Profile doesn't stick to user

Hi there,
I have issue with profiles not applying although explicitly set.
# select profile from dba_users where username='MY_USER';
PROFILE
0 rows selected
# alter user MY_USER profile default;
0 rows selected
alter user MY_USER succeeded
# select profile from dba_users where username='MY_USER";
PROFILE
0 rows selected
If i browse user through EM it actually have profile listed in user properties, but it doesn't apply in reality.
Any idea?
Oracle 10.2.0.4 i386 - Linux

Justin Cave wrote:
Hans-
But if the username is case sensitive, the ALTER USER statement at the SQL*Plus prompt would fail unless the user name was in double quotes.
Yes. I was specifically looking at the EM case which OP says is also used. (The # as the SQLPlus prompt keeps throwing me off ... my brain is wired to disallow/block anything non-nix-admin run by root :-) )
The one thing that does come to mind is the idea that EM and SQLPlus are pointing at different databases. Does not account for the alter working but not showing info - after verifying the database instance is the one I want I still say a complete dump into a file and hex-inspect the info would be my next step.
(Unless database vault, or some other VPN security has been enabled.)
# alter user MY_USER profile default;
0 rows selected
alter user MY_USER succeededAlso note that I've never seen an 'alter user' return 'rows selected' response. The usual SQLPlus response is 'User altered'. ... possibly some kind of additional shell-based processor?
Edited by: Hans Forbrich on Nov 13, 2009 8:22 PM

Similar Messages

  • GPO to prevent users from accessing the root folder of their profile doesn't work

    Hi,
    Here's the scenario:
    In a Windows 2012 RDS I created two groups called RemoteApp users and remote desktop users.
    These groups are defined in the collection for the corresponding RD Session hosts.
    These groups are not included in any other group, but they are located under an OU -called  Remote Users.
    In the domain controller I have created a GPO named "Restrict access to root drive"  which is linked to the Remote Users OU.
    The GPO I selected is - "Prevent users from adding files to the root of their users files folder"
    This doesn't seem to work. I have waited more than a few hours to allow the 90 minutes update, plus used the gpupdate /force
    but when a user clicks on the RemoteApp (Excel in this example) then access to the C: drive (which is the root folder of the user's profile) is enabled, and the user can create folders and save files under C:.
    I tried to run gpresult for the specific user but the GPO I created wasn't mentioned.
    I thought this would be a straight forward mechanism, but somehow it looks like something is missing.
    I have read about loopback and expanding, but not sure if this is what needs to be done, and if yes - I'd appreciate if I can get  step by step instructions. Everything I found so far was VERY vague.
    Thanks !
    One more detail that may be relevant - the DC is a Windows Server 2012, and the session host is a Windows 2012 R2.

    > These groups are not included in any other group, but they are located
    > under an OU -called  Remote Users.
    >
    > In the domain controller I have created a GPO named "Restrict access to
    > root drive"  which is linked to the Remote Users OU.
    >
    The USER accounts need to be in the OU your GPO is linked to. Despite
    their name, GPOs do NOT apply to groups, but to users (and computers).
    Groups only provide an additional layer of filtering...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Jdev11g CPU profile and Memory Profile doesn't work for Mac

    I'm running Jdev11g on Mac OSX 10.5.5,
    CPU Profile and Memory Profile doesn't work. I got following message:
    Error occurred during initialization of VM
    Could not find agent library in absolute path: /Shared/jdevjavabase11110/jdeveloper/jdev/lib/profiler16.so
    The file actually is there. I don't understand why they looking for .so file, it supposed to be mapped as .jnilib on Mac.
    This is broken on TP4 as well.

