Profit Center Planning and CO-PA

Dear All,
We are using Both Profit Center Planning and CO-PA ,it is possible to lead over the planned data, turnover and mat. costs, from CO-PA to the profit center accounting. Therefore it is necessary to maintain a transfer scheme in the customization of COPCA and to assign value fields of CO-PA to the relevant accounts of COPCA.
So can anyone guide me how to do this..
Thanks.

Hi
Yes you can transfer the planning data from COPA to ECPCA. You can do the configuration at
SPRO->Controlling->Profitability Analysys->Planning->Integrated Planning->Set up transfer of planning data to ECPCA/FIGL
Then you can use TCode KE1V to transfer the planning data.
Regards,
Suraj
Edited by: Suraj Ramamurthy on Nov 13, 2008 1:59 PM

Similar Messages

  • Profit Center Planning and Retraction

    Hi Experts,
               I need to do Profit Center Planning in BPS. On top of that I will need to send the data back to R/3 (retraction). Is there any sandard procedure for it. I looked for it I couldnt find any standard retractor form PC Planning.
    Can you pls help
    Thanks and Regards,
    Praful

    HI,
    Take a look at the threads below :
    Re: Profit Center Accounting Retraction
    Re: Profit Center planning in BPS -- docs?
    Hope that helps
    Cheers,
    Kedar

  • Profit Center Planning PCP

    Hi All
    What exactly is Profit center planning and how is it implemented in BW. I know few things about PCA and I know the cubes and datasources for this, but I am unable to find anything for PCP. I tried SDN as well as help.sap.com
    Can you guide me in the right direction.If anyone wants to forward any documents my email is [email protected]
    Thanks for your help in advance and point will assigned !

    Thanks for giving ur valuable time for reading my blogs:)
    You can use PCA Datasources directly, just by replicating them.
    Check the below link to know more about delta's with PCA datasources:
    http://help.sap.com/saphelp_nw04/helpdata/en/de/46663758459166e10000009b38f8cf/content.htm
    Hope you have already checked BI COntent realted to it:
    http://help.sap.com/saphelp_nw04/helpdata/en/4b/82453ff168e07fe10000000a114084/content.htm

  • Cost Center and Profit Center Planning

    Hi,
    I have one  Co issue.  Pls Suggest me the wiseful solution.
    Cost Center and Profit Center Planning.
    For F-2008 Planning  data they have updated in the month of Aug, 07 for Profit and Loss Items and they have revised the plan data of some cost elements in the month of oct, 2007 (say 5% Increas).  when comparing the cost center report to profit center report, both are not matching.  the reason when i see and reconcile the document nos and values in between cost center and profit center reports  i found out that there are some documents are missing in the profit center report. 
    wherever plan data had revised e.g for cost element Salaries they have updated 100000 Planning cost in the month of Aug, 07.  In the month of Oct, 07 increased 5% i.e.5000. In cost center line items details i found 2 documents for Rs.100000/- and Rs.5000/-  But in Profit Center Line Items i am getting only Rs.5000/- Value Document.
    Note.  As and when KP06 Plan data has been updated Profit Center line items are generating.  It is not necessary to run any programme inorder to transfer Plan Data from cost center to profit center.
    Observations From My Side:-
    I tried to run the transaction code 1ke0. i have selected the cost object is Cost Center, version and had given Cost Center Parameter in development and quality clients and executed the same.By this time already existing data either deleting/ riversing and creating new documents fully except manually changed data in profit center through 7ke1.
    My Question is
    1.Upto what extent it will work.
    2.will it be possible to transfer data from cost center to profit center only missing documents which are available in cost center, without disturbing of existing data in profit center.
    3.suppose if i done this activity, there are some data which was already transferred from other cost objects like internatl orders & wbs elements to Profit Center. will the data get disturbed (deleted/riversed).
    Pls suggest me the wiseful way to solve the

    Hi
    Try This
    BAPI_COSTCENTER_CREATEMULTIPLE
    BAPI_COSTCENTERGROUP_CREATE
    BAPI_PROFITCENTER_CREATE
    BAPI_PROFITCENTERGRP_CREATE.
    Regards,
    V.balaji
    Reward if usefull

