Profile rule for Date
Hi,
I need to execute a profile rule.
My requirement is - a new field "Created date time" date type which should always show the date time it was initially created.
I have put in a rule as
<$ifparseDate(#active.xCreatedateTime) IS NULL$>
<$dprDerivedValue=#active.dlndate$>
<$endif$> "
but nothing comes on teh Content Information page.
I even tried giving it a default value as dlndate but get eror that it is not able to parse teh date.
"<$parseDate(#active.dlnDate)$>"
Kindly help.
Regards
Shashwat
Odd. Mine works perfectly, once you fix the code syntax issues. "IS NULL" is not a valid IdocScript construct, and dIndate is not a valid field name (try "dInDate"). Don't use dInDate for this situation anyway. That's not the "creation date" -- dCreateDate is the system "creation" date.
If the target field name is "xCreatedateTime"
<$if not #active.xCreatedateTime$>
<$dprDerivedValue=#active.dCreateDate$>
<$endif$>
Verify that your custom field name is actually called "xCreatedateTime". Field names are case-sensitive.
The actual utility of this particular custom field is questionable. It makes more sense to write a customization that just shows the value for dCreateDate. Why put the same data in multiple fields?
Similar Messages
-
Rules for Date Determination in Sales Contracts
Hi everyone,
I have a need for an "enhanced" rule for date determination to be used in a contract profile for a sales contract.
In our current system (SAP ECC 6.0) only the following rules are possible to choose:
01 Today's date
02 Contract start date
04 Acceptance date
05 Installation date
06 Date contract signed
07 Billing date/Invoice date
08 CntrctStDate+contract duration
09 Contract end date
In supplement to these I would like to create
ZZ CntrctStDate+to year end
This rule should set the end date in the contract according to the following logic.
If the Contract start date is between YYYY-01-01 and YYYY-05-31 the Contract end date should be calculated to YYYY-12-31 in the current year. Else (if Contract start date is between YYYY-06-01 and YYYY-12-31) the Contract end date should be calculated to YYYY-12-31 in the following year.
I have searched the IMG and Development Workbench but I canu2019t find any place where it is possible to create own rules like the ones above (that is defined by SAP). Does anyone have a tip on how to proceed?
Best Regards
Patrik BergströHi everyone,
I have a need for an "enhanced" rule for date determination to be used in a contract profile for a sales contract.
In our current system (SAP ECC 6.0) only the following rules are possible to choose:
01 Today's date
02 Contract start date
04 Acceptance date
05 Installation date
06 Date contract signed
07 Billing date/Invoice date
08 CntrctStDate+contract duration
09 Contract end date
In supplement to these I would like to create
ZZ CntrctStDate+to year end
This rule should set the end date in the contract according to the following logic.
If the Contract start date is between YYYY-01-01 and YYYY-05-31 the Contract end date should be calculated to YYYY-12-31 in the current year. Else (if Contract start date is between YYYY-06-01 and YYYY-12-31) the Contract end date should be calculated to YYYY-12-31 in the following year.
I have searched the IMG and Development Workbench but I canu2019t find any place where it is possible to create own rules like the ones above (that is defined by SAP). Does anyone have a tip on how to proceed?
Best Regards
Patrik Bergströ -
Report on settlement profile/rule for the Process Orders ?
Is there any report which will display settlement profile for process order or settlement rule for process order.
Hi,
Did you try this one: KOSRLIST_OR - Settlement Rules?
Regards,
Eli -
BI Content Transformation Rule for Data Source 2LIS_03_BX
Hi All,
I am using BI content info cube 0RT_C54 for queries. I am uanble to find BI content transformation rules for the Data Source 2LIS_03_BX. In "Network Display of the data flow" I am able to see the transformation rules for this data source. How can I activate and use the same ?
Regards,
RohitHi ankit,
Have u done all the mandatory settings before running setup for stock init.
1. Determine industry sector.
2. Maintainng process keys,
3. Maintining Application Indicatore in BF11.
Also activate other two ds - 2lis_03_bf & UM.
Then try to fill again setup data.
Hope this helps to u.
Thanks
Dipika -
How to correctly set detection rules for date modified
How are application detection rules for modified or created date calculated. For example if I want the detection rule to use a file that was modified today or any day after today do I set it as Greater than or equal to or less then or equal to in
the Detection rule?You would use Greater than Or Equal To. Greater than or equal to means that time or anything after. The latter would be that time or before
Dustin Estes - MCP | www.dustinestes.com -
How do I apply rules for date to cell
I use numbers 3.1. And I have trouble to apply a specific rule for a cell. I want to achieve an automatic fill in for a cell for todays date. So I open the filter on the right side of my document. I chose "date and time" and then I define the rule for its altering application for every week. I manage to go over the definition insofar as I choose "today" and the style "kursive". But I am unable to fill in this information into the cell. I hope I explained this function understandable for I am German and I use of course the German layout in Numbers. ( I could not find a german speaking platform for my problem ). Can someone help?
