Production Planing Report query

Dear All,
Pls. Provide me production planing report query on this basis client purchase RM for production.
Best Regards

Hi Rashmi_BH
For Raw Material Planing you have to create Production Order on the base of Sales Order & Run MRP Wizard.
MRP Calculate Planing For Raw Material Automatically on the base of Production Order you have to make in SAP & also Consider In Stock Raw Material in Warehouse & also Comsider Purchase Order you have to make in SAP
For above Calculation MRP Wizard automatically create Purchase Order for not in stock in existing condition.
Thanks,
Srujal Patel

Similar Messages

Production Order Report - System Query

The Production Order Report in v2005A SP01 is not implemented in v2007A.
This report is important to some of our B1 user customers.
If the 2005A report is copied and pasted into the Query Generator in 2007A, it appears to work correctly, but the risk is that:-
(a) table changes which have been made have effects which aren't apparent on normal inspection, and
(b) it will eventually be lost during upgrades and users will have to recreate it themselves, for which many don't have the expertise.
Please verify that the functionality of the 2005A query remains correct in 2007A, and reinstate it as a system query in a future release.
Regards,
Mike Burmeister

Hi,
In SAP B1 2007A SP01 PL10, there is a change log. You can check all the differences made by user in the pass in the change log.
the table is AWOR. The product no. is taken from OITM. You can use both table in order to find out the comparison
JimM

Need to create report query to get latest open and last closed period for given application

Hi All,
I need to create a report query to get below result displayed in report output.
1)   -   Application name
2)   -    Ledger name
-o/ -Operating Unit
3)   - Last Closed Period
4)   - Current Open Period
5)   - Date Closed – Last Closed Period
6)   - Date Open – Current Open Period
I tr I tried to create the query below is the same. Please let me know if it looks fine.
SELECT *
FROM (SELECT fav.application_name ,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status ='C'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc )WHERE ROWNUM = 1
UNION ALL
SELECT *
FROM (SELECT fav.application_name Application_Name,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status = 'O'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc)
         WHERE ROWNUM = 1

It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
I'm just having a hard time pointing the link in the search results report to the document in the blob column.
The information on that page is great if you're trying to create a link to the document on the initial report.
But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
If you can help me with this I'd really appreciate it.
Thanks again.
Greg
Edited by: gjones77 on Dec 2, 2008 8:14 AM

Report Query wizard error (in Shared Components)

I have been following the <a target="_window" href="http://www.oracle.com/technology/products/database/application_express/howtos/howto_master_detail_pdf.html">How-To Create a Master-Detail PDF Report</a> 
 
I'm using Apex 3.01 and Firefox 2.0.0.7 
 
When I have to create a Report Query in the shared components, I get through the wizard to the Create Report Query Layout page and for some reason, the Previous and Next buttons don't work. The only button that works is the Cancel button. 
It seems to happen after I've downloaded the sample XML file from that page. 
I've also noticed this happens when you go in to edit an existing Report Query and take a download of the XML... 
On closer inspection it seems to be the buttons that have onclick="javascript:doSubmit..." behind them that don't work. Buttons with javascript:confirmDelete seem to still be active and work ok. 
 
But, the problem doesn't happen in IE7. 
 
I found this happened on both my local installation and on my apex.oracle.com instance. 
 
Has anyone else had this behavior or is this some dodgy local setting I have wrong? 
 
Gus.. 

Hi,
This is posted in the wrong forum. This forum is for Oracle Berkeley DB. Please find the correct forum and post your question there.
Regards,
Alex Gorrod,
Oracle Berkeley DB

Production rder report

Hi,
Is there a standard SAP production order report which can show me the following?
1) Material
2) Open production orders
3) Work centers they are currently at
4) Due date
5) Production order type
Thanks,
Sincerely,
Ketan

Hi Ketan,
As mentioned above, you need to use the report - COOIS.
To meet your exact need, define a selection profile in BS42. Give a name & click new, inside, select status REL, then add the following statuses & tick not active - LKD, TECO, DLV, DLT, DLFL.
Now select this profile in COOIS in Selection profile status. This would then list out only open production orders.
In the List drop down box, select the option PPIOA000 Object Overview, this option would list out header, operation & Component in the same screen.
You can then change the display for each of those, to display the values as desired by you.
Hope this answers your query, else revert.
If helpful award points
Regards,
Vivek
Is your query answered or any further issues?
Edited by: Vivek on Feb 6, 2009 3:56 PM

