Profit center change in FB01

Hi,
when i do posting in FB01:
For first line item for GL a/c - 'GX' profit centre 'PC1' and for second line item GL a/c - 'GY' profit center 'PC2'. After posting for GL account GY profit center automatically changing to 'PC1' of first line item.
this is happening for only G/L account GY account and not for others. Directly it is picking from first line item
I've seen the substition rules and Customer exits and they won't have any effect on this.
Our Fucn Consultant telling there is no config for this modifcation.
While in debugging, I am able to see the change is happend to XBSEG-PRCTR for second line item from PC2 to PC1 of first line item.
THis has happened at following form of SAPMF05A.
MF05AFF0_FCODE_BEARBEITUNG_BU_BS.
Can any one tell me reason for this behavior and how to rectify the same..
Your help would be greatly appreciated
Thanks
pra
Edited by: Praneet on Dec 21, 2007 11:09 AM

Hello Saint,
Once the document posted you can not change the profit center, there are two options are available
1) Reverse the original document and post new document with correct profit center.
2) Post the document in profit center using 9KE0.
Regards
Rama Krishna

Similar Messages

  • Cost Center,Profit Center Changes

    Hi Experts,
    Is there any report for getting cost center,profit center changes log.What are tables for getting same.
    Please suggest.
    Regards,
    Kaustubh.

    Hi,
    Go to header Environment -> Change Documents -> for fields and for cost centres.
    there you can check the changes.
    Regards,
    Padma

  • Profit center change is  material master issue in EHP7

    Hi,
    we are facing issue in materail master  profit center  change .recently upgared with ehp7 after this upgarde its not allowing to change in materail master.
    i have alternative solution for this is t code OMT4 i can change message type E to W .
    But my old version its allowing even though OMT4 having Message E
    Please anybody help on  this
    Regards
    Vinod

    Hi Vinod,
    Did you find any solution for your issue?
    We need to do some mass update of profit center for a big chunk of our materials by this Dec.
    Last time we tried changing the profit center we faced error MM326.
    Is there an SAP note or some other solution that can be used for this case?
    Thanks
    Akash

  • Profit Center Changing Problems

    Hi,
    I want to give the profit center though it was not assigned at the time creation of material master.So if i want to give the profit center in MM02 it is showing the error "the Stock is already available".
    So please help me out.if there is any procedure to give the profit center in MM02.
    Thanks

    if the message is an error message, then your controllers should be lucky.
    Keep them lucky and remove the stock first, then change profit center, then enter stock again.
    If you dont follow this way, then you create inconsistencies in profit center accounting.
    Because...you received your stock without profit center (actually it is a certain default profit center), if you then change the PC in your material, then each issue will be posted to the new PC, while it never had a receipt.

  • Profit center change on contract

    Hello all,
    I wuld like to change contract master data : profit centers are incorrect.
    But if invoicing has been made, it is impossible to change this value, even if invoice cancellation has been performed.
    What may I do ?

    im not sure but u can give a try to change the profite center at item level in sales order n do the billing again.
    before doing this go2 OKB9 and maintain profit center.
    Plz do inform me it works or not?
    Reg.
    Jess

  • Internal order profit center change

    Hi sap gurus,
        I want change the internal order profit center but when iam changing the profit center the below message is coming
    You changed the profit center; see long text
    Message no. KO367
    Diagnosis
    You have changed the profit center from 1110-P to 1610-P. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore.
    Procedure
    If you want to make it possible to change the profit center, you should change this message from an error message into a warning. To do this choose Adjust message control (Application area "KO", message number "367").
    When you change the profit center, the last period should be settled and since then no more postings should have been made.
    Notes
    Order values can already have been updated on the profit center you are assigning to. For the new assignment, only the new order values on the profit center you are now assigning to are posted.
    If an order is assigned to a profit center and the "Integrated Planning" indicator is set, plan costs can be updated in the future on the old profit center.

    Hi,
    Changing profit centre assignment to internal order has certain consequences, which are partially listed in the message. So, the system gives you a choice to forbid this kind of action or allow by making the message only a warning. If you want to do so, go to OBA5 transaction, enter the 'KO' as application area and change the parameters for 367 message.
    Regards,
    Eli

  • Profit Center change from 2007 to 2008 in basic data of WBS elements??

    Dear all,
    I am quite desperate - we change the complete CO structure from 2007 to 2008 and I have to reallocate all projects (WBS elements and networks) to new profit centers.
    The profit centers are valid as of 1/1/2008 - the old one finish 31/12/2007.
    The problem is that the annual closing procedure is done with Actual Results Analysis since we are working with the POC-method for revenue recognition - and I will only do this transaction in 10 days.
    If I cannot limit the profit center allocation, I do not know how to avoid that either 2008 postings will be on 2007 profit centers for the first automatic MIGO bookings 2008 or the the last 2007 bookings will be on 2008 profit centers.
    Can anyone help on this? Please mail to [email protected]
    Thank you already!
    Bye
    Anne

    Hi,
    I would like to add few more lines on this. There can't be multiple controlling area in a project whereas there can be multiple company code for a project. To change controlling area at WBSE level, the controlling area of the project need to be changed. After financial posting into project, it will be difficult to change the controlling area / co code / plant etc. in project structure.
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • Profit center change

    Dear PS Gurus
    Our scenario is PS centric where projects are used as cost and revenue buckets. We are selling service in terms of consultant hrs to our clients which are tracked through time bookings in Projects.The Sales order and billing is based upon resource related billing. Similiarly, We maintain profit centers in projects at WBs level and reporting is based upon PCA.
    Business new requirements are forcing is to change Cost center/Profit Center hierarchy. We have already thousands of on going projects in system with old profit centers. If profit center hierachy is going to be changed then does it mean that we need create all projects newly and plug the new profit centers or we can replace old profit centers by new one.If we opt the second option then what are the consequences of this change and what is possible way out to counter the change?
    Best Regards
    Adwait A Deshpande