Courtesy of Google Translate
Dear sorole,
Typing the date:
<image>
Typing "=" shows the Function Browser:
<image>
Regards,
Ian.
Mit freundlicher Genehmigung von Google Translate
Sehr geehrte sorole,
Die Eingabe des Datums:
Die Eingabe von "=" zeigt der Funktionsübersicht:
Grüße,
Ian. -
COLLECT statement in start routine of update rules for data coming from R/3
Hi,
I have more than one record with the same key combination that comes from R/3. I have a condition wherein I write into an error log. Hence I want only ione entry to be written into a error log and not multiple instances.
I had written a similar one for ODS.
Loop at IT_ODS into WA_ODS.
Collect WA_ODS into IT_SUM.
How to collect data that is coming in from R/3. Any inputs?Hi,
I think, by using ATEND you can acheive control break logic.
Regards,
-Vj -
Start routine in Transfer Rules for Data Mart update
Hi,
Is it possible to create a start routine in a transfer rule of a Datamart update (from ODS to Cube)?
Thxs.
LauQRoberto,
If I read well the content of note 499404 - referred to in 630854 - I conclude that it is recommended to use update rules rather than transfer rules in the case of ODS objects when one wishes to modify data records up to the eventual data target.
Do you agree?
Thxs.
LauQ -
Filters and rules for Data Synchronizer
Unfortunately or luckily our datasync server is positioned in the internal
network. The main reason is the archiving solution for groupwise mail which
uses a special connector on the datasync server to capture all email for
specific mailboxes. So the entire mailflow can remain in our internal
network and is not transferd out in the DMZ.
But for few devices (like iPhone, iPad or smartphones with Android) with active
sync protocol I want to sync the groupwise email, appointment and contacts
to that devices.
My problem, however is that the mobile devices want to use a secure connection on port 443 to get over 2 Bordermanager 3.9 SP2 servers.
I did́ t find any examples on filters and rules in the documentation to
do this.
My idea is to use a nated public ip adress on the outer BM-server and
acceleration on the inner BM-server.
Maybe I am wrong and there are or is a better solutions.
It would be great, if there is anyone who can help me with this problem
Best regardsjeep,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Data not coming from DOE to Mobile After defining Rule for device attribute
Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
AbhishekHi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w -
How can I activate the transfer rules for the ODS updating a data target.
We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
DennyHi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm -
What are the two different rules for organizational data determination
What are the two different rules for organizational data determination???
Hi
1) Rule type Responsibilities
want to determine organizational data for individual responsibilities
have not created an organizational model but want to create one
have a lot of organizational units and must only assign a few attributes
2) Rule type Organizational Model
You would use rule resolution using organizational model if you
have created an organizational model or have distributed a plan to SAP CRM and also want to use this for determining organizational data
assign a lot of attributes to the organizational units and these are to be evaluated
Regards
Manohar -
Date management: XML-editor for Date Rules
Hello,
I'm looking for any documentation on the XML-editor for date rules (tags, attributes and so on).
Please send to [email protected]
Regards,
RomanHello,
I'm still looking it...
Any help will be appreciated.
Regards,
Roman -
Table Name for Date Profile & SLA
Hi,
What is the table name for Data Profile / Date Type etc and also for SLA tables?
Rgds,
VR.Hi
here are the table for date profile, service profile and response profiles.
1. Date profile:- CRMC_DATES_PRF
2. Service profile:- crmd_serwi
3. Response profile :-crmd_escal
Regards
Naresh -
Table for Data source and Transfer rule mapping
Hi all,
Do we have any table where in we can know the different transfer rules(for different source systems) assigned to the same Data source.
thanks and regards,
Rk.thank you all,
the table RSDS does not have 3.x data sources, it has only 7.0 Data sources also it does not have the field mapping.
RSOSFIELDMAP and RSTSRULES have the field mapping of the datasources, do we have any similiar tables for 7.0 Datasources.
regards,
RK
Maybe you are looking for
-
I have a new computer with windows 8 and i installed new version of itunes. I transferred all of my music from old computer using jump drive. When I connect my ipod to new computer, I can't transfer purchases, sync, get my playlists from ipod onto
-
Leap year issue in depriciation
Hi All, I have an asset which is acquired on 16th January 2008. 2008 being a leap year should calculate depriciation according to 366 days in a year. However it is calculation on the basis of 365 days in a year. Where should this setting of leap year
-
Sudden 0.2mb connection
Hey guys and gals. My problem has only been happening maybe a week and a half. I usually have between a 3mb to 5mb connection, this has nose dived to 0.2mb. I have tried resetting the hub both standard and to defaults. I have noticed my home hub also
-
F110 printing Checks for Customers
Hi All, While running F110 checks are being printed for customers who have received credit. The client does not want checks printed for Customers, but rather wanted the customer to be credited. How do i change F110 to ensure only payment to vendor
-
My mails disappear from my iphone after a few days. Sometimes I don´t even had time to read them. They also go missing from my computer. Does anyone know if there is a mailsetting which does this? Can I fix it myself?