Profit center assessment - 3ke5
Hi Experts,
Need your help, I have defined the profit center assessment in the segment header under the receiving tracing factior selected actual quantities as var.portion type, senders and receivers i have given sender profit center and receiver profit centes, in the receiver tracing factor i have given the SKF, the SKF is created for sales qty, means the cost should be distributed based on sales qty of each business unit, after defining the actual assessment cycles when i try to run the cycle I am getting warning message " The segment contains no receivers ", please let me know is there any pending customisation.
This is the message i am getting
The segment contains no receivers
Message no. GA733
Diagnosis
No receivers were found for segment ADMN.
System Response
Further processing of this segment is not possible.
Procedure
Check the segment definition in the maintenance transaction for EC-PCA: Actual Assessment.
Possible errors are:
1. You have set the selection criteria for the receivers so that no valid receivers could be found.
2. The selection criteria for the tracing factor (tracing factor "Variable amounts") are not suitable for the field group selected. Example: "Actual statistical key figures" was selected as a field group, but no key figure was stored in the associated field.
3. The system cannot find any receivers due to the inheritance logic for allocations. This problem only occurs in FI-SL totals tables for which the "Inherit from sender based on the receiver" indicator is activated in the "Partner object update" screen (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
To check this, use transaction GCA8 and see the section on:
Inheritance Logic for Allocations
and correct the affected cycle, if required.
Regards,
Zain
Hi Guys,
We are running in the same issue as Zain above (error message GA733). Unfortunately he did not indicate what fixed his issue
we have ECC6, the SKF on receiving profit centers are indeed populated
We run across this note: SAP Note 114014 - Stat. key figures in assessment /
distribution that may be of interest (but we are on ECC6 ...)
Any idea ?
Thanks for your time
Loïc
Similar Messages
-
Assessment cycle from Profit center to profit center in CO-PA
Hi,
We have a scenario where revenue pertaining to other profit centers get booked in HO Profit centre and co-pa is active. Now the requirement is from Ho profit center revenue should be transferred to respective profit centre in profitability segment.
I know profit center assessment is possible through 3KE5 and 4KE5. But requirement is through the assessment values should posted to respective profit center in Profitability segment and not only in profit center accounting.
Thanks in advance.
Regards
Karthikeyan GHi Ajay,
Thanks for your input. I tried to do TDD from one profit centre to 3 different PC. I want to transfer from PC 1004 to PC 1001, 1002, 1003. I have created reference data for 3 PC's by posting to sales quantity field and mentioned profit centre.
Profit Centre 1001 - sales quanity 100
1002 - sales quanity 200
1003 - sales quanity 300
Value field mentioned in profit centre 1004 (i.e. sender) is Gross billing with value 1 lakh. Selected pc as distribution radio button and selected value field gross billing and in selection criteria i have selected 1004 PC from which values is to be distibuted. However while executing I am getting below error message,
This processing rule is not allowed
characteristic Profit Center"
Can you kindly guide where am going wrong.it will be of great help.
Thanks in advance.
Karthik -
Assessment cross profit center and FI document
we did CCA assessment cross profit center, assessment cost element is 901000, we expected in new GL, a new GL FI document will be generated,
thus we already set balancing GL account 800000 in new GL, but how to config the other GL account 820000 to link to assessment element 901000?
so we can have JV like below
Dr: 820000 100 USD profit center A
Cr: 800000 100 USD profit center A
Cr:820000 100 USD profit center B
Dr: 800000 100 USD profit center BSiva,
You need to map reconciliation GL account (in your case 820000) for your assessment cost element. You do this in Customizing for Financial Accounting (New) under Financial Accounting Global Settings (New) → Ledgers → Real-Time Integration of Controlling with Financial Accounting → Account Determination for Real-Time Integration.
Regards,
Szymon -
SKF Cost center copied over Profit center
Guys,
How can I copy the data introduced on the cost center side (either actual or planned: KB31n , KP46), to the profit center side (7KE5, 9KE5)?
I have both cost center assesment cycles (KSU5), and profit center assessment cycles (3KE5) and intend to use the SKF
Does the data have to be duplicated?
don't offer reward
KR - LoïHi,
There is a standard procedure of transfer of statistical key figures (1KEE). What's wrong with it? Also, you can activate real-time transfer for PCA, if you prefer.