  • Difference in Profit Center Document and CO-PA Document

    Hi,
    We are getting difference in Profit Center Document and CO-PA Document Cancelled Sales Invoice.
    Sales Accounts GL:
    Profit Center Document amount in Sales Accounts GL: 558095.04
    CO-PA amount in Sales Accounts GL: 558095.15
    In Sales Invoice, Exchange Rate is maintained as 7.75132
    Invoice Amount is 72000 USD. So the Amount calculated should be 558095.04.
    In Accounting Document the Amount posted as 558095.15 for the GL Sales Account.
    But in Cancelled Sales Invoice, Amount posted is  558095.04 in GL Sales Account.
    So Profit Center Document is picking the Amount 558095.04, but CO-PA document is picking wrong amount i.e from Sales Invoice and not from Cancelled Invoice.
    Please help me to understand why Co-PA Document is fetching amount from Sales Invoice and not Cancelled Invoice.
    Also why there is difference in Sales Order Invoice and Cancelled Sales Oder invoice Amount.
    Regards,
    Debashri Dutta

    Hi
    Yes you can transfer the planning data from COPA to ECPCA. You can do the configuration at
    SPRO->Controlling->Profitability Analysys->Planning->Integrated Planning->Set up transfer of planning data to ECPCA/FIGL
    Then you can use TCode KE1V to transfer the planning data.
    Regards,
    Suraj
    Edited by: Suraj Ramamurthy on Nov 13, 2008 1:59 PM

  • Reverse cost center & profit center plan data

    Hi ,
    Any one can tell how to reverse the cost center and profit center plan data. We have loaded plan data for 2010 there are some correction we want to reverse the posted data and reload the plan values.
    Thanks
    Pacers

    Hi
    Simply reload the new values.. They will get replaced....
    If you have uploaded values to some cost ele, which should be zero actually, simply upload them zero value
    Regards
    Ajay M

  • Layout for profit center planning

    Hi
    Which layout will be used for profit center planning upload.any help on this.
    Thanks
    Lily

    Hi
    I tried the same layout,after getting file upload error message only,i posted in the forum,have u tried with that layout 8A-111,Any way last time you mentioned that
    u can use import file directory to upload multiple cost center planning by putting all in one folder,i tried but it is not able to,when i tried using that option still it is able to post one excel sheet only,do i need to assign path in different way or am i missing something,i already assigned points without testing and so can you tell me how to proceed from that import file directory,since it accepts only .TXT files.
    C:\Documents and Settings\lilysg\Desktop\CCA (CCA is folder name)after this i need  how to proceed.
    See below your message
    Hi,
    Since you have 500 cost center and one excel file contains one cost center and multiple cost element, in that case you will having 500 excel files. To upload all the file at at time, pull all the excel files in single folder. Use T.Code: KP06 and select Excel Planning Upload under extras under the menu bar. Instead of selecting import single file, select import file directory. mention the path of the folder instead of giving path of the file and then execute.
    Hope this helps.
    pls assign points to say thanks.

  • Bapi for profit center planning

    In our project we are using New GL concept and we are doing profit center planning through GP12N
    my requirement is need remote function module or BAPI to do same profit center planning.please give me any solution

    Hi,
        You can try with the below.
    BAPI_PDTRANSCO_POSTKEYFIGURE
    BAPI_PDTRANSCO_POSTACTINPUT
    BAPI_ACT_INPUT_CHECK_AND_POST
    BAPI_ACT_PRICE_CHECK_AND_POST
    <b><REMOVED BY MODERATOR></b>
    Thanks,
    Srinivas
    Message was edited by:
            Alvaro Tejada Galindo

  • Wrong distribution key in profit center planning 7KE1

    I have entered the profit center budget in Transaction 7KE1 for profit centet and account using appropriate profile and layout. 
    The distribution key appearing is "2" however the cost distribution is as per distribution key "1" (equal distribution).   Even we tried to change the distribution key from 2 to 1, sap is not saving this changes and shows "2".
    Following is our profile configuration"
    Planning Area            currency distribution key    Qty distribution key             Doc type
    Costs/Revenue                            01                                   01                               PO 
    Statistical Key Figures                 02                                   02                               PO 
    Inventories                                   02                                   02                               PO 
    Distribution key filed is there in planning layout. There is no other place default distribution key.  Overwrite field is selected in layout.
    Please send reply why this is happening.
    Thanks,
    abhay

