Profit center required in cost center

Hi All
How can i make profit center field is required in the cost center master data?
Please anybody give the idea
Regards
Sekhar

hi
T code is KEAO1 there u can activate profit centre
path is /nspro -
> controlling  -
> cost centre accounting -
>enterprise organization  -
>master data -
> cost centre -
> Activate inactive cost centre
if useful assign points..........
regards,
santosh kumar

Similar Messages

  • Profit Center deriviation from Cost Center

    Hi all,
    I have just configured CCA and PCA for one of our new company code.
    I have created 3 cost centers like A, B, C and subsequently same have been created as profit centers too.
    Maintained the profit center in the cost center master data.
    No other derivation rules has been configured so far.
    Now i am trying to do a expense posting with F-02, after entering cost center, system is updating profit center field with a dummy profit center only.
    Even i f a changed the dummy to normal profit center, again system replacing the normal PC with dummy PC.
    I want like...when i enter CC as A, then i need to derive PC also as A for the line item. ( For both expense items as well as revenue items).
    Please suggest.
    Regards,
    Srinu

    Hi Chintan,
    Thanks for your quick response.
    We have already implemented the said SAP note.
    Let me explain my requirement again.
    We have IOA, CCA, PCA active in our system.
    For every expense or revenue line item Internal order is mandatory.
    apart from we have 3 cost centers and 3 profit centers ( 1:1 )
    in cost center master , profit center is assigned.
    1) users are going to decide the cost center, while posting FI direct entries only. So while doing F-02, they will enter CC, and IO manually and at the same time PC should derive from cost center master data ( as it is 1:1 only).
    2) as specified above, we have IOA, CCA, PCA active. In this case IO, CC, PC are to be set as mandatory fields for Field Status Groups G004 and G029?
    Please advise...
    Regards,
    Srinu

  • Function module for Profit Center group and Cost Center group changes

    All,
    The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
    I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
    Help is much appreciated.
    Regards,
    Hari

    All,
    The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
    I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
    Help is much appreciated.
    Regards,
    Hari

  • Profit Center Mandatory in Cost Center Master

    Hi Expert!
    I would like to know the configuration path to make the option Profit Center Mandatory in cost center master data.
    Thanks
    J

    If you have activated profit center accounting and if you leave profit center blank in the cost center master, system issues a warning message at the time of saving. You can convert this message to error to make profit center mandatory.
    The message number is KS096. It can be configured in transaction code OBA5. Choose application area KS. Insert message 096 and select the desired message type (E for error or W for warning).
    Regards
    Rakesh Pawaskar

  • Profit center accounting and cost center relationship

    Experts, in the future as we look to tie the PCA cube with the CO cube, the referential integrity will be important.  What I see as being important is capturing the profit center, cost center and account that was used at the transactional level and not from an arbitrary hierarchy.  As such, in the PCA cube, it would be optimal to have the cost center assigned to the transaction be available.  This assumes that the PCA totals are by profit center, cost center and account.  Furthermore, I will want to build a jump target from the PCA cube to the CO cube where we can see this data by cost center and cost element or vice versa.  There seems to be some uncertainty on if the PCA cube has the cost center informaiton, so how would I do this?

    I don know if i understood it correctly but If you assign you profit center in your cost center you should be able to get all that you need.
    Assign points if helpful

  • Changes to Profit center assigned to cost center

    Hi
    We have a scnario in which the profit center assigned to the cost center master has to be changed. We have been advised also to  change the validity period of the same from the date of change of the profit center .However, the cost center has been used to for some data postings with the old profit center maintained in the cost center master. Now my query is:
    1. What is the impact of changing the profit center in cost center master? In our case, some data has been posted to the cost center when the old profit center was maintained.
    2. Why should we change the validity period of the cost center after changing the profit center assigned to the cost center?
    3. Also, what is the way to transfer the entries which have been posted to the old profit center to the new profit center?
    Regards
    Sanil Bhandari

    hi,
    1) The impact of profit center is more in the cost center. when ever we assign profit center to cost center. the cost will be updated automatically. so there is no direct posting in profit center only statstical posting are generated.
    2) second one when we want to create profit center first chek it out profit center valid and upto. if same is not maintained in creation of cost center . so u must have to change the validity periods
    3) i am not sure this one i thing 7KEH OR 1KEF TC is there any way tommorow i will give the answer this questions.
          if my answers are wrong plz correct and replay to my id [email protected]
    thank you

  • Profit center hierarchy and cost center hierarchy

    Hi
    What are the things we have to consider to create Profit center hierarchy and cost center hierarchy  and what is the need to assign profit center hierarchy to profit center and cost center hierarchy to cost center. What levels does this fall into? Can some one please guide me.
    Thanks.

    As you would for any other infoobject
    Activate the business content hierarchy datasources on R3 for cost centre and profit centre
    Go into BW - replicate the metadata
    Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
    Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
    Then repeat new infopackages for all hierachies

  • Can we change existing profitcenter to  new profit center  of a cost center

    hai,
    can we change existing profitcenter to  new profit center  of a cost center in ks02
    is there any problem in alredy existing data related to that cost center

    Hi,
    If data is already there for the Cost centre with old profit center the change of profit center is not possible.
    If you transfer the data to other costcenter then i think you can change the Profit center.
    Just try this.
    Regards
    Balaji

  • Change the profit center of the cost center.

