Production Server is Clustering environment..

Dear Sap Gurus,
*The Production Server is in Clustering environment, so the scenario is:-- *
PRD1 =  Server1 (say ip= 192.13.12.10)
PRD2 = Server2 (say ip = 192.13.12.11)
PRD = To create join b/w the two Application Servers
Now I have created a Report which gets downloaded(same path given in both PRD1 and PRD2) in the Application Server...
Now while searching for the file path, due to clustering enviroment sometimes SYSTEM creates the file in PRD1(IP = 192.13.12.10) and sometimes in PRD2( IP=192.13.12.11).....(Randomly).....
For Example: (say) A file named "abc.xls" has been created in PRD1.
Main Problem which I am facing is while downloading this file to my Desktop.....
I am using the Transaction CG3Y for it and when I'm providing the filename(with path) in the Source it says "file not found"....
I guess the reason for this is that CG3y transaction is hitting the PRD2 Server where file does not exists.So kindly guide so that I am able to download the file to my Desktop......
Pls guide......
Thanks and Regards,
Abhishek Banerjee

Try to map the drives with NFS. Might resolve the issue.
Regards
Parag

Similar Messages

  • Admin server in clustered environment

    Hi,
    In OBIEE 11g Clustered environment, we will have admin server and multiple managed servers(say 2) and OBIEE components running on both machines(some are active-active and some are active-passive). So if i have 2 servers say A and B, Do i need to start the Admin servers on both the machines or just on primary server A?
    If not then primary server will have 1 Admin server and 1 managed server along with OBIEE components and secondary server will have managed server and OBIEE components right?
    Thanks,
    RM

    The managed services will continue to run while trying to connect with the admin server. Hence if Admin Server A goes down, it does not mean the managed services will not continue to function.
    Link: http://docs.oracle.com/cd/E14571_01/web.1111/e13716/understand_domains.htm
    Look for "what happens when if the Administration Server fails?"
    I will have to get back on if Admin Server B needs to be manually started up or if it can be automated as part of HA.
    I know the managed server can also be configured such that it can function as the Admin server. I have found a similar discussion on the followin thread surrounding 11.1.1.5: obiee 11g enterprise deployment
    Mark if helps.

  • Getting error while starting Managed server in clustered environment

    Hi All,
    I created a cluster in weblogic 9.2 and two manged servers under that cluster through WLST scripts.
    I started Node manager through connecting WLST and now when i am starting the managed servers its giving the following error :
    wls:/Dist_3/serverConfig> start('managed1','Server')
    Starting server managed1 ....NMProcess: <Jan 30, 2009 2:57:27 PM> <Warning> <I/O
    error while reading domain directory: java.io.FileNotFoundException: Domain dir
    ectory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)>
    NMProcess: java.io.FileNotFoundException: Domain directory 'C:\bea\weblogic92\co
    mmon\bin' invalid (domain salt file not found)
    NMProcess: at weblogic.nodemanager.server.DomainManager.initialize(DomainMa
    nager.java:80)
    NMProcess: at weblogic.nodemanager.server.DomainManager.<init>(DomainManage
    r.java:52)
    NMProcess: at weblogic.nodemanager.server.NMServer.getDomainManager(NMServe
    r.java:242)
    NMProcess: at weblogic.nodemanager.server.Handler.handleDomain(Handler.java
    :212)
    NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.jav
    a:105)
    NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:66)
    NMProcess: at java.lang.Thread.run(Thread.java:595)
    NMProcess:
    I/O error while reading domain directory: java.io.FileNotFoundException: Domain
    directory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)
    Traceback (innermost last):
    File "<console>", line 1, in ?
    File "<iostream>", line 1250, in start
    WLSTException: 'Error occured while performing start : Error starting the server
    Error occured while performing start : Server with name managed1 failed to be st
    arted Use dumpStack() to view the full stacktrace'
    wls:/Dist_3/serverConfig> start('managed2','Server')
    Starting server managed2 ....NMProcess: <Jan 30, 2009 3:05:51 PM> <Warning> <I/O
    error while reading domain directory: java.io.FileNotFoundException: Domain dir
    ectory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)>
    NMProcess: java.io.FileNotFoundException: Domain directory 'C:\bea\weblogic92\co
    mmon\bin' invalid (domain salt file not found)
    NMProcess: at weblogic.nodemanager.server.DomainManager.initialize(DomainMa
    nager.java:80)
    NMProcess: at weblogic.nodemanager.server.DomainManager.<init>(DomainManage
    r.java:52)
    NMProcess: at weblogic.nodemanager.server.NMServer.getDomainManager(NMServe
    r.java:242)
    NMProcess: at weblogic.nodemanager.server.Handler.handleDomain(Handler.java
    :212)
    NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.jav
    a:105)
    NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:66)
    NMProcess: at java.lang.Thread.run(Thread.java:595)
    NMProcess:
    I/O error while reading domain directory: java.io.FileNotFoundException: Domain
    directory 'C:\bea\weblogic92\common\bin' invalid (domain salt file not found)
    Traceback (innermost last):
    File "<console>", line 1, in ?
    File "<iostream>", line 1250, in start
    WLSTException: 'Error occured while performing start : Error starting the server
    Error occured while performing start : Server with name managed2 failed to be st
    arted Use dumpStack() to view the full stacktrace'
    wls:/Dist_3/serverConfig>

