Profile has expired

I just renewed my ios development program and my contract is active as of now! But my team provisioning profile still says "Profile has expired". I tried to refresh my profile, still no success! Do I have to remove this profile and add a new profile or renew this profile, if so how? Would appreciate every piece of advise and thanks!
Stanley D

Thank you for your reply. I didn't read the instructions as well as I thought I had. It is necessary to remove the old profile by navigating to Settings>General>Profiles on the iPad and deleting the expired profile.
There were two different web pages with different instructions. The instructions on the download page linked to the users manual which was written when her employer initially released the application and said nothing about removing the old profile. However the page that linked me to the download page had a paragraph with instructions to remove the profile. I didn't read that far before clicking the link to the download page.
Anyway it works now. Thank you very much.

Similar Messages

How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

i'm not quiet sure atm but should normally work like this:
connect to itunes store -> log out with ur account (upper right corner where ur apple id is displayed) -> sign in with ur wifes apple id -> activate computer (store->activate this computer)
normally it should work this way but ur wife wont be able to use apps or music within itunes library purchased with the other apple id

'provisioning profile has expired'

When I try to open application on my ipad 2(wifi only), it says 'provisioning profile has expired' I created my profile just now though. What should I do to resolve this. Thank you

Thank you for your reply. I didn't read the instructions as well as I thought I had. It is necessary to remove the old profile by navigating to Settings>General>Profiles on the iPad and deleting the expired profile.
There were two different web pages with different instructions. The instructions on the download page linked to the users manual which was written when her employer initially released the application and said nothing about removing the old profile. However the page that linked me to the download page had a paragraph with instructions to remove the profile. I didn't read that far before clicking the link to the download page.
Anyway it works now. Thank you very much.

Application cannot be opened beacouse provisioning profile has expired

what should i do?

Clearing cookies will do nothing to fix this.
What is the app? Provisioning profiles sare used by developers to distribute applications to testers or by companies distributing enterprise apps internally to their employees. In either case, the profile has an expiration date. If your are getting this message, the app will not run until the developer or company provides a new version of the app with a non-expired provisioning profile.

Getting error "Your session has expired. Restart this wizard to continue" when I create / configure service applications

Last week, I installed 3 virtual servers (WFE, APP and DB).
When I started to create the service applications on the app server, several of them gave me the following error at the end:
"Your session has expired. Restart this wizard to continue. "
Although the error occured, they actually are created. But I'm having difficulties with the Secure Store Service. I try to add a new Target Application and when I click Next, I get the same error.
I tried to delete the application and recreate it. Tried to stop/start the Secure Store Service. I'm doing this as a local admin on the server (which was also used for installation and configuration of Sharepoint).
No events in the eventlog. There is some logging in the ULS :
01/05/2011 15:44:11.71 w3wp.exe (0x102C)                       0x00E4 SharePoint Foundation
Topology                      rzlc High    The current state '_admin/sssvc/managetargetapplicationinstance.aspx'
doesn't match the Page '_admin/sssvc/managetargetapplicationfields.aspx' 73d50e6f-d63e-4cb8-b13b-2a6d50deb1d6
01/05/2011 15:44:11.71 w3wp.exe (0x102C)                       0x00E4 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.SPException: Your session has expired. Restart this wizard
to continue.    at Microsoft.SharePoint.Administration.SPScenarioContext.GetContext(Page page, CultureInfo culture)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageTargetApplicationFields.OnLoad(EventArgs
e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 73d50e6f-d63e-4cb8-b13b-2a6d50deb1d6
The funny thing is... the service applications which I expected to give me some kind of trouble, are working perfect (User profile sync, Search). I installed numerous servers in the past 3 months and this is the first time I'm running into this and it's
driving me crazy.

After searching and searching, I found something...
http://social.msdn.microsoft.com/Forums/eu/vsreportcontrols/thread/ca916bff-e996-41a2-b547-16542a298c39
And the first reply caught my attention.
It says that if your servername contains an underscore, these kind of errors might occur.
And for sure, my servernames contain underscores. DOH!
I'm going to change it and recreate the farm... just to be safe. Will get back with the results.
Did renaming the server help?

Creative Cloud subscription, "your trial has expired."