Regards,
Eli -
Config issue: no data flow to profit center
Hello,
I'm on ECC6.0, and I'm trying to do a GL posting using FB50 to profit center and do an profit center assessment , but when I go to report KE5Z ( profit center actual line item report ), I don't see any value flow to the profit center. Due to this , my profit center assessment cycle is given warning message saying " cycle doesn't contains any senders" .
Are there any configure steps need to be done in order to let the data flow to profit center?
please advise.version should set to 1.
-
Assessment Cycle in Profit Center
Hi,
Need urgent help.
I'm running an Assessment Cycle for Profit Center but every time system does not select any sender or receiver.
Error message:
Cycle 8ATEST1, start date 20070401, does not include any senders.
Message no. GA749
Diagnosis
No senders were found for cycle 8ATEST1, starting date 20070401.
System Response
It is no longer possible to create receivers and assign senders for the segment.
Procedure
Check the definition of the cycle in the maintenance transaction for EC-PCA: Actual Assessment. No valid sender cost centers could be found to match your selection.
If you use the sender rules "Posted amounts" or "Posted quantities", check whether records exist in the database for the criteria you entered (cost element, version...)
During indirect activity allocation with the sender rule "posted quantities", you should also note that only the difference between the planned/posted activity allocation and the scheduled activity quantity is allocated. If you entered activity types as sender, you should at this point also check the activity type category. For those quantities posted with an activity type of category 1 (manual entry, manual allocation) no indirect activity allocation is possible.
1. If this is an allocation in the FI/FI-SL area, the problem could also be due to the inheritance logic for FI-SL totals tables, whose "Inheritance of sender based on the receiver" indicator is activated in the "Partner object update" view (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
Use transaction GCA8 to check this, and see the section on:
Inheritance Logic for Allocations
then correct the affected cycle, if required.
Pls help urgently.
Regards,
Vikas MalhotraHello ,
Did you double checked if any postings occurred to the respective profit centers in the cycle for that particular period you are executing??
Thanks,
Sai. -
User manual of Distribution & Assessment cycle in Profit Center Accouting
Hi,
Can anybody send me a user manual of Distribution & Assessment Cycle in Profit Center Cycle.
Regards
SandeepHi Sandeep,
the only one we can provide is in SAP Help Portal:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Best regards,
Andreas -
COPA assessment-reciever profit center
Hi there,
If in receiver of copa assessment cycle profit center being one of the receiver, will profit center get a debit and i will be able to see the cost in profit center/ or the segment consisting of profit center and other receiver will get a debit?
Thanks
DeepshikhaHi,
Here i will explain you clearly.
e.g Cost center 1000 and assgined to profit center 1000
and your assessing to profit center 2000
you booked actual cost $9000 to cost center 1000 and profit center 1000
when you assess the posting like this
Cr:$9000 to CC 1000 and PC1000
Dr:$9000 to PSG and PC2000
postings are going to be in PCA also.
Hope this helps you.
Thanks,
Rau -
How to transfer Receivable from Dummy Profit Center to CorrectProfit Center
Hi,
While creating Billing Document ,my receivables gor assigned to dummy profit center.
It is reflecting both in my FI Document line item and PCA document line item.
How should I transfer my Reconciliation accounts (Payables) from Dummy Profit Center to correct profit Center.I have quite large no of PCA documents and Reconciliation accounts.
Also,if I dont transfer what is the impact of this??
Thanks In advance
Payal SaxenaHello,
Please create PCA assessment cycles and transfer them to the relevant profit center.
3KE1 Create PCA Act Assessment Cycle
3KE5 Execute Act Assessment PCA
Regards,
Ravi -
Allocation of Profit Center actual postings
Hi all,
Have a question regarding on how to allocate the actual postings done to a profit center.
Are there any other methods aside from the assessment (3KE5) and distribution (4KE5).
Also, i have found a sap note that allows the creation of cycles (assessment, distribution, etc) without automatic creating the transport request. Is this safe? Have anybody tried using this?
Thank you all in advance
Regards, ErwinHi Erwin
1. CReation of the alloc cycles w/o TR is absolutely safe
You use this when you want to create cycles directly in production.. However, if you want to create and transport from DEV, then dont use it
2. Apart from Assemt and Distr, there is no other easy way to do this.... 9KE0 will frustrate you because it is manual
Regards
Ajay M -
Transfer of Customer balance from one profit center to another profit cente
Hi,
Actually we are working in SAP version 4.7, and now i want to transfer some accounting document from one profit center to another profit center like in a customer a/c lots of documents are showing in different profit balance and right now i want to change the profit center in some documents, pls advice how can we do the same in Detail if possible provide any user manual related to that.
