Profit center for Open items
Hi,
We have a stanndard report for customer evaluation is 'RFDOPR00'.This report is working based on company code level.
But our client needs a custom report which should work based on Profit center.
for that I have created a report for customer evaluation taking profit center value from BSID table. But in this table no PRCTR value filled except 0099990000.
So in this case, how can we get profit center value to make a report.
Kindly provide me a solution for this...
Thank you!!!
Regards,
Anilkumar.G
Hi,
Thanks for your replies...
Actually the standard report program is using LDB 'DDF' and inside source code we have PRCTR. But not able to find the table name (which are having open items) where PRCTR value will be available..
Regards,
Anilkumar.G
Similar Messages
-
Profit center wise open item clearing ??
Dear all
Can i do profit center wise open item clear of customer ???
I select profit center in F-32 ( Customer Open Item Clear ) . But not coming profit center in this colomn .
Becouse my scenario in incoming payment product wise (profit center ) & credit limit on profit center.so i not an able to do this clearing .
Please assist me .
Regards.
Purushottam BawaneHI,
When you are run f-32 t.code after that u are select the ( other option menu) Profit Centre wise.
ok than click and run the option.
thanks
rohit agrawal -
One or more profit center for document
Hi guru,
is there in profit center customizing something where I can decide if, for a document, it is possible posting one or more profit center? More precisely, is it possible to set from customizing if in a document there must be only one profit center for all item?
Thanks
RegardsHi,
Do you mean to say that you want to verify that within one documents all document items have the same profit centre? In this case, you can build a validation via OB28.
Regards,
Eli -
Profit Center for Vendor/Customer line item in F-02
hi all,
We have implemented SAP ECC 6.
At the time of vendor line item posting, there is no input field for profit center.
Can anyone please tell the way out for Profit Center field pop up in case of t-code like f-02 for vendors & customers
AbhishekPlease note the following:
- On FBL5N and alike customer/vendor line item reports you won't find
the field profit center filled; hence you can't directly input it during document entry (as pre-mentioned)
and the profit center for customer/vendor gets inherited (as of document splitting functionality) from the document other line item(s) (according to the defined document splitting rules...)
- Yet you can use the below reports (with New G/L.) to get the customer/vendor line items wise reporting over a profit center (i.e. unlike FBL5N & showing the inherited customer/vendor profit center in the G/L. view)
S_AC0_52000887 - Line Items->Open Items->Receivables: Profit Center
S_AC0_52000888- Line Items->Open Items->Payables: Profit Center
In both reports you can use:
"Custom Selections" -Dynamic Selections Icon- enabling you to filter the output according to
a. Customer line items specific data entered within the posted document(s)
b. General ledger items of the G/L. view of the posted document(s)
& the "Output type" includes like most of the New G/L. Reports:
- Graphical report output
- Classical drill-down report
- Object list (more than one lead column) -
AFAB:Balancing field "Profit Center" in line item for Single Company
Balancing field "Profit Center" in line item 005 not filled , This Error is coming for only one company code Alone in AFAB Tcode
Thanks & Regards,
DanielCheck this T.code OBC4.Here you need to check the field status group G001,G005.which Field status is using for the GL
U have to write substitution for T code J2IUN and Plant combition .
Eg.whenT code is J2IUN and Plant is XXXX Profit center is YYYYY.
please check the same and then execute further your process.
Regards
Ketan -
Change profit center for accounting document on item line
HI
I need to change profit center for accounting document on item line, for that purpose I have used user-exit EXIT_SAPLV60B_004, but my new profit center gets latly overwritten in FM CO_DOCUMENT_CHECK (which is called from FM AC_DOCUMENT_CREATE). It gets overwritten from COBL. Is there any way to solve this?HI,
possible reasons are :
In GR document profit center pulled from PO Material :
If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
If you have ordered without material code, than check cost center assigned Profit center by 1KE4 -
Substitution for profit center for credit line item
Hi
There is some common material sold in two segments. (Example head phone is sold from cell phone segment and computer segment). These segments are created as a division also for SD purpose.
