batch => B1
and initially if Batch B1 has quantity 100 ,after saving this sales order, the quantity must be 80.
but its not deducting, for future dates ,thats why the same batch is showing quantity 100, next time
when i m creating new sales order.where as it should show 80.
where exactly the quantity deduction is carried out (include or PAI PBO modules).
any hints.
I appreciate your response.
Thanks

Hi Folks,
            My requirement is when creating sales order for batch managed materials, if i give any quantity with future date that is,
if todays date is 02.07.2010 and if i create sales order..
material    => mat1
Quantity   => 20
Date   => 12.07.2010     (this is not required delivery date,this is first delivery date in schedule line for that item)
Batch => B1
and initially if Batch B1 has quantity 100 ,after saving this sales order, the quantity must be 80.
but its not deducting, for future dates ,thats why the same batch is showing quantity 100, next time
when i m creating new sales order.where as it should show 80.
where exactly the quantity deduction is carried out (include or PAI PBO modules).
any hints.
I appreciate your response.
Thanks

System should not allow to delete PO line Item after GR/IR

Hi,
I am working on a SAP Retail Implementation project.
Currently the system is allowing us to delete the PO line items after doing GR or IR against that PO line item. But the clients requirement is that the system should not allow to delete PO line item after doing GR/IR.
We are using Account Assignment Category-N, Item Category-S.
Please let me know if you have the solution for this requirement.
Thanks in advance
Thanks & Regards,
Suresh

Hi,
Standard SAP will not allowed the PO to be deleted once it was GR done. The controlled is on the attributes of message to set as "E"
Message no. 06115
But if invoiced takes place, the is the point that PO can be deleted.
You have to do have a Enhancement using MM06E005, insert you logic here to check PO history tables like EKBE, then check if invoice " Q" (BEWTP) exist, the PO cannot be deleted once the user delete the PO line and SAVE it. Ask you developer to help you on the following coding.
Use MM06E005 and EXIT_SAPMM06E_012
IF SY-TCODE = 'ME22N'.
IF sy-ucomm = 'MESAVE' OR SY-UCOMM = 'YES'..
LOOP AT TEKPO.
IF TEKPO-LOEKZ = 'L'.
SELECT SINGLE BELNR FROM EKBE INTO BELNR1 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'E'.
IF SY-SUBRC = 0.
SELECT SINGLE BELNR FROM EKBE INTO BELNR2 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'Q'.
IF SY-SUBRC = 0.
Regards,

Requirement : delivery Quantity should be same as Order Qty

The person entering the delivery qty shuold not be able to change the qty as entered in Sales order. how do we keep this control?

Dear Ms Naik,
Perhaps, it is currently beyond the scope of standard SD customising.
You may explore the following:-
Verify the delivery quantity during both creation and change, by comparing this with the order quantity, by using the user exit for delivery processing MV50AFZ1.
Preferably LFPMG is zero on saving.
It may be meaningful to consider the following addition setting for the order item category.
Set the completion rule to 'A' - mostly to safeguard an exploratory user from increasing the order quantity.
Trust this helps you.
Regards,
K Gopidas.

Production Order quantity should be same as Sale order line item qnty

Similar Messages

Maybe you are looking for