I have been a Creative Cloud subscriber for more than a year, yet each time I start up an application I am told, "your trial has expired." Each time for each application it seems I must "click license this software" and then go through the log in process before I go to work.
Why? This is really frustrating!

guywclinch wrote:
Eshant_Jinda,
The problem above came back for the past two months (seems like after the monthly renewal kicks in). I also keep getting a notification in my Windows Action Center that says, "Complete your Adobe ID profile and register your products." I've gone over my registration info comprehensively. I don't see any information missing.
Each time it is, I've got an idea. I want to turn it into something and I have to deal with this BS yet again. This may seem like minor irritation, but it speaks to me that Adobe doesn't value me as a customer.
I'l appreciate any help you can give. Thank you.
- Guy
guywclinch wrote:
Eshant_Jinda,
The problem above came back for the past two months (seems like after the monthly renewal kicks in). I also keep getting a notification in my Windows Action Center that says, "Complete your Adobe ID profile and register your products." I've gone over my registration info comprehensively. I don't see any information missing.
Each time it is, I've got an idea. I want to turn it into something and I have to deal with this BS yet again. This may seem like minor irritation, but it speaks to me that Adobe doesn't value me as a customer.
I'l appreciate any help you can give. Thank you.
- Guy
guywclinch wrote:
Eshant_Jinda,
The problem above came back for the past two months (seems like after the monthly renewal kicks in). I also keep getting a notification in my Windows Action Center that says, "Complete your Adobe ID profile and register your products." I've gone over my registration info comprehensively. I don't see any information missing.
Each time it is, I've got an idea. I want to turn it into something and I have to deal with this BS yet again. This may seem like minor irritation, but it speaks to me that Adobe doesn't value me as a customer.
I'l appreciate any help you can give. Thank you.
- Guy
guywclinch wrote:
Eshant_Jinda,
The problem above came back for the past two months (seems like after the monthly renewal kicks in). I also keep getting a notification in my Windows Action Center that says, "Complete your Adobe ID profile and register your products." I've gone over my registration info comprehensively. I don't see any information missing.
Each time it is, I've got an idea. I want to turn it into something and I have to deal with this BS yet again. This may seem like minor irritation, but it speaks to me that Adobe doesn't value me as a customer.
I'l appreciate any help you can give. Thank you.
- Guy
guywclinch wrote:
Eshant_Jinda,
The problem above came back for the past two months (seems like after the monthly renewal kicks in). I also keep getting a notification in my Windows Action Center that says, "Complete your Adobe ID profile and register your products." I've gone over my registration info comprehensively. I don't see any information missing.
Each time it is, I've got an idea. I want to turn it into something and I have to deal with this BS yet again. This may seem like minor irritation, but it speaks to me that Adobe doesn't value me as a customer.
I'l appreciate any help you can give. Thank you.
- Guy
And here we go again. Except today we are stuck in an endless loop as the validation screen keeps appearing for 20 seconds and then going away.

The Web Dynpro Application 'Appl' has expired.

Hallo altogether,
i am a newbie in this area.
I maked a simple Web Dynpro with two views,
only for navigation test
and without data transport.
Everybody view consist of two elements:
one TXV_Field and one BTN_Element.
V_ONE:
TXV_ONE with a text "View one",
BTN_GO + action GO,
OP_TO_TWO,
IP_FROM_TWO
V_TWO:
TXV_TWO with a text "View two",
BTN_BACK + action BACK,
OP_TO_ONE
IP_FROM_ONE.
There are two links between views builds.
I cann my application APPL deploy without problem and without error messages.
I see my V_ONE im browser.
If i click the button BTN_GO ==>
The Web Dynpro Application 'Appl' has expired.
I controlled the file default.properties
the timeout = 3600.
what cann i do????
Thank,
vmath.

1. check ur server configuration windw> preference->j2ee-engine.
I have DeveloperStudio local on my PC.
There are following settings for j2ee-engine:
SAP J2EE-engine is installed on local host
System name: J2E
J2EE Instance: 0
SCS Instance: 1
BEN_1\sapmnt\J2E\SYS\profile\J2E_JC00_ben_1
BEN_1\sapmnt\J2E\SYS\profile\J2E_SCS01_ben_1
vmath

The Context has expired and can no longer be used error

Hello All,
I am getting ‘The context has expired and can no longer be used.’ error.
The last thing that was modified on the farm was Distributed Cache Service.
We stopped it on the application server and only have it run on the two WFE’s servers.
Also the cache size was changed to 2048MB.
Is it possible that this change is causing the error?
We don’t have ‘Default Time Zone’ selected for the web application.
But we never saw this error till now.
Any suggestions?
Thank you,
Zabcia