    Dear Sudhir
    Thanks for your reply. But what about cost center change since planned cost does not flow from old to new cost centers. Pl confirm if really there is any other consequence of CC/PC change or not?
    Best Regards
    Adwait

  • Profit Center change in Sales Order by Profit Center reorganization

    Dear FI gurus
    I have requirement to change profit center in sales order in mass.
    I heard in EhP5, there is function called "Profit Center Reorganization".
    For my requirement, this function can be used?
    If not, what is this functionality?
    Yoshi

    Hi ,
    Please se below docuemnt on thos
    http://help.sap.com/erp2005_ehp_05/helpdata/en/39/afe8e13f1d42c8a34d625f677bee66/frameset.htm
    Many Thanks

  • Profit center change in posted accounting document

    Hello,
    please, is it possible to change the profit center in already posted accounting document?
    We DTO'd open customer balance with wrong profit center. PC document has been created as well. Please, what is the proper way to change the PC?? Or how to proceed?
    Thanks a lot
    Kind regards
    Marcela

    It is not possible to change profit center, for that matter any other CO assignment cannot be changed. You can try transfering to correct profit center through 9ke0

  • Profit center change during FI doc posting

    Hi,
    When posting an FI document (the FM uses RFBIBL00), the profit center gets changed when the document gets posted.
    The Program crestes a session, If seen in the session, the screen value for profit center is different than the one thats present in the posted document.
    Is there any configuration setting that changes it?? if so, please tell me which one??
    Regards,
    IceMan

    Hi the profit centre can be changed a lot of different places – so there’s is not an easy answer to you question!
    In order to find the exact location of the change will you have to debug the posting!
    Use transaction GGB1 in the area “Financial Accounting” open “Line Item” and select the first available substitution (you MUST mark it before you proceed).
    From the menu select “Extras – Activate Total Trace”. You will now leave TA GGB1 but you will STAY IN THE SAME session and you will now do the posting that will post on the “wrong profit centre” – do not switch to another session.
    When you save/enter new lines will the debugger pop up every time a call to a substitution is called!
    You will now have to analyze all this combinations – happy hunting

  • MDG-F 7.0 GL, cost center, profit center change history in ECC

    I am working in an MDG-F 7.0 workshop and am primarily working on cost center, profit center and GL account.
    I have come to realize that all field attribute changes made to cost center and profit center that are initiated from MDG-F won't be updated in ECC change history tables therefore i loose the ability to look up the change history in ECC but in MDG-F.
    However ECC history table is udpated for GL account attribute changes initated from MDG-F.
    Do everyone have the same understanding as I do? Please let me know if you see something else.
    Thanks,
    LUO

    Hi Luo
    It is available on Financial Contolling Goverance cost center under Search sub area.
    Here you have to select respective object and after searching result you can find there is link with aready existing master data objects.
    You can click on the link to open respective object. Here you can edit and change as per your wish

  • Profit center change in product cost collector

    Hi All,
    I would like to know what precautions we should take for mass changes of profit center corrections in the "Product Cost Collector".
    I want to make  same profit centers in material master and in product cost collector for that we need some  report on "Product Cost Collector" or table name so that we may compare the profit center in material master and Product cost collector in order to make them in sink.
    Regads,
    Raj

    Hi All,
    My query is from which T-code of product cost collector or any table by i get matrial and profit center combination.
    Also i would like to know any precaution if any change of profit center in material master for product cost collector (privious is X cost center and now i am changing to say Y).
    Regds,
    Raj
    Edited by: RBS123 on Jul 15, 2009 8:24 AM

  • Impact Analysis: Business Area, Profit Center changed for Sales Order type

    Hi All,
    Can you please let me know the impact of changing the Business Area and Profit Center for Sales Order Document types.
    Scenario:
    Let's say that sales document type ZOR has been used for sometime. On this document x number of sales orders have been raised, delivered and invoiced over the years.
    Now, if you change the Business Area and Profit Center what would be the business impact.
    thanks,

    Hi,
    First of all itu2019s not a good business practice to change the Business area and Profit Centre.
    However if at all l you change the Business area and Profit centre the following is the impact::
    Business Area: effects the sales order in accounts assignment at Header level.
    Profit centre: effects the accounting part at Item level
    Overall in MIS reporting w.r.t Profit and Business Analysis in Finance will be affected.
    Thanks and regards
    DSR

  • Change document in profit center change

    Hi guyz,
    I have created an upload program for 'change profit center' KE52 transaction.  I have used 'BAPI_PROFITCENTER_CHANGE' for this. Everything works fine, but the problem is on the history tab, when I track the history it's not displaying any change data, when i use this program to change profit center.
    So i need the track the change documents also. Can any body tell me how to resolve it. Should i use any bapi for change docs. Any suggestion?
    Thanks,

    BAPI_PROFITCENTER_CHANGE calls PROFITCENTER_CHANGE and inside this function module, change documents are created (see below).
            PERFORM profitcenter_save   USING    prctr_data-prctr
                                                 prctr_data-kokrs
                                        CHANGING gl_rc.
    Inside this perform, you will find this
    * write change documents
      PERFORM change_documents_prepare.
      PERFORM change_documents_save USING lt_ccodes[]
                                          profitcenter
                                          controllingarea.
    Check in debugging why it is not coming here. Also, make sure you have commit work after the call to this function module is successful.

Maybe you are looking for