    hi kartheek,
    i think u just missed some of steps while starting managed server using nodemanager in WLST.
    If u dont mind i'm sending some of steps just check it out. Once u try the same steps.
    1.start the ADMIN SERVER
    2.start the WLST
    java weblogic.WLST
    3.Connect to AdminServer
    connect('username',password','t3://adminhost:listenport')
    example: connect('weblogic','weblogic','t3://localhost:7001')
    4.start the nodemanager in WLST
    startNodeManager()
    5.connect to nodemanager
    nmConnect('username','password','nodemanagerhost',
    'nodemanagerlistenport','domainname','path to domain')
    example: nmConnect('weblogic','weblogic','localhost','5556','base_domain'
    'C:/bea/user_projects/domains/base_domain')
    6.start the managed server in WLST
    start('managedservername','Type','t3://managedhost:listenport')
    example:start('man1','Server','t3://localhost:7003')
    7.If u want to start cluster in WLST
    start('clustername','Type')
    example: start('cluster1','Cluster')
    If u want to start managed in Cluster u follow STEP-6 only
    regards
    abhi

  • MSTDC Error in clustered Environment in while interacting to DB Server from BizTalk server

    Hi All,
    After completing all my required Biz-talk Integrations (All were related to WCF-Custom Adapter : SQL Binding), I deployed the same to the client environment. But, the same thing which worked for me in my development environment was giving some issues in
    the deployed environment.
    The main difference was, at client environment - The DB Server was clustered environment and the interaction was through the load balancer.
    The first issue I encountered was, there was firewall blocking the access to the DB server from Biz Talk server. Then after enabling and opening the Port 1433, the issue got fixed and I was able to communicate with the DB Server.
    After this, I was getting the error related to MSTDC. For this to work properly, in my BizTalk application Configuration, if i set the property for "UseAmbientTransaction" as false under "SqlBinding" for the WCF-Custom Send Port, it is
    working as expected!
    But, I heard from our Architects that the best approach is to set the property as "TRUE" for "UseAmbientTransaction" property.
    So I set the property as true and done the below configurations.
    1. Enabling Network DTC using "dcomcnfg.exe"
    2. Adding and enabling Fire wall exception for DTC.
    Even after making the above changes, I was getting the same error. Then after cross checking with DTCPing and DCTester on both local and deployed copy, i got the below difference.
    1. Port 135 (RPC EPM) was opened in my local environment but it was having "Filtered" access at the deployed copy.
    So my question is, after opening the above port, will it solve the issue?
    Secondly, is there any security threat ter opening the above Port?
    Any quick suggestion/solution is highly appreciated.
    Thanks in Advance,
    Anand