    I'm still seeing this issue. Here is what I get:
    /System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java -client "-agentpath:/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so=port=60950,jarpath=/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler-agent.jar,enable=t,depth=1000,startup=connect,time" -classpath /Users/kamleshnanda/jdeveloper/mywork/MyJavaApplication/Project1/classes project1.Class1 Hello
    Error occurred during initialization of VM
    Could not find agent library in absolute path: /Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so
    Process exited with exit code 1.
    I'm using the following build:
    About
    Oracle JDeveloper 11g Release 1 11.1.1.2.0
    Java Edition Version 11.1.1.2.0
    Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
    Copyright © 1997, 2009 Oracle and/or its affiliates. All rights reserved.
    IDE Version: 11.1.1.2.36.55.36
    Product ID: oracle.jdeveloper
    Product Version: 11.1.1.2.36.55.36
    Version
    Component     Version
    =========     =======
    CVS Version (External)     (CVS) 1.12.13 (client/server)
    Java(TM) Platform     1.6.0_17
    Oracle IDE     11.1.1.2.36.55.36
    PMD     JDeveloper Extension 4.2.5.3.0
    Team Productivity Center     11.1.1.2.36.55.36
    Versioning Support     11.1.1.2.36.55.36
    Here are the JVM properties:
    java.runtime.name     Java(TM) SE Runtime Environment
    java.runtime.version     1.6.0_17-b04-248-10M3025
    java.specification.name     Java Platform API Specification
    java.specification.vendor     Sun Microsystems Inc.
    java.specification.version     1.6
    java.vendor     Apple Inc.
    java.vendor.url     http://www.apple.com/
    java.vendor.url.bug     http://bugreport.apple.com/
    java.version     1.6.0_17
    java.vm.info     mixed mode
    java.vm.name     Java HotSpot(TM) 64-Bit Server VM
    java.vm.specification.name     Java Virtual Machine Specification
    java.vm.specification.vendor     Sun Microsystems Inc.
    java.vm.specification.version     1.0
    java.vm.vendor     Apple Inc.
    java.vm.version     14.3-b01-101
    Here is the OS information:
    os.arch     x86_64
    os.name     Mac OS X
    os.version     10.6.2

  • My Touchsmart tx2z-1000 : "The user profile service failed to logon User profile cannot be loaded"

    Hi!!
    Has  anybody had this problem?  I want to get into safe mode, but the F8 key doesn't do anything. Is there any way to access system restore without logging on? Windows 7 64bit
    Any ideas on how to solve this problem?  Thanks!! 

    Hi Julianne_27_Chambers,
    Have you got other administrator accounts in this machine ?
    According to your description,it seems that the present user account profile has corrupted .
    We can create a new administrator account and then login with it .Then we can refer to the following link to fix the corrupted user profile .
    Fix a corrupted user profile
    http://windows.microsoft.com/en-hk/windows/fix-corrupted-user-profile#1TC=windows-7
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Capture Noise Print doesn't stick

    I had to reinstall Audition CC to restore broken Dynamic Linking with Premiere. Now, whenever I capture a Noise Print then open the Noise Reduction process, it hasn't retained the profile. I have to capture from within the NR process in order to get a print. Simple enough to do but was wondering if anyone else was experiencing this.

    I've also had it happen before and, like you, assumed it was me so I didn't report it.
    Today I was being fairly careful because I was going to write a "did you do xxx" reply to the OP--and my first try didn't retain the noise print where my second one on the same recording did.
    One thing I noticed was that the graphic display appeared to give noise print details but they's wouldn't move when I adjusted the sliders.
    Possibly an intermittant bug?  Certainly one to keep an eye on.
    Edited to add an update:
    Playing with the NR and noise print, it appears that the first time after opening Audition, if you use "Capture Noise Print" (Cntrl P) from the main "twirl down" it doesn't stick.  Subsequent uses of the facility are fine but, once you've closed Audition and re-opened it, you get another "blank".  I suspect the reason I've not noticed this properly before is that I quickly learned there are fewer clicks to simply go into NR and grab the noise print from there rather than get one "on the way in" as it were.
    Anyhow, that's what's happening on my machine.

  • Closing the browser in InfoView doesn't log the user off.