Hi Zabcia,
Thanks for posting this issue,
following could be the reason of raising this issue
1. Security context of your session might be expired
2. Somebody/you might have change the data time of your server.
you can follow below mentioned steps to fix this issue
Just change/update the Date/Time in the SharePoint server
Increase the Security context in SharePoint central admin. This can be done by following the below steps:
Go to central admin
Go to "Application management section" Go to "Web Application General Settings"
Go to "Web page Security validation" section & increase the timeout field. Or, you can simply disable this option.
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to solve tproblem "Your session has expired" temporary.

I think developers always feel frustrated about a issue when Uploading app & Downloading data and meeting a problem of message: "Your session has expired. Please click Login to log back into iTunes Connect."
I suggest you have to email to Apple via "Contact Us" to report this issue, but I have another way to solve this temporary.
It is the problem of system time.
So you can follow these steps to solve it temporary:
1. Logout any web site which using Apple ID.
2. Disable your Auto time sync of your system clock.
3. Choose a day in the future at least 1 day further and apply to clock.
4. Login iTunes Connect again.
Now you will have the time about 10 minutes to work until session has expired again.
If it happen again, you can:
1. Close browser
2. Adjust system clock go further 1 or more days future again.
3. Login again.
Repeat those steps until your work has been done.
After all, this is temporary effective, you have to wait Apple to really solve on their servers' side.
Message was edited by: Googol Lien

Sure, you can set an expiration time on the session, but if the session is invalidated by the container, then you have no way of determinig if the user is accessing a page with no session or with a session that has expired.
There is a difference between the two cases. A user accessing a page with no session context should be redirected to a login page with no message indicating why they are being redirected. But a user accessing a page with an expired session should be informed that their session has expired and they are required to login in again.
This is the convention that most high-profile site on the web implement into their owns applications.
SAF

Can't access my program. Get notice trial version has expired

I purchased Adobe Photoshop Elements 12 for school. I recently installed it on my computer on 1/8/14 and registered it 1/13/14. I went to get it in yesterday and I received a notice that my trial version has expired and am unable to get in to photoshop completely. I have the product serial number or license and it is in my profile. I don't recall doing it but I might have downloaded a trial verious last year. If that is the case, I figure that might be causing me all the issues. My question is how do I remove that trial version and begin using my licensed version? Any help is greatly appreciated!!!! I have assignments due and it's hard to get them done when I can't even access my program.

Glad you got it working. But I'm concerned by the 'couldn't get anywhere' statement when you tried to sign in with your Adobe ID. Take a look under your Help menu in the Editor and make sure you have a 'Sign Out' entry followed by your Adobe ID email address. If not then at some point soon you will get a warning that the software needs to be signed in to keep using it. If not a Sign Out, then there should be a Sign In - that you should choose and try again.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Trial Has Expired

I cannot access the Photo Editor feature in PSE 12. There is a message stating that "Your trial has expired, buy now." I installed my PSE from a CD for windows onto a brand new HP 110-014 computer with Windows 8 OS. I entered the serial number and registered it with Adobe as well. I have uninstalled and reinstalled at least three times in hopes of curing the issue. So far no sucess. Each time that I reinstalled I reentered the serial number. Could really use some help, please.

Can you get in to Editor at all? If you can then try going to:
Help >> Complete/Update Adobe ID Profile
Make sure the Internet is on when you are doing this so that Adobe can register their authorization code in the Windows Registry. With PSE12, it is a requirement to have Internet at least once when registering the product.
If you can't get into Editor at all then you will need to contact the Above staff by going to this link:
<http://helpx.adobe.com/uk/contact.html>
There is a chat button at the bottom of the screen when you have selected your product and gone for Serial number and Activation problems.