    Hello,
    The following example is given for cost center planning. However, you can go to Profit Center ==> Planning. Remaining are same except 7KE1. If you configure in this way, you can upload the plan data through excel for profit center.
    This is controlled by planning are in your planning profile. You need to use "Cost ctrs: Cost element/activity inputs" planning area for this purpose.
    Hope you are conversant with Integrated excel upload.
    To do integrated excel upload of cost center plan data.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Manual Planning User Defined Layouts - Create your own layout or copy from standard layout and change it.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Define User Defined Planner Profiles
    Copy the SAPALL to ZSAPALL. You cannot change SAPALL as it is standard.
    In ZSAPALL planner profile, select proper planning area and enter your layout.
    Tick Integrate Excel.
    Once the popup for KP06 comes, you need enter the data and save it. It would generate the file name.
    With the same file name you need upload the plan data by using KP06.
    In KP06
    Extras ==> Excel Planning ==> Upload
    Select the file as prepared in accordance with format at the time of generating the file name.
    Hope this solves your problem.
    Please let me know if you need futher help.
    Regards,
    Ravi

  • Issue on profit center group and profit center group hierarchy

    hi experts
    I have a requirement where i have profit center,profit center group and profit center group hierarchy.
    profit center group and profit center group hierarchy are same?if they are same how to get them into BI.if they are not same how to get them into BI
    im using two datasources 2lis_11_vaitm and 2lis_12_vcitm,how to connect the profit center group and profit center group hierarchy with the datasources,My dataflow is on top of these datasources there are two write optimised dso and on top of those w-o dso there are std dso and on top of the std dso there is a infocube.on infocube there is multiprovider
    Thanks,
    sivaram

    Hi Sivaram,
    Profit Center would be an attribute of any object which is used in the 2lis datasources. maybe CO Order or WBS etc...from these objects Profit Center should be or could be made as navigational attribute.
    Further you can load the master data and hierarchy from the datasource 0PROFIT_CTR_0106_HIER
    Hope this helps.
    Good Luck.
    Vikram

  • Profit center hierarchy and cost center hierarchy

    Hi
    What are the things we have to consider to create Profit center hierarchy and cost center hierarchy  and what is the need to assign profit center hierarchy to profit center and cost center hierarchy to cost center. What levels does this fall into? Can some one please guide me.
    Thanks.

    As you would for any other infoobject
    Activate the business content hierarchy datasources on R3 for cost centre and profit centre
    Go into BW - replicate the metadata
    Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
    Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
    Then repeat new infopackages for all hierachies

  • Function module for Profit Center group and Cost Center group changes

    All,
    The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
    I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
    Help is much appreciated.
    Regards,
    Hari

    All,
    The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
    I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
    Help is much appreciated.
    Regards,
    Hari

  • Profit center field and internal order field in sales order

    Hello all,
    I am unable to find the settings for profit center field and internal order field in sales order account assignment tab screen. kindly let me know the path and configuration settings.
    Thanks in advance
    Regards
    srinivas

    Hi Srinivas
    If you want to assign the profit center then make sure that the Profit center is assigned in MMR->Sales orgn 1 view . 
    But to assign the Profit center in MMR also you need to configure the Profit center first for your Material in your company code with the help of FI/CO consultants and then assign then the profit center will flow from MMR to sales order  item data->account assignment tab
    Regards
    Srinath

  • Profit center dummy and company code XX01 are not consistent

    Hi Gurus ,
    can you please tell what i should do when the system gives the message that Profit center dummy and company code XX01 are not consistent . this is happening when i post document in FB50.

    Owing to program or transport errors, the company code assignment of profit centers may not be stored correctly.
    This inconsistent data then causes program terminations or short dumps in further processing.
    This note contains the report ZPCA40B_CHECK_CEPC_BUKRS, which checks the consistency of the company code assignment and corrects possible errors.
    REfer to OSS <a href="https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=388178&_NLANG=E">388178</a>

  • Profit Center Plans not updated in the reports

    Dear All
    We have an issue with the COPA Plan allocations.  We have several versions that we use for planning.
    We have run  the plan allocatins in 0 version and the figures have flowed from Cost cneter to profiot center to copa.
    for other versions, the plans have gone into COPA, however does not appear in the profit center reports, the cost center balance also has become zero.
    Do you have any idea what the root cause could be?
    (Profit center line itesm are activated for these versions.,)
    Thanks
    Gayani
    Edited by: gayani16k on Jun 13, 2011 6:38 PM

    Hi
    You can try IMG > Financial Accounting (New) > General Ledger Accounting (New) > Planning > Transfer Planning Data from CO-OM
    May be the integrated plan setings was not activated for these versions
    br, Ajay M

Maybe you are looking for