    In Business Objects XI R2 Infoview, closing the browser in InfoView doesn't log the user off no matter how you answer the subsequent popup question "A window has closed. Log off as well?" Is there a fix for this somewhere?

    hi,
    In InfoView, with Performance Management installed, user sessions fail to be released immediately when the Log Off button is clicked.
    If you click the logoff button in Infoview and watch the address bar you will notice that it actually goes to another page called default.htm. It does this really fast. That page is located at C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\InfoView. Remove both the default.htm and index.html and reboot your Tomcat server. Open a browser and go to Infoview. Once you have gotten in to Infoview click the log off button. You will get and error from the tomcat server and that is because the page does not exist anymore. If you look in CMS under servers and CMS you will also notice it dropped the session as well. So if you create another Default.htm page of your own and just redirect to another page it all should work.
    However I did notice an interesting ADAPT in CHF15 :-
    http://support.businessobjects.com/CommunityCS/FilesAndUpdates/boxir2_en_chf15_readme.pdf
    ADAPT00576483 Patch ID: 39,216,665
    Also did u do any customization setting before ?

  • IMac G5 System Profiler doesn't work?

    My system profiler doesn't open. Cannot find in anywhere, applications or any other area. Is it Lost. Can I reinstall, any help would be appreciated
    ImacG5   Mac OS X (10.3.9)  

    If you are not successful from re-running the combo update, remember to do a Permissions repair on the entire hard drive using the First Aid panel of Applications>Utilities>Disk Utility.
    Also, boot from the current OS's install disc 1, find that version of Disk Utility among the pull downs at the top of the display, and do a Disk Repair on the entire hard drive, rerunning it repeatedly if necessary until it reports that no repairs are necessary.

  • Impact on roaming profile accounts if we Change User logon Name to Employee Number format in Active Directory for all User accounts

    I want to understand if we change User logon Name to Employee Number format in Active Directory for all User accounts, then what would be the impact on existing profile. Whether we need to change it manualy or it will connect to same profiles in terminal
    session.
    As i observed it create new profile after logon name changed to employee number where existing users profile settings get fails to load and prompt for new settings (such as outlook reconfiguration, share drive mapping etc.).
    Kindly let me know the proper process to overcome with this, how to connect same existing roaming profile with employee number format change.

    Hi,
    What if we change the user name of user account, will it have impact on roaming profiles.
    Yes, it will affect roaming profiles. Please rename the roaming profile folder as the new user account name, in addition, change the profile path in ADUC.
    Here is an related article below for you:
    How to Rename a Windows 7 User Account and Related Profile Folder
    http://social.technet.microsoft.com/wiki/contents/articles/19834.how-to-rename-a-windows-7-user-account-and-related-profile-folder.aspx
    Best Regards,
    Amy

  • Monitor profile - does not stick

    Hello,
    I have an Imac on Tiger, 1 admin account and 3 standard users.I calibrated a long time ago with a tool from Pantone and was fine with it. A few weeks ago I bought my own calibration tool(Eye-One) to update the monitor profile. The profile is used when I boot the computer. When I switch to another account the profile is still correct. When I switch back to my account the profile jumps bto "Generic RGB profile"
    The interesting thing is that I can not change the profile in System preferences. If I click on any other profile I just get a "ping" sound and that's it.
    If I then restart the computer it uses automatically the profile I created with the tool.
    The profile is stored under Macintosh HD/Library/Color Sync/Profiles
    I assume that this is correct.
    I have not had this issue with the first monitor profile done with the Pantone tool.
    Thanks for any advice
    Sigi
    Message was edited by: Siegfried Braeuer
    null

    I have multiple profiles on my MacBook. I calibraded using the Pantone Huey Pro color meter and software, and the profile is stored in my user:Library:ColorSync:Profiles directory, not the system:library one. I've never used the Eye-One; did it give you the choice of location to save at calibration time?
    I haven't had any issued with the monitor profile being stored in my user profile. It's also stored in my user profile on my G5.