WSA - Report Query Failed

Hi all,
Recently, I'm receiving these two alerts from one WSA S370:
Report Query Failed
 query_id: wsa_monitor_overview_web_proxy_summary
 data_source: WSASimpleTotalRDS
 error: <type 'type'> ('egg/command_client.py send_message|555', "<class 'Commandment.DaemonUnresponsiveError'>", 'S370B.NAME.net: The daemon is not responding.', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|265] [reportdatasource/CounterReportDataSource.py _parse_overall_interval|581] [query/merged_result.py range|85] [query/client.py _call|235] [egg/command_client.py call|233] [egg/command_client.py send_message|555]')
AND
Report Query Failed
 query_id: wsa_monitor_overview_clients_by_blocked_transactions
 data_source: WSACommonRDS
 error: <type 'type'> ('egg/command_client.py call|238', "<class 'reporting.query.exceptions.DatabaseQueryFailure'>", '', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|251] [reportdatasource/CounterReportDataSource.py _run_api_query|482] [query/client.py time_merge_query|454] [query/client.py _call|235] [egg/command_client.py call|238]')
The code I'm using is 7.1.1-038
I started receiving the alerts only after upgrading to this code. Have you noticed something similar?
Thanks a lot for your help!!!
Fernando

Hello Everyone,
I am in Australia (Melbourne) and i am using ironport s160 web security appliance version: 7.1.2-80. Reecently i have started receiving the following warning from ironport proxy.
The Warning message is:
Report Query Failed
 query_id: wsa_monitor_overview_malware_categories
 data_source: WSACommonRDS
 error: ('egg/command_client.py send_message|555', "", 'proxymel3.sportsbet.com.au: The daemon is not responding.', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|265] [reportdatasource/CounterReportDataSource.py _parse_overall_interval|581] [query/merged_result.py range|85] [query/client.py _call|235] [egg/command_client.py call|233] [egg/command_client.py send_message|555]')
Report Query Failed
 query_id: wsa_monitor_overview_suspect_transactions_detected
 data_source: CounterReportDataSource
 error: ('egg/command_client.py send_message|555', "", 'proxymel3.sportsbet.com.au: The daemon is not responding.', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|272] [reportdatasource/CounterReportDataSource.py _parse_api_results|506] [reportdatasource/CounterReportDataSource.py _parse_interval_result_set|525] [query/result.py next|112] [query/client.py _call|235] [egg/command_client.py call|233] [egg/command_client.py send_message|555]')
Report Query Failed
 query_id: wsa_monitor_overview_suspect_transactions_summary
 data_source: WSASimpleTotalRDS
 error: ('egg/command_client.py send_message|555', "", 'proxymel3.sportsbet.com.au: The daemon is not responding.', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|265] [reportdatasource/CounterReportDataSource.py _parse_overall_interval|581] [query/merged_result.py range|85] [query/client.py _call|235] [egg/command_client.py call|233] [egg/command_client.py send_message|555]')
Report Query Failed
 query_id: wsa_monitor_overview_top_application_types
 data_source: CounterReportDataSource
 error: ('egg/command_client.py send_message|555', "", 'proxymel3.sportsbet.com.au: The daemon is not responding.', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|265] [reportdatasource/CounterReportDataSource.py _parse_overall_interval|581] [query/merged_result.py range|85] [query/client.py _call|235] [egg/command_client.py call|233] [egg/command_client.py send_message|555]')
Report Query Failed
 query_id: wsa_monitor_overview_top_url_categories
 data_source: CounterReportDataSource
 error: ('egg/command_client.py send_message|555', "", 'proxymel3.sportsbet.com.au: The daemon is not responding.', '[database/ReportCatalog.py run_report_queries|332] [reportdatasource/CounterReportDataSource.py query|265] [reportdatasource/CounterReportDataSource.py _parse_overall_interval|581] [query/merged_result.py range|85] [query/client.py _call|235] [egg/command_client.py call|233] [egg/command_client.py send_message|555]')
Product: IronPort S160 Web Security Appliance
Model: S160
Version: 7.1.2-080
Serial Number: 0025643CFD42-4GQYHL1
Timestamp: 14 Jun 2012 14:00:21 +1000
Thank you for your help.
Lovedeep