    Hi Friends,
    I want to change the profit center of the one cost center but system is not allowing because the posting done against this cost center. i transfer the value of that cost center in other cost center then i tried but system dose not allow.
    following error is coming.
    Changing profit center from 101257 to 101271 is not permitted
    Message no. FAGL_ORG_UNITS011
    please provide the solution.
    Regards,
    MAhesh

    HI,
    system behaviour is explained in SAPNET note 1358080, there you find also how to change the message. Check the consequences carefully in test client...
    best regards, Christian

  • Transaction data from one cost center to another cost center

    Hi All
    Can any one tel me how to move the Transaction data from one cost center to another cost center .
    My scenario is basically : Users posted for  company code 1003 for Cost center S00570 for the period 01.04.2007  to 30.11.2007 but it has to go to company code 1000  instead of 1003  for the same Cost center .S00570 .
    What we have done is that we have changed the cost center from 01.12.2007 on words to the correct company code 1000 and now all postings are going to the right company code ie
    to company code 1000.
    Now the problem is how to bring back the old historical data posted  from 01.04.2007 to 30.11.2007  to wrong company code the 1003 to correct company code  1000 .
    Is there a way to bring back the historical data which has posted to wrong company code .
    Thanks in Advance .
    Any help highly appreciated and points are assigned .
    Cheers
    Ravindra.

    Ravindra
    Once you have changed the company code in the master data, then the entries with respect to the different company code cannot be transferred. Please follow the process below and let me know if it works.
    1. Revert the cost center master data to the original company code.
    2. Repost the line items from this cost center to another cost center. Use tcode KB61. The cost center you will be reposting will be a routing cost center (say XXXXX).
    3. Once all the line items have been reposted, change the master data of the cost center to the correct company code.
    4. Again repost the costs from the routing cost center(XXXXX) to the correct cost center. You should have all the line items to the correct cost center now.
    For more on reposting refer the link below:
    http://help.sap.com/SAPHELP_470/Helpdata/EN/27/c98a46db7011d1a5400060086e9494/frameset.htm
    Let me know if it worked.
    Karthik Coneru

  • Profit Center mandatory for Cost Center

    Hi,
    How do we make the profit center field in the cost center master data as optional instead of required.
    Thanks,
    Venkat

    If you have activated profit center accounting and if you leave profit center blank in the cost center master, system issues a warning message at the time of saving. You can convert this message to error to make profit center mandatory.
    Regards
    Rakesh Pawaskar

  • TAX code requires default cost center

    Hi,
    There is an error coming while posting the MIRO Invoice with tax code ( need to be charge to PL Account) " put the cost center " for GL Account for tax code. This is  a cost element & hence requires cost center but the field for entring tax posting. Issue we are facing is that we are forced to default the cost center as screen is not input enabled(greyed) for cost center in tax calculation screen & it is also not picking up the cost center from purchase order screen.
    Need to know any solution for this issue.
    Regards,
    Vipin

    Hello,
    Kindly refer to the thread to resolve your issue here.
    Table for user attribute data
    Thanks & Best Regards,
    Rahul

  • P&L by Profit Center Wise and COst Center wise

    Hi All,
    Profit Center Reporting u2013 I need a P&L by Profit Center.  Unfortunately in SAP, there is no way to u201Cmarryu201D the profit center and cost center accounting into a single report that is filtered by PC/CC.   Example:  I need to see the P&L for my Orlando region (Profit Center and Cost Center Range = 5450 to 5459).  The report should return exactly what is returned when I run a company-wide P&L through standard report:  S_ALR_87012284.
    In fact, if I could simply filter the standard report in SAP there would be no problem, but there is no way to do that successfully u2013 the filters inhibit the correct results.  Also, the standard profit center reports are only provided at the line level, so the report is so ugly it cannot be evaluated like a simple P&L whereas S_ALR_87012284 draws upon a u201Cdesignu201D called Financial Statement Version (which I have manipulated to be what I need).
    Thanks,
    Madhu

    Hi, Go to tcode KDH1 and maintain your account group (like 127) as following format. I am 100% sure this will be result as per your wish. Execute report S_ALR_87013340 give Profit Center and Group as you created.
    127     Profit After Taxation                         
         129     Provision for Taxation                    
              201     Provision for taxation               
         128     Profit Before Taxation                    
              130     Operating Profit               
                   210     Gross Profit          
                        310     Sales     
                             400     External Sales
                             711001     Whole Sale
                             711002     Retail
                             711003     Direct
    Feel free to come back incase.

  • Profit center compulsory in cost center master

    Hi,
    Would anyone know how to render compulsory the profit center when creating a cost center?
    With regards,
    Ronan

    Fixed value: KS, short text: RK-S master data maintenance.
    b) Release 4.6: Add message class 'KS' to view V_T100SA.For this purpose, call Transaction SM31, enter view V_T100SA and choose 'Maintain'. Add application area 'KS'.
    c) <= 4.6C: Using Transaction SM31, add the following entry to table T100S: Application area   MsgNo   Allowed   Standard   Switch Off
    KS                 096    IWE       W          X
    Now you can use Transaction OBA5 to change message KS096 to information message / error message or to deactivate the message completely.

  • Change profit center assignment in cost center

    Hi All,
    We have around 20 cost centers and assigned to 10 different profit centers.From 01/01/2011,we would like to change Profit center assignment in cost centers.
    all cost centers postings should post to old profit centers till 12/31/2010 and from 01/01/2011,postings should go to new profit centers.
    What is the best way to achieve this?any help is appreciated.
    Thanks,
    Anusha

    Hi Ajay,
    Thanks for your reply.profit center changes are working with analysis period changes.
    i have one more issue here,i can't change hierarchy in cost center and getting errors..
    Message no. KS042
    Diagnosis
    Field Hierarchy Area to be changed must be unique for the entire interval. You selected a change interval which does not include the entire period. Any change in the field would result in an inconsistency.
    I have try to change time depended field in configuration.system is not allowing for field "KHINR" in OKEG TC.
    any help is appreciated...
    Thanks,
    Anusha

Maybe you are looking for