Now for determining the profit center, i am using the validation rule. Logic: if the division in sales order is cell phone, entry should be posted in cell phone division. So my revenue and PGI will be in cell phone segment.
When head phone was procured, it was procured in computer segment (division). So my inventory credit should be the posted to computer segment (via profit center) and consumption should be posted to cell phone division (for matching with revenue). Hence i want some substitution rule for posting to two different profit center ( or segments, determined by profit center) at the time of PGI. Debit (consumption) should be to the profit center for cell phone and credit (inventory posting) should be to profit for computer.
Please help.
Edited by: Meenu_ND on Jun 23, 2011 8:02 PMHi
In an ideal scenario, profit center is derived from material master. Since, your business is such that profit center is nto known as unique for a material master, try using the following BADI to derive profit center at the time of Goods movement document. You should not maintain profit center in material master in such a case.
MB_MIGO_ITEM_BADI
MB_MIGO_BADI
Regards
Sanil Bhandari -
Open profit center for reconciliation account
Hi experts
I need to display the field profit center for reconciliation account and I check Field Status Group (OBC4 & OB41). The field Profit center is mandatory.The new legder is not activate
But when I use the FB01 , the profit center is not available
So It s possible to display the field Profit center for reconciliation account without the New Ledger ??
Thanks for your helpHi
If you are referring to Asset Recon account - You can not enter any Pr Ctr manually in it...
Just ensure
1. Cost Center is maintained in Asset master
2. Maintain KOSTL in T code ACSET for Acq Posting and transaction type *
3. Create APC account as Statistical cost element
Whether New GL or not, PC in Asset recon a/c depends on these settings.... You cant enter it manually in the APC acount
Regards
Ajay M -
Profit center - actual line items report
< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
hi,
i am trying to excute ke5z, profit center actual line item report. it does not show any values even if i am running it wide open, I am testing this in our quality client, we have data all of 2008 posting to profit centers. i
is there some kind of config involved in this.
please let me know if anyone has an idea.
thanks.Are you absolutely sure there are no values in any of the fields in selection screen? Recheck if any of the multiple selections (arrow at the end of each field) is active? Are you running it for record type 0 (actual) - you did say you are running it wide open, but I am just trying to reconfirm.
Just another think that you could check - when you are in the initial screen of KE5Z, go to Extras -> Data source (F5) from the top menu and make sure Database checkbox is checked.
Edited by: Srikanth Tamma on Sep 22, 2008 6:46 PM -
Balancing field "Profit Center" in line item 001 not filled
When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
Thanks in advance.Hi Kiran,
Could you tell me how you are able to resolve this issue as we are having the same issue.
Did you use the substitution rule?
Please let us know.
Thanks,
Madu -
Bal field "Profit Center" in line item 001 not filled at the time of F-53
We are in ECC6
I have posted a vendor document. The entry is shown as under.
GL CC PC Segment
Dr Expense GL-1 RV01 RGV1 Hyderabad
Dr Expense GL-2 RV02 RGV2 Mumbai
Cr Vednor a/c
but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
I have check ed the configuration setting in this regard. Zero balance, mandatory fields for profit center and segement check box is enabled. And also the inheratence check box is also enabled.
Pls suggest soulution soon for the above problem.Hi,
Try to default the profit center in FAGL3KEH for the Bank account and try posting.
In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
Try to assign a default profit center and check.
Regards
Hari -
Difference in Profit center for GR/IR account in MIGO & MIRO Transaction
1) We have created material 106267 with material type ROH. We have assigned profit center 1001052999 (common profit center) to material.
2) We have created WBS element MUM-RIV002.SS.RC.RF with profit center 1001052002.