Outlook 2013 Clients certificate has expired warning or not yet valid

Hello,
We had been through a migration from exchange 2010 to 2013 in the last year but have had an ongoing issue with
some Outlook clients getting a certificate warning after they launch the client. Not all Outlook clients experience this. We've just recently uninstalled exchange from our 2010 servers and shut them
down. What we have left are two 2013 servers in a DAG. The certificate these Outlook clients are complaining about had expired in 2012. Here is the warning they are getting:
"Certificate has expired warning or not yet valid"
I've been through numerous threads/sites regarding this error but it always ends up that there was an expired cert hanging out somewhere. I cannot seem to find an expired cert anywhere...
I've ran the 'Get-ExchangeCertificate | fl' cmdlet and I see 7 certs listed, none of which match the thumbprint on the Cert Warning on Outlook.
When I check the registry of the Exchange servers here: HKLM>Software>Microsoft>SystemCertificates>My>Certificates
I can see 7 certificate entries listed there and the thumbprint matches those of the cmdlet ran from
EMS.
OWA shows the correct cert expiring in 2015 and Outlook clients are pointed to the 2013 servers. We do have a load balancer that AutoDiscover, OWA, SMTP are going through.
It seems like some of these Outlook clients are still looking at the decommissioned 2010 Exchange servers' old certificate. Any ideas on how I can get outlook to point to the new certificate/server?
Thanks.
Rory
Rory Schmitz

Hi Rory,
If possible, could you please post the Get-ExchangeCertificate | FL results about the certificate which is assigned with IIS service here?
If the issue only happens for some users instead of all users, please create a new Outlook profile for the problematic user to check whether the issue persists. Please make sure the certificate name which is reported as expired or not valid is included
in the IIS service certificate in your Exchange 2013.
In Exchange server side, please restart IIS service by running IISReset /noforce from a command prompt window to have a try.
Regards,
Winnie Liang
TechNet Community Support

"your password has expired" popup

I do not have any SR left with Novell.
How can I obtain the fix in VO as mentioned?
"your password has expired" popup after user changes admin set password
in Virtual Office
http://www.novell.com/support/viewCo...6911&sliceId=1
"your password has expired" popup after user changes admin set password
in Virtual Office
This document (3456911) is provided subject to the disclaimer at the end
of this document.
Environment
Novell Virtual Office
Situation
After the user first logs in (or after admin resets the password) and is
prompted to change their password. After the password is changed
succesfully a further popup box appears "Your Password is expired". The
user can cancel this box and continue. This behavior does not occur
outside of Virtual Office.
Resolution
Submitted to development.
Fix is available by request.
Status
Reported to Engineering
Additional Information
Formerly known as doc # 135
To Reproduce:
NetWare 6.5 Support Pack 5
Add a UP policy to a container, set policy to expire password after 30
days and give 6 grace logins.
Add forgotten password option and use the sample challenge set.
Create a new user in this container. No Other container or user password
restrictions other than the defaults should be set. Login to VO as the
user - get prompted to change the password.
After Changing Password, the POP UP will appear saying password has expired.
If you disable the grace logins from the UP Policy this works fine.
Document
Document ID: 3456911
Creation Date: 03-27-2007
Modified Date: 06-24-2008
Novell Product: Open Enterprise Server

DrumDude wrote:
>Any Luck in getting the patch?
Alas, our official Novell contacts are on vacation. I received an
unofficial answer that you should try to open an incident and try to
reclaim your money afterwards.
Marcel Cox
http://support.novell.com/forums
Marcel Cox's Profile: http://forums.novell.com/member.php?userid=8

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

Adobe Photoshop CS4 Extended, owned for ages, licensing for this product has expired? Was using it two months ago.

Hello,
I have been trying to get Adobe's help for over a month now. I've been on the phone twice to them, opened up three seperate cases and still arrived at no solution. I was bought Photoshop CS4 Extended awhile ago and use it for my studies (I'm an art student). Two months ago my harddrive on my computer failed and I had to have a new laptop. I went to reinstall Photoshop and "Licensing for this product has expired" comes up. I've uninstalled, inreinstalled many times and used Microsoft Fix It Programme for uninstalling to make sure all the files are gone.
Surfing the forums I learned that there should be a folder with back up and Adobe PCD but I don't have that folder at all. The serial number I use is my original serial number that I know works and adobe have even said it's a technical error. What do I do? College starts again in two weeks and I don't have the programme I use for it!

Try the License Repair Tool Adobe - Adobe Licensing Repair Tool
Other suggestions if this doesn't work: Error "Licensing has stopped working" | Windows
Also if you must uninstall, use the Adobe CS Cleaner tool, not the Microsoft one. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Profile has expired

Similar Messages

Maybe you are looking for