Thanks & Regards
SandeepOnce again, this are you possibilities:
You can use the PCA allocations like 3KE5 (assessment) or 4KE5 (distribution) or the manual PCA posting trnsactions 9KE0 or 1KEL.
If you speak about cost element accounts that are assigned to real account assignment objects and you have changed the assignment of the profitcenter to the CO-object (like in the cost center master data, WBS element, internal order master data and so on) you can repost the respective accounting document into PCA. Please have a look in SAP note 858363 for more information regarding that.
Best regards,
Andreas -
Transfer of amount from one profit center to another profit center
Dear Gurus,
1. We want to transfer amount from one profit center to another profit center, wrongly posted how to do this? what is the t code for this?
2. We developed on drill down report report painter, newly we have added one profit center in that report but values are not picking in that report how to map it? Please help me
Pls advice me for the above said issues as we are nearing the year end pls help me.
Regards
JayaHi..
1."We want to transfer amount from one profit center to another profit center, wrongly posted how to do this? what is the t code for this?"
Ans: You can transfer through Assessment Cycle or Distribution cycle
a) Creat Assess cycle 3KE1 and Execute in 3KE5
b) Creat Dist cycle in 4KE1 and execute in 4KE5
2. "We developed on drill down report report painter, newly we have added one profit center in that report but values are not picking in that report how to map it? Please help me"
Ans: Goto KE82 and select your report . In selection charac include new profit centre in profit centre group used in your report.
kkumar -
Profit center wise balancesheet & p&l
Hi SAP GURUS,
Currently all items are recorded in single profit center. Company now want to create more profit center and split the current amount of all accounts in the profit centers. How I can transfer the profit center amount from one to other when GL Account balance should not change? And how can I check bs & p&l for profit centerwise balancesheet.
Thanks in advance
CHEERSHello,
For distributing the items from one profit center to the other create assessment cycles 3KE5.
You can the similar financial statement like in FI. For that you need to first of all create the accounts from FI to PCA by using KE5B.
In KE80, there are various profit center balance sheet & P&L reports are available. Check which one suits your requirement.
Regards,
Ravi -
GL Balances transfer to dummy profit center
HI SAP Experts,
How to transfer the GL Balances of profit center to dummy profit center, I tried throuh t/code:9ke0 , in which i have given all the parameters after posted this tranaction document has been generated.
But amount has not been reduced GL account, Please give me advise regarding this.
Regards,
PrabhakarHi,
Transfer within PCA - from 1 PC to Dummy PC
- Use Distribution/Assessment Cycles 3KE5/4KE5
- this would not reduce Gl balance; happens in PCA module only
Transfer within FI - from 1 PC to Dummy PC
- post a new journal with correct PC assignemtn
- this would reduce the gl balance
Rgds. -
Secondary Cost Element Values doesn't display in Profit Center Report
Hi everyone,
I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
but it also might be that the reconciliation is done between different CC and same PC
- check your CC organisation asignment
- if sender cost center and receiver cost center have tha same PC it is probably the reason
- I had that problem my self and didn't solve it
cheers
matej
Maybe you are looking for
-
Hello there. So my mom got a mac book a while back, and when I purchased my iphone 4 a few years ago I "synched" It to my moms computer, it was perfect I could download songs, movies, etc.But now i have my own laptop! (Macbook air mini) and ive been
-
How to embed reports in an email using Scheduler
Hi all, I am using the "schedule" option in a webi report to deliver a report through email in pdf format. However, our end users want the report data to be embedded in an email rather than as an attachment. We are using BO XI 3.1. I tried searching
-
Hi, I switched on my Mac Pro today (after using it yesterday) and it won't start; no starting chime or anything. All I have is the status light above the ON switch is flashing continuously; there is no pattern to the flashing as suggested in the use
-
We are upgrading to ECC 6.0 / BI 7.0 and need to know if solman 3.2 will continue to work OK with these systems? or do we need to upgrade to 4.0..? thanks, Linwood
-
How can I generate a smooth continuous sine wave
I am trying to build a single frequency active noise control system to control a tonal acoustic disturbance. In order to do this I need to be able to drive a set of loudspeakers with a single frequency waveform which will be continuously adapting at