3) We have created PO 4000000236 for account assignment category u2018Qu2019 for the above material with WBS element MUM-RIV002.SS.RC.RF . After posting GRN for PO 4000000236 we have identified that for GR/IR account profit center is taken from material master & for stock account profit center is taken from WBS element.
Please find the below Flow
In MIGO
Entry
Accounting Document number in Entry View
5000001125
PSKY G/L Code Description
Amount
Curr.
Profit Center
WBS element
89 231101 RAW MATERIAL STOCK 2,000.00 INR 1001052002 MUM-RIV002.SS.RC.RF
96 162101 GR/IR-Material -2,000.00 INR 1001052999 MUM-RIV002.SS.RC.RF
Document number in Ledger View
L.item PK SG Account Description Amount Curr. Tx Profit Ctr WBS element
1 89 231101 RAW MATERIAL STOCK 2,000.00 INR 1001052002 MUM-RIV002.SS.RC.RF
2 96 162101 GR/IR-Material -2,000.00 INR 1001052999 MUM-RIV002.SS.RC.RF
3 50 162001 InterSegment Clrg -2,000.00 INR 1001052002
4 40 162001 InterSegment Clrg 2,000.00 INR 1001052999
It should take profit center from WBS element for GR/IR account & Stock account but for GR/IR account profit center is taking form material master & for stock account profit center is taking from WBS element.
MIRO
Entry
Accounting Document number Entry View
5100000657
PK SG Account Description Amount Curr. Tx Profit Ctr WBS element
31 100000 Ambuja Cement Ltd -1,996.00 INR V4
86 162101 GR/IR-Material 2,000.00 INR V4 1001052002 MUM-RIV002.SS.RC.RF
40 254001 VAT Receivable 80 INR V4
50 172103 TDS PAYABLE -194C -42 INR
50 176101 WCT-TDS payable -42 INR
Document number in Ledger View
PK SG Account Description Amount Curr. Tx Profit Ctr WBS element
31 160100 CRS-Domestic Supp -1,996.00 INR V4 1001052002
86 162101 GR/IR-Material 2,000.00 INR V4 1001052002 MUM-RIV002.SS.RC.RF
40 254001 VAT Receivable 80 INR V4 1001052002
50 172103 TDS PAYABLE -194C -42 INR 1001052002
50 176101 WCT-TDS payable -42 INR 1001052002
In the MIRO Accounting Document profit center for [162101] GR/IR-Material A/C has taken from WBS element
Please note that we are using document splitting with Profit center is mandatory
We have created same scenario for Cost center. After posting the GRN profit center is taken from cost center for both GR/IR account in MIGO & MIRO accounting documents.
Plez helpHello
ANy suggestion for question & if solved do let me know -
Posting to FI error *Balancing field "Profit Center" in line item 001*
Hi Gurus,
I have been posting my payroll results to FI accounts and CO (internal order).
I executed the following transactions:
1) PC00_M99_CIPE - Create Posting Run
following are the results of generated document and its a successful run:
17.01.2009 Posting Document
Run 0000000051
Company Code 2000
Document 0000000011
PostingCurrency SAR
Reference XXXXX00001
Doc. Type AB
Run Type PP
Posting Date 31.01.2009
Document Type G/L Account Document
Document Date 31.01.2009
Bus. Transaction HRP1
Account Number with Text PTyp CO Accnt A Debit Amount Credit Amount
55000000 Dir Sal/wag bonus G/L OrdNo 100000 6,495
13113000 "Salary, wage pybl" G/L 6,495 SAR
Posting document 0000000011 6,495 6,495 SAR
17.01.2009 Posting Document
Total of All Documents
Account Number with Text PTyp CO Accnt A Debit Amount Credit Amount Crcy
6,495 6,495 SAR
2) PC00_M99_PPM - Generate Posting Run for Payments
when I have run above mentioned transaction
I am getting the following error:
Messages for Document 0000000012
Error in document: HRPAY 0000000012 SNDCLNT101
Balancing field "Profit Center" in line item 001 not filled
I would really appreciate a valuable suggestion .