  • I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

    I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

  • Are Profiles and DBA Access to users required after MRCA is installed ?

    Customer has installed oracle B2B through MRCA .
    There are 4 questions that need to be answered.
    Question 1
    ===========
    We would like to know if the profiles and DBA access to users are required after MRCA is installed ?
    Question 2
    ==========
    If we remove these privileges will there be any impact to future Application Server upgrades, applying of patches ?
    Question 3
    ============
    There is a schema called BASEDEF with the two roles BASEAPP_ADMIN and BASEAPP_INSTANCE_ADMIN .
    Please could you let us know the purpose of this schema and its usage ?
    Question 4
    ============
    Does the schema BASEDEF affects b2b in any manner ?
    Regards,
    Suresh

    Hi Suresh,
    Please find below answer of your questions-
    1. Profiles are created automatically during installation and they are required for maintaining the functionality of B2B. DBA access to these profiles are not required.
    2. If you revoke DBA access from the profiles, then it should not affect the functionality of B2B. Generally Patch scripts are run on account "b2b" and this account does not have dba access so there should be no problem due to access revoke.
    Any DBA can answer your 3rd and 4th question.
    Regards,
    Anuj

  • Apple doesn't allow Mail users to open links with Chrome

    Apple doesn't allow Mail users to open links with Chrome, Chrome is the deafult browser and it seems that there is a blockage for 3rd party browser, not very nice !!!!!!

    Apple doesn't allow Mail users to open links with Chrome, Chrome is the deafult browser and it seems that there is a blockage for 3rd party browser, not very nice !!!!!!

  • SDK 3.0 error: profile doesn't match Application Identifier

    I'm testing my app w/ iPhone SDK 3.0 beta 5 on Xcode 3.1.3.
    Development provisioning profile under "Project-> Info -> Code Signing Identity" is grayed out & shows the error(including quote at the end):
    profile doesn't match Application Identifier "
    any ideas? The same profile has no such issue w/ SDK 2.2.1 on Xcode 3.1.
    My Bundle Identifier is of the below format :
    com.<mycompanyname>.{PRODUCT_NAME:identifier}
    I specified the "Product name" under both "Project -> Info" & "Target -> Info".. that didn't help either.
    I also noticed that there is no such problem under "Target -> Info -> Code Signing Identity"
    I'm testing to ensure compatibility of my 2.2.1 app with 3.0. I appreciate any help with this issue.. It has been a frustrating couple of days trying to resolve just this one issue which is preventing me from codesigning onto my iphone

    I was able to deploy to my iphone by following the instructions here
    http://www.loonsoft.com/posts/21
    Note: it is {} and not () ${SDKROOT}/ResourceRules.plist
    I was getting the below error during codesign & I thought that the above "graying out" of the dev provisioning profile in the "Code Signing Identity" was causing it.
    "object file format invalid or unsuitable"
    Turns out it does not prevent me from deploying to my iphone after I fixed the SDKROOT. I still have the dev provisioning profile grayed out and would be interested to know how to solve this problem "cleanly" even though it doesn't seem to have any immediate downside.. fingers crossed for distribution signing.

  • Jdev CPU profiler doesn't show inherint method timing - Any way to get it

    Hi,
    CPU profiler both in HOTSPOT and Callstack doesn't give method's inherint timings . it only shows parent + descendant timing (inclusive timing) . This doesn't help me to quickly find which method inherintly is expensive (ie timing withouts its child included ) .Is there a way to get the timing of a method without including its child method timing ..
    Regards,
    Indraneel

    Depending on what version of JDeveloper 11 you are running, exclusive time in a method is called "CPU Exclusive" or "CPU Shallow" in the CPU profiler column headings. The column is there; there is data in the column for some methods (Click on the 'CPU Exclusive/Shallow' column to sort by those values). So it's hard to understand how the profiler does not report it.
    Perhaps your issue is that the profiler doesn't report it accurately?

Maybe you are looking for