Recurring problem - need to touch report query to make page to work again

Hello
In my APEX 3.0 (Oracle 10.2.0.3.0) application I have a main menu which is a very simple page with one report that selects from a local table (no dblink) what pages the logged user has access to.
The problem is that now and then (around once a week) users get "page not found" after they log in to the application but before the main menu is displayed. After some testing I found out that, to fix it, I need to touch the report query (let's say, adding an extra space somewhere) and apply changes. After that, the page works fine...
I have other much more complex pages in the application that don't have such problem.
Any advice? Where should I start investigating to fix this?
Thanks
Luis
PS: From the error_log file:
[Mon Aug 20 10:12:54 2007] [error] [client 10.0.10.87] [ecid: 11877561:10.0.24.16:14092:0:37471,0] mod_plsql: /pls/apex/f HTTP-404 ORA-03113: end-of-file o
n communication channel\n
[Mon Aug 20 10:12:54 2007] [alert] [client 10.0.10.87] [ecid: 11877561:10.0.24.16:14092:0:37471,0] mod_plsql: Unable to reset state for mode 0: Err 3114 url=>/pls/apex/f

i have this exact same problem in our production environment
i really need help to fix it or we'll lose our major client
they're fed up with it
anyone?

Opportunity Product Revenue report using Narrative option

Hi,
I have created quote report using "Opportunity product revenue report" with the use of narrative option and its working fine but the problem here is if opportunity has multiple product revenue items it shows in multiple quotes. For me it should show in a same quotation if there are multiple opportunity product revenue items in a opportunity. Could anyone help me how can i achieve this.
Any help would be appreciated. Thanks in advance
Thanks & Regards
Ambarish

You need to modify report and club all revenue to single item / row.

Report-Query Value

Hi Experts,
Currently we are using one BW report in 3.5version(report query against multi provider).
Current issue:
Cube Fields:
PO Number: 123
Order value 100.
Confirmation value 50
Final Delivery Indicator: X (YES-No more confirmation is expected)
Calculation on the Query:
Outstanding Confirmed Value= Order Value - Net Confirmed Value
Here Outstanding Confirmed Value = 100-50=50.So in the reports, Outstanding Confirmed Value shows 50.
But the PO's Final Delivery Indicator is marked. So No more confirmation is expected
Question:
I am not able to create any formula against the filed Final Delivery Indicator. But i want to show in the report that if the PO's Final Delivery Indicator marked, then Outstanding Confirmed Value has to be 0(ZERO).
Please help me achieve this result. Thanks.
Advance Thanks.
RR.

Hi ,
This can be achived in the following way.
1. Create your formula
"Outstanding Confirmed Value= Order Value - Net Confirmed Value" and hide it using the property.
2. Create one more forumala which will check the condition. i.e. if the Final Delivery Indicator is marked then it will set the outstanding confirmed value as zero else it will show the value which we are getting by using above mentioned formula.
put the following condition in the formula.
[Final Delivery Indicator = = 0 ] * 0 + [Final Delivery Indicator <> 0]*Outstanding Confirmed Value
This will work as follow.
For example : Outstanding Confrimed Value is 50 and Final Delivery Indicator is marked.
= [ 0 == 0 ] * 0 + [ 0 <> 0 ] * 50
= 1* 0 + 0 * 50 " When the condition is satisfied its result is 1. here 0 == 0 condtion is satisfied so its return value is 1.
= 0
Hope this will help.
- Jaimin

Performance issues when creating a Report / Query in Discoverer

Hi forum,
Hope you are can help, it involves a performance issues when creating a Report / Query.
I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = Posted we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
Please see attached the SQL Inspector Plan:
Before Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
AND-EQUAL
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_N1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
After Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
TABLE ACCESS FULL GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
Many thanks,
Lance