Thanks in Advance !!
KPJHi KPJ,
I am also facing same problem please tell me the solution.
Please give me the reply.
Regards,
Leelaprasad.A -
T-code: F-02 (Balancing field "Profit Center" in line item 001 not filled)
Dear Experts,
I am getting following error while i am doing transfer by using t-code F-02.
"Quote
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
u2022 No value can be derived for this field from the current document data.
u2022 You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Unquote"
Where do you thing the mistake is and what i have to do? Please resolve my problem.
Thanks advance,
Best Regards.
Ripon Kumar PaulHi
Balance Sheet Accounts are required to be split in case you have document splitting activated u2026.. and in your case the profit center is made mandatory for the documents to get splitted u2026.. and the profit center would be derived from cost centeru2026u2026u2026. therefore to split the document by using document type u2013 SA through F-02 we need to do further settings, i.e., you need to configure u201CExtended Document Splitting Configurationu201D
For example: Rent expenditure is been posted which is having more than 2 Debits and consisting of different Cost Centers and posting to Rent Payable A/c which is a Balance sheet A/cu2026u2026.
Path: Financial Accounting (New) - - General Ledger Accounting (New) - - Business Transactions - - Document Splitting - - Extended Document Splitting -- Define Document Splitting Rule
Define your Business Transaction variant and for that variant define document splitting rule u2026u2026u2026.. where in you need to activate Automatically split check box for the desired categories.
Regards,
Sathish -
Balancing field "Profit Center" in line item 002 not filled and VF02
Dear All,
Below mentioned error we got in VF02 while releasing the billing to Accounting document.
In this case SO has created. Later with out delivery has been created Billing ( VF01) And Later Releasing through VF02 ( For only 1 specific Billing type )
But we have CRM Integration also from CRM 7.0 TO ECC 5.0 ( New GL Is there in ECC 5.0)
Here alternative solution is there i.e In OKKP T code if we deselect Profit center Button Issue will be resolved from SD side ( PC Issue )
Then problem will come to CRM with another message as ( Account-based PCA not active in year 2011 in controlling area 1001 (Notification I KM 029) Message no. CRM_ORDER_MISC 060)
Balancing field "Profit Center" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 002, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Please help on same.Hi
If i am selecting that indicator in 0KE5 Problem will be resolved in CRM.
But VF02 Is getting this Balancing field "Profit Center" in line item 002 not filled problem.
With out selecting that indicator please suggest. From Last 5 years we are using this Production System.
0KE5 indicator has not selected from 2005 to 2011 also.
CRM Is is process. we have selected in QA, But problm occurs to VF01 and CRM Process.
Simply if i select 0KE5 CRM problm will resolved.
Later SD Problem will come into the pictute.
Note: In PD1 System we hav not selected for 2011 also.
Pls put more inputs.
Maybe you are looking for
-
HI sir, i got a problem while using oracle 11g,where it is asking username
I installed Oracle11g R1 DB version 11.1.0.6 and upgraded it to 11.1.0.7 using patch set 6890831 .After that i wantd to use SQL * plus,but it is asking username & passwords. But while installing it didn't ask for any usernames ,so i tried all default
-
Hi Friends I have a Question that I re determined pricing condition type Pr00 but it showing in Transaction Code vk11 only not showing in vk31 and if enter in vk31 manually the error is coming that the table 304 is not defined for this conditi
-
How can i access properties from APP server through JNLP with ot using JAR
Hello i want to retrive a Properties file from WL-7 app installed location like :bea/home/externalized.properties now i want to use this properties file throgh out the application. if any property is changed in "externalized.properties" that could be
-
I am on the CIMC and when I select Launch KVM Console, I get a pop up a Do you want to continue ? I select Continue It goes to starting application, Verifying application. ( takes about a minute ) then pops up a Do you want to run this applicatio
-
please help