    Hi Anand,
    Performing operations on SQL Server using BizTalk Server always involves two resources—the adapter connecting to SQL Server and the BizTalk Message Box residing on SQL Server. Hence, all operations performed using BizTalk Server are performed within the
    scope of an MSDTC transaction. So, to use the SQL adapter with BizTalk Server, you must always enable MSDTC. To enable the adapter to perform operations within the scope of an MSDTC transaction, you must configure MSDTC both on the computer running the SQL
    adapter and SQL Server. Also, you must add MSDTC to the exceptions list of Windows Firewall. That is the reason why recommend setting for this binding property is
    true; otherwise you might either experience message loss or duplicate messages, depending on whether you are performing inbound or outbound operations.
    Exception is for operations where the adapter client does not write any data to the SQL Server database, such as a Select operation, you might not want the additional overhead of performing the operations inside a transaction. In such cases,
    you can configure the SQL adapter to perform operations without a transactional context by setting the
    UseAmbientTransaction binding property to false.
    Just refer the link fo all the details:
    Configure MSDTC on SQL Server and Adapter Client
    Rachit
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Migration from Clustered environment to VM

    SQL instance : 2008 R2
    Problem:  We are planning to migrate our sql server from clustered environment to VM.  There are several SQL instances on that cluster.
    Are there any instructions/tools available to migrate those instances from cluster to a VM?
    Thanks.

    Hi,
    It would be better to start migration from scratch. Build a new VM and configure windows cluster on it. Then install SQL Server cluster and migrate database using backup and restore method. Move logins and jobs by scripting it out
    https://communities.vmware.com/message/2461704
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Error in Server log of one of the server  on the clustered environment(OBI)

    Hi
    We had setup Clustered Environment and when we are trying to log in on to the Primary Server which is also Primary Controller, everything is fine on front end but we had faced the following error in the server log as follows : "[46036] Internal Assertion: Condition m_hFile != hFileNull, file .\Src\mfcfile.cpp, line 447."
    Please provide help by letting me know what this error mean and how can we avoid this error.

    What happens if you disable your master BI server, do you get the error in the other BI Server log when you login to Presentation Services?
    The message is an internal error, you need to raise an SR with Oracle to determine why it's happening and how to prevent it.

  • Common reason for Mirage Server Failure in Clustered Environment and how clients will be switched to other server in a cluster

    Hi,
    Can Anybody share me the information regarding Common reason for Mirage Server Failure in Clustered Environment.
    And how clients will be switched to other server in a cluster to continue their operations from the failed server.
    Regards,
    Bathesha C

    Hello,
    if you have more than one mirage server configured with Load balancing (LB or MSFTNLB) the client would disconnect from the faulting server and then reconnect to an other server to progress with the action as before.
    All Mirage server are stateless and share the same SIS (single instance store) so any server can update or create CVD file set for an client.
    Hope that helps.

  • Get a list of users logged on each server node in a clustered environment

    Hi,
    does anybody know if there is way to get a list of users which are logged on each server node in a clustered environment. Or maybe is there api for that so I could write an application which does that?
    Regards
    Ladislav

    Hi,
    about the code I was looking at - easily you can find out that these iviews are components of <b>com.sap.portal.admin.monitor.par</b>. The thread Thread Overview is implemented by: <i>com.sapportals.portal.admin.psm.PortalServerMonitor</i>. In <i>getThreadsData</i> method there is a parameter <b>portalMonitor</b> so it led me to this code in <i>doContent</i>:
    /* 143*/          IPortalMonitor portalMonitor = (IPortalMonitor)PortalRuntime.getRuntimeResources().getService("com.sap.portal.runtime.application.monitor.PortalMonitor");
    /* 144*/          IPSMData psmData = portalMonitor.getIPSMDataInstance();
    So I have found <i>com.sap.portal.runtime.application.monitor.par</i> and there is a service implemented by <i>com.sapportals.portal.prt.service.monitor.PortalMonitor</i> where is <i>com.sapportals.portal.prt.service.monitor.MonitorCommunication</i>. And this is a service which calls all the nodes in the cluster around asking for info about the threads, requests, ... Here is a method <i>getMonitoringData</i> which works with object <i>com.sapportals.portal.prt.service.monitor.MonitorData</i>. Here in method <i>getThreadOverview</i>:
    /* 396*/          ApplThreadOverview oATOs[] = OverviewMonitor.getApplThreads();
    So in this <i>OverviewMonitor</i> the method <i>getApplThreads</i>:
                 public static ApplThreadOverview[] getApplThreads()
    /*  50*/          return ApplThreadMonitor.getApplThreads(false);
    from here:
    /* 130*/          ApplThreadMonitor hlpAppl = TaskMonitor.getApplThreadList();
    and this <i>ApplThreadMonitor</i> has:
                 private String userName;
                 private String reqName;
                 private String taskName;
                 private String compName;
                 private String action;
    So if you can get this (when the most of the classes mentioned is not in API but CORE part) on each node and ask for it from one place you got the user list at cluster nodes...
    In fact there can be a shortcut to get this info, I have found this ;o)
    Romano
    PS: and thanks for the stars!