Hi Rod,
I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
Ive been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
I think the problem is with the column using DECODE. When querying the column in TOAD the value of P is returned. But in discoverer the condition is done on the value Posted. Im not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
Lance
DECODE( JOURNAL_BATCH1.STATUS,
'+', 'Unable to validate or create CTA',
'+*', 'Was unable to validate or create CTA',
'-','Invalid or inactive rounding differences account in journal entry',
'-*', 'Modified invalid or inactive rounding differences account in journal entry',
'<', 'Showing sequence assignment failure',
'<*', 'Was showing sequence assignment failure',
'>', 'Showing cutoff rule violation',
'>*', 'Was showing cutoff rule violation',
'A', 'Journal batch failed funds reservation',
'A*', 'Journal batch previously failed funds reservation',
'AU', 'Showing batch with unopened period',
'B', 'Showing batch control total violation',
'B*', 'Was showing batch control total violation',
'BF', 'Showing batch with frozen or inactive budget',
'BU', 'Showing batch with unopened budget year',
'C', 'Showing unopened reporting period',
'C*', 'Was showing unopened reporting period',
'D', 'Selected for posting to an unopened period',
'D*', 'Was selected for posting to an unopened period',
'E', 'Showing no journal entries for this batch',
'E*', 'Was showing no journal entries for this batch',
'EU', 'Showing batch with unopened encumbrance year',
'F', 'Showing unopened reporting encumbrance year',
'F*', 'Was showing unopened reporting encumbrance year',
'G', 'Showing journal entry with invalid or inactive suspense account',
'G*', 'Was showing journal entry with invalid or inactive suspense account',
'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
'I', 'In the process of being posted',
'J', 'Showing journal control total violation',
'J*', 'Was showing journal control total violation',
'K', 'Showing unbalanced intercompany journal entry',
'K*', 'Was showing unbalanced intercompany journal entry',
'L', 'Showing unbalanced journal entry by account category',
'L*', 'Was showing unbalanced journal entry by account category',
'M', 'Showing multiple problems preventing posting of batch',
'M*', 'Was showing multiple problems preventing posting of batch',
'N', 'Journal produced error during intercompany balance processing',
'N*', 'Journal produced error during intercompany balance processing',
'O', 'Unable to convert amounts into reporting currency',
'O*', 'Was unable to convert amounts into reporting currency',
'P', 'Posted',
'Q', 'Showing untaxed journal entry',
'Q*', 'Was showing untaxed journal entry',
'R', 'Showing unbalanced encumbrance entry without reserve account',
'R*', 'Was showing unbalanced encumbrance entry without reserve account',
'S', 'Already selected for posting',
'T', 'Showing invalid period and conversion information for this batch',
'T*', 'Was showing invalid period and conversion information for this batch',
'U', 'Unposted',
'V', 'Journal batch is unapproved',
'V*', 'Journal batch was unapproved',
'W', 'Showing an encumbrance journal entry with no encumbrance type',
'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
'X', 'Showing an unbalanced journal entry but suspense not allowed',
'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
'Z', 'Showing invalid journal entry lines or no journal entry lines',
'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),

Report query with bind variable

Trying to create a report query for xsl-fo print. For output format I pick "derive from item" then pick the item name from the list, on the next screen, I paste the query with the bind variable. on the next step test query, I always get "data not found" regardless what value I type in. This is the same query that I ran under sql commands without any issues.
Does anyone run into the same issue as I have when attempted to create a query with bind var ? There is no problem creating a query without bind varibles. . thanks.
Munshar

Hi, please did you get any solution to this issue? I am having similar challenge right now.
select     EMP.DEPTNO as DEPTNO,
     DEPT.DNAME as DNAME,
     EMP.EMPNO as EMPNO,
     EMP.ENAME as ENAME,
     EMP.JOB as JOB,
     EMP.MGR as MGR,
     EMP.HIREDATE as HIREDATE,
     EMP.SAL as SAL
from     SCOTT.DEPT DEPT,
     SCOTT.EMP EMP
where EMP.DEPTNO=DEPT.DEPTNO
and      DEPT.DNAME =upper(:dname)
This run perfectly in sql developer, toad, and even inside publisher if I login directly to publisher to create report.
Generating this same query in shared component query builder and testing it returns no data found. If I remove the last line, it works. but with the last line, it return no data found. It seems no one has been able to provide solution to this issue

Performance problem with report query

Hi,
I am encountering a performance issue with a page returning a report.
I have a page that has a region which joins 2 tables. One table has about 220,00 rows, while the other contains roughly 60,000 rows. In the region source of the report region, the query includes join condition with local variables. For example, the page is page 70, and some join conditions are:
and a.id=:P70_ID
and a.name like :P70_NAME
I run the query that returns a large number of rows from sqlplus, and it takes less than 30 sec to complete.
When I run the page, the report took about 3 minutes to return.
In this case, :P70_NAME is initialized to '%' on the page.
I then tried to substitute variable value directly in the query:
and a.id=1000
and a.name like '%'
this time the report returned in about 30 sec.
I then tried another thing which specified the region as "PL/SQL Function returning sql query", and modified the region as follows:
l_sql := '.......';
l_sql := l_sql || 'and a.id=' || v('P70_ID')
and similar substituting :P70_NAME to v('P70_NAME') and append its value to the l_sql string.
The report query page also returned in 30 sec.
Is there any known performance issue with using the bind variable (:PXX_XXX) in the report region?