  • AIA FP 2.4 on SOA suit 10.3.1.4 clustered environment

    Hi
    I am trying to install the FP on top of my SOA 10.1.3.4 MLR5. This is a clustered environment.
    As described, one should install the FP with ant on the admin member, with ant --noconfig FPInstall.xml
    But it keeps failng at deploy AIAReadJMSNotificationProcess with ORABPEL-12529
    It says it misses some adapters :
    AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
    The Resource Adapter  was unable to activate the endpoint :{} due to the following reason: ORABPEL-12529
    ManagedConnectionFactory problem.
    Could not instantiate ManagedConnectionFactory oracle.tip.adapter.jms.JmsManagedConnectionFactory due to:
    Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
    Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
    Loader: oracle.bpel.common:10.1.3
    Code-Source: /opt/oracle/product/10.1.3/assoa/bpel/lib/orabpel.jar
    Configuration: <code-source> in /opt/oracle/product/10.1.3/assoa/j2ee/oc4j_soa/config/server.xml
    This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
    The missing class is not available from any code-source or loader in the system.
    Please make sure the corresponding JCA Resource Adapter has been deployed.
    Please correct the reported issue and redeploy the BPEL process.
    These adapters are installed in the oc4j_esbdt as the install guide on soa clustering describes, and I think the deployment expects it to be in the oc4j_soa. Am I right? Does anyone know how to overcome these issues?
    kind regrds
    Michel

    Hi Michel,
    I found the solution myself
    Just manually deploy the adapters in oc4j_soa the same as in oc4j_esbdt, now deployment goes ok.
    Please excuse my ignorance. How do you manually deploy the adapters as mentioned above? Please give the details.
    Thanks,
    Amorsolo

  • Anyone know how Delta Links are stored in a Clustered environment?

    We have a situation where we have a clustered EP6 production environment with 4 servers in the load balancer.
    However, we've found that on just one of the servers the Delta Link between one of our roles and its only workset is missing.
    Wanted to know if anyone could explain how these delta links are stored and/or what happens during transport import in a clustered environment (e.g. are components deployed only to the central database or deployed to each server in the cluster)?
    Thanks for any help/advice on this you can provide.

    Hi Steve,
    The delta links are stored in the PCD which is common for all nodes in the cluster (there is only one database).
    When importing portal content to a cluster it is stored in two locations: one in on the central instance and the other one is locally on the specific node to which it was imported.
    All other nodes are informed that there is a new content but will only upload it locally on demand (only when a user is calling this content).
    Please award points if you find this answer helpful.
    Regards,
    Amit.

  • ECP PRODUCTION SERVER IS DOWN

    Hi,
    Our ECP PRODUCTION CI INSTANCE is down. I can't even see the instance
    in the MMC console. I no longer see the SAPECP_02 service in
    services.msc. Please advise and have a look at the system. I am opening
    up all connection including terminal services. Please have a look at
    it. Please note that this is a clustered environment and the database
    is up and running on the database server.

    Hi,
    Also check with your cluster groups wheather its online or not.
    Try on another node if service is  available.
    To register the service manualy this link will help
    http://help.sap.com/saphelp_sm32/helpdata/EN/58/7d8f671e0fa54db744991e200f9111/content.htm
    Regards,

  • JMS in Clustered Environment

    Hi All,
    We have a clustered environment ; instance A and B of the same application server is running. Both the servers are configured for a JMS queue. But when I send message to the queue to refreh certain data, only one server is getting refreshed.
    What can I do for this? Please suggest?
    Regards
    Sajitha

    Hi,
    You should tell us which product you are using. However, I think that you should use a topic rather than a queue because a message that is sent to a clustered queue will be delivered to only one MDB instance.
    Hope it helps
    Arnaud
    www.arjuna.com

  • Issue in Synchronous File Read in clustered environment

    Hi,
    We are using clustered environment (4 managed servers) in Unix. In a OSB 11gR3 proxy service we are using Synchronous File Read. Randomly we are getting the below error. Let us know what could cause the issue. But the same code is working fine in a single stand-alone server configuration.
    Error Code : BEA-380002 , Error Reason : Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderNamer/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
    at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:598)
    at sun.reflect.GeneratedMethodAccessor1115.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
    at $Proxy142.sendMessageAsync(Unknown Source)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:670)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatchSync(PipelineContextImpl.java:551)
    at stages.transform.runtime.WsCalloutRuntimeStep$WsCalloutDispatcher.dispatch(WsCalloutRuntimeStep.java:1391)
    at stages.transform.runtime.WsCalloutRuntimeStep.processMessage(WsCalloutRuntimeStep.java:236)
    at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
    at com.bea.wli.sb.stages.impl.SequenceRuntimeStep.processMessage(SequenceRuntimeStep.java:33)
    at com.bea.wli.sb.pipeline.PipelineStage.processMessage(PipelineStage.java:84)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:1055)
    at com.bea.wli.sb.pipeline.Pipeline.processMessage(Pipeline.java:141)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:1055)
    at com.bea.wli.sb.pipeline.PipelineNode.doRequest(PipelineNode.java:55)
    at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
    at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:1055)
    at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
    at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:96)
    at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:593)
    at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
    at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
    at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
    at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl$4.run(JCATransportInboundOperationBindingServiceImpl.java:415)
    at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl$4.run(JCATransportInboundOperationBindingServiceImpl.java:413)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.security.Security.runAs(Security.java:61)
    at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.sendMessage(JCATransportInboundOperationBindingServiceImpl.java:413)
    at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.invokeOneWay(JCATransportInboundOperationBindingServiceImpl.java:126)
    at com.bea.wli.sb.transports.jca.binding.JCAInboundRequestListener.post(JCAInboundRequestListener.java:39)
    at oracle.tip.adapter.sa.impl.inbound.JCAInboundListenerImpl.onMessage(JCAInboundListenerImpl.java:170)
    at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:502)
    at oracle.tip.adapter.file.inbound.Publisher.onMessageDelegate(Publisher.java:493)
    at oracle.tip.adapter.file.inbound.Publisher.publishMessage(Publisher.java:419)
    at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.xlate(InboundTranslatorDelegate.java:484)
    at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.doXlate(InboundTranslatorDelegate.java:121)
    at oracle.tip.adapter.file.inbound.ProcessorDelegate.doXlate(ProcessorDelegate.java:388)
    at oracle.tip.adapter.file.inbound.ProcessorDelegate.process(ProcessorDelegate.java:174)
    at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:349)
    at weblogic.work.ContextWrap.run(ContextWrap.java:41)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:259)
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
    ... 56 more
    Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/wsdlPathAndName [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:662)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:353)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:312)
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:350)
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:253)
    ... 57 more
    Caused by: BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File /root/oracle/domains/osb/11.1.1.4/cluster/data/osb2/FolderName/Filename.txt to be processed was not found or not available or has no content Please make sure that the file exists in the specified directory.
    at oracle.tip.adapter.file.outbound.FileReader.readFile(FileReader.java:277)
    at oracle.tip.adapter.file.outbound.FileReader.executeFileRead(FileReader.java:181)
    at oracle.tip.adapter.file.outbound.FileInteraction.executeFileRead(FileInteraction.java:331)
    at oracle.tip.adapter.file.outbound.FileInteraction.execute(FileInteraction.java:395)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:529)
    ... 61 more
    Edited by: 842347 on Jul 6, 2011 3:11 AM

    I face the same issue and I have given all permissions to the folder for OS user.
    Because of this error my server is not starting up . Is there any way I can undeploy this composite to get my server running.
    I cant do this from EM because SOA server is failing to start up.
    I have tried removing it from $DOMAIN_HOME/deployed-composites but still when i try restarting the soa server the composite comes up there. Do we need to delete the entry some where else too. Kindly help.
    Thanks,
    Sri.

  • Upgrade 10G to 11.1.1.5 in Clustered environment

    I successfully ran the upgrade assistant on a single server install. Both RPD and Catalog upgraded with no issues. I scaled out to a 2 node cluster and attempted the upgrade with the assistant again. This time it fails. Here is log entries:
    [2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Starting to upgrade components.
    [2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Retain Source Ports: false
    [2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Stop 10g Components: false
    [2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Start 11g Components: false
    [2011-07-20T15:16:07.876-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Managed server bi_server2 state is: RUNNING
    [2011-07-20T15:16:07.876-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Starting to upgrade BIEE.
    [2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] upgrade exception occurred
    [2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [upgrade.Framework] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
    [2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [upgrade.Framework] UPGCMP-02712: Expected oracle.biee.admin:oracleInstance=*,type=BIDomain.OracleInstance,group=Service Oracle instance, found 2
    [2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [upgrade.Framework] UPGCMP-02712: Expected oracle.biee.admin:oracleInstance=*,type=BIDomain.OracleInstance,group=Service Oracle instance, found 2
    [2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Finished upgrading BIEE with status: Failure.
    [2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Finished upgrading components.
    [2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] 0 components upgraded with success.
    [2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] 1 components upgraded with failure.
    Question….can you use upgrade assistant in clustered environment?
    Thanks!

    You can only use the upgrade assistant to upgrade to a single instance Oracle BI 11g server. Typically this is a sandbox server environment or a VM that can simply be wiped clean after the upgrade. Then move the RPD,WebCat, etc. and AppRoles that get created during the upgrade process to a development server. The UA is looking for a single instance installation environment and that environment should be clean/fresh to avoid confusion and conflicts.
    Please award points if helpful.

  • Jms is not working properly in clustered environment

    Hi all,
    i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
    we are using the jndi.properties as follows ...
    java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
    java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
    java.naming.security.principal=oc4juser
    java.naming.security.credentials=oc4juser
    oracle.j2ee.rmi.loadBalance=lookup
    we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
    i have seen that for every instance there one jms server. at runtime it is taking one application servers services
    say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
    here jms is not working properly when i send message
    As we have clustered environment message must be propagated all the applications who use above jndi.properties.
    if i keep use only one application server opmn say
    java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
    then its is working excellently
    please can u provide any solution ASAP
    thanks in advance
    Manu

    Dear Aravindth
      (.*?) means -> Select all contents from where you start and end,
    For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
    (?) Match zero or one occurrences. Equivalent to {0,1}.
    (*) Match zero or more occurrences. Equivalent to {0,}.
    (+) Match one or more occurrences. Equivalent to {1,}.
    (.) (Dot). Match any character except newline or another Unicode line terminator.
    (.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
    Could you please refere the below cite :
    http://www.javascriptkit.com/jsref/regexp.shtml
    Thanks & Regards
    T.R.Harihara SudhaN

Maybe you are looking for

  • How can I move an ArrayList from one method to another?

    As the subject reveals, I want to know how I move an ArrayList. In one method, I fill my ArrayList with objects, and in the next I want to pick an arbitrary object out of the ArrayList. How do I make this work??

  • Can't fix fglrx/Xorg black screen issue, no matter what I try!

    I've tried everything that I can think of or find online to fix this. Please help. I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx

  • Pdf preview tiles

    I have noticed that some Windows computers show preview tiles instead of a standard file list.  Specifically, on one Windows 7 32 bit Home Premium SP1 computer, when choosing "large" as a list choice, it shows preview tiles of the first page of the .

  • Does reconstruction work for initializations?

    Hai,         I have a initlization done for a ODS and now I want to delete the data in it for some reason and then reload data into it.Can I just delete the request and then after my changes, can I reconstruct and still the delta works? I mean withou

  • Stagger batch sequence

    I am using Teststand 3 - with batch sequence (single pass) and LabVIEW 7. CYC1 CYC2 CYC3 CYC4 CYC5 CYC6 CYC7 CYC8 UUT1 UUT2 UUT1 UUT3 UUT2 UUT1 UUT4 UUT3 UUT2 UUT1 UUT4 UUT3 UUT2 UUT1 UUT4 UUT3 UUT2 UUT1 UUT4 UUT3 UUT2 UUT1 UUT4 UUT3 UUT2 UUT1 UUT4 U