If you are able.. flush the shared_pool, run your
report then query the v$sql_area or v$sql_text tables.
Or do a google query and look up Cary Milsap's piece on enabling extended trace .. there is your sure fire way of finding the problem sql. I am still learning htmldb but is there a way to alter session enable trace in some pre-query block?

Creating a print button to call a Report Query and pass filters

If i use the REPORT QUERY option in APEX 4 to create an statement that is the same one used in an interactive report, can I create a link or button to the REPORT QUERY and pass all the session and filter information from the interactive report to the report query?
This way I can have the interactive report screen where the user can do all sorts of modifications and such and then pass those to the REPORT QUERY so I can call that from a custom link or button.
You may ask "why does he need another print button?"
Answer: I am using a view that has some embedded HTML tags to format the output really nicely. The HTML download version created by the interactive reports works beautifully. The customer also wants a PDF version (meh) which does not render the HTML tags and actually echos them as part of the text. I found that I can create another view that uses the CHR function to create all the breaks and such I was doing with HTML and these do render properly in PDF. So, I figured just have 2 reports: 1 Interactive and 1 using a REPORT QUERY. I just want to call the REPORT QUERY version but use the Interactive Search form to set all the parameters.
Or, am I over thinking this and there is an easier method?
I made a previous post where I showed how I got the APEX printing to work and i hoped that helped someone out - fixing this issue would put the whole thing to rest.
Thanks

Is BI Publisher desktop (MS Word add-in) a possibility? This would allow you to use MS Word to create your output template (RTF) that would result in a properly formatted PDF. Of course, you'd have to right an updated version of the query without HTML embedded. Just thinking outside of the box.

Bind Variables and Shared Component Report Query

I have a query in a region report which I have replicated to a shared component report query.
Both queries reference page items as bind variables in the where clause.
The report region on screen shows the correct results but the report query shows "no data". This is the case when running "Test Query" and "Download XML data" from the shared component report query definition. If I hardcode the variable names I get rows returned, If I use bind variables - and specify the values for these variables I get no data. THe XML file contains the tags for each bind variable I have specified but has no data between the tags. I have Ticked the box to include application and session state but it appears that the bind variables are not being used.
When I use my report query in the application (URL tied to a button) I get the same problem, the binds are not being passed to the report query.
Can someone please clarify if this is a bug or not? And if not, how can I get it to work.
I am using Apex 4.0.2
Thanks
Kathryn

Hi
To confirm, yes I selected the bind variables. I used these in the report layout, but the xml file has them as empty i.e.
<P0_START_DATE><P0_START_DATE/> with nothing in between.
IN the Test Query section, if I put real values in the boxes for the bind variables, I get no data found. If I hardcode the values into the query, I get the data.
I've repeated the create report query many times and have created a report layout in RTF. I can use the layout with my region - in the print attributes and the layout works with the query but I need to create a PDF using 2 queries - ROWSET1 and ROWSET2. I can generate the XML but the values in the rows are all empty. When I use the layout with a report query instead of the region, I get no data even though I have used the same sql and have selected the bind variables. I was using variables from page items on page zero but have also tried using page items on the current page, the result is the same.
I need to use a report query and a report layout as I need data from 2 queries in the PDF.
I looked at your demo - what happens if you add a second sql query to the report query - is there any chance I can look at the back end (developer access?)
Thanks for your input
Kathryn

Ora-06502 pl/sql numeric or value error in Report Query in oracle apex

Hello all,
I need your help...
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I am using bi publisher to generate PDF reports in oracle apex.
We were using APEX 4.0 and migrated to 4.2 just a week ago.
Now we have apex 4.2.
When I try to Create report query,
Shared Components >> Report Queries then create.
and test a report in a create wizard I am getting a error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small".
I have also applied a patch "16760897".
This issue is because of number of columns in a query is more then 26.
If I run a report with 26 or less number of columns then the is working fine, otherwise getting this error.
My before migration report queries working perfectly even now, but not new queries.
This issue is also in apex.oracle.com.
You can see
Not working - http://apex.oracle.com/pls/apex/f?p=619:4
Working - http://apex.oracle.com/pls/apex/f?p=619:2:
Please give a solution.
Thanks you.

check the DB version compatibility with apex 4 or your DB version to apex 4.0 support for upgrade!
Oracle Application Express Installation Requirements for 4.0

Production Planing Report query

Similar Messages

